! Started logfile: J1606+5405_S_2017_05_27_pus_uvs.log on Fri May 3 11:10:11 2019 obs J1606+5405_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1606+5405_S_2017_05_27_pus_uva.fits ! AN table 1: 230 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882512 visibilities/baseline/integration-bin. ! Found source: J1606+5405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 36536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1606+5405_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1441 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968269Jy sigma=0.008870 ! Fit after self-cal, rms=0.946416Jy sigma=0.008676 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=4.244 mas, bpa=5.114 degrees ! Estimated noise=800.328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398282 Jy ! Component: 100 - total flux cleaned = 0.0542727 Jy ! Total flux subtracted in 100 components = 0.0542727 Jy ! Clean residual min=-0.003614 max=0.010390 Jy/beam ! Clean residual mean=0.000010 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.0542727 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0542727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081661Jy sigma=0.000703 ! Fit after self-cal, rms=0.081289Jy sigma=0.000699 ! Inverting map ! Added new window around map position (5, -2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103653 Jy ! Component: 100 - total flux cleaned = 0.0165807 Jy ! Total flux subtracted in 100 components = 0.0165807 Jy ! Clean residual min=-0.003079 max=0.008955 Jy/beam ! Clean residual mean=0.000008 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0708534 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.0708534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079412Jy sigma=0.000682 ! Fit after self-cal, rms=0.079277Jy sigma=0.000680 ! Inverting map ! Added new window around map position (-7, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831416 Jy ! Component: 100 - total flux cleaned = 0.0134124 Jy ! Total flux subtracted in 100 components = 0.0134124 Jy ! Clean residual min=-0.002694 max=0.003337 Jy/beam ! Clean residual mean=0.000006 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0842658 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.0842658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078095Jy sigma=0.000669 ! Fit after self-cal, rms=0.077973Jy sigma=0.000668 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499683 Jy ! Component: 100 - total flux cleaned = 0.00817436 Jy ! Total flux subtracted in 100 components = 0.00817436 Jy ! Clean residual min=-0.002494 max=0.003095 Jy/beam ! Clean residual mean=0.000006 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0924402 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.0924402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077521Jy sigma=0.000664 ! Fit after self-cal, rms=0.077471Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=5.196 mas, bpa=3.225 degrees ! Estimated noise=465.651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439132 Jy ! Component: 100 - total flux cleaned = 0.00702015 Jy ! Component: 150 - total flux cleaned = 0.00878496 Jy ! Component: 200 - total flux cleaned = 0.0100174 Jy ! Total flux subtracted in 200 components = 0.0100174 Jy ! Clean residual min=-0.001782 max=0.001647 Jy/beam ! Clean residual mean=-0.000011 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.102458 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 72 components and 0.102458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077175Jy sigma=0.000661 ! Fit after self-cal, rms=0.077130Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 1.00 KP 1.01 ! LA 0.96 MK 1.04 NL 0.89 OV 1.02 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 1.27 KP 0.93 ! LA 0.95 MK 0.97 NL 1.02 OV 1.17 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.06 KP 1.01 ! LA 0.99 MK 1.01 NL 1.02 OV 0.96 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 4. ! A total of 261 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.82 KP 1.00* ! LA 1.04 MK 0.74 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.077130Jy sigma=0.000660 ! Fit after self-cal, rms=0.075530Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=5.188 mas, bpa=4.418 degrees ! Estimated noise=463.748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000902507 Jy ! Component: 100 - total flux cleaned = 0.00105886 Jy ! Component: 150 - total flux cleaned = 0.00115248 Jy ! Component: 200 - total flux cleaned = 0.00117704 Jy ! Total flux subtracted in 200 components = 0.00117704 Jy ! Clean residual min=-0.001494 max=0.001487 Jy/beam ! Clean residual mean=-0.000013 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.103635 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.103635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075492Jy sigma=0.000659 ! Fit after self-cal, rms=0.075463Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075463Jy sigma=0.000658 ! Fit after self-cal, rms=0.076235Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=5.198 mas, bpa=6.267 degrees ! Estimated noise=460.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537576 Jy ! Component: 100 - total flux cleaned = 0.000572743 Jy ! Component: 150 - total flux cleaned = 0.000549338 Jy ! Component: 200 - total flux cleaned = 0.000507051 Jy ! Total flux subtracted in 200 components = 0.000507051 Jy ! Clean residual min=-0.001363 max=0.001284 Jy/beam ! Clean residual mean=-0.000004 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.104142 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.104142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076216Jy sigma=0.000656 ! Fit after self-cal, rms=0.076290Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113925 Jy ! Component: 100 - total flux cleaned = 8.97003e-05 Jy ! Component: 150 - total flux cleaned = 6.96726e-05 Jy ! Component: 200 - total flux cleaned = 1.66276e-05 Jy ! Total flux subtracted in 200 components = 1.66276e-05 Jy ! Clean residual min=-0.001336 max=0.001265 Jy/beam ! Clean residual mean=-0.000004 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.104158 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 106 components and 0.104158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076276Jy sigma=0.000655 ! Fit after self-cal, rms=0.076276Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076276Jy sigma=0.000655 ! Fit after self-cal, rms=0.077259Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.096 mas, bmaj=5.213 mas, bpa=6.727 degrees ! Estimated noise=456.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412773 Jy ! Component: 100 - total flux cleaned = 0.000367361 Jy ! Component: 150 - total flux cleaned = 0.00034723 Jy ! Component: 200 - total flux cleaned = 0.000296694 Jy ! Total flux subtracted in 200 components = 0.000296694 Jy ! Clean residual min=-0.001235 max=0.001240 Jy/beam ! Clean residual mean=-0.000003 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.104455 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 109 components and 0.104455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077246Jy sigma=0.000655 ! Fit after self-cal, rms=0.077278Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125066 Jy ! Component: 100 - total flux cleaned = 8.47445e-05 Jy ! Component: 150 - total flux cleaned = 1.70831e-05 Jy ! Component: 200 - total flux cleaned = 2.1868e-06 Jy ! Total flux subtracted in 200 components = 2.1868e-06 Jy ! Clean residual min=-0.001235 max=0.001256 Jy/beam ! Clean residual mean=-0.000003 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.104457 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.104457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077269Jy sigma=0.000655 ! Fit after self-cal, rms=0.077270Jy sigma=0.000655 ! Inverting map ! Added new window around map position (-93, 47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105445 Jy ! Component: 100 - total flux cleaned = 0.00101405 Jy ! Component: 150 - total flux cleaned = 0.000898898 Jy ! Component: 200 - total flux cleaned = 0.000813217 Jy ! Total flux subtracted in 200 components = 0.000813217 Jy ! Clean residual min=-0.001242 max=0.001187 Jy/beam ! Clean residual mean=-0.000004 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.10527 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 124 components and 0.10527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077250Jy sigma=0.000655 ! Fit after self-cal, rms=0.077248Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077248Jy sigma=0.000655 ! Fit after self-cal, rms=0.077420Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.935 mas, bmaj=8.712 mas, bpa=11.43 degrees ! Estimated noise=554.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.9821e-05 Jy ! Component: 100 - total flux cleaned = 4.16798e-05 Jy ! Component: 150 - total flux cleaned = 7.19673e-05 Jy ! Component: 200 - total flux cleaned = 7.1641e-05 Jy ! Total flux subtracted in 200 components = 7.1641e-05 Jy ! Clean residual min=-0.001162 max=0.001461 Jy/beam ! Clean residual mean=-0.000007 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.105342 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 132 components and 0.105342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077413Jy sigma=0.000655 ! Fit after self-cal, rms=0.077423Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (113, 52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000994601 Jy ! Component: 100 - total flux cleaned = 0.00114241 Jy ! Component: 150 - total flux cleaned = 0.00120193 Jy ! Component: 200 - total flux cleaned = 0.00125054 Jy ! Total flux subtracted in 200 components = 0.00125054 Jy ! Clean residual min=-0.000971 max=0.001091 Jy/beam ! Clean residual mean=-0.000008 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.106593 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 177 components and 0.106592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077404Jy sigma=0.000654 ! Fit after self-cal, rms=0.077400Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.093 mas, bmaj=5.22 mas, bpa=7.286 degrees ! Estimated noise=453.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.093 x 5.22 at 7.286 degrees (North through East) ! Clean map min=-0.0010996 max=0.045634 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=4.289 mas, bpa=9.725 degrees ! Estimated noise=768.455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383619 Jy ! Component: 100 - total flux cleaned = 0.0561761 Jy ! Component: 150 - total flux cleaned = 0.0685498 Jy ! Component: 200 - total flux cleaned = 0.0775364 Jy ! Total flux subtracted in 200 components = 0.0775364 Jy ! Clean residual min=-0.002995 max=0.005132 Jy/beam ! Clean residual mean=0.000011 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.0775363 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0775363 Jy ! Inverting map and beam ! Estimated beam: bmin=4.093 mas, bmaj=5.22 mas, bpa=7.286 degrees ! Estimated noise=453.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00923894 Jy ! Component: 100 - total flux cleaned = 0.0152189 Jy ! Component: 150 - total flux cleaned = 0.0192927 Jy ! Component: 200 - total flux cleaned = 0.0221243 Jy ! Total flux subtracted in 200 components = 0.0221243 Jy ! Clean residual min=-0.001328 max=0.001724 Jy/beam ! Clean residual mean=-0.000006 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0996606 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 47 components and 0.0996606 Jy ! Inverting map ! Added new window around map position (-11.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213935 Jy ! Component: 100 - total flux cleaned = 0.00360405 Jy ! Component: 150 - total flux cleaned = 0.00476992 Jy ! Component: 200 - total flux cleaned = 0.00554977 Jy ! Total flux subtracted in 200 components = 0.00554977 Jy ! Clean residual min=-0.001240 max=0.001139 Jy/beam ! Clean residual mean=-0.000005 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.10521 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 79 components and 0.10521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.935 mas, bmaj=8.712 mas, bpa=11.43 degrees ! Estimated noise=554.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120504 Jy ! Component: 100 - total flux cleaned = 0.00164942 Jy ! Component: 150 - total flux cleaned = 0.00198475 Jy ! Component: 200 - total flux cleaned = 0.00228055 Jy ! Total flux subtracted in 200 components = 0.00228055 Jy ! Clean residual min=-0.001137 max=0.001146 Jy/beam ! Clean residual mean=-0.000008 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.107491 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236786 Jy ! Component: 100 - total flux cleaned = 0.000370685 Jy ! Component: 150 - total flux cleaned = 0.000469611 Jy ! Component: 200 - total flux cleaned = 0.000539409 Jy ! Total flux subtracted in 200 components = 0.000539409 Jy ! Clean residual min=-0.001036 max=0.001096 Jy/beam ! Clean residual mean=-0.000007 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.10803 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 140 components and 0.10803 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.093 mas, bmaj=5.22 mas, bpa=7.286 degrees ! Estimated noise=453.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.07248e-05 Jy ! Component: 100 - total flux cleaned = 3.03207e-05 Jy ! Component: 150 - total flux cleaned = 0.000122529 Jy ! Component: 200 - total flux cleaned = 0.000180259 Jy ! Total flux subtracted in 200 components = 0.000180259 Jy ! Clean residual min=-0.001144 max=0.001098 Jy/beam ! Clean residual mean=-0.000003 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.108211 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 169 components and 0.108211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077393Jy sigma=0.000654 ! Fit after self-cal, rms=0.077373Jy sigma=0.000654 wmodel J1606+5405_S_2017_05_27_pus_map.mod ! Writing 169 model components to file: J1606+5405_S_2017_05_27_pus_map.mod wobs J1606+5405_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1606+5405_S_2017_05_27_pus_uvs.fits wwins J1606+5405_S_2017_05_27_pus_map.win ! wwins: Wrote 6 windows to J1606+5405_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.29994e-05 Jy ! Component: 100 - total flux cleaned = 3.38337e-05 Jy ! Component: 150 - total flux cleaned = 0.000106124 Jy ! Component: 200 - total flux cleaned = 0.000245684 Jy ! Component: 250 - total flux cleaned = 0.000380681 Jy ! Component: 300 - total flux cleaned = 0.000479625 Jy ! Component: 350 - total flux cleaned = 0.000592783 Jy ! Component: 400 - total flux cleaned = 0.000687735 Jy ! Component: 450 - total flux cleaned = 0.000796407 Jy ! Component: 500 - total flux cleaned = 0.000934158 Jy ! Component: 550 - total flux cleaned = 0.00105458 Jy ! Component: 600 - total flux cleaned = 0.00115844 Jy ! Component: 650 - total flux cleaned = 0.00123193 Jy ! Component: 700 - total flux cleaned = 0.00131876 Jy ! Component: 750 - total flux cleaned = 0.00141886 Jy ! Component: 800 - total flux cleaned = 0.00147515 Jy ! Component: 850 - total flux cleaned = 0.00151714 Jy ! Component: 900 - total flux cleaned = 0.00155838 Jy ! Component: 950 - total flux cleaned = 0.00159922 Jy ! Component: 1000 - total flux cleaned = 0.00166648 Jy ! Component: 1050 - total flux cleaned = 0.00167964 Jy ! Component: 1100 - total flux cleaned = 0.00170594 Jy ! Component: 1150 - total flux cleaned = 0.00177106 Jy ! Component: 1200 - total flux cleaned = 0.00183576 Jy ! Component: 1250 - total flux cleaned = 0.00187413 Jy ! Component: 1300 - total flux cleaned = 0.0018868 Jy ! Component: 1350 - total flux cleaned = 0.00194956 Jy ! Component: 1400 - total flux cleaned = 0.00197435 Jy ! Component: 1450 - total flux cleaned = 0.00202378 Jy ! Component: 1500 - total flux cleaned = 0.00204817 Jy ! Component: 1550 - total flux cleaned = 0.00209669 Jy ! Component: 1600 - total flux cleaned = 0.00212064 Jy ! Component: 1650 - total flux cleaned = 0.00216831 Jy ! Component: 1700 - total flux cleaned = 0.002192 Jy ! Component: 1750 - total flux cleaned = 0.00222711 Jy ! Component: 1800 - total flux cleaned = 0.00223868 Jy ! Component: 1850 - total flux cleaned = 0.00231925 Jy ! Component: 1900 - total flux cleaned = 0.00231924 Jy ! Component: 1950 - total flux cleaned = 0.00235317 Jy ! Component: 2000 - total flux cleaned = 0.0024319 Jy ! Component: 2050 - total flux cleaned = 0.00245417 Jy ! Component: 2100 - total flux cleaned = 0.00250954 Jy ! Component: 2150 - total flux cleaned = 0.00254243 Jy ! Component: 2200 - total flux cleaned = 0.00258592 Jy ! Component: 2250 - total flux cleaned = 0.00266177 Jy ! Component: 2300 - total flux cleaned = 0.00266175 Jy ! Component: 2350 - total flux cleaned = 0.00269366 Jy ! Component: 2400 - total flux cleaned = 0.00274663 Jy ! Component: 2450 - total flux cleaned = 0.00277812 Jy ! Component: 2500 - total flux cleaned = 0.00280944 Jy ! Component: 2550 - total flux cleaned = 0.00289237 Jy ! Component: 2600 - total flux cleaned = 0.00288219 Jy ! Component: 2650 - total flux cleaned = 0.0029641 Jy ! Component: 2700 - total flux cleaned = 0.00299451 Jy ! Component: 2750 - total flux cleaned = 0.00304503 Jy ! Component: 2800 - total flux cleaned = 0.0030451 Jy ! Component: 2850 - total flux cleaned = 0.00310499 Jy ! Component: 2900 - total flux cleaned = 0.00314462 Jy ! Component: 2950 - total flux cleaned = 0.00321352 Jy ! Component: 3000 - total flux cleaned = 0.00324285 Jy ! Component: 3050 - total flux cleaned = 0.00324286 Jy ! Component: 3100 - total flux cleaned = 0.00327185 Jy ! Component: 3150 - total flux cleaned = 0.00333925 Jy ! Component: 3200 - total flux cleaned = 0.00339646 Jy ! Component: 3250 - total flux cleaned = 0.00341542 Jy ! Component: 3300 - total flux cleaned = 0.00347208 Jy ! Component: 3350 - total flux cleaned = 0.00350021 Jy ! Component: 3400 - total flux cleaned = 0.00352822 Jy ! Component: 3450 - total flux cleaned = 0.00356537 Jy ! Component: 3500 - total flux cleaned = 0.00360231 Jy ! Component: 3550 - total flux cleaned = 0.0036207 Jy ! Component: 3600 - total flux cleaned = 0.00367561 Jy ! Component: 3650 - total flux cleaned = 0.00370294 Jy ! Component: 3700 - total flux cleaned = 0.00373007 Jy ! Component: 3750 - total flux cleaned = 0.00372108 Jy ! Component: 3800 - total flux cleaned = 0.00379261 Jy ! Component: 3850 - total flux cleaned = 0.00381041 Jy ! Component: 3900 - total flux cleaned = 0.00382811 Jy ! Component: 3950 - total flux cleaned = 0.00381053 Jy ! Component: 4000 - total flux cleaned = 0.00388942 Jy ! Component: 4050 - total flux cleaned = 0.00392432 Jy ! Total flux subtracted in 4096 components = 0.00391571 Jy ! Clean residual min=-0.000572 max=0.000454 Jy/beam ! Clean residual mean=-0.000001 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.112126 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 473 components and 0.112126 Jy ![Exited script file: muppet] wmap "J1606+5405_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.093 x 5.22 at 7.286 degrees (North through East) ! Clean map min=-0.00085321 max=0.04509 Jy/beam ! Writing clean map to FITS file: J1606+5405_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0450895 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160261 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06628 1.06628 2.13257 4.26514 8.53028 17.0606 34.1211 68.2422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.093 x 5.22 at 7.286 degrees (North through East) ! Clean map min=-0.00085321 max=0.04509 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1606+5405_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:10:17 2019