! Started logfile: J1559-0531_S_2017_05_01_pus_uvs.log on Wed May 1 18:39:40 2019 obs J1559-0531_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1559-0531_S_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.830604 visibilities/baseline/integration-bin. ! Found source: J1559-0531 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 17044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1559-0531_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 668 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906442Jy sigma=1.255684 ! Fit after self-cal, rms=0.890100Jy sigma=1.255858 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.497 mas, bmaj=9.095 mas, bpa=15.41 degrees ! Estimated noise=77.5766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379803 Jy ! Component: 100 - total flux cleaned = 0.0034652 Jy ! Total flux subtracted in 100 components = 0.0034652 Jy ! Clean residual min=-0.003527 max=0.002914 Jy/beam ! Clean residual mean=0.000007 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.0034652 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0034652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214291Jy sigma=0.005176 ! Fit after self-cal, rms=0.214233Jy sigma=0.005104 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.607 mas, bmaj=10.92 mas, bpa=19.64 degrees ! Estimated noise=38.203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000665939 Jy ! Component: 100 - total flux cleaned = -0.000852737 Jy ! Component: 150 - total flux cleaned = -0.00110839 Jy ! Component: 200 - total flux cleaned = -0.00126972 Jy ! Total flux subtracted in 200 components = -0.00126972 Jy ! Clean residual min=-0.003081 max=0.002306 Jy/beam ! Clean residual mean=-0.000004 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.00219548 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.00219548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212348Jy sigma=0.004571 ! Fit after self-cal, rms=0.212233Jy sigma=0.004553 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.28 FD 0.17 HN 0.56 KP 0.17 ! LA 0.16 MK 0.51 NL 0.30 OV 0.25 ! PT 1.32 SC 0.46 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.42 FD 0.16 HN 0.58 KP 0.16 ! LA 0.14 MK 0.50 NL 0.33 OV 0.26 ! PT 0.22 SC 0.54 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 12.56 FD 0.15 HN 0.67 KP 11.54 ! LA 7.77 MK 0.63 NL 0.40 OV 4.20 ! PT 9.45 SC 0.71 ! ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.41 FD 0.12 HN 0.48 KP 1.00* ! LA 1.00* MK 1.00 NL 1.00* OV 1.00* ! PT 2.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.212233Jy sigma=0.004553 ! Fit after self-cal, rms=3.364017Jy sigma=0.000957 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.836 mas, bmaj=10.17 mas, bpa=3.164 degrees ! Estimated noise=83.8679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346998 Jy ! Component: 100 - total flux cleaned = 0.00444988 Jy ! Component: 150 - total flux cleaned = 0.00445295 Jy ! Component: 200 - total flux cleaned = 0.00440945 Jy ! Total flux subtracted in 200 components = 0.00440945 Jy ! Clean residual min=-0.001343 max=0.001469 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.00660492 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.00660492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.363142Jy sigma=0.001020 ! Fit after self-cal, rms=3.363353Jy sigma=0.000992 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.363353Jy sigma=0.000992 ! Fit after self-cal, rms=5.266863Jy sigma=0.000810 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.499 mas, bmaj=9.669 mas, bpa=1.45 degrees ! Estimated noise=98.3662 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189611 Jy ! Component: 100 - total flux cleaned = 0.00254892 Jy ! Component: 150 - total flux cleaned = 0.0025022 Jy ! Component: 200 - total flux cleaned = 0.00243718 Jy ! Total flux subtracted in 200 components = 0.00243718 Jy ! Clean residual min=-0.000943 max=0.001021 Jy/beam ! Clean residual mean=0.000002 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.00904211 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.0090421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.266644Jy sigma=0.000814 ! Fit after self-cal, rms=5.266625Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49.5, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285923 Jy ! Component: 100 - total flux cleaned = 0.000259022 Jy ! Component: 150 - total flux cleaned = 0.000185478 Jy ! Component: 200 - total flux cleaned = 7.30247e-05 Jy ! Total flux subtracted in 200 components = 7.30247e-05 Jy ! Clean residual min=-0.000808 max=0.000995 Jy/beam ! Clean residual mean=0.000002 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.00911513 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.00911513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.266565Jy sigma=0.000804 ! Fit after self-cal, rms=5.266564Jy sigma=0.000803 ! Inverting map ! Added new window around map position (-95, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037752 Jy ! Component: 100 - total flux cleaned = 0.000243365 Jy ! Component: 150 - total flux cleaned = 5.14731e-05 Jy ! Component: 200 - total flux cleaned = -5.88015e-05 Jy ! Total flux subtracted in 200 components = -5.88015e-05 Jy ! Clean residual min=-0.000755 max=0.000917 Jy/beam ! Clean residual mean=0.000002 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.00905633 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.00905633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.266471Jy sigma=0.000803 ! Fit after self-cal, rms=5.266466Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.266466Jy sigma=0.000803 ! Fit after self-cal, rms=0.256334Jy sigma=0.000732 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.279 mas, bmaj=9.311 mas, bpa=2.356 degrees ! Estimated noise=105.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106489 Jy ! Component: 100 - total flux cleaned = 0.00150308 Jy ! Component: 150 - total flux cleaned = 0.00153911 Jy ! Component: 200 - total flux cleaned = 0.00150822 Jy ! Total flux subtracted in 200 components = 0.00150822 Jy ! Clean residual min=-0.000541 max=0.000637 Jy/beam ! Clean residual mean=0.000002 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.0105645 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.0105645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256288Jy sigma=0.000730 ! Fit after self-cal, rms=0.256298Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.91912e-05 Jy ! Component: 100 - total flux cleaned = -8.35597e-05 Jy ! Component: 150 - total flux cleaned = -0.000134063 Jy ! Component: 200 - total flux cleaned = -0.00018166 Jy ! Total flux subtracted in 200 components = -0.00018166 Jy ! Clean residual min=-0.000542 max=0.000608 Jy/beam ! Clean residual mean=0.000002 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0103829 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.0103829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256282Jy sigma=0.000726 ! Fit after self-cal, rms=0.256283Jy sigma=0.000726 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256283Jy sigma=0.000726 ! Fit after self-cal, rms=0.278432Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.376 mas, bmaj=14.17 mas, bpa=7.506 degrees ! Estimated noise=115.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100495 Jy ! Component: 100 - total flux cleaned = 0.00131629 Jy ! Component: 150 - total flux cleaned = 0.00124077 Jy ! Component: 200 - total flux cleaned = 0.00115288 Jy ! Total flux subtracted in 200 components = 0.00115288 Jy ! Clean residual min=-0.000597 max=0.000619 Jy/beam ! Clean residual mean=0.000002 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0115358 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 114 components and 0.0115358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278404Jy sigma=0.000721 ! Fit after self-cal, rms=0.278415Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121992 Jy ! Component: 100 - total flux cleaned = -0.000229978 Jy ! Component: 150 - total flux cleaned = -0.000330775 Jy ! Component: 200 - total flux cleaned = -0.00040829 Jy ! Total flux subtracted in 200 components = -0.00040829 Jy ! Clean residual min=-0.000606 max=0.000621 Jy/beam ! Clean residual mean=0.000002 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0111275 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 124 components and 0.0111275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278403Jy sigma=0.000721 ! Fit after self-cal, rms=0.278401Jy sigma=0.000721 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.166 mas, bmaj=9.075 mas, bpa=2.34 degrees ! Estimated noise=110.534 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.166 x 9.075 at 2.34 degrees (North through East) ! Clean map min=-0.0013166 max=0.017216 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=7.986 mas, bpa=1.171 degrees ! Estimated noise=177.766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135264 Jy ! Component: 100 - total flux cleaned = 0.0154959 Jy ! Component: 150 - total flux cleaned = 0.0154256 Jy ! Component: 200 - total flux cleaned = 0.0151064 Jy ! Total flux subtracted in 200 components = 0.0151064 Jy ! Clean residual min=-0.000869 max=0.001035 Jy/beam ! Clean residual mean=0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0151064 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0151064 Jy ! Inverting map and beam ! Estimated beam: bmin=4.166 mas, bmaj=9.075 mas, bpa=2.34 degrees ! Estimated noise=110.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000723845 Jy ! Component: 100 - total flux cleaned = -0.00109719 Jy ! Component: 150 - total flux cleaned = -0.00133486 Jy ! Component: 200 - total flux cleaned = -0.00153184 Jy ! Total flux subtracted in 200 components = -0.00153184 Jy ! Clean residual min=-0.000609 max=0.000686 Jy/beam ! Clean residual mean=0.000002 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0135745 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 43 components and 0.0135745 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.376 mas, bmaj=14.17 mas, bpa=7.506 degrees ! Estimated noise=115.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605111 Jy ! Component: 100 - total flux cleaned = -0.00108164 Jy ! Component: 150 - total flux cleaned = -0.00135917 Jy ! Component: 200 - total flux cleaned = -0.00159008 Jy ! Total flux subtracted in 200 components = -0.00159008 Jy ! Clean residual min=-0.000691 max=0.000645 Jy/beam ! Clean residual mean=0.000002 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0119845 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216826 Jy ! Component: 100 - total flux cleaned = -0.000354557 Jy ! Component: 150 - total flux cleaned = -0.000471913 Jy ! Component: 200 - total flux cleaned = -0.000572662 Jy ! Total flux subtracted in 200 components = -0.000572662 Jy ! Clean residual min=-0.000663 max=0.000613 Jy/beam ! Clean residual mean=0.000001 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.0114118 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 72 components and 0.0114118 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.166 mas, bmaj=9.075 mas, bpa=2.34 degrees ! Estimated noise=110.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267889 Jy ! Component: 100 - total flux cleaned = 0.000189877 Jy ! Component: 150 - total flux cleaned = 0.000103802 Jy ! Component: 200 - total flux cleaned = 3.7186e-05 Jy ! Total flux subtracted in 200 components = 3.7186e-05 Jy ! Clean residual min=-0.000572 max=0.000609 Jy/beam ! Clean residual mean=0.000001 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.011449 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.011449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278438Jy sigma=0.000722 ! Fit after self-cal, rms=0.278447Jy sigma=0.000722 wmodel J1559-0531_S_2017_05_01_pus_map.mod ! Writing 92 model components to file: J1559-0531_S_2017_05_01_pus_map.mod wobs J1559-0531_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1559-0531_S_2017_05_01_pus_uvs.fits wwins J1559-0531_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J1559-0531_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169047 Jy ! Component: 100 - total flux cleaned = 0.000266562 Jy ! Component: 150 - total flux cleaned = 0.000331193 Jy ! Component: 200 - total flux cleaned = 0.000393611 Jy ! Component: 250 - total flux cleaned = 0.00045398 Jy ! Component: 300 - total flux cleaned = 0.000504187 Jy ! Component: 350 - total flux cleaned = 0.00054517 Jy ! Component: 400 - total flux cleaned = 0.000585101 Jy ! Component: 450 - total flux cleaned = 0.000632121 Jy ! Component: 500 - total flux cleaned = 0.000670656 Jy ! Component: 550 - total flux cleaned = 0.000708544 Jy ! Component: 600 - total flux cleaned = 0.000760836 Jy ! Component: 650 - total flux cleaned = 0.000812198 Jy ! Component: 700 - total flux cleaned = 0.000848352 Jy ! Component: 750 - total flux cleaned = 0.000891099 Jy ! Component: 800 - total flux cleaned = 0.000926335 Jy ! Component: 850 - total flux cleaned = 0.000988511 Jy ! Component: 900 - total flux cleaned = 0.00102251 Jy ! Component: 950 - total flux cleaned = 0.00108299 Jy ! Component: 1000 - total flux cleaned = 0.00111616 Jy ! Component: 1050 - total flux cleaned = 0.00115553 Jy ! Component: 1100 - total flux cleaned = 0.00120725 Jy ! Component: 1150 - total flux cleaned = 0.00123919 Jy ! Component: 1200 - total flux cleaned = 0.00128341 Jy ! Component: 1250 - total flux cleaned = 0.00130836 Jy ! Component: 1300 - total flux cleaned = 0.00134556 Jy ! Component: 1350 - total flux cleaned = 0.00137615 Jy ! Component: 1400 - total flux cleaned = 0.00140031 Jy ! Component: 1450 - total flux cleaned = 0.00142433 Jy ! Component: 1500 - total flux cleaned = 0.00145414 Jy ! Component: 1550 - total flux cleaned = 0.0015012 Jy ! Component: 1600 - total flux cleaned = 0.00151877 Jy ! Component: 1650 - total flux cleaned = 0.00155933 Jy ! Component: 1700 - total flux cleaned = 0.00159377 Jy ! Component: 1750 - total flux cleaned = 0.00164496 Jy ! Component: 1800 - total flux cleaned = 0.0016901 Jy ! Component: 1850 - total flux cleaned = 0.00172368 Jy ! Component: 1900 - total flux cleaned = 0.00178481 Jy ! Component: 1950 - total flux cleaned = 0.00179578 Jy ! Component: 2000 - total flux cleaned = 0.00185612 Jy ! Component: 2050 - total flux cleaned = 0.00189416 Jy ! Component: 2100 - total flux cleaned = 0.00192112 Jy ! Component: 2150 - total flux cleaned = 0.00195866 Jy ! Component: 2200 - total flux cleaned = 0.00199051 Jy ! Component: 2250 - total flux cleaned = 0.00202221 Jy ! Component: 2300 - total flux cleaned = 0.00205894 Jy ! Component: 2350 - total flux cleaned = 0.00209017 Jy ! Component: 2400 - total flux cleaned = 0.00211089 Jy ! Component: 2450 - total flux cleaned = 0.00212126 Jy ! Component: 2500 - total flux cleaned = 0.0021826 Jy ! Component: 2550 - total flux cleaned = 0.00220285 Jy ! Component: 2600 - total flux cleaned = 0.00223815 Jy ! Component: 2650 - total flux cleaned = 0.00227318 Jy ! Component: 2700 - total flux cleaned = 0.00229809 Jy ! Component: 2750 - total flux cleaned = 0.0023427 Jy ! Component: 2800 - total flux cleaned = 0.00235747 Jy ! Component: 2850 - total flux cleaned = 0.00238683 Jy ! Component: 2900 - total flux cleaned = 0.00241603 Jy ! Component: 2950 - total flux cleaned = 0.00245961 Jy ! Component: 3000 - total flux cleaned = 0.00247401 Jy ! Component: 3050 - total flux cleaned = 0.00249794 Jy ! Component: 3100 - total flux cleaned = 0.00253601 Jy ! Component: 3150 - total flux cleaned = 0.00256439 Jy ! Component: 3200 - total flux cleaned = 0.0025973 Jy ! Component: 3250 - total flux cleaned = 0.00262542 Jy ! Component: 3300 - total flux cleaned = 0.00265801 Jy ! Component: 3350 - total flux cleaned = 0.00268577 Jy ! Component: 3400 - total flux cleaned = 0.0027134 Jy ! Component: 3450 - total flux cleaned = 0.00272257 Jy ! Component: 3500 - total flux cleaned = 0.00275907 Jy ! Component: 3550 - total flux cleaned = 0.00279531 Jy ! Component: 3600 - total flux cleaned = 0.00281336 Jy ! Component: 3650 - total flux cleaned = 0.00285374 Jy ! Component: 3700 - total flux cleaned = 0.00286268 Jy ! Component: 3750 - total flux cleaned = 0.00288488 Jy ! Component: 3800 - total flux cleaned = 0.00291145 Jy ! Component: 3850 - total flux cleaned = 0.00292906 Jy ! Component: 3900 - total flux cleaned = 0.00296849 Jy ! Component: 3950 - total flux cleaned = 0.00299462 Jy ! Component: 4000 - total flux cleaned = 0.00301195 Jy ! Component: 4050 - total flux cleaned = 0.00304215 Jy ! Total flux subtracted in 4096 components = 0.00305502 Jy ! Clean residual min=-0.000220 max=0.000232 Jy/beam ! Clean residual mean=0.000001 rms=0.000084 Jy/beam ! Combined flux in latest and established models = 0.014504 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 382 components and 0.014504 Jy ![Exited script file: muppet] wmap "J1559-0531_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.166 x 9.075 at 2.34 degrees (North through East) ! Clean map min=-0.00085906 max=0.017489 Jy/beam ! Writing clean map to FITS file: J1559-0531_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0174888 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.36278e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.43454 1.43454 2.86907 5.73814 11.4763 22.9526 45.9051 91.8103 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.017 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.166 x 9.075 at 2.34 degrees (North through East) ! Clean map min=-0.00085906 max=0.017489 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1559-0531_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:39:44 2019