! Started logfile: J1603+6945_S_2017_08_05_pus_uvs.log on Thu May 9 19:33:15 2019 obs J1603+6945_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1603+6945_S_2017_08_05_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.953968 visibilities/baseline/integration-bin. ! Found source: J1603+6945 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 14424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1603+6945_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 443 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.888314Jy sigma=0.007863 ! Fit after self-cal, rms=0.878906Jy sigma=0.007787 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=3.632 mas, bpa=85.89 degrees ! Estimated noise=1090.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0929615 Jy ! Component: 100 - total flux cleaned = 0.114066 Jy ! Total flux subtracted in 100 components = 0.114066 Jy ! Clean residual min=-0.006654 max=0.026958 Jy/beam ! Clean residual mean=-0.000032 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.114066 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.114066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093424Jy sigma=0.000765 ! Fit after self-cal, rms=0.093418Jy sigma=0.000765 ! Inverting map ! Added new window around map position (-12.5, -9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219826 Jy ! Component: 100 - total flux cleaned = 0.0316251 Jy ! Total flux subtracted in 100 components = 0.0316251 Jy ! Clean residual min=-0.005080 max=0.008734 Jy/beam ! Clean residual mean=-0.000018 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.145691 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.145691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087709Jy sigma=0.000715 ! Fit after self-cal, rms=0.087020Jy sigma=0.000709 ! Inverting map ! Added new window around map position (-6.5, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100871 Jy ! Component: 100 - total flux cleaned = 0.0161398 Jy ! Total flux subtracted in 100 components = 0.0161398 Jy ! Clean residual min=-0.004204 max=0.007038 Jy/beam ! Clean residual mean=-0.000013 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.161831 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.161831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085559Jy sigma=0.000697 ! Fit after self-cal, rms=0.085460Jy sigma=0.000696 ! Inverting map ! Added new window around map position (-29.5, -23). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654336 Jy ! Component: 100 - total flux cleaned = 0.0110121 Jy ! Total flux subtracted in 100 components = 0.0110121 Jy ! Clean residual min=-0.003585 max=0.003924 Jy/beam ! Clean residual mean=-0.000010 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.172843 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.172843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084791Jy sigma=0.000691 ! Fit after self-cal, rms=0.084760Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=4.306 mas, bpa=75.95 degrees ! Estimated noise=763.465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479676 Jy ! Component: 100 - total flux cleaned = 0.00842359 Jy ! Component: 150 - total flux cleaned = 0.0112883 Jy ! Component: 200 - total flux cleaned = 0.0136005 Jy ! Total flux subtracted in 200 components = 0.0136005 Jy ! Clean residual min=-0.002785 max=0.003344 Jy/beam ! Clean residual mean=-0.000010 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.186443 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 85 components and 0.186443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084258Jy sigma=0.000688 ! Fit after self-cal, rms=0.084243Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.07 ! LA 1.02 MK 1.01 NL 0.88 OV 1.04 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 HN 1.00 KP 1.00 ! LA 1.01 MK 1.05 NL 0.99 OV 1.05 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.09 HN 1.01 KP 0.88 ! LA 0.76 MK 1.09 NL 1.19 OV 1.01 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.92 KP 1.00* ! LA 0.78 MK 1.09 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.084243Jy sigma=0.000688 ! Fit after self-cal, rms=0.080122Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.01 mas, bmaj=4.344 mas, bpa=73.82 degrees ! Estimated noise=760.058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-37.5, -31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279738 Jy ! Component: 100 - total flux cleaned = 0.00439434 Jy ! Component: 150 - total flux cleaned = 0.00520244 Jy ! Component: 200 - total flux cleaned = 0.00570946 Jy ! Total flux subtracted in 200 components = 0.00570946 Jy ! Clean residual min=-0.002182 max=0.002255 Jy/beam ! Clean residual mean=-0.000007 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.192153 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 108 components and 0.192153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080009Jy sigma=0.000675 ! Fit after self-cal, rms=0.079954Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079954Jy sigma=0.000675 ! Fit after self-cal, rms=0.079714Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=4.344 mas, bpa=70.04 degrees ! Estimated noise=759.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110735 Jy ! Component: 100 - total flux cleaned = 0.00161966 Jy ! Component: 150 - total flux cleaned = 0.00206262 Jy ! Component: 200 - total flux cleaned = 0.00223107 Jy ! Total flux subtracted in 200 components = 0.00223107 Jy ! Clean residual min=-0.002153 max=0.002115 Jy/beam ! Clean residual mean=-0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.194384 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.194384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079688Jy sigma=0.000673 ! Fit after self-cal, rms=0.079690Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291369 Jy ! Component: 100 - total flux cleaned = 0.000378205 Jy ! Component: 150 - total flux cleaned = 0.000478459 Jy ! Component: 200 - total flux cleaned = 0.000571693 Jy ! Total flux subtracted in 200 components = 0.000571693 Jy ! Clean residual min=-0.002144 max=0.002088 Jy/beam ! Clean residual mean=-0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.194955 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 139 components and 0.194955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079680Jy sigma=0.000673 ! Fit after self-cal, rms=0.079679Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079679Jy sigma=0.000673 ! Fit after self-cal, rms=0.079716Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.008 mas, bmaj=4.341 mas, bpa=69.57 degrees ! Estimated noise=759.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390519 Jy ! Component: 100 - total flux cleaned = 0.000564629 Jy ! Component: 150 - total flux cleaned = 0.000689817 Jy ! Component: 200 - total flux cleaned = 0.000739613 Jy ! Total flux subtracted in 200 components = 0.000739613 Jy ! Clean residual min=-0.002143 max=0.002087 Jy/beam ! Clean residual mean=-0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.195695 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 149 components and 0.195695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079707Jy sigma=0.000673 ! Fit after self-cal, rms=0.079708Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.41255e-05 Jy ! Component: 100 - total flux cleaned = 0.0001001 Jy ! Component: 150 - total flux cleaned = 0.000130915 Jy ! Component: 200 - total flux cleaned = 0.000160384 Jy ! Total flux subtracted in 200 components = 0.000160384 Jy ! Clean residual min=-0.002132 max=0.002062 Jy/beam ! Clean residual mean=-0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.195855 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 152 components and 0.195855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079702Jy sigma=0.000673 ! Fit after self-cal, rms=0.079702Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079702Jy sigma=0.000673 ! Fit after self-cal, rms=0.079691Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.086 mas, bmaj=9.086 mas, bpa=71.46 degrees ! Estimated noise=969.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606146 Jy ! Component: 100 - total flux cleaned = 0.000733631 Jy ! Component: 150 - total flux cleaned = 0.000805096 Jy ! Component: 200 - total flux cleaned = 0.000850735 Jy ! Total flux subtracted in 200 components = 0.000850735 Jy ! Clean residual min=-0.002041 max=0.002221 Jy/beam ! Clean residual mean=-0.000004 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.196706 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 163 components and 0.196706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079693Jy sigma=0.000673 ! Fit after self-cal, rms=0.079692Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.99252e-05 Jy ! Component: 100 - total flux cleaned = 4.40922e-05 Jy ! Component: 150 - total flux cleaned = 8.09021e-05 Jy ! Component: 200 - total flux cleaned = 0.000102232 Jy ! Total flux subtracted in 200 components = 0.000102232 Jy ! Clean residual min=-0.002029 max=0.002208 Jy/beam ! Clean residual mean=-0.000004 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.196808 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 168 components and 0.196808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079693Jy sigma=0.000673 ! Fit after self-cal, rms=0.079693Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=4.339 mas, bpa=69.27 degrees ! Estimated noise=758.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.009 x 4.339 at 69.27 degrees (North through East) ! Clean map min=-0.0020204 max=0.11918 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=3.647 mas, bpa=80.64 degrees ! Estimated noise=1083.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0920456 Jy ! Component: 100 - total flux cleaned = 0.123246 Jy ! Component: 150 - total flux cleaned = 0.139487 Jy ! Component: 200 - total flux cleaned = 0.150196 Jy ! Total flux subtracted in 200 components = 0.150196 Jy ! Clean residual min=-0.004218 max=0.006131 Jy/beam ! Clean residual mean=-0.000011 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.150196 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.150196 Jy ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=4.339 mas, bpa=69.27 degrees ! Estimated noise=758.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00986052 Jy ! Component: 100 - total flux cleaned = 0.0169128 Jy ! Component: 150 - total flux cleaned = 0.0221863 Jy ! Component: 200 - total flux cleaned = 0.0263689 Jy ! Total flux subtracted in 200 components = 0.0263689 Jy ! Clean residual min=-0.002766 max=0.002535 Jy/beam ! Clean residual mean=-0.000010 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.176565 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 61 components and 0.176565 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.086 mas, bmaj=9.086 mas, bpa=71.46 degrees ! Estimated noise=969.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560208 Jy ! Component: 100 - total flux cleaned = 0.00937141 Jy ! Component: 150 - total flux cleaned = 0.0120825 Jy ! Component: 200 - total flux cleaned = 0.0140848 Jy ! Total flux subtracted in 200 components = 0.0140848 Jy ! Clean residual min=-0.002342 max=0.002278 Jy/beam ! Clean residual mean=-0.000010 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.19065 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151564 Jy ! Component: 100 - total flux cleaned = 0.00268454 Jy ! Component: 150 - total flux cleaned = 0.00359426 Jy ! Component: 200 - total flux cleaned = 0.00430546 Jy ! Total flux subtracted in 200 components = 0.00430546 Jy ! Clean residual min=-0.002154 max=0.002226 Jy/beam ! Clean residual mean=-0.000007 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.194955 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 149 components and 0.194955 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=4.339 mas, bpa=69.27 degrees ! Estimated noise=758.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289684 Jy ! Component: 100 - total flux cleaned = 0.000547951 Jy ! Component: 150 - total flux cleaned = 0.000700283 Jy ! Component: 200 - total flux cleaned = 0.000870818 Jy ! Total flux subtracted in 200 components = 0.000870818 Jy ! Clean residual min=-0.002263 max=0.002051 Jy/beam ! Clean residual mean=-0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.195826 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 162 components and 0.195826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079744Jy sigma=0.000673 ! Fit after self-cal, rms=0.079736Jy sigma=0.000673 wmodel J1603+6945_S_2017_08_05_pus_map.mod ! Writing 162 model components to file: J1603+6945_S_2017_08_05_pus_map.mod wobs J1603+6945_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1603+6945_S_2017_08_05_pus_uvs.fits wwins J1603+6945_S_2017_08_05_pus_map.win ! wwins: Wrote 5 windows to J1603+6945_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214588 Jy ! Component: 100 - total flux cleaned = -0.000282908 Jy ! Component: 150 - total flux cleaned = -0.000348096 Jy ! Component: 200 - total flux cleaned = -0.000347852 Jy ! Component: 250 - total flux cleaned = -0.000318558 Jy ! Component: 300 - total flux cleaned = -0.000318373 Jy ! Component: 350 - total flux cleaned = -0.000346742 Jy ! Component: 400 - total flux cleaned = -0.000401178 Jy ! Component: 450 - total flux cleaned = -0.000347774 Jy ! Component: 500 - total flux cleaned = -0.000451078 Jy ! Component: 550 - total flux cleaned = -0.000475815 Jy ! Component: 600 - total flux cleaned = -0.000500672 Jy ! Component: 650 - total flux cleaned = -0.000549739 Jy ! Component: 700 - total flux cleaned = -0.00069446 Jy ! Component: 750 - total flux cleaned = -0.00076509 Jy ! Component: 800 - total flux cleaned = -0.000765149 Jy ! Component: 850 - total flux cleaned = -0.000833897 Jy ! Component: 900 - total flux cleaned = -0.000879075 Jy ! Component: 950 - total flux cleaned = -0.000945774 Jy ! Component: 1000 - total flux cleaned = -0.000989977 Jy ! Component: 1050 - total flux cleaned = -0.000989732 Jy ! Component: 1100 - total flux cleaned = -0.00107602 Jy ! Component: 1150 - total flux cleaned = -0.00105433 Jy ! Component: 1200 - total flux cleaned = -0.00113836 Jy ! Component: 1250 - total flux cleaned = -0.00113854 Jy ! Component: 1300 - total flux cleaned = -0.00115936 Jy ! Component: 1350 - total flux cleaned = -0.00130174 Jy ! Component: 1400 - total flux cleaned = -0.00134183 Jy ! Component: 1450 - total flux cleaned = -0.00142116 Jy ! Component: 1500 - total flux cleaned = -0.00144072 Jy ! Component: 1550 - total flux cleaned = -0.00149919 Jy ! Component: 1600 - total flux cleaned = -0.00155724 Jy ! Component: 1650 - total flux cleaned = -0.00163395 Jy ! Component: 1700 - total flux cleaned = -0.00170999 Jy ! Component: 1750 - total flux cleaned = -0.00165328 Jy ! Component: 1800 - total flux cleaned = -0.00169072 Jy ! Component: 1850 - total flux cleaned = -0.00170903 Jy ! Component: 1900 - total flux cleaned = -0.00170924 Jy ! Component: 1950 - total flux cleaned = -0.00174558 Jy ! Component: 2000 - total flux cleaned = -0.00172749 Jy ! Component: 2050 - total flux cleaned = -0.00170957 Jy ! Component: 2100 - total flux cleaned = -0.00176282 Jy ! Component: 2150 - total flux cleaned = -0.00172761 Jy ! Component: 2200 - total flux cleaned = -0.00174498 Jy ! Component: 2250 - total flux cleaned = -0.00172776 Jy ! Component: 2300 - total flux cleaned = -0.00176223 Jy ! Component: 2350 - total flux cleaned = -0.00172794 Jy ! Component: 2400 - total flux cleaned = -0.00171111 Jy ! Component: 2450 - total flux cleaned = -0.00171126 Jy ! Component: 2500 - total flux cleaned = -0.00171141 Jy ! Component: 2550 - total flux cleaned = -0.00172794 Jy ! Component: 2600 - total flux cleaned = -0.00169511 Jy ! Component: 2650 - total flux cleaned = -0.00172777 Jy ! Component: 2700 - total flux cleaned = -0.00174357 Jy ! Component: 2750 - total flux cleaned = -0.00167941 Jy ! Component: 2800 - total flux cleaned = -0.00167966 Jy ! Component: 2850 - total flux cleaned = -0.00164806 Jy ! Component: 2900 - total flux cleaned = -0.00161667 Jy ! Component: 2950 - total flux cleaned = -0.00158561 Jy ! Component: 3000 - total flux cleaned = -0.00158556 Jy ! Component: 3050 - total flux cleaned = -0.00155497 Jy ! Component: 3100 - total flux cleaned = -0.00143325 Jy ! Component: 3150 - total flux cleaned = -0.00138796 Jy ! Component: 3200 - total flux cleaned = -0.00134285 Jy ! Component: 3250 - total flux cleaned = -0.00128309 Jy ! Component: 3300 - total flux cleaned = -0.00123871 Jy ! Component: 3350 - total flux cleaned = -0.00120926 Jy ! Component: 3400 - total flux cleaned = -0.00113611 Jy ! Component: 3450 - total flux cleaned = -0.00109251 Jy ! Component: 3500 - total flux cleaned = -0.00102025 Jy ! Component: 3550 - total flux cleaned = -0.000948698 Jy ! Component: 3600 - total flux cleaned = -0.000948884 Jy ! Component: 3650 - total flux cleaned = -0.000934495 Jy ! Component: 3700 - total flux cleaned = -0.000920414 Jy ! Component: 3750 - total flux cleaned = -0.000906432 Jy ! Component: 3800 - total flux cleaned = -0.00075368 Jy ! Component: 3850 - total flux cleaned = -0.000795189 Jy ! Component: 3900 - total flux cleaned = -0.000767761 Jy ! Component: 3950 - total flux cleaned = -0.000699648 Jy ! Component: 4000 - total flux cleaned = -0.00068592 Jy ! Component: 4050 - total flux cleaned = -0.00060514 Jy ! Total flux subtracted in 4096 components = -0.000551676 Jy ! Clean residual min=-0.000844 max=0.000759 Jy/beam ! Clean residual mean=0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.195274 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 459 components and 0.195274 Jy ![Exited script file: muppet] wmap "J1603+6945_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.009 x 4.339 at 69.27 degrees (North through East) ! Clean map min=-0.0014575 max=0.11991 Jy/beam ! Writing clean map to FITS file: J1603+6945_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.119909 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000245943 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.615327 0.615327 1.23065 2.46131 4.92261 9.84523 19.6905 39.3809 78.7618 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.009 x 4.339 at 69.27 degrees (North through East) ! Clean map min=-0.0014575 max=0.11991 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1603+6945_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:33:21 2019