! Started logfile: J1607-2039_S_2017_02_19_pus_uvs.log on Sat May 4 18:54:10 2019 obs J1607-2039_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1607-2039_S_2017_02_19_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.743683 visibilities/baseline/integration-bin. ! Found source: J1607-2039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 19544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-2039_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 250 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 661 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979144Jy sigma=0.006779 ! Fit after self-cal, rms=0.946497Jy sigma=0.006567 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=6.455 mas, bpa=-4.505 degrees ! Estimated noise=1369.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439261 Jy ! Component: 100 - total flux cleaned = 0.0539592 Jy ! Total flux subtracted in 100 components = 0.0539592 Jy ! Clean residual min=-0.004414 max=0.004034 Jy/beam ! Clean residual mean=0.000007 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.0539592 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0539592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099216Jy sigma=0.000643 ! Fit after self-cal, rms=0.098474Jy sigma=0.000638 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.504 mas, bpa=-3.179 degrees ! Estimated noise=823.426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582121 Jy ! Component: 100 - total flux cleaned = 0.00845311 Jy ! Component: 150 - total flux cleaned = 0.0099086 Jy ! Component: 200 - total flux cleaned = 0.0107494 Jy ! Total flux subtracted in 200 components = 0.0107494 Jy ! Clean residual min=-0.002683 max=0.003075 Jy/beam ! Clean residual mean=0.000002 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0647087 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 41 components and 0.0647087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098113Jy sigma=0.000636 ! Fit after self-cal, rms=0.098020Jy sigma=0.000636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.03 KP 1.00 ! LA 1.00 MK 1.05 NL 0.95 OV 1.09 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.10 KP 1.02 ! LA 1.00 MK 1.06 NL 1.03 OV 1.08 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.01 KP 0.95 ! LA 0.84 MK 1.06 NL 1.08 OV 0.96 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.89 KP 1.00* ! LA 0.75 MK 1.02 NL 1.00* OV 0.90 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.098020Jy sigma=0.000636 ! Fit after self-cal, rms=0.096655Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=7.586 mas, bpa=-2.988 degrees ! Estimated noise=823.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301501 Jy ! Component: 100 - total flux cleaned = 0.00473942 Jy ! Component: 150 - total flux cleaned = 0.00588115 Jy ! Component: 200 - total flux cleaned = 0.00665854 Jy ! Total flux subtracted in 200 components = 0.00665854 Jy ! Clean residual min=-0.002020 max=0.001960 Jy/beam ! Clean residual mean=0.000001 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0713672 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 72 components and 0.0713672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096553Jy sigma=0.000633 ! Fit after self-cal, rms=0.096459Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096459Jy sigma=0.000633 ! Fit after self-cal, rms=0.095352Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=7.587 mas, bpa=-2.784 degrees ! Estimated noise=818.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177254 Jy ! Component: 100 - total flux cleaned = 0.00281317 Jy ! Component: 150 - total flux cleaned = 0.00348987 Jy ! Component: 200 - total flux cleaned = 0.0037349 Jy ! Total flux subtracted in 200 components = 0.0037349 Jy ! Clean residual min=-0.001839 max=0.001822 Jy/beam ! Clean residual mean=0.000000 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0751021 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.0751021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095315Jy sigma=0.000632 ! Fit after self-cal, rms=0.095271Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115046 Jy ! Component: 100 - total flux cleaned = 0.00186992 Jy ! Component: 150 - total flux cleaned = 0.00226915 Jy ! Component: 200 - total flux cleaned = 0.00239618 Jy ! Total flux subtracted in 200 components = 0.00239618 Jy ! Clean residual min=-0.001906 max=0.001985 Jy/beam ! Clean residual mean=0.000000 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0774983 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.0774983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095254Jy sigma=0.000632 ! Fit after self-cal, rms=0.095227Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095227Jy sigma=0.000631 ! Fit after self-cal, rms=0.094562Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=7.57 mas, bpa=-2.672 degrees ! Estimated noise=813.812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000959 Jy ! Component: 100 - total flux cleaned = 0.0013798 Jy ! Component: 150 - total flux cleaned = 0.00150882 Jy ! Component: 200 - total flux cleaned = 0.00154032 Jy ! Total flux subtracted in 200 components = 0.00154032 Jy ! Clean residual min=-0.001898 max=0.001988 Jy/beam ! Clean residual mean=-0.000000 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0790386 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 107 components and 0.0790386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094550Jy sigma=0.000631 ! Fit after self-cal, rms=0.094527Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (61, 28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016448 Jy ! Component: 100 - total flux cleaned = 0.00225005 Jy ! Component: 150 - total flux cleaned = 0.00258915 Jy ! Component: 200 - total flux cleaned = 0.00288766 Jy ! Total flux subtracted in 200 components = 0.00288766 Jy ! Clean residual min=-0.001836 max=0.001765 Jy/beam ! Clean residual mean=0.000000 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0819263 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.0819263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094493Jy sigma=0.000631 ! Fit after self-cal, rms=0.094475Jy sigma=0.000631 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094475Jy sigma=0.000631 ! Fit after self-cal, rms=0.094116Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.111 mas, bmaj=15.61 mas, bpa=7.096 degrees ! Estimated noise=1067.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129701 Jy ! Component: 100 - total flux cleaned = 0.00210847 Jy ! Component: 150 - total flux cleaned = 0.00256997 Jy ! Component: 200 - total flux cleaned = 0.00273205 Jy ! Total flux subtracted in 200 components = 0.00273205 Jy ! Clean residual min=-0.001925 max=0.002185 Jy/beam ! Clean residual mean=-0.000000 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0846584 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 156 components and 0.0846584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094102Jy sigma=0.000631 ! Fit after self-cal, rms=0.094093Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000877196 Jy ! Component: 100 - total flux cleaned = 0.00102703 Jy ! Component: 150 - total flux cleaned = 0.00116291 Jy ! Component: 200 - total flux cleaned = 0.00117998 Jy ! Total flux subtracted in 200 components = 0.00117998 Jy ! Clean residual min=-0.001934 max=0.002145 Jy/beam ! Clean residual mean=0.000000 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0858383 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 175 components and 0.0858383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094085Jy sigma=0.000630 ! Fit after self-cal, rms=0.094080Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.557 mas, bpa=-2.632 degrees ! Estimated noise=810.896 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.933 x 7.557 at -2.632 degrees (North through East) ! Clean map min=-0.0017531 max=0.057108 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.294 mas, bmaj=6.449 mas, bpa=-4 degrees ! Estimated noise=1353.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441504 Jy ! Component: 100 - total flux cleaned = 0.0545491 Jy ! Component: 150 - total flux cleaned = 0.0600375 Jy ! Component: 200 - total flux cleaned = 0.0644247 Jy ! Total flux subtracted in 200 components = 0.0644247 Jy ! Clean residual min=-0.003193 max=0.003515 Jy/beam ! Clean residual mean=0.000003 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.0644247 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0644247 Jy ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.557 mas, bpa=-2.632 degrees ! Estimated noise=810.896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475627 Jy ! Component: 100 - total flux cleaned = 0.00811564 Jy ! Component: 150 - total flux cleaned = 0.0107144 Jy ! Component: 200 - total flux cleaned = 0.0128244 Jy ! Total flux subtracted in 200 components = 0.0128244 Jy ! Clean residual min=-0.002159 max=0.002048 Jy/beam ! Clean residual mean=0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0772491 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 56 components and 0.0772491 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.111 mas, bmaj=15.61 mas, bpa=7.096 degrees ! Estimated noise=1067.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267202 Jy ! Component: 100 - total flux cleaned = 0.00448423 Jy ! Component: 150 - total flux cleaned = 0.00553823 Jy ! Component: 200 - total flux cleaned = 0.00633074 Jy ! Total flux subtracted in 200 components = 0.00633074 Jy ! Clean residual min=-0.002161 max=0.002251 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0835799 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608943 Jy ! Component: 100 - total flux cleaned = 0.00105704 Jy ! Component: 150 - total flux cleaned = 0.00141033 Jy ! Component: 200 - total flux cleaned = 0.00165012 Jy ! Total flux subtracted in 200 components = 0.00165012 Jy ! Clean residual min=-0.002083 max=0.002183 Jy/beam ! Clean residual mean=0.000001 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.08523 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 101 components and 0.08523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.557 mas, bpa=-2.632 degrees ! Estimated noise=810.896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143542 Jy ! Component: 100 - total flux cleaned = -7.31265e-05 Jy ! Component: 150 - total flux cleaned = 0.000150512 Jy ! Component: 200 - total flux cleaned = 0.00026687 Jy ! Total flux subtracted in 200 components = 0.00026687 Jy ! Clean residual min=-0.001935 max=0.001845 Jy/beam ! Clean residual mean=0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0854969 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.0854969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094082Jy sigma=0.000630 ! Fit after self-cal, rms=0.094064Jy sigma=0.000630 wmodel J1607-2039_S_2017_02_19_pus_map.mod ! Writing 125 model components to file: J1607-2039_S_2017_02_19_pus_map.mod wobs J1607-2039_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1607-2039_S_2017_02_19_pus_uvs.fits wwins J1607-2039_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J1607-2039_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019299 Jy ! Component: 100 - total flux cleaned = -6.78211e-05 Jy ! Component: 150 - total flux cleaned = 2.05461e-05 Jy ! Component: 200 - total flux cleaned = -3.47588e-05 Jy ! Component: 250 - total flux cleaned = -6.12719e-05 Jy ! Component: 300 - total flux cleaned = 4.20311e-05 Jy ! Component: 350 - total flux cleaned = 0.000116252 Jy ! Component: 400 - total flux cleaned = 0.000188757 Jy ! Component: 450 - total flux cleaned = 0.000235657 Jy ! Component: 500 - total flux cleaned = 0.000190002 Jy ! Component: 550 - total flux cleaned = 0.000212514 Jy ! Component: 600 - total flux cleaned = 0.000146189 Jy ! Component: 650 - total flux cleaned = 8.16902e-05 Jy ! Component: 700 - total flux cleaned = 1.84483e-05 Jy ! Component: 750 - total flux cleaned = -2.28234e-05 Jy ! Component: 800 - total flux cleaned = -4.31602e-05 Jy ! Component: 850 - total flux cleaned = -3.84187e-06 Jy ! Component: 900 - total flux cleaned = -0.000121291 Jy ! Component: 950 - total flux cleaned = -0.000140328 Jy ! Component: 1000 - total flux cleaned = -0.000197143 Jy ! Component: 1050 - total flux cleaned = -0.000215448 Jy ! Component: 1100 - total flux cleaned = -0.000270355 Jy ! Component: 1150 - total flux cleaned = -0.000216056 Jy ! Component: 1200 - total flux cleaned = -0.000269529 Jy ! Component: 1250 - total flux cleaned = -0.000269346 Jy ! Component: 1300 - total flux cleaned = -0.000304166 Jy ! Component: 1350 - total flux cleaned = -0.000354826 Jy ! Component: 1400 - total flux cleaned = -0.000337906 Jy ! Component: 1450 - total flux cleaned = -0.000420858 Jy ! Component: 1500 - total flux cleaned = -0.000486153 Jy ! Component: 1550 - total flux cleaned = -0.000502138 Jy ! Component: 1600 - total flux cleaned = -0.000565863 Jy ! Component: 1650 - total flux cleaned = -0.000628903 Jy ! Component: 1700 - total flux cleaned = -0.000706489 Jy ! Component: 1750 - total flux cleaned = -0.00072183 Jy ! Component: 1800 - total flux cleaned = -0.000737005 Jy ! Component: 1850 - total flux cleaned = -0.000827079 Jy ! Component: 1900 - total flux cleaned = -0.000871424 Jy ! Component: 1950 - total flux cleaned = -0.000871675 Jy ! Component: 2000 - total flux cleaned = -0.000929739 Jy ! Component: 2050 - total flux cleaned = -0.000944118 Jy ! Component: 2100 - total flux cleaned = -0.0010006 Jy ! Component: 2150 - total flux cleaned = -0.00101452 Jy ! Component: 2200 - total flux cleaned = -0.00109754 Jy ! Component: 2250 - total flux cleaned = -0.00111118 Jy ! Component: 2300 - total flux cleaned = -0.00117872 Jy ! Component: 2350 - total flux cleaned = -0.00119209 Jy ! Component: 2400 - total flux cleaned = -0.00125859 Jy ! Component: 2450 - total flux cleaned = -0.00131108 Jy ! Component: 2500 - total flux cleaned = -0.00136304 Jy ! Component: 2550 - total flux cleaned = -0.00137593 Jy ! Component: 2600 - total flux cleaned = -0.00142704 Jy ! Component: 2650 - total flux cleaned = -0.00142719 Jy ! Component: 2700 - total flux cleaned = -0.00150254 Jy ! Component: 2750 - total flux cleaned = -0.0015274 Jy ! Component: 2800 - total flux cleaned = -0.0015768 Jy ! Component: 2850 - total flux cleaned = -0.00157676 Jy ! Component: 2900 - total flux cleaned = -0.00158904 Jy ! Component: 2950 - total flux cleaned = -0.00164918 Jy ! Component: 3000 - total flux cleaned = -0.00164912 Jy ! Component: 3050 - total flux cleaned = -0.00167268 Jy ! Component: 3100 - total flux cleaned = -0.00169601 Jy ! Component: 3150 - total flux cleaned = -0.00171918 Jy ! Component: 3200 - total flux cleaned = -0.00176527 Jy ! Component: 3250 - total flux cleaned = -0.00179949 Jy ! Component: 3300 - total flux cleaned = -0.00184496 Jy ! Component: 3350 - total flux cleaned = -0.00186751 Jy ! Component: 3400 - total flux cleaned = -0.00187875 Jy ! Component: 3450 - total flux cleaned = -0.00193416 Jy ! Component: 3500 - total flux cleaned = -0.00196713 Jy ! Component: 3550 - total flux cleaned = -0.00197808 Jy ! Component: 3600 - total flux cleaned = -0.0019888 Jy ! Component: 3650 - total flux cleaned = -0.00203175 Jy ! Component: 3700 - total flux cleaned = -0.00206384 Jy ! Component: 3750 - total flux cleaned = -0.00209566 Jy ! Component: 3800 - total flux cleaned = -0.00211663 Jy ! Component: 3850 - total flux cleaned = -0.00216876 Jy ! Component: 3900 - total flux cleaned = -0.00215852 Jy ! Component: 3950 - total flux cleaned = -0.00221 Jy ! Component: 4000 - total flux cleaned = -0.00216905 Jy ! Component: 4050 - total flux cleaned = -0.00219953 Jy ! Total flux subtracted in 4096 components = -0.00216931 Jy ! Clean residual min=-0.000629 max=0.000576 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0833276 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 419 components and 0.0833276 Jy ![Exited script file: muppet] wmap "J1607-2039_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.933 x 7.557 at -2.632 degrees (North through East) ! Clean map min=-0.0011949 max=0.05726 Jy/beam ! Writing clean map to FITS file: J1607-2039_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.05726 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175568 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.919845 0.919845 1.83969 3.67938 7.35876 14.7175 29.4351 58.8701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.933 x 7.557 at -2.632 degrees (North through East) ! Clean map min=-0.0011949 max=0.05726 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-2039_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:54:15 2019