! Started logfile: J1607-2039_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:30 2019 obs J1607-2039_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1607-2039_S_2017_10_21_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.898021 visibilities/baseline/integration-bin. ! Found source: J1607-2039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 9440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-2039_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977592Jy sigma=0.008145 ! Fit after self-cal, rms=0.941559Jy sigma=0.007853 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=17.53 mas, bpa=-17.62 degrees ! Estimated noise=1634.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.043795 Jy ! Component: 100 - total flux cleaned = 0.0560956 Jy ! Total flux subtracted in 100 components = 0.0560956 Jy ! Clean residual min=-0.005675 max=0.006221 Jy/beam ! Clean residual mean=-0.000013 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.0560956 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0560956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092161Jy sigma=0.000715 ! Fit after self-cal, rms=0.091659Jy sigma=0.000711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=19.82 mas, bpa=-17.29 degrees ! Estimated noise=1026.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117685 Jy ! Component: 100 - total flux cleaned = 0.0185248 Jy ! Component: 150 - total flux cleaned = 0.0226683 Jy ! Component: 200 - total flux cleaned = 0.0254801 Jy ! Total flux subtracted in 200 components = 0.0254801 Jy ! Clean residual min=-0.004808 max=0.003899 Jy/beam ! Clean residual mean=-0.000018 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.0815758 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 72 components and 0.0815758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090078Jy sigma=0.000697 ! Fit after self-cal, rms=0.089919Jy sigma=0.000696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 1.06 KP 1.08 ! LA 1.09 MK 1.12 NL 1.04 OV 0.99 ! PT 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.02 KP 1.01 ! LA 0.98 MK 1.04 NL 1.11 OV 1.23 ! PT 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.04 KP 1.05 ! LA 0.82 MK 1.14 NL 1.17 OV 0.94 ! PT 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.84 KP 1.00* ! LA 0.81 MK 0.90 NL 1.00* OV 1.00* ! PT 0.73 ! ! ! Fit before self-cal, rms=0.089919Jy sigma=0.000696 ! Fit after self-cal, rms=0.087866Jy sigma=0.000690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=20.07 mas, bpa=-17.14 degrees ! Estimated noise=1018.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120652 Jy ! Component: 100 - total flux cleaned = 0.0012804 Jy ! Component: 150 - total flux cleaned = 0.00134576 Jy ! Component: 200 - total flux cleaned = 0.00143478 Jy ! Total flux subtracted in 200 components = 0.00143478 Jy ! Clean residual min=-0.002576 max=0.003186 Jy/beam ! Clean residual mean=0.000000 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0830106 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 81 components and 0.0830106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087817Jy sigma=0.000689 ! Fit after self-cal, rms=0.088069Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088069Jy sigma=0.000688 ! Fit after self-cal, rms=0.088798Jy sigma=0.000688 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=20.04 mas, bpa=-17.1 degrees ! Estimated noise=1022.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736212 Jy ! Component: 100 - total flux cleaned = 0.000868762 Jy ! Component: 150 - total flux cleaned = 0.000896841 Jy ! Component: 200 - total flux cleaned = 0.000922738 Jy ! Total flux subtracted in 200 components = 0.000922738 Jy ! Clean residual min=-0.002548 max=0.003171 Jy/beam ! Clean residual mean=-0.000000 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.0839333 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.0839333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088771Jy sigma=0.000688 ! Fit after self-cal, rms=0.088918Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (71, -78). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289354 Jy ! Component: 100 - total flux cleaned = 0.00382648 Jy ! Component: 150 - total flux cleaned = 0.00420374 Jy ! Component: 200 - total flux cleaned = 0.00420742 Jy ! Total flux subtracted in 200 components = 0.00420742 Jy ! Clean residual min=-0.002294 max=0.002321 Jy/beam ! Clean residual mean=0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0881407 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 128 components and 0.0881407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088803Jy sigma=0.000687 ! Fit after self-cal, rms=0.088736Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088736Jy sigma=0.000687 ! Fit after self-cal, rms=0.088489Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=20.02 mas, bpa=-17.08 degrees ! Estimated noise=1017.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133598 Jy ! Component: 100 - total flux cleaned = 0.0016019 Jy ! Component: 150 - total flux cleaned = 0.00165403 Jy ! Component: 200 - total flux cleaned = 0.00153177 Jy ! Total flux subtracted in 200 components = 0.00153177 Jy ! Clean residual min=-0.002237 max=0.002229 Jy/beam ! Clean residual mean=0.000002 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0896725 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 153 components and 0.0896725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088429Jy sigma=0.000686 ! Fit after self-cal, rms=0.088468Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665991 Jy ! Component: 100 - total flux cleaned = 0.000708105 Jy ! Component: 150 - total flux cleaned = 0.000510677 Jy ! Component: 200 - total flux cleaned = 0.000330334 Jy ! Total flux subtracted in 200 components = 0.000330334 Jy ! Clean residual min=-0.002159 max=0.002137 Jy/beam ! Clean residual mean=0.000002 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0900028 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 168 components and 0.0900028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088428Jy sigma=0.000686 ! Fit after self-cal, rms=0.088419Jy sigma=0.000686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088419Jy sigma=0.000686 ! Fit after self-cal, rms=0.088366Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.755 mas, bmaj=28.2 mas, bpa=-6.671 degrees ! Estimated noise=1205.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.93582e-05 Jy ! Component: 100 - total flux cleaned = -0.000115292 Jy ! Component: 150 - total flux cleaned = -0.0003486 Jy ! Component: 200 - total flux cleaned = -0.000585446 Jy ! Total flux subtracted in 200 components = -0.000585446 Jy ! Clean residual min=-0.002340 max=0.002313 Jy/beam ! Clean residual mean=0.000004 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0894174 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 200 components and 0.0894174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088345Jy sigma=0.000685 ! Fit after self-cal, rms=0.088363Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103746 Jy ! Component: 100 - total flux cleaned = -0.000360255 Jy ! Component: 150 - total flux cleaned = -0.00056356 Jy ! Component: 200 - total flux cleaned = -0.000780069 Jy ! Total flux subtracted in 200 components = -0.000780069 Jy ! Clean residual min=-0.002320 max=0.002263 Jy/beam ! Clean residual mean=0.000004 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0886373 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 213 components and 0.0886373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088347Jy sigma=0.000685 ! Fit after self-cal, rms=0.088339Jy sigma=0.000685 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=20.02 mas, bpa=-17.07 degrees ! Estimated noise=1013.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 20.02 at -17.07 degrees (North through East) ! Clean map min=-0.0029908 max=0.056194 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.683 mas, bmaj=17.61 mas, bpa=-17.32 degrees ! Estimated noise=1650.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429456 Jy ! Component: 100 - total flux cleaned = 0.0559282 Jy ! Component: 150 - total flux cleaned = 0.0635635 Jy ! Component: 200 - total flux cleaned = 0.0690981 Jy ! Total flux subtracted in 200 components = 0.0690981 Jy ! Clean residual min=-0.005334 max=0.004404 Jy/beam ! Clean residual mean=-0.000008 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.0690981 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0690981 Jy ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=20.02 mas, bpa=-17.07 degrees ! Estimated noise=1013.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731755 Jy ! Component: 100 - total flux cleaned = 0.0115726 Jy ! Component: 150 - total flux cleaned = 0.013989 Jy ! Component: 200 - total flux cleaned = 0.0155498 Jy ! Total flux subtracted in 200 components = 0.0155498 Jy ! Clean residual min=-0.003226 max=0.002467 Jy/beam ! Clean residual mean=-0.000003 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.084648 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 71 components and 0.084648 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.755 mas, bmaj=28.2 mas, bpa=-6.671 degrees ! Estimated noise=1205.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233035 Jy ! Component: 100 - total flux cleaned = 0.00288612 Jy ! Component: 150 - total flux cleaned = 0.00335279 Jy ! Component: 200 - total flux cleaned = 0.00375114 Jy ! Total flux subtracted in 200 components = 0.00375114 Jy ! Clean residual min=-0.002736 max=0.002779 Jy/beam ! Clean residual mean=0.000002 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0883991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228832 Jy ! Component: 100 - total flux cleaned = 7.14051e-05 Jy ! Component: 150 - total flux cleaned = 2.34884e-05 Jy ! Component: 200 - total flux cleaned = -2.2266e-05 Jy ! Total flux subtracted in 200 components = -2.2266e-05 Jy ! Clean residual min=-0.002496 max=0.002585 Jy/beam ! Clean residual mean=0.000004 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0883768 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 145 components and 0.0883768 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=20.02 mas, bpa=-17.07 degrees ! Estimated noise=1013.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817434 Jy ! Component: 100 - total flux cleaned = 0.000772867 Jy ! Component: 150 - total flux cleaned = 0.000587173 Jy ! Component: 200 - total flux cleaned = 0.00041584 Jy ! Total flux subtracted in 200 components = 0.00041584 Jy ! Clean residual min=-0.002418 max=0.001804 Jy/beam ! Clean residual mean=0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0887927 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 172 components and 0.0887927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088365Jy sigma=0.000685 ! Fit after self-cal, rms=0.088375Jy sigma=0.000685 wmodel J1607-2039_S_2017_10_21_pus_map.mod ! Writing 172 model components to file: J1607-2039_S_2017_10_21_pus_map.mod wobs J1607-2039_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1607-2039_S_2017_10_21_pus_uvs.fits wwins J1607-2039_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1607-2039_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000933503 Jy ! Component: 100 - total flux cleaned = -0.000995936 Jy ! Component: 150 - total flux cleaned = -0.00105362 Jy ! Component: 200 - total flux cleaned = -0.000918658 Jy ! Component: 250 - total flux cleaned = -0.000842571 Jy ! Component: 300 - total flux cleaned = -0.00074461 Jy ! Component: 350 - total flux cleaned = -0.000651862 Jy ! Component: 400 - total flux cleaned = -0.000607303 Jy ! Component: 450 - total flux cleaned = -0.000479429 Jy ! Component: 500 - total flux cleaned = -0.000458135 Jy ! Component: 550 - total flux cleaned = -0.00041873 Jy ! Component: 600 - total flux cleaned = -0.000419275 Jy ! Component: 650 - total flux cleaned = -0.00041955 Jy ! Component: 700 - total flux cleaned = -0.000418564 Jy ! Component: 750 - total flux cleaned = -0.000314427 Jy ! Component: 800 - total flux cleaned = -0.000297672 Jy ! Component: 850 - total flux cleaned = -0.000314341 Jy ! Component: 900 - total flux cleaned = -0.000329907 Jy ! Component: 950 - total flux cleaned = -0.00028237 Jy ! Component: 1000 - total flux cleaned = -0.00028217 Jy ! Component: 1050 - total flux cleaned = -0.000266853 Jy ! Component: 1100 - total flux cleaned = -0.000222802 Jy ! Component: 1150 - total flux cleaned = -0.000266153 Jy ! Component: 1200 - total flux cleaned = -0.0002661 Jy ! Component: 1250 - total flux cleaned = -0.000293795 Jy ! Component: 1300 - total flux cleaned = -0.000252717 Jy ! Component: 1350 - total flux cleaned = -0.000239277 Jy ! Component: 1400 - total flux cleaned = -0.000252554 Jy ! Component: 1450 - total flux cleaned = -0.000239341 Jy ! Component: 1500 - total flux cleaned = -0.000175143 Jy ! Component: 1550 - total flux cleaned = -0.000162646 Jy ! Component: 1600 - total flux cleaned = -0.00012549 Jy ! Component: 1650 - total flux cleaned = -0.00014999 Jy ! Component: 1700 - total flux cleaned = -0.000149881 Jy ! Component: 1750 - total flux cleaned = -0.000125953 Jy ! Component: 1800 - total flux cleaned = -7.91351e-05 Jy ! Component: 1850 - total flux cleaned = -0.000102695 Jy ! Component: 1900 - total flux cleaned = -0.00012571 Jy ! Component: 1950 - total flux cleaned = -0.000148363 Jy ! Component: 2000 - total flux cleaned = -0.000148344 Jy ! Component: 2050 - total flux cleaned = -0.000181409 Jy ! Component: 2100 - total flux cleaned = -0.000170365 Jy ! Component: 2150 - total flux cleaned = -0.000170221 Jy ! Component: 2200 - total flux cleaned = -0.000159576 Jy ! Component: 2250 - total flux cleaned = -0.000159494 Jy ! Component: 2300 - total flux cleaned = -0.000138545 Jy ! Component: 2350 - total flux cleaned = -9.7321e-05 Jy ! Component: 2400 - total flux cleaned = -7.70031e-05 Jy ! Component: 2450 - total flux cleaned = -5.66788e-05 Jy ! Component: 2500 - total flux cleaned = 3.59028e-06 Jy ! Component: 2550 - total flux cleaned = 6.32563e-05 Jy ! Component: 2600 - total flux cleaned = 0.000102751 Jy ! Component: 2650 - total flux cleaned = 0.000161455 Jy ! Component: 2700 - total flux cleaned = 0.000200238 Jy ! Component: 2750 - total flux cleaned = 0.000229128 Jy ! Component: 2800 - total flux cleaned = 0.000286536 Jy ! Component: 2850 - total flux cleaned = 0.000343529 Jy ! Component: 2900 - total flux cleaned = 0.000381402 Jy ! Component: 2950 - total flux cleaned = 0.000447045 Jy ! Component: 3000 - total flux cleaned = 0.000484324 Jy ! Component: 3050 - total flux cleaned = 0.000539886 Jy ! Component: 3100 - total flux cleaned = 0.000576761 Jy ! Component: 3150 - total flux cleaned = 0.000622531 Jy ! Component: 3200 - total flux cleaned = 0.000677166 Jy ! Component: 3250 - total flux cleaned = 0.000731469 Jy ! Component: 3300 - total flux cleaned = 0.000749424 Jy ! Component: 3350 - total flux cleaned = 0.000767333 Jy ! Component: 3400 - total flux cleaned = 0.000776233 Jy ! Component: 3450 - total flux cleaned = 0.000785103 Jy ! Component: 3500 - total flux cleaned = 0.000758512 Jy ! Component: 3550 - total flux cleaned = 0.000785128 Jy ! Component: 3600 - total flux cleaned = 0.000793919 Jy ! Component: 3650 - total flux cleaned = 0.000785142 Jy ! Component: 3700 - total flux cleaned = 0.000793893 Jy ! Component: 3750 - total flux cleaned = 0.000776469 Jy ! Component: 3800 - total flux cleaned = 0.000793889 Jy ! Component: 3850 - total flux cleaned = 0.000793865 Jy ! Component: 3900 - total flux cleaned = 0.000802502 Jy ! Component: 3950 - total flux cleaned = 0.000785179 Jy ! Component: 4000 - total flux cleaned = 0.000767965 Jy ! Component: 4050 - total flux cleaned = 0.000785198 Jy ! Total flux subtracted in 4096 components = 0.000802377 Jy ! Clean residual min=-0.000494 max=0.000503 Jy/beam ! Clean residual mean=0.000000 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.089595 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 419 components and 0.0895951 Jy ![Exited script file: muppet] wmap "J1607-2039_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 20.02 at -17.07 degrees (North through East) ! Clean map min=-0.0026909 max=0.058702 Jy/beam ! Writing clean map to FITS file: J1607-2039_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0587019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146401 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.748191 0.748191 1.49638 2.99277 5.98553 11.9711 23.9421 47.8843 95.7685 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 20.02 at -17.07 degrees (North through East) ! Clean map min=-0.0026909 max=0.058702 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-2039_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:35 2019