! Started logfile: J1607-2039_S_2017_10_09_pus_uvs.log on Sun May 12 13:15:26 2019 obs J1607-2039_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1607-2039_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.751543 visibilities/baseline/integration-bin. ! Found source: J1607-2039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-2039_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 819 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.950068Jy sigma=0.006768 ! Fit after self-cal, rms=0.928439Jy sigma=0.006617 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=13.92 mas, bpa=-20.85 degrees ! Estimated noise=1589.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548745 Jy ! Component: 100 - total flux cleaned = 0.0696384 Jy ! Total flux subtracted in 100 components = 0.0696384 Jy ! Clean residual min=-0.006672 max=0.007073 Jy/beam ! Clean residual mean=-0.000011 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.0696384 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0696384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098052Jy sigma=0.000661 ! Fit after self-cal, rms=0.097855Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=15.46 mas, bpa=-20.51 degrees ! Estimated noise=947.098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013512 Jy ! Component: 100 - total flux cleaned = 0.0220583 Jy ! Component: 150 - total flux cleaned = 0.0278504 Jy ! Component: 200 - total flux cleaned = 0.0319849 Jy ! Total flux subtracted in 200 components = 0.0319849 Jy ! Clean residual min=-0.003842 max=0.004386 Jy/beam ! Clean residual mean=-0.000013 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.101623 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 78 components and 0.101623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095749Jy sigma=0.000643 ! Fit after self-cal, rms=0.095645Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.92 HN 1.24 KP 1.01 ! LA 0.96 MK 1.05 NL 1.10 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 0.91 HN 1.00 KP 0.98 ! LA 0.97 MK 1.08 NL 1.03 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 0.95 HN 0.98 KP 0.84 ! LA 0.80 MK 1.07 NL 1.13 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 225 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.83 KP 1.00* ! LA 1.00* MK 0.90 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.095645Jy sigma=0.000642 ! Fit after self-cal, rms=0.098112Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=16.09 mas, bpa=-20.62 degrees ! Estimated noise=957.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105765 Jy ! Component: 100 - total flux cleaned = 0.00105458 Jy ! Component: 150 - total flux cleaned = 0.00101249 Jy ! Component: 200 - total flux cleaned = 0.000979481 Jy ! Total flux subtracted in 200 components = 0.000979481 Jy ! Clean residual min=-0.003165 max=0.003798 Jy/beam ! Clean residual mean=-0.000006 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.102603 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 85 components and 0.102603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098060Jy sigma=0.000639 ! Fit after self-cal, rms=0.098182Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098182Jy sigma=0.000638 ! Fit after self-cal, rms=0.099704Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=16.24 mas, bpa=-20.65 degrees ! Estimated noise=961.113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220024 Jy ! Component: 100 - total flux cleaned = 0.000257213 Jy ! Component: 150 - total flux cleaned = 0.000228113 Jy ! Component: 200 - total flux cleaned = 0.000153084 Jy ! Total flux subtracted in 200 components = 0.000153084 Jy ! Clean residual min=-0.003058 max=0.003830 Jy/beam ! Clean residual mean=-0.000006 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.102756 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 86 components and 0.102756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099679Jy sigma=0.000638 ! Fit after self-cal, rms=0.099684Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262666 Jy ! Component: 100 - total flux cleaned = 0.00353249 Jy ! Component: 150 - total flux cleaned = 0.00435191 Jy ! Component: 200 - total flux cleaned = 0.00506176 Jy ! Total flux subtracted in 200 components = 0.00506176 Jy ! Clean residual min=-0.002419 max=0.002319 Jy/beam ! Clean residual mean=-0.000003 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.107818 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 129 components and 0.107818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099520Jy sigma=0.000637 ! Fit after self-cal, rms=0.099466Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099466Jy sigma=0.000636 ! Fit after self-cal, rms=0.100684Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=16.37 mas, bpa=-20.73 degrees ! Estimated noise=960.988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011643 Jy ! Component: 100 - total flux cleaned = 0.00168428 Jy ! Component: 150 - total flux cleaned = 0.00213788 Jy ! Component: 200 - total flux cleaned = 0.00254472 Jy ! Total flux subtracted in 200 components = 0.00254472 Jy ! Clean residual min=-0.002090 max=0.001972 Jy/beam ! Clean residual mean=-0.000004 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.110362 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 164 components and 0.110362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100620Jy sigma=0.000635 ! Fit after self-cal, rms=0.100636Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000717363 Jy ! Component: 100 - total flux cleaned = 0.000904521 Jy ! Component: 150 - total flux cleaned = 0.000972061 Jy ! Component: 200 - total flux cleaned = 0.000972642 Jy ! Total flux subtracted in 200 components = 0.000972642 Jy ! Clean residual min=-0.001961 max=0.001960 Jy/beam ! Clean residual mean=-0.000003 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.111335 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 178 components and 0.111335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100607Jy sigma=0.000634 ! Fit after self-cal, rms=0.100593Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100593Jy sigma=0.000634 ! Fit after self-cal, rms=0.101280Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.735 mas, bmaj=22.1 mas, bpa=-11.34 degrees ! Estimated noise=1141.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741368 Jy ! Component: 100 - total flux cleaned = 0.00076658 Jy ! Component: 150 - total flux cleaned = 0.000809689 Jy ! Component: 200 - total flux cleaned = 0.000847858 Jy ! Total flux subtracted in 200 components = 0.000847858 Jy ! Clean residual min=-0.001951 max=0.001957 Jy/beam ! Clean residual mean=-0.000005 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.112183 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 200 components and 0.112183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101268Jy sigma=0.000634 ! Fit after self-cal, rms=0.101262Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321492 Jy ! Component: 100 - total flux cleaned = 0.000425092 Jy ! Component: 150 - total flux cleaned = 0.000475518 Jy ! Component: 200 - total flux cleaned = 0.000490632 Jy ! Total flux subtracted in 200 components = 0.000490632 Jy ! Clean residual min=-0.001910 max=0.001914 Jy/beam ! Clean residual mean=-0.000004 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.112673 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 231 components and 0.112673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101257Jy sigma=0.000634 ! Fit after self-cal, rms=0.101258Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=16.41 mas, bpa=-20.75 degrees ! Estimated noise=962.373 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.188 x 16.41 at -20.75 degrees (North through East) ! Clean map min=-0.0042735 max=0.072956 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=14.6 mas, bpa=-21.13 degrees ! Estimated noise=1658.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547026 Jy ! Component: 100 - total flux cleaned = 0.0695227 Jy ! Component: 150 - total flux cleaned = 0.0790399 Jy ! Component: 200 - total flux cleaned = 0.0862225 Jy ! Total flux subtracted in 200 components = 0.0862225 Jy ! Clean residual min=-0.004465 max=0.004138 Jy/beam ! Clean residual mean=-0.000007 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.0862225 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0862225 Jy ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=16.41 mas, bpa=-20.75 degrees ! Estimated noise=962.373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00757093 Jy ! Component: 100 - total flux cleaned = 0.0125422 Jy ! Component: 150 - total flux cleaned = 0.0161452 Jy ! Component: 200 - total flux cleaned = 0.0178316 Jy ! Total flux subtracted in 200 components = 0.0178316 Jy ! Clean residual min=-0.002916 max=0.002474 Jy/beam ! Clean residual mean=-0.000008 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.104054 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 68 components and 0.104054 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.735 mas, bmaj=22.1 mas, bpa=-11.34 degrees ! Estimated noise=1141.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322371 Jy ! Component: 100 - total flux cleaned = 0.00420368 Jy ! Component: 150 - total flux cleaned = 0.00487506 Jy ! Component: 200 - total flux cleaned = 0.00525508 Jy ! Total flux subtracted in 200 components = 0.00525508 Jy ! Clean residual min=-0.002419 max=0.002194 Jy/beam ! Clean residual mean=-0.000008 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.109309 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332932 Jy ! Component: 100 - total flux cleaned = 0.000670696 Jy ! Component: 150 - total flux cleaned = 0.000924152 Jy ! Component: 200 - total flux cleaned = 0.00122096 Jy ! Total flux subtracted in 200 components = 0.00122096 Jy ! Clean residual min=-0.002186 max=0.001972 Jy/beam ! Clean residual mean=-0.000007 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.11053 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 165 components and 0.11053 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=16.41 mas, bpa=-20.75 degrees ! Estimated noise=962.373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479723 Jy ! Component: 100 - total flux cleaned = 0.000438955 Jy ! Component: 150 - total flux cleaned = 0.000360987 Jy ! Component: 200 - total flux cleaned = 0.000288933 Jy ! Total flux subtracted in 200 components = 0.000288933 Jy ! Clean residual min=-0.002121 max=0.001982 Jy/beam ! Clean residual mean=-0.000003 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.110819 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 186 components and 0.110819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101277Jy sigma=0.000634 ! Fit after self-cal, rms=0.101221Jy sigma=0.000634 wmodel J1607-2039_S_2017_10_09_pus_map.mod ! Writing 186 model components to file: J1607-2039_S_2017_10_09_pus_map.mod wobs J1607-2039_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1607-2039_S_2017_10_09_pus_uvs.fits wwins J1607-2039_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1607-2039_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.61412e-06 Jy ! Component: 100 - total flux cleaned = -0.000213373 Jy ! Component: 150 - total flux cleaned = -0.000377388 Jy ! Component: 200 - total flux cleaned = -0.000565718 Jy ! Component: 250 - total flux cleaned = -0.000776987 Jy ! Component: 300 - total flux cleaned = -0.000979054 Jy ! Component: 350 - total flux cleaned = -0.00111822 Jy ! Component: 400 - total flux cleaned = -0.00122575 Jy ! Component: 450 - total flux cleaned = -0.00125144 Jy ! Component: 500 - total flux cleaned = -0.00125184 Jy ! Component: 550 - total flux cleaned = -0.00130058 Jy ! Component: 600 - total flux cleaned = -0.00132454 Jy ! Component: 650 - total flux cleaned = -0.00137018 Jy ! Component: 700 - total flux cleaned = -0.00137051 Jy ! Component: 750 - total flux cleaned = -0.00145683 Jy ! Component: 800 - total flux cleaned = -0.0013928 Jy ! Component: 850 - total flux cleaned = -0.00145476 Jy ! Component: 900 - total flux cleaned = -0.0015348 Jy ! Component: 950 - total flux cleaned = -0.00159334 Jy ! Component: 1000 - total flux cleaned = -0.00159329 Jy ! Component: 1050 - total flux cleaned = -0.00161247 Jy ! Component: 1100 - total flux cleaned = -0.0016863 Jy ! Component: 1150 - total flux cleaned = -0.00168575 Jy ! Component: 1200 - total flux cleaned = -0.00159649 Jy ! Component: 1250 - total flux cleaned = -0.0015793 Jy ! Component: 1300 - total flux cleaned = -0.00157913 Jy ! Component: 1350 - total flux cleaned = -0.00154497 Jy ! Component: 1400 - total flux cleaned = -0.00152823 Jy ! Component: 1450 - total flux cleaned = -0.00159367 Jy ! Component: 1500 - total flux cleaned = -0.00159375 Jy ! Component: 1550 - total flux cleaned = -0.00165772 Jy ! Component: 1600 - total flux cleaned = -0.00168902 Jy ! Component: 1650 - total flux cleaned = -0.00167389 Jy ! Component: 1700 - total flux cleaned = -0.00176575 Jy ! Component: 1750 - total flux cleaned = -0.00182582 Jy ! Component: 1800 - total flux cleaned = -0.00189982 Jy ! Component: 1850 - total flux cleaned = -0.001929 Jy ! Component: 1900 - total flux cleaned = -0.00200095 Jy ! Component: 1950 - total flux cleaned = -0.00205801 Jy ! Component: 2000 - total flux cleaned = -0.00212838 Jy ! Component: 2050 - total flux cleaned = -0.00217008 Jy ! Component: 2100 - total flux cleaned = -0.00221159 Jy ! Component: 2150 - total flux cleaned = -0.00227987 Jy ! Component: 2200 - total flux cleaned = -0.00233361 Jy ! Component: 2250 - total flux cleaned = -0.00236045 Jy ! Component: 2300 - total flux cleaned = -0.00241346 Jy ! Component: 2350 - total flux cleaned = -0.00249193 Jy ! Component: 2400 - total flux cleaned = -0.00254363 Jy ! Component: 2450 - total flux cleaned = -0.00260766 Jy ! Component: 2500 - total flux cleaned = -0.0026457 Jy ! Component: 2550 - total flux cleaned = -0.00269606 Jy ! Component: 2600 - total flux cleaned = -0.00273363 Jy ! Component: 2650 - total flux cleaned = -0.00283259 Jy ! Component: 2700 - total flux cleaned = -0.00284489 Jy ! Component: 2750 - total flux cleaned = -0.00291775 Jy ! Component: 2800 - total flux cleaned = -0.00294179 Jy ! Component: 2850 - total flux cleaned = -0.00297774 Jy ! Component: 2900 - total flux cleaned = -0.00301323 Jy ! Component: 2950 - total flux cleaned = -0.00304838 Jy ! Component: 3000 - total flux cleaned = -0.00312982 Jy ! Component: 3050 - total flux cleaned = -0.00311831 Jy ! Component: 3100 - total flux cleaned = -0.00316404 Jy ! Component: 3150 - total flux cleaned = -0.00317538 Jy ! Component: 3200 - total flux cleaned = -0.00319798 Jy ! Component: 3250 - total flux cleaned = -0.00320912 Jy ! Component: 3300 - total flux cleaned = -0.00320921 Jy ! Component: 3350 - total flux cleaned = -0.00322029 Jy ! Component: 3400 - total flux cleaned = -0.00330782 Jy ! Component: 3450 - total flux cleaned = -0.00338391 Jy ! Component: 3500 - total flux cleaned = -0.00344875 Jy ! Component: 3550 - total flux cleaned = -0.00350235 Jy ! Component: 3600 - total flux cleaned = -0.00355562 Jy ! Component: 3650 - total flux cleaned = -0.00358746 Jy ! Component: 3700 - total flux cleaned = -0.00362963 Jy ! Component: 3750 - total flux cleaned = -0.00368205 Jy ! Component: 3800 - total flux cleaned = -0.0037237 Jy ! Component: 3850 - total flux cleaned = -0.00378591 Jy ! Component: 3900 - total flux cleaned = -0.00379624 Jy ! Component: 3950 - total flux cleaned = -0.00386791 Jy ! Component: 4000 - total flux cleaned = -0.00391888 Jy ! Component: 4050 - total flux cleaned = -0.00396952 Jy ! Total flux subtracted in 4096 components = -0.00399988 Jy ! Clean residual min=-0.000666 max=0.000726 Jy/beam ! Clean residual mean=-0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.106819 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 479 components and 0.106819 Jy ![Exited script file: muppet] wmap "J1607-2039_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.188 x 16.41 at -20.75 degrees (North through East) ! Clean map min=-0.0036204 max=0.074241 Jy/beam ! Writing clean map to FITS file: J1607-2039_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0742408 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018417 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.744214 0.744214 1.48843 2.97686 5.95371 11.9074 23.8148 47.6297 95.2594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.188 x 16.41 at -20.75 degrees (North through East) ! Clean map min=-0.0036204 max=0.074241 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-2039_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:15:32 2019