! Started logfile: J1603-2933_S_2017_02_19_pus_uvs.log on Sat May 4 18:54:00 2019 obs J1603-2933_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1603-2933_S_2017_02_19_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.67798 visibilities/baseline/integration-bin. ! Found source: J1603-2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 6712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1603-2933_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981294Jy sigma=0.006291 ! Fit after self-cal, rms=0.925450Jy sigma=0.005978 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=6.165 mas, bpa=-2.274 degrees ! Estimated noise=1888.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589034 Jy ! Component: 100 - total flux cleaned = 0.073439 Jy ! Total flux subtracted in 100 components = 0.073439 Jy ! Clean residual min=-0.005225 max=0.006552 Jy/beam ! Clean residual mean=0.000010 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.073439 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.073439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110483Jy sigma=0.000661 ! Fit after self-cal, rms=0.109800Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.235 mas, bpa=-1.25 degrees ! Estimated noise=1501.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010857 Jy ! Component: 100 - total flux cleaned = 0.01644 Jy ! Component: 150 - total flux cleaned = 0.0195799 Jy ! Component: 200 - total flux cleaned = 0.0213897 Jy ! Total flux subtracted in 200 components = 0.0213897 Jy ! Clean residual min=-0.004735 max=0.004526 Jy/beam ! Clean residual mean=0.000005 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.0948287 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 0.0948287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108675Jy sigma=0.000651 ! Fit after self-cal, rms=0.108562Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.11 KP 1.05 ! LA 0.98 MK 1.05 NL 0.98 OV 0.99 ! PT 1.00* SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.16 KP 0.98 ! LA 1.01 MK 1.04 NL 1.09 OV 1.14 ! PT 1.00* SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 1.06 KP 0.85 ! LA 0.78 MK 1.01 NL 1.15 OV 1.00 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 1.00* KP 1.00* ! LA 0.76 MK 0.95 NL 1.00* OV 0.92 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.108562Jy sigma=0.000650 ! Fit after self-cal, rms=0.107848Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=7.262 mas, bpa=-1.132 degrees ! Estimated noise=1492.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544146 Jy ! Component: 100 - total flux cleaned = 0.000518055 Jy ! Component: 150 - total flux cleaned = 0.000470382 Jy ! Component: 200 - total flux cleaned = 0.000449738 Jy ! Total flux subtracted in 200 components = 0.000449738 Jy ! Clean residual min=-0.004082 max=0.004110 Jy/beam ! Clean residual mean=0.000005 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.0952784 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.0952784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107835Jy sigma=0.000647 ! Fit after self-cal, rms=0.107883Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107883Jy sigma=0.000647 ! Fit after self-cal, rms=0.109328Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=7.283 mas, bpa=-1.108 degrees ! Estimated noise=1496.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457596 Jy ! Component: 100 - total flux cleaned = 0.000486373 Jy ! Component: 150 - total flux cleaned = 0.000440698 Jy ! Component: 200 - total flux cleaned = 0.00042169 Jy ! Total flux subtracted in 200 components = 0.00042169 Jy ! Clean residual min=-0.004001 max=0.004230 Jy/beam ! Clean residual mean=0.000009 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0957001 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.0957001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109316Jy sigma=0.000646 ! Fit after self-cal, rms=0.109355Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, 70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313721 Jy ! Component: 100 - total flux cleaned = 0.00330918 Jy ! Component: 150 - total flux cleaned = 0.00347825 Jy ! Component: 200 - total flux cleaned = 0.0035708 Jy ! Total flux subtracted in 200 components = 0.0035708 Jy ! Clean residual min=-0.003587 max=0.003538 Jy/beam ! Clean residual mean=0.000009 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.0992709 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.0992709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109230Jy sigma=0.000645 ! Fit after self-cal, rms=0.109194Jy sigma=0.000644 ! Inverting map ! Added new window around map position (114.5, 89.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342158 Jy ! Component: 100 - total flux cleaned = 0.00432156 Jy ! Component: 150 - total flux cleaned = 0.00438265 Jy ! Component: 200 - total flux cleaned = 0.00438318 Jy ! Total flux subtracted in 200 components = 0.00438318 Jy ! Clean residual min=-0.003686 max=0.003106 Jy/beam ! Clean residual mean=0.000005 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.103654 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.103654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109064Jy sigma=0.000644 ! Fit after self-cal, rms=0.109035Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109035Jy sigma=0.000643 ! Fit after self-cal, rms=0.108205Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=7.234 mas, bpa=-1.057 degrees ! Estimated noise=1474.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219939 Jy ! Component: 100 - total flux cleaned = 0.00238436 Jy ! Component: 150 - total flux cleaned = 0.00233476 Jy ! Component: 200 - total flux cleaned = 0.00224574 Jy ! Total flux subtracted in 200 components = 0.00224574 Jy ! Clean residual min=-0.003617 max=0.003239 Jy/beam ! Clean residual mean=0.000008 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.1059 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.1059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108140Jy sigma=0.000643 ! Fit after self-cal, rms=0.108162Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771585 Jy ! Component: 100 - total flux cleaned = 0.00077181 Jy ! Component: 150 - total flux cleaned = 0.000730392 Jy ! Component: 200 - total flux cleaned = 0.000769792 Jy ! Total flux subtracted in 200 components = 0.000769792 Jy ! Clean residual min=-0.003501 max=0.003247 Jy/beam ! Clean residual mean=0.000007 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.10667 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.10667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108127Jy sigma=0.000642 ! Fit after self-cal, rms=0.108125Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108125Jy sigma=0.000642 ! Fit after self-cal, rms=0.108076Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=18.26 mas, bpa=6.49 degrees ! Estimated noise=1991.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104607 Jy ! Component: 100 - total flux cleaned = 0.00128711 Jy ! Component: 150 - total flux cleaned = 0.00149122 Jy ! Component: 200 - total flux cleaned = 0.00161319 Jy ! Total flux subtracted in 200 components = 0.00161319 Jy ! Clean residual min=-0.004032 max=0.004208 Jy/beam ! Clean residual mean=0.000016 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.108283 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.108283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108065Jy sigma=0.000642 ! Fit after self-cal, rms=0.108074Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.91202e-05 Jy ! Component: 100 - total flux cleaned = 0.000170669 Jy ! Component: 150 - total flux cleaned = 0.000170567 Jy ! Component: 200 - total flux cleaned = 0.000170784 Jy ! Total flux subtracted in 200 components = 0.000170784 Jy ! Clean residual min=-0.003961 max=0.004170 Jy/beam ! Clean residual mean=0.000015 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.108454 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 104 components and 0.108454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108068Jy sigma=0.000642 ! Fit after self-cal, rms=0.108065Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=7.206 mas, bpa=-0.9819 degrees ! Estimated noise=1469.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.838 x 7.206 at -0.9819 degrees (North through East) ! Clean map min=-0.0034597 max=0.076325 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.35 mas, bmaj=6.138 mas, bpa=-1.762 degrees ! Estimated noise=1839.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575987 Jy ! Component: 100 - total flux cleaned = 0.0728175 Jy ! Component: 150 - total flux cleaned = 0.0814477 Jy ! Component: 200 - total flux cleaned = 0.0880543 Jy ! Total flux subtracted in 200 components = 0.0880543 Jy ! Clean residual min=-0.005194 max=0.005107 Jy/beam ! Clean residual mean=0.000010 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.0880543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0880543 Jy ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=7.206 mas, bpa=-0.9819 degrees ! Estimated noise=1469.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704255 Jy ! Component: 100 - total flux cleaned = 0.0113555 Jy ! Component: 150 - total flux cleaned = 0.0140401 Jy ! Component: 200 - total flux cleaned = 0.0158098 Jy ! Total flux subtracted in 200 components = 0.0158098 Jy ! Clean residual min=-0.003752 max=0.003657 Jy/beam ! Clean residual mean=0.000008 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.103864 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 56 components and 0.103864 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=18.26 mas, bpa=6.49 degrees ! Estimated noise=1991.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288441 Jy ! Component: 100 - total flux cleaned = 0.00376955 Jy ! Component: 150 - total flux cleaned = 0.00453274 Jy ! Component: 200 - total flux cleaned = 0.00494697 Jy ! Total flux subtracted in 200 components = 0.00494697 Jy ! Clean residual min=-0.003999 max=0.004072 Jy/beam ! Clean residual mean=0.000016 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.108811 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358522 Jy ! Component: 100 - total flux cleaned = 0.000638388 Jy ! Component: 150 - total flux cleaned = 0.000781687 Jy ! Component: 200 - total flux cleaned = 0.00087987 Jy ! Total flux subtracted in 200 components = 0.00087987 Jy ! Clean residual min=-0.003880 max=0.004081 Jy/beam ! Clean residual mean=0.000015 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.109691 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 83 components and 0.109691 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=7.206 mas, bpa=-0.9819 degrees ! Estimated noise=1469.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612417 Jy ! Component: 100 - total flux cleaned = 0.000460102 Jy ! Component: 150 - total flux cleaned = 0.000393013 Jy ! Component: 200 - total flux cleaned = 0.000501571 Jy ! Total flux subtracted in 200 components = 0.000501571 Jy ! Clean residual min=-0.003299 max=0.003470 Jy/beam ! Clean residual mean=0.000007 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.110192 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.110192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108085Jy sigma=0.000642 ! Fit after self-cal, rms=0.108073Jy sigma=0.000642 wmodel J1603-2933_S_2017_02_19_pus_map.mod ! Writing 97 model components to file: J1603-2933_S_2017_02_19_pus_map.mod wobs J1603-2933_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1603-2933_S_2017_02_19_pus_uvs.fits wwins J1603-2933_S_2017_02_19_pus_map.win ! wwins: Wrote 4 windows to J1603-2933_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530893 Jy ! Component: 100 - total flux cleaned = 4.97398e-05 Jy ! Component: 150 - total flux cleaned = -0.000397836 Jy ! Component: 200 - total flux cleaned = -0.000586382 Jy ! Component: 250 - total flux cleaned = -0.000811957 Jy ! Component: 300 - total flux cleaned = -0.000985997 Jy ! Component: 350 - total flux cleaned = -0.00127961 Jy ! Component: 400 - total flux cleaned = -0.00144216 Jy ! Component: 450 - total flux cleaned = -0.00155999 Jy ! Component: 500 - total flux cleaned = -0.00155964 Jy ! Component: 550 - total flux cleaned = -0.00152329 Jy ! Component: 600 - total flux cleaned = -0.0017065 Jy ! Component: 650 - total flux cleaned = -0.00170698 Jy ! Component: 700 - total flux cleaned = -0.00177664 Jy ! Component: 750 - total flux cleaned = -0.00170918 Jy ! Component: 800 - total flux cleaned = -0.00174376 Jy ! Component: 850 - total flux cleaned = -0.00177695 Jy ! Component: 900 - total flux cleaned = -0.0018095 Jy ! Component: 950 - total flux cleaned = -0.00187165 Jy ! Component: 1000 - total flux cleaned = -0.00190255 Jy ! Component: 1050 - total flux cleaned = -0.00196332 Jy ! Component: 1100 - total flux cleaned = -0.00193417 Jy ! Component: 1150 - total flux cleaned = -0.00205145 Jy ! Component: 1200 - total flux cleaned = -0.00205116 Jy ! Component: 1250 - total flux cleaned = -0.00213598 Jy ! Component: 1300 - total flux cleaned = -0.00210839 Jy ! Component: 1350 - total flux cleaned = -0.00219101 Jy ! Component: 1400 - total flux cleaned = -0.00229817 Jy ! Component: 1450 - total flux cleaned = -0.00227202 Jy ! Component: 1500 - total flux cleaned = -0.00235026 Jy ! Component: 1550 - total flux cleaned = -0.00237559 Jy ! Component: 1600 - total flux cleaned = -0.00237498 Jy ! Component: 1650 - total flux cleaned = -0.00242451 Jy ! Component: 1700 - total flux cleaned = -0.00242399 Jy ! Component: 1750 - total flux cleaned = -0.0024966 Jy ! Component: 1800 - total flux cleaned = -0.00240046 Jy ! Component: 1850 - total flux cleaned = -0.00244804 Jy ! Component: 1900 - total flux cleaned = -0.00242473 Jy ! Component: 1950 - total flux cleaned = -0.00251749 Jy ! Component: 2000 - total flux cleaned = -0.00244888 Jy ! Component: 2050 - total flux cleaned = -0.00247152 Jy ! Component: 2100 - total flux cleaned = -0.00244941 Jy ! Component: 2150 - total flux cleaned = -0.00251603 Jy ! Component: 2200 - total flux cleaned = -0.00251624 Jy ! Component: 2250 - total flux cleaned = -0.00253761 Jy ! Component: 2300 - total flux cleaned = -0.00253754 Jy ! Component: 2350 - total flux cleaned = -0.00251635 Jy ! Component: 2400 - total flux cleaned = -0.00253732 Jy ! Component: 2450 - total flux cleaned = -0.00251645 Jy ! Component: 2500 - total flux cleaned = -0.00247542 Jy ! Component: 2550 - total flux cleaned = -0.00249568 Jy ! Component: 2600 - total flux cleaned = -0.00245562 Jy ! Component: 2650 - total flux cleaned = -0.0024359 Jy ! Component: 2700 - total flux cleaned = -0.00247531 Jy ! Component: 2750 - total flux cleaned = -0.00243658 Jy ! Component: 2800 - total flux cleaned = -0.00243661 Jy ! Component: 2850 - total flux cleaned = -0.00241774 Jy ! Component: 2900 - total flux cleaned = -0.0024365 Jy ! Component: 2950 - total flux cleaned = -0.0023802 Jy ! Component: 3000 - total flux cleaned = -0.00230592 Jy ! Component: 3050 - total flux cleaned = -0.00226908 Jy ! Component: 3100 - total flux cleaned = -0.00228743 Jy ! Component: 3150 - total flux cleaned = -0.00228741 Jy ! Component: 3200 - total flux cleaned = -0.00225159 Jy ! Component: 3250 - total flux cleaned = -0.00225148 Jy ! Component: 3300 - total flux cleaned = -0.00225144 Jy ! Component: 3350 - total flux cleaned = -0.00225133 Jy ! Component: 3400 - total flux cleaned = -0.00223408 Jy ! Component: 3450 - total flux cleaned = -0.0021824 Jy ! Component: 3500 - total flux cleaned = -0.0021654 Jy ! Component: 3550 - total flux cleaned = -0.00218231 Jy ! Component: 3600 - total flux cleaned = -0.00218225 Jy ! Component: 3650 - total flux cleaned = -0.00209838 Jy ! Component: 3700 - total flux cleaned = -0.0020817 Jy ! Component: 3750 - total flux cleaned = -0.00201566 Jy ! Component: 3800 - total flux cleaned = -0.00199937 Jy ! Component: 3850 - total flux cleaned = -0.00196669 Jy ! Component: 3900 - total flux cleaned = -0.00195063 Jy ! Component: 3950 - total flux cleaned = -0.00198287 Jy ! Component: 4000 - total flux cleaned = -0.00201482 Jy ! Component: 4050 - total flux cleaned = -0.00201472 Jy ! Total flux subtracted in 4096 components = -0.00199886 Jy ! Clean residual min=-0.001059 max=0.000965 Jy/beam ! Clean residual mean=0.000001 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.108194 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 385 components and 0.108194 Jy ![Exited script file: muppet] wmap "J1603-2933_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.838 x 7.206 at -0.9819 degrees (North through East) ! Clean map min=-0.002684 max=0.076523 Jy/beam ! Writing clean map to FITS file: J1603-2933_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0765228 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000263846 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03438 1.03438 2.06876 4.13753 8.27505 16.5501 33.1002 66.2004 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.838 x 7.206 at -0.9819 degrees (North through East) ! Clean map min=-0.002684 max=0.076523 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1603-2933_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:54:05 2019