! Started logfile: J1603-1007_S_2017_07_16_pus_uvs.log on Thu May 9 11:12:53 2019 obs J1603-1007_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1603-1007_S_2017_07_16_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.40119 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1603-1007 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 4044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1603-1007_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 488 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893913Jy sigma=0.007334 ! Fit after self-cal, rms=0.877899Jy sigma=0.007221 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=8.163 mas, bpa=9.767 degrees ! Estimated noise=2028.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0971746 Jy ! Component: 100 - total flux cleaned = 0.120731 Jy ! Total flux subtracted in 100 components = 0.120731 Jy ! Clean residual min=-0.007661 max=0.009583 Jy/beam ! Clean residual mean=-0.000001 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 0.120731 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.120731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081999Jy sigma=0.000655 ! Fit after self-cal, rms=0.081987Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=9.307 mas, bpa=11.48 degrees ! Estimated noise=1592.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106166 Jy ! Component: 100 - total flux cleaned = 0.0154022 Jy ! Component: 150 - total flux cleaned = 0.0177891 Jy ! Component: 200 - total flux cleaned = 0.0185674 Jy ! Total flux subtracted in 200 components = 0.0185674 Jy ! Clean residual min=-0.003801 max=0.004032 Jy/beam ! Clean residual mean=0.000001 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.139298 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.139298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080726Jy sigma=0.000645 ! Fit after self-cal, rms=0.080707Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.05 ! LA 1.00 MK 1.00* NL 0.85 OV 1.04 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.03 ! LA 0.95 MK 1.00* NL 1.08 OV 1.00 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.03 ! LA 0.97 MK 1.00* NL 1.01 OV 0.93 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.080707Jy sigma=0.000645 ! Fit after self-cal, rms=0.080010Jy sigma=0.000643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=10.07 mas, bpa=13.84 degrees ! Estimated noise=1602.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161418 Jy ! Component: 100 - total flux cleaned = 9.29041e-05 Jy ! Component: 150 - total flux cleaned = -2.6217e-05 Jy ! Component: 200 - total flux cleaned = -0.000129054 Jy ! Total flux subtracted in 200 components = -0.000129054 Jy ! Clean residual min=-0.003408 max=0.004648 Jy/beam ! Clean residual mean=-0.000003 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.139169 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.139169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079986Jy sigma=0.000643 ! Fit after self-cal, rms=0.080005Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080005Jy sigma=0.000643 ! Fit after self-cal, rms=0.079700Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=10.03 mas, bpa=13.92 degrees ! Estimated noise=1599.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038336 Jy ! Component: 100 - total flux cleaned = 0.000405056 Jy ! Component: 150 - total flux cleaned = 0.000405421 Jy ! Component: 200 - total flux cleaned = 0.000405004 Jy ! Total flux subtracted in 200 components = 0.000405004 Jy ! Clean residual min=-0.003261 max=0.003628 Jy/beam ! Clean residual mean=-0.000001 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.139574 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 36 components and 0.139574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079689Jy sigma=0.000641 ! Fit after self-cal, rms=0.079701Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-125, 82.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204006 Jy ! Component: 100 - total flux cleaned = 0.00236012 Jy ! Component: 150 - total flux cleaned = 0.00242803 Jy ! Component: 200 - total flux cleaned = 0.00238632 Jy ! Total flux subtracted in 200 components = 0.00238632 Jy ! Clean residual min=-0.003360 max=0.003525 Jy/beam ! Clean residual mean=-0.000001 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.14196 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.14196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079534Jy sigma=0.000639 ! Fit after self-cal, rms=0.079515Jy sigma=0.000639 ! Inverting map ! Added new window around map position (73.5, 41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254066 Jy ! Component: 100 - total flux cleaned = -0.000780878 Jy ! Component: 150 - total flux cleaned = -0.000791509 Jy ! Component: 200 - total flux cleaned = -0.000792964 Jy ! Total flux subtracted in 200 components = -0.000792964 Jy ! Clean residual min=-0.002377 max=0.003052 Jy/beam ! Clean residual mean=-0.000001 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.141167 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.141167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079318Jy sigma=0.000638 ! Fit after self-cal, rms=0.079299Jy sigma=0.000638 ! Inverting map ! Added new window around map position (118, -123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204759 Jy ! Component: 100 - total flux cleaned = 0.0021066 Jy ! Component: 150 - total flux cleaned = 0.00226578 Jy ! Component: 200 - total flux cleaned = 0.00245979 Jy ! Total flux subtracted in 200 components = 0.00245979 Jy ! Clean residual min=-0.002434 max=0.002114 Jy/beam ! Clean residual mean=0.000000 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.143627 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.143627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079190Jy sigma=0.000637 ! Fit after self-cal, rms=0.079178Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079178Jy sigma=0.000637 ! Fit after self-cal, rms=0.079176Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=10.02 mas, bpa=13.94 degrees ! Estimated noise=1597.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105487 Jy ! Component: 100 - total flux cleaned = 0.00120376 Jy ! Component: 150 - total flux cleaned = 0.001074 Jy ! Component: 200 - total flux cleaned = 0.000956386 Jy ! Total flux subtracted in 200 components = 0.000956386 Jy ! Clean residual min=-0.002331 max=0.001862 Jy/beam ! Clean residual mean=-0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.144583 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 0.144583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079124Jy sigma=0.000636 ! Fit after self-cal, rms=0.079126Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.41351e-05 Jy ! Component: 100 - total flux cleaned = 9.39884e-05 Jy ! Component: 150 - total flux cleaned = 5.94163e-05 Jy ! Component: 200 - total flux cleaned = 2.74723e-05 Jy ! Total flux subtracted in 200 components = 2.74723e-05 Jy ! Clean residual min=-0.002284 max=0.001782 Jy/beam ! Clean residual mean=-0.000001 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.144611 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 114 components and 0.144611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079097Jy sigma=0.000636 ! Fit after self-cal, rms=0.079094Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079094Jy sigma=0.000636 ! Fit after self-cal, rms=0.079177Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.727 mas, bmaj=14.74 mas, bpa=-1.32 degrees ! Estimated noise=1984.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161432 Jy ! Component: 100 - total flux cleaned = 0.000105903 Jy ! Component: 150 - total flux cleaned = 8.0922e-05 Jy ! Component: 200 - total flux cleaned = 1.22579e-05 Jy ! Total flux subtracted in 200 components = 1.22579e-05 Jy ! Clean residual min=-0.001613 max=0.001398 Jy/beam ! Clean residual mean=-0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.144623 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.144623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079165Jy sigma=0.000636 ! Fit after self-cal, rms=0.079166Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145168 Jy ! Component: 100 - total flux cleaned = 8.36294e-05 Jy ! Component: 150 - total flux cleaned = -3.20347e-05 Jy ! Component: 200 - total flux cleaned = -0.000125193 Jy ! Total flux subtracted in 200 components = -0.000125193 Jy ! Clean residual min=-0.001594 max=0.001371 Jy/beam ! Clean residual mean=-0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.144498 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 0.144498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079159Jy sigma=0.000636 ! Fit after self-cal, rms=0.079157Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=10.01 mas, bpa=13.97 degrees ! Estimated noise=1597.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 10.01 at 13.97 degrees (North through East) ! Clean map min=-0.0033525 max=0.12363 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=9.127 mas, bpa=13.64 degrees ! Estimated noise=2023.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0957554 Jy ! Component: 100 - total flux cleaned = 0.119882 Jy ! Component: 150 - total flux cleaned = 0.128328 Jy ! Component: 200 - total flux cleaned = 0.132608 Jy ! Total flux subtracted in 200 components = 0.132608 Jy ! Clean residual min=-0.005501 max=0.005290 Jy/beam ! Clean residual mean=-0.000001 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.132608 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.132608 Jy ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=10.01 mas, bpa=13.97 degrees ! Estimated noise=1597.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506792 Jy ! Component: 100 - total flux cleaned = 0.00774824 Jy ! Component: 150 - total flux cleaned = 0.00923353 Jy ! Component: 200 - total flux cleaned = 0.0101895 Jy ! Total flux subtracted in 200 components = 0.0101895 Jy ! Clean residual min=-0.002925 max=0.002852 Jy/beam ! Clean residual mean=0.000000 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.142797 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.142797 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.727 mas, bmaj=14.74 mas, bpa=-1.32 degrees ! Estimated noise=1984.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224572 Jy ! Component: 100 - total flux cleaned = 0.0027493 Jy ! Component: 150 - total flux cleaned = 0.00315789 Jy ! Component: 200 - total flux cleaned = 0.00334142 Jy ! Total flux subtracted in 200 components = 0.00334142 Jy ! Clean residual min=-0.002085 max=0.001890 Jy/beam ! Clean residual mean=-0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.146139 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122057 Jy ! Component: 100 - total flux cleaned = -0.000314101 Jy ! Component: 150 - total flux cleaned = -0.000494253 Jy ! Component: 200 - total flux cleaned = -0.000596573 Jy ! Total flux subtracted in 200 components = -0.000596573 Jy ! Clean residual min=-0.001905 max=0.001667 Jy/beam ! Clean residual mean=-0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.145542 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 76 components and 0.145542 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=10.01 mas, bpa=13.97 degrees ! Estimated noise=1597.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123998 Jy ! Component: 100 - total flux cleaned = -0.000123511 Jy ! Component: 150 - total flux cleaned = -0.000293613 Jy ! Component: 200 - total flux cleaned = -0.000549624 Jy ! Total flux subtracted in 200 components = -0.000549624 Jy ! Clean residual min=-0.002445 max=0.002119 Jy/beam ! Clean residual mean=-0.000001 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.144993 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 99 components and 0.144993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079233Jy sigma=0.000636 ! Fit after self-cal, rms=0.079233Jy sigma=0.000636 wmodel J1603-1007_S_2017_07_16_pus_map.mod ! Writing 99 model components to file: J1603-1007_S_2017_07_16_pus_map.mod wobs J1603-1007_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1603-1007_S_2017_07_16_pus_uvs.fits wwins J1603-1007_S_2017_07_16_pus_map.win ! wwins: Wrote 4 windows to J1603-1007_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00097966 Jy ! Component: 100 - total flux cleaned = -0.00145157 Jy ! Component: 150 - total flux cleaned = -0.00168241 Jy ! Component: 200 - total flux cleaned = -0.00183809 Jy ! Component: 250 - total flux cleaned = -0.00195685 Jy ! Component: 300 - total flux cleaned = -0.00207064 Jy ! Component: 350 - total flux cleaned = -0.00220706 Jy ! Component: 400 - total flux cleaned = -0.00236391 Jy ! Component: 450 - total flux cleaned = -0.00251398 Jy ! Component: 500 - total flux cleaned = -0.00258589 Jy ! Component: 550 - total flux cleaned = -0.00270263 Jy ! Component: 600 - total flux cleaned = -0.00281569 Jy ! Component: 650 - total flux cleaned = -0.00290285 Jy ! Component: 700 - total flux cleaned = -0.00296587 Jy ! Component: 750 - total flux cleaned = -0.00306899 Jy ! Component: 800 - total flux cleaned = -0.00312905 Jy ! Component: 850 - total flux cleaned = -0.00318824 Jy ! Component: 900 - total flux cleaned = -0.0033035 Jy ! Component: 950 - total flux cleaned = -0.00335947 Jy ! Component: 1000 - total flux cleaned = -0.00345118 Jy ! Component: 1050 - total flux cleaned = -0.00352268 Jy ! Component: 1100 - total flux cleaned = -0.00359284 Jy ! Component: 1150 - total flux cleaned = -0.00362739 Jy ! Component: 1200 - total flux cleaned = -0.00377932 Jy ! Component: 1250 - total flux cleaned = -0.00384562 Jy ! Component: 1300 - total flux cleaned = -0.00391075 Jy ! Component: 1350 - total flux cleaned = -0.00399085 Jy ! Component: 1400 - total flux cleaned = -0.0040379 Jy ! Component: 1450 - total flux cleaned = -0.00405343 Jy ! Component: 1500 - total flux cleaned = -0.00409927 Jy ! Component: 1550 - total flux cleaned = -0.00414437 Jy ! Component: 1600 - total flux cleaned = -0.00420387 Jy ! Component: 1650 - total flux cleaned = -0.00424769 Jy ! Component: 1700 - total flux cleaned = -0.00427642 Jy ! Component: 1750 - total flux cleaned = -0.00431941 Jy ! Component: 1800 - total flux cleaned = -0.00436141 Jy ! Component: 1850 - total flux cleaned = -0.00440283 Jy ! Component: 1900 - total flux cleaned = -0.00443002 Jy ! Component: 1950 - total flux cleaned = -0.00448385 Jy ! Component: 2000 - total flux cleaned = -0.00451037 Jy ! Component: 2050 - total flux cleaned = -0.00452342 Jy ! Component: 2100 - total flux cleaned = -0.00452339 Jy ! Component: 2150 - total flux cleaned = -0.00453617 Jy ! Component: 2200 - total flux cleaned = -0.0045616 Jy ! Component: 2250 - total flux cleaned = -0.0045362 Jy ! Component: 2300 - total flux cleaned = -0.00452365 Jy ! Component: 2350 - total flux cleaned = -0.00451125 Jy ! Component: 2400 - total flux cleaned = -0.00449888 Jy ! Component: 2450 - total flux cleaned = -0.00448673 Jy ! Component: 2500 - total flux cleaned = -0.00446262 Jy ! Component: 2550 - total flux cleaned = -0.00445076 Jy ! Component: 2600 - total flux cleaned = -0.00442714 Jy ! Component: 2650 - total flux cleaned = -0.00441525 Jy ! Component: 2700 - total flux cleaned = -0.00435699 Jy ! Component: 2750 - total flux cleaned = -0.00433399 Jy ! Component: 2800 - total flux cleaned = -0.00434548 Jy ! Component: 2850 - total flux cleaned = -0.00433407 Jy ! Component: 2900 - total flux cleaned = -0.00433406 Jy ! Component: 2950 - total flux cleaned = -0.00431159 Jy ! Component: 3000 - total flux cleaned = -0.00426682 Jy ! Component: 3050 - total flux cleaned = -0.00423343 Jy ! Component: 3100 - total flux cleaned = -0.00420018 Jy ! Component: 3150 - total flux cleaned = -0.00416706 Jy ! Component: 3200 - total flux cleaned = -0.00415608 Jy ! Component: 3250 - total flux cleaned = -0.00411242 Jy ! Component: 3300 - total flux cleaned = -0.00404745 Jy ! Component: 3350 - total flux cleaned = -0.00402594 Jy ! Component: 3400 - total flux cleaned = -0.00399379 Jy ! Component: 3450 - total flux cleaned = -0.00398313 Jy ! Component: 3500 - total flux cleaned = -0.00392998 Jy ! Component: 3550 - total flux cleaned = -0.00390886 Jy ! Component: 3600 - total flux cleaned = -0.00387727 Jy ! Component: 3650 - total flux cleaned = -0.00386684 Jy ! Component: 3700 - total flux cleaned = -0.00385644 Jy ! Component: 3750 - total flux cleaned = -0.00383561 Jy ! Component: 3800 - total flux cleaned = -0.0037836 Jy ! Component: 3850 - total flux cleaned = -0.00374219 Jy ! Component: 3900 - total flux cleaned = -0.00374222 Jy ! Component: 3950 - total flux cleaned = -0.00371126 Jy ! Component: 4000 - total flux cleaned = -0.00368039 Jy ! Component: 4050 - total flux cleaned = -0.00367009 Jy ! Total flux subtracted in 4096 components = -0.00363927 Jy ! Clean residual min=-0.000615 max=0.000566 Jy/beam ! Clean residual mean=-0.000001 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.141353 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 359 components and 0.141353 Jy ![Exited script file: muppet] wmap "J1603-1007_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 10.01 at 13.97 degrees (North through East) ! Clean map min=-0.0029913 max=0.12419 Jy/beam ! Writing clean map to FITS file: J1603-1007_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124194 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171887 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415203 0.415203 0.830407 1.66081 3.32163 6.64325 13.2865 26.573 53.146 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 10.01 at 13.97 degrees (North through East) ! Clean map min=-0.0029913 max=0.12419 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1603-1007_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:12:57 2019