! Started logfile: J1606+5521_S_2017_09_26_pus_uvs.log on Sat May 11 13:03:00 2019 obs J1606+5521_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1606+5521_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.876177 visibilities/baseline/integration-bin. ! Found source: J1606+5521 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 37220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1606+5521_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1571 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964255Jy sigma=0.008917 ! Fit after self-cal, rms=0.941896Jy sigma=0.008719 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=4.367 mas, bpa=-35.34 degrees ! Estimated noise=1102.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0426078 Jy ! Component: 100 - total flux cleaned = 0.0554403 Jy ! Total flux subtracted in 100 components = 0.0554403 Jy ! Clean residual min=-0.006492 max=0.008521 Jy/beam ! Clean residual mean=-0.000075 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.0554403 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0554403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088133Jy sigma=0.000777 ! Fit after self-cal, rms=0.087841Jy sigma=0.000775 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.912 mas, bmaj=5.357 mas, bpa=-31.24 degrees ! Estimated noise=460.388 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119818 Jy ! Component: 100 - total flux cleaned = 0.0190259 Jy ! Component: 150 - total flux cleaned = 0.0233824 Jy ! Component: 200 - total flux cleaned = 0.0260871 Jy ! Total flux subtracted in 200 components = 0.0260871 Jy ! Clean residual min=-0.008465 max=0.013219 Jy/beam ! Clean residual mean=-0.000212 rms=0.002962 Jy/beam ! Combined flux in latest and established models = 0.0815273 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 49 components and 0.0815273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086156Jy sigma=0.000758 ! Fit after self-cal, rms=0.086028Jy sigma=0.000756 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 2.03 HN 1.03 KP 0.98 ! LA 1.07 MK 1.13 NL 1.02 OV 0.87 ! PT 0.71 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 2.22 HN 1.06 KP 0.97 ! LA 1.07 MK 1.09 NL 1.14 OV 0.88 ! PT 0.70 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 2.07 HN 1.00 KP 0.92 ! LA 1.11 MK 1.15 NL 1.03 OV 0.82 ! PT 0.70 ! ! ! Correcting IF 4. ! A total of 240 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.71 HN 1.06 KP 1.00* ! LA 0.81 MK 1.25 NL 1.00* OV 1.00* ! PT 0.73 ! ! ! Fit before self-cal, rms=0.086028Jy sigma=0.000756 ! Fit after self-cal, rms=0.103385Jy sigma=0.000733 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.092 mas, bmaj=5.528 mas, bpa=-25.03 degrees ! Estimated noise=470.544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-34.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950697 Jy ! Component: 100 - total flux cleaned = 0.0136026 Jy ! Component: 150 - total flux cleaned = 0.0147227 Jy ! Component: 200 - total flux cleaned = 0.0154267 Jy ! Total flux subtracted in 200 components = 0.0154267 Jy ! Clean residual min=-0.006141 max=0.010810 Jy/beam ! Clean residual mean=-0.000169 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.0969541 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 87 components and 0.0969541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102338Jy sigma=0.000723 ! Fit after self-cal, rms=0.103827Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103827Jy sigma=0.000712 ! Fit after self-cal, rms=0.110399Jy sigma=0.000705 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.024 mas, bmaj=5.559 mas, bpa=-33.57 degrees ! Estimated noise=466.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608945 Jy ! Component: 100 - total flux cleaned = 0.00795405 Jy ! Component: 150 - total flux cleaned = 0.00846876 Jy ! Component: 200 - total flux cleaned = 0.008838 Jy ! Total flux subtracted in 200 components = 0.008838 Jy ! Clean residual min=-0.004752 max=0.007188 Jy/beam ! Clean residual mean=-0.000189 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 0.105792 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 116 components and 0.105792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109855Jy sigma=0.000702 ! Fit after self-cal, rms=0.109979Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, -104). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712818 Jy ! Component: 100 - total flux cleaned = 0.0097645 Jy ! Component: 150 - total flux cleaned = 0.0101099 Jy ! Component: 200 - total flux cleaned = 0.0106087 Jy ! Total flux subtracted in 200 components = 0.0106087 Jy ! Clean residual min=-0.004927 max=0.005516 Jy/beam ! Clean residual mean=-0.000161 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.116401 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 154 components and 0.116401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109345Jy sigma=0.000693 ! Fit after self-cal, rms=0.109127Jy sigma=0.000691 ! Inverting map ! Added new window around map position (29, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607016 Jy ! Component: 100 - total flux cleaned = 0.00924694 Jy ! Component: 150 - total flux cleaned = 0.0106409 Jy ! Component: 200 - total flux cleaned = 0.0117216 Jy ! Total flux subtracted in 200 components = 0.0117216 Jy ! Clean residual min=-0.004991 max=0.005148 Jy/beam ! Clean residual mean=-0.000142 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.128122 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 210 components and 0.128122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108524Jy sigma=0.000687 ! Fit after self-cal, rms=0.108247Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108247Jy sigma=0.000686 ! Fit after self-cal, rms=0.096107Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.007 mas, bmaj=5.682 mas, bpa=-36.05 degrees ! Estimated noise=454.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422998 Jy ! Component: 100 - total flux cleaned = 0.00555789 Jy ! Component: 150 - total flux cleaned = 0.00597317 Jy ! Component: 200 - total flux cleaned = 0.00632026 Jy ! Total flux subtracted in 200 components = 0.00632026 Jy ! Clean residual min=-0.003815 max=0.004510 Jy/beam ! Clean residual mean=-0.000062 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.134443 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 244 components and 0.134443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095632Jy sigma=0.000678 ! Fit after self-cal, rms=0.095250Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500287 Jy ! Component: 100 - total flux cleaned = 0.00651754 Jy ! Component: 150 - total flux cleaned = 0.00762916 Jy ! Component: 200 - total flux cleaned = 0.00824827 Jy ! Total flux subtracted in 200 components = 0.00824827 Jy ! Clean residual min=-0.004016 max=0.003934 Jy/beam ! Clean residual mean=-0.000050 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.142691 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 281 components and 0.142691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094811Jy sigma=0.000673 ! Fit after self-cal, rms=0.094627Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094627Jy sigma=0.000672 ! Fit after self-cal, rms=0.089409Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.802 mas, bmaj=9.715 mas, bpa=49.69 degrees ! Estimated noise=500.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360043 Jy ! Component: 100 - total flux cleaned = 0.00471503 Jy ! Component: 150 - total flux cleaned = 0.0054114 Jy ! Component: 200 - total flux cleaned = 0.00583073 Jy ! Total flux subtracted in 200 components = 0.00583073 Jy ! Clean residual min=-0.004564 max=0.004371 Jy/beam ! Clean residual mean=-0.000041 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.148522 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 310 components and 0.148522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089121Jy sigma=0.000668 ! Fit after self-cal, rms=0.088854Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110699 Jy ! Component: 100 - total flux cleaned = 0.00100903 Jy ! Component: 150 - total flux cleaned = 0.00108344 Jy ! Component: 200 - total flux cleaned = 0.001279 Jy ! Total flux subtracted in 200 components = 0.001279 Jy ! Clean residual min=-0.004608 max=0.004208 Jy/beam ! Clean residual mean=-0.000037 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.149801 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 325 components and 0.149801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088671Jy sigma=0.000666 ! Fit after self-cal, rms=0.088589Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.056 mas, bmaj=5.696 mas, bpa=-34.25 degrees ! Estimated noise=448.829 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.056 x 5.696 at -34.25 degrees (North through East) ! Clean map min=-0.0087502 max=0.049893 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=4.684 mas, bpa=-38.15 degrees ! Estimated noise=1108.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405372 Jy ! Component: 100 - total flux cleaned = 0.0606686 Jy ! Component: 150 - total flux cleaned = 0.0736646 Jy ! Component: 200 - total flux cleaned = 0.0825441 Jy ! Total flux subtracted in 200 components = 0.0825441 Jy ! Clean residual min=-0.006541 max=0.007302 Jy/beam ! Clean residual mean=-0.000048 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.0825441 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.0825441 Jy ! Inverting map and beam ! Estimated beam: bmin=5.056 mas, bmaj=5.696 mas, bpa=-34.25 degrees ! Estimated noise=448.829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131532 Jy ! Component: 100 - total flux cleaned = 0.0226617 Jy ! Component: 150 - total flux cleaned = 0.0288161 Jy ! Component: 200 - total flux cleaned = 0.0334916 Jy ! Total flux subtracted in 200 components = 0.0334916 Jy ! Clean residual min=-0.005901 max=0.005394 Jy/beam ! Clean residual mean=-0.000117 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.116036 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 98 components and 0.116036 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.802 mas, bmaj=9.715 mas, bpa=49.69 degrees ! Estimated noise=500.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830199 Jy ! Component: 100 - total flux cleaned = 0.0133939 Jy ! Component: 150 - total flux cleaned = 0.0168718 Jy ! Component: 200 - total flux cleaned = 0.0196051 Jy ! Total flux subtracted in 200 components = 0.0196051 Jy ! Clean residual min=-0.005918 max=0.004690 Jy/beam ! Clean residual mean=-0.000123 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.135641 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248424 Jy ! Component: 100 - total flux cleaned = 0.00450934 Jy ! Component: 150 - total flux cleaned = 0.00604916 Jy ! Component: 200 - total flux cleaned = 0.00730958 Jy ! Total flux subtracted in 200 components = 0.00730958 Jy ! Clean residual min=-0.005022 max=0.003667 Jy/beam ! Clean residual mean=-0.000081 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.14295 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 184 components and 0.14295 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.056 mas, bmaj=5.696 mas, bpa=-34.25 degrees ! Estimated noise=448.829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146679 Jy ! Component: 100 - total flux cleaned = 0.00221778 Jy ! Component: 150 - total flux cleaned = 0.00288038 Jy ! Component: 200 - total flux cleaned = 0.00361503 Jy ! Total flux subtracted in 200 components = 0.00361503 Jy ! Clean residual min=-0.003560 max=0.003374 Jy/beam ! Clean residual mean=-0.000036 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.146565 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 211 components and 0.146565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088513Jy sigma=0.000666 ! Fit after self-cal, rms=0.088370Jy sigma=0.000665 wmodel J1606+5521_S_2017_09_26_pus_map.mod ! Writing 211 model components to file: J1606+5521_S_2017_09_26_pus_map.mod wobs J1606+5521_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1606+5521_S_2017_09_26_pus_uvs.fits wwins J1606+5521_S_2017_09_26_pus_map.win ! wwins: Wrote 5 windows to J1606+5521_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552581 Jy ! Component: 100 - total flux cleaned = 0.000606568 Jy ! Component: 150 - total flux cleaned = 0.000606604 Jy ! Component: 200 - total flux cleaned = 0.00060473 Jy ! Component: 250 - total flux cleaned = 0.000651252 Jy ! Component: 300 - total flux cleaned = 0.000740743 Jy ! Component: 350 - total flux cleaned = 0.000740904 Jy ! Component: 400 - total flux cleaned = 0.000863886 Jy ! Component: 450 - total flux cleaned = 0.000822048 Jy ! Component: 500 - total flux cleaned = 0.000783128 Jy ! Component: 550 - total flux cleaned = 0.000894751 Jy ! Component: 600 - total flux cleaned = 0.000931187 Jy ! Component: 650 - total flux cleaned = 0.00107177 Jy ! Component: 700 - total flux cleaned = 0.00120793 Jy ! Component: 750 - total flux cleaned = 0.00134052 Jy ! Component: 800 - total flux cleaned = 0.00134072 Jy ! Component: 850 - total flux cleaned = 0.00140392 Jy ! Component: 900 - total flux cleaned = 0.00146474 Jy ! Component: 950 - total flux cleaned = 0.00155443 Jy ! Component: 1000 - total flux cleaned = 0.00167127 Jy ! Component: 1050 - total flux cleaned = 0.00178491 Jy ! Component: 1100 - total flux cleaned = 0.00186803 Jy ! Component: 1150 - total flux cleaned = 0.00194955 Jy ! Component: 1200 - total flux cleaned = 0.00202973 Jy ! Component: 1250 - total flux cleaned = 0.00213389 Jy ! Component: 1300 - total flux cleaned = 0.0022361 Jy ! Component: 1350 - total flux cleaned = 0.00238611 Jy ! Component: 1400 - total flux cleaned = 0.00245895 Jy ! Component: 1450 - total flux cleaned = 0.00262695 Jy ! Component: 1500 - total flux cleaned = 0.00279163 Jy ! Component: 1550 - total flux cleaned = 0.0029764 Jy ! Component: 1600 - total flux cleaned = 0.00311192 Jy ! Component: 1650 - total flux cleaned = 0.00326727 Jy ! Component: 1700 - total flux cleaned = 0.00337626 Jy ! Component: 1750 - total flux cleaned = 0.00350471 Jy ! Component: 1800 - total flux cleaned = 0.00361004 Jy ! Component: 1850 - total flux cleaned = 0.0036308 Jy ! Component: 1900 - total flux cleaned = 0.00369211 Jy ! Component: 1950 - total flux cleaned = 0.00373205 Jy ! Component: 2000 - total flux cleaned = 0.00373255 Jy ! Component: 2050 - total flux cleaned = 0.00383004 Jy ! Component: 2100 - total flux cleaned = 0.0038299 Jy ! Component: 2150 - total flux cleaned = 0.00384913 Jy ! Component: 2200 - total flux cleaned = 0.00384932 Jy ! Component: 2250 - total flux cleaned = 0.00384941 Jy ! Component: 2300 - total flux cleaned = 0.0038676 Jy ! Component: 2350 - total flux cleaned = 0.00388539 Jy ! Component: 2400 - total flux cleaned = 0.00388515 Jy ! Component: 2450 - total flux cleaned = 0.00393706 Jy ! Component: 2500 - total flux cleaned = 0.00392002 Jy ! Component: 2550 - total flux cleaned = 0.00393729 Jy ! Component: 2600 - total flux cleaned = 0.00397077 Jy ! Component: 2650 - total flux cleaned = 0.0040037 Jy ! Component: 2700 - total flux cleaned = 0.00398722 Jy ! Component: 2750 - total flux cleaned = 0.00398717 Jy ! Component: 2800 - total flux cleaned = 0.00403527 Jy ! Component: 2850 - total flux cleaned = 0.00403539 Jy ! Component: 2900 - total flux cleaned = 0.00409771 Jy ! Component: 2950 - total flux cleaned = 0.00408224 Jy ! Component: 3000 - total flux cleaned = 0.00409723 Jy ! Component: 3050 - total flux cleaned = 0.00408204 Jy ! Component: 3100 - total flux cleaned = 0.00402236 Jy ! Component: 3150 - total flux cleaned = 0.00400774 Jy ! Component: 3200 - total flux cleaned = 0.00399321 Jy ! Component: 3250 - total flux cleaned = 0.00402209 Jy ! Component: 3300 - total flux cleaned = 0.00399326 Jy ! Component: 3350 - total flux cleaned = 0.00397906 Jy ! Component: 3400 - total flux cleaned = 0.00396508 Jy ! Component: 3450 - total flux cleaned = 0.00393744 Jy ! Component: 3500 - total flux cleaned = 0.00391001 Jy ! Component: 3550 - total flux cleaned = 0.00388283 Jy ! Component: 3600 - total flux cleaned = 0.00382878 Jy ! Component: 3650 - total flux cleaned = 0.00377527 Jy ! Component: 3700 - total flux cleaned = 0.00374873 Jy ! Component: 3750 - total flux cleaned = 0.00369622 Jy ! Component: 3800 - total flux cleaned = 0.00361835 Jy ! Component: 3850 - total flux cleaned = 0.00354112 Jy ! Component: 3900 - total flux cleaned = 0.00350302 Jy ! Component: 3950 - total flux cleaned = 0.0034778 Jy ! Component: 4000 - total flux cleaned = 0.00339012 Jy ! Component: 4050 - total flux cleaned = 0.00330311 Jy ! Total flux subtracted in 4096 components = 0.0032908 Jy ! Clean residual min=-0.000828 max=0.000780 Jy/beam ! Clean residual mean=-0.000006 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.149856 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 550 components and 0.149856 Jy ![Exited script file: muppet] wmap "J1606+5521_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.056 x 5.696 at -34.25 degrees (North through East) ! Clean map min=-0.0071341 max=0.049763 Jy/beam ! Writing clean map to FITS file: J1606+5521_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0497628 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241991 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45887 1.45887 2.91773 5.83547 11.6709 23.3419 46.6837 93.3675 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.056 x 5.696 at -34.25 degrees (North through East) ! Clean map min=-0.0071341 max=0.049763 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1606+5521_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:03:07 2019