! Started logfile: J1606-1929_S_2017_07_16_pus_uvs.log on Thu May 9 11:12:57 2019 obs J1606-1929_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1606-1929_S_2017_07_16_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.386111 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1606-1929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 6672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1606-1929_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 960 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944948Jy sigma=0.006823 ! Fit after self-cal, rms=0.914551Jy sigma=0.006618 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=9.596 mas, bpa=15.16 degrees ! Estimated noise=1871.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0681802 Jy ! Component: 100 - total flux cleaned = 0.0844435 Jy ! Total flux subtracted in 100 components = 0.0844435 Jy ! Clean residual min=-0.007154 max=0.007902 Jy/beam ! Clean residual mean=0.000007 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.0844435 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0844435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093902Jy sigma=0.000641 ! Fit after self-cal, rms=0.093841Jy sigma=0.000641 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=10.6 mas, bpa=13.44 degrees ! Estimated noise=1397.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00841753 Jy ! Component: 100 - total flux cleaned = 0.011964 Jy ! Component: 150 - total flux cleaned = 0.0137799 Jy ! Component: 200 - total flux cleaned = 0.0146983 Jy ! Total flux subtracted in 200 components = 0.0146983 Jy ! Clean residual min=-0.003502 max=0.003677 Jy/beam ! Clean residual mean=0.000003 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.0991418 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 33 components and 0.0991418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093195Jy sigma=0.000635 ! Fit after self-cal, rms=0.093171Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.07 ! LA 1.01 MK 1.00* NL 0.95 OV 1.01 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.06 ! LA 0.90 MK 1.00* NL 0.99 OV 1.03 ! PT 1.07 SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.07 KP 0.99 ! LA 0.98 MK 1.00* NL 0.97 OV 0.99 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.093171Jy sigma=0.000635 ! Fit after self-cal, rms=0.093721Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.673 mas, bmaj=10.65 mas, bpa=13.32 degrees ! Estimated noise=1399.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00087195 Jy ! Component: 100 - total flux cleaned = -0.000842448 Jy ! Component: 150 - total flux cleaned = -0.000817182 Jy ! Component: 200 - total flux cleaned = -0.00074932 Jy ! Total flux subtracted in 200 components = -0.00074932 Jy ! Clean residual min=-0.003396 max=0.003316 Jy/beam ! Clean residual mean=0.000001 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.0983925 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0983925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093700Jy sigma=0.000634 ! Fit after self-cal, rms=0.093745Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093745Jy sigma=0.000634 ! Fit after self-cal, rms=0.093587Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.68 mas, bmaj=10.68 mas, bpa=13.38 degrees ! Estimated noise=1398.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000529905 Jy ! Component: 100 - total flux cleaned = -0.000558106 Jy ! Component: 150 - total flux cleaned = -0.000537089 Jy ! Component: 200 - total flux cleaned = -0.000480525 Jy ! Total flux subtracted in 200 components = -0.000480525 Jy ! Clean residual min=-0.003205 max=0.002947 Jy/beam ! Clean residual mean=0.000001 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.0979119 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.0979119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093573Jy sigma=0.000633 ! Fit after self-cal, rms=0.093583Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137559 Jy ! Component: 100 - total flux cleaned = -9.49206e-05 Jy ! Component: 150 - total flux cleaned = -5.70265e-05 Jy ! Component: 200 - total flux cleaned = -7.01935e-06 Jy ! Total flux subtracted in 200 components = -7.01935e-06 Jy ! Clean residual min=-0.003187 max=0.002976 Jy/beam ! Clean residual mean=0.000001 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0979049 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0979049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093573Jy sigma=0.000633 ! Fit after self-cal, rms=0.093565Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093565Jy sigma=0.000633 ! Fit after self-cal, rms=0.093660Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=10.69 mas, bpa=13.39 degrees ! Estimated noise=1399.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000426813 Jy ! Component: 100 - total flux cleaned = -0.000509987 Jy ! Component: 150 - total flux cleaned = -0.000493639 Jy ! Component: 200 - total flux cleaned = -0.000463471 Jy ! Total flux subtracted in 200 components = -0.000463471 Jy ! Clean residual min=-0.003103 max=0.002950 Jy/beam ! Clean residual mean=0.000001 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0974414 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.0974414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093651Jy sigma=0.000633 ! Fit after self-cal, rms=0.093649Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.65356e-05 Jy ! Component: 100 - total flux cleaned = -7.39767e-05 Jy ! Component: 150 - total flux cleaned = -5.78758e-05 Jy ! Component: 200 - total flux cleaned = -3.01841e-05 Jy ! Total flux subtracted in 200 components = -3.01841e-05 Jy ! Clean residual min=-0.003095 max=0.002971 Jy/beam ! Clean residual mean=0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0974113 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0974113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093642Jy sigma=0.000633 ! Fit after self-cal, rms=0.093635Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093635Jy sigma=0.000633 ! Fit after self-cal, rms=0.093713Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.873 mas, bmaj=16.23 mas, bpa=0.4139 degrees ! Estimated noise=1685.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64714e-05 Jy ! Component: 100 - total flux cleaned = -2.87517e-05 Jy ! Component: 150 - total flux cleaned = -4.82664e-05 Jy ! Component: 200 - total flux cleaned = -6.61578e-05 Jy ! Total flux subtracted in 200 components = -6.61578e-05 Jy ! Clean residual min=-0.002969 max=0.003477 Jy/beam ! Clean residual mean=0.000002 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.0973451 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0973451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093709Jy sigma=0.000633 ! Fit after self-cal, rms=0.093709Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.75596e-05 Jy ! Component: 100 - total flux cleaned = 7.90322e-06 Jy ! Component: 150 - total flux cleaned = -9.98485e-06 Jy ! Component: 200 - total flux cleaned = -1.01054e-05 Jy ! Total flux subtracted in 200 components = -1.01054e-05 Jy ! Clean residual min=-0.002954 max=0.003482 Jy/beam ! Clean residual mean=0.000002 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.097335 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.097335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093707Jy sigma=0.000633 ! Fit after self-cal, rms=0.093703Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=10.71 mas, bpa=13.41 degrees ! Estimated noise=1399.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 10.71 at 13.41 degrees (North through East) ! Clean map min=-0.002904 max=0.085811 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=9.658 mas, bpa=15.33 degrees ! Estimated noise=1882.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0681752 Jy ! Component: 100 - total flux cleaned = 0.0849616 Jy ! Component: 150 - total flux cleaned = 0.0917686 Jy ! Component: 200 - total flux cleaned = 0.0940427 Jy ! Total flux subtracted in 200 components = 0.0940427 Jy ! Clean residual min=-0.005504 max=0.005105 Jy/beam ! Clean residual mean=0.000002 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.0940427 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0940427 Jy ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=10.71 mas, bpa=13.41 degrees ! Estimated noise=1399.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164025 Jy ! Component: 100 - total flux cleaned = 0.00183329 Jy ! Component: 150 - total flux cleaned = 0.00188355 Jy ! Component: 200 - total flux cleaned = 0.0019821 Jy ! Total flux subtracted in 200 components = 0.0019821 Jy ! Clean residual min=-0.003112 max=0.002938 Jy/beam ! Clean residual mean=0.000002 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0960248 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.0960248 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.873 mas, bmaj=16.23 mas, bpa=0.4139 degrees ! Estimated noise=1685.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111089 Jy ! Component: 100 - total flux cleaned = 0.00104792 Jy ! Component: 150 - total flux cleaned = 0.00104862 Jy ! Component: 200 - total flux cleaned = 0.00107079 Jy ! Total flux subtracted in 200 components = 0.00107079 Jy ! Clean residual min=-0.002955 max=0.003551 Jy/beam ! Clean residual mean=0.000003 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0970956 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.54926e-06 Jy ! Component: 100 - total flux cleaned = -1.65302e-06 Jy ! Component: 150 - total flux cleaned = 1.56196e-05 Jy ! Component: 200 - total flux cleaned = 1.52601e-05 Jy ! Total flux subtracted in 200 components = 1.52601e-05 Jy ! Clean residual min=-0.002916 max=0.003522 Jy/beam ! Clean residual mean=0.000003 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.0971108 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.0971108 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=10.71 mas, bpa=13.41 degrees ! Estimated noise=1399.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.21737e-05 Jy ! Component: 100 - total flux cleaned = 7.12559e-05 Jy ! Component: 150 - total flux cleaned = 9.9755e-05 Jy ! Component: 200 - total flux cleaned = 0.00010028 Jy ! Total flux subtracted in 200 components = 0.00010028 Jy ! Clean residual min=-0.003019 max=0.002973 Jy/beam ! Clean residual mean=0.000001 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0972111 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.0972111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093719Jy sigma=0.000633 ! Fit after self-cal, rms=0.093724Jy sigma=0.000633 wmodel J1606-1929_S_2017_07_16_pus_map.mod ! Writing 54 model components to file: J1606-1929_S_2017_07_16_pus_map.mod wobs J1606-1929_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1606-1929_S_2017_07_16_pus_uvs.fits wwins J1606-1929_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1606-1929_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209739 Jy ! Component: 100 - total flux cleaned = 0.000462236 Jy ! Component: 150 - total flux cleaned = 0.00060136 Jy ! Component: 200 - total flux cleaned = 0.000689064 Jy ! Component: 250 - total flux cleaned = 0.000771331 Jy ! Component: 300 - total flux cleaned = 0.00077053 Jy ! Component: 350 - total flux cleaned = 0.000770836 Jy ! Component: 400 - total flux cleaned = 0.000772284 Jy ! Component: 450 - total flux cleaned = 0.00077265 Jy ! Component: 500 - total flux cleaned = 0.000773311 Jy ! Component: 550 - total flux cleaned = 0.000838194 Jy ! Component: 600 - total flux cleaned = 0.000776928 Jy ! Component: 650 - total flux cleaned = 0.000777148 Jy ! Component: 700 - total flux cleaned = 0.000660578 Jy ! Component: 750 - total flux cleaned = 0.000603313 Jy ! Component: 800 - total flux cleaned = 0.000464939 Jy ! Component: 850 - total flux cleaned = 0.00027708 Jy ! Component: 900 - total flux cleaned = 0.000120188 Jy ! Component: 950 - total flux cleaned = -3.32619e-05 Jy ! Component: 1000 - total flux cleaned = -0.000182166 Jy ! Component: 1050 - total flux cleaned = -0.000326968 Jy ! Component: 1100 - total flux cleaned = -0.000397664 Jy ! Component: 1150 - total flux cleaned = -0.000420673 Jy ! Component: 1200 - total flux cleaned = -0.000488875 Jy ! Component: 1250 - total flux cleaned = -0.000533713 Jy ! Component: 1300 - total flux cleaned = -0.000621448 Jy ! Component: 1350 - total flux cleaned = -0.0007071 Jy ! Component: 1400 - total flux cleaned = -0.000791064 Jy ! Component: 1450 - total flux cleaned = -0.000873571 Jy ! Component: 1500 - total flux cleaned = -0.00099491 Jy ! Component: 1550 - total flux cleaned = -0.00105476 Jy ! Component: 1600 - total flux cleaned = -0.00115249 Jy ! Component: 1650 - total flux cleaned = -0.00117167 Jy ! Component: 1700 - total flux cleaned = -0.00120928 Jy ! Component: 1750 - total flux cleaned = -0.0011721 Jy ! Component: 1800 - total flux cleaned = -0.00120905 Jy ! Component: 1850 - total flux cleaned = -0.00124522 Jy ! Component: 1900 - total flux cleaned = -0.00122731 Jy ! Component: 1950 - total flux cleaned = -0.0012269 Jy ! Component: 2000 - total flux cleaned = -0.00120958 Jy ! Component: 2050 - total flux cleaned = -0.00119236 Jy ! Component: 2100 - total flux cleaned = -0.00119245 Jy ! Component: 2150 - total flux cleaned = -0.00114269 Jy ! Component: 2200 - total flux cleaned = -0.0010939 Jy ! Component: 2250 - total flux cleaned = -0.00112619 Jy ! Component: 2300 - total flux cleaned = -0.00111025 Jy ! Component: 2350 - total flux cleaned = -0.00114178 Jy ! Component: 2400 - total flux cleaned = -0.0011572 Jy ! Component: 2450 - total flux cleaned = -0.00118806 Jy ! Component: 2500 - total flux cleaned = -0.0011729 Jy ! Component: 2550 - total flux cleaned = -0.00120323 Jy ! Component: 2600 - total flux cleaned = -0.00123313 Jy ! Component: 2650 - total flux cleaned = -0.00121844 Jy ! Component: 2700 - total flux cleaned = -0.0013357 Jy ! Component: 2750 - total flux cleaned = -0.00137898 Jy ! Component: 2800 - total flux cleaned = -0.00137909 Jy ! Component: 2850 - total flux cleaned = -0.00143623 Jy ! Component: 2900 - total flux cleaned = -0.0014642 Jy ! Component: 2950 - total flux cleaned = -0.00149209 Jy ! Component: 3000 - total flux cleaned = -0.00156122 Jy ! Component: 3050 - total flux cleaned = -0.00157479 Jy ! Component: 3100 - total flux cleaned = -0.00162906 Jy ! Component: 3150 - total flux cleaned = -0.00161566 Jy ! Component: 3200 - total flux cleaned = -0.0016555 Jy ! Component: 3250 - total flux cleaned = -0.00170835 Jy ! Component: 3300 - total flux cleaned = -0.00174769 Jy ! Component: 3350 - total flux cleaned = -0.00177374 Jy ! Component: 3400 - total flux cleaned = -0.00179953 Jy ! Component: 3450 - total flux cleaned = -0.00183795 Jy ! Component: 3500 - total flux cleaned = -0.00185066 Jy ! Component: 3550 - total flux cleaned = -0.00192636 Jy ! Component: 3600 - total flux cleaned = -0.00196378 Jy ! Component: 3650 - total flux cleaned = -0.00198847 Jy ! Component: 3700 - total flux cleaned = -0.00201311 Jy ! Component: 3750 - total flux cleaned = -0.00201313 Jy ! Component: 3800 - total flux cleaned = -0.00201319 Jy ! Component: 3850 - total flux cleaned = -0.00203722 Jy ! Component: 3900 - total flux cleaned = -0.00200107 Jy ! Component: 3950 - total flux cleaned = -0.00198901 Jy ! Component: 4000 - total flux cleaned = -0.00202455 Jy ! Component: 4050 - total flux cleaned = -0.00203622 Jy ! Total flux subtracted in 4096 components = -0.00202445 Jy ! Clean residual min=-0.000758 max=0.000815 Jy/beam ! Clean residual mean=-0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0951867 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 329 components and 0.0951866 Jy ![Exited script file: muppet] wmap "J1606-1929_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 10.71 at 13.41 degrees (North through East) ! Clean map min=-0.0017452 max=0.086378 Jy/beam ! Writing clean map to FITS file: J1606-1929_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0863779 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197848 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.687147 0.687147 1.37429 2.74859 5.49718 10.9944 21.9887 43.9774 87.9548 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.686 x 10.71 at 13.41 degrees (North through East) ! Clean map min=-0.0017452 max=0.086378 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1606-1929_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:13:02 2019