! Started logfile: J1559+0304_S_2017_05_01_pus_uvs.log on Wed May 1 18:39:35 2019 obs J1559+0304_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1559+0304_S_2017_05_01_pus_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.693333 visibilities/baseline/integration-bin. ! Found source: J1559+0304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 4368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1559+0304_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.483988Jy sigma=0.045712 ! Fit after self-cal, rms=0.477689Jy sigma=0.045340 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=7.339 mas, bpa=-4.159 degrees ! Estimated noise=1298.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.272508 Jy ! Component: 100 - total flux cleaned = 0.325677 Jy ! Total flux subtracted in 100 components = 0.325677 Jy ! Clean residual min=-0.099316 max=0.110818 Jy/beam ! Clean residual mean=0.001058 rms=0.031627 Jy/beam ! Combined flux in latest and established models = 0.325677 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.325677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254864Jy sigma=0.014614 ! Fit after self-cal, rms=0.254832Jy sigma=0.014614 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=8.612 mas, bpa=1.783 degrees ! Estimated noise=902.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0331584 Jy ! Component: 100 - total flux cleaned = -0.0394436 Jy ! Component: 150 - total flux cleaned = -0.0442227 Jy ! Component: 200 - total flux cleaned = -0.048531 Jy ! Total flux subtracted in 200 components = -0.048531 Jy ! Clean residual min=-0.106258 max=0.116087 Jy/beam ! Clean residual mean=0.001843 rms=0.031975 Jy/beam ! Combined flux in latest and established models = 0.277146 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.277146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261404Jy sigma=0.013491 ! Fit after self-cal, rms=0.261341Jy sigma=0.013490 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.63 HN 0.93 KP 0.73 ! LA 0.69 MK 0.84 NL 0.73 OV 0.74 ! PT 0.71 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.65 HN 0.99 KP 0.71 ! LA 0.66 MK 0.82 NL 0.79 OV 0.75 ! PT 0.68 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.69 HN 0.94 KP 0.71 ! LA 0.68 MK 0.87 NL 0.78 OV 0.69 ! PT 0.68 SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.76 HN 0.92 KP 1.00* ! LA 47.49 MK 1.10 NL 1.00* OV 1.00* ! PT 0.70 SC 1.00* ! ! ! Fit before self-cal, rms=0.261341Jy sigma=0.013490 ! Fit after self-cal, rms=0.071162Jy sigma=0.000754 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=8.383 mas, bpa=4.661 degrees ! Estimated noise=889.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00938791 Jy ! Component: 100 - total flux cleaned = 0.0109714 Jy ! Component: 150 - total flux cleaned = 0.0105321 Jy ! Component: 200 - total flux cleaned = 0.0104052 Jy ! Total flux subtracted in 200 components = 0.0104052 Jy ! Clean residual min=-0.005178 max=0.005276 Jy/beam ! Clean residual mean=0.000003 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.287551 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.287551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069415Jy sigma=0.000735 ! Fit after self-cal, rms=0.066766Jy sigma=0.000717 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066766Jy sigma=0.000717 ! Fit after self-cal, rms=0.061848Jy sigma=0.000688 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=8.327 mas, bpa=4.531 degrees ! Estimated noise=890.327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486705 Jy ! Component: 100 - total flux cleaned = 0.00633471 Jy ! Component: 150 - total flux cleaned = 0.00643663 Jy ! Component: 200 - total flux cleaned = 0.00643637 Jy ! Total flux subtracted in 200 components = 0.00643637 Jy ! Clean residual min=-0.004185 max=0.003978 Jy/beam ! Clean residual mean=0.000002 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.293988 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 51 components and 0.293988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061243Jy sigma=0.000681 ! Fit after self-cal, rms=0.061188Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146377 Jy ! Component: 100 - total flux cleaned = 0.000229134 Jy ! Component: 150 - total flux cleaned = 0.000153112 Jy ! Component: 200 - total flux cleaned = 0.000223856 Jy ! Total flux subtracted in 200 components = 0.000223856 Jy ! Clean residual min=-0.004043 max=0.003450 Jy/beam ! Clean residual mean=0.000002 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.294212 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.294212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060945Jy sigma=0.000678 ! Fit after self-cal, rms=0.060936Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060936Jy sigma=0.000678 ! Fit after self-cal, rms=0.059688Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.894 mas, bmaj=8.3 mas, bpa=4.403 degrees ! Estimated noise=891.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307345 Jy ! Component: 100 - total flux cleaned = 0.00355345 Jy ! Component: 150 - total flux cleaned = 0.00369255 Jy ! Component: 200 - total flux cleaned = 0.00382326 Jy ! Total flux subtracted in 200 components = 0.00382326 Jy ! Clean residual min=-0.003517 max=0.003265 Jy/beam ! Clean residual mean=0.000003 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.298035 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 71 components and 0.298035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059423Jy sigma=0.000666 ! Fit after self-cal, rms=0.059400Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229256 Jy ! Component: 100 - total flux cleaned = 0.000227775 Jy ! Component: 150 - total flux cleaned = 0.00022717 Jy ! Component: 200 - total flux cleaned = 0.000278553 Jy ! Total flux subtracted in 200 components = 0.000278553 Jy ! Clean residual min=-0.003408 max=0.003000 Jy/beam ! Clean residual mean=0.000003 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.298313 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.298313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059283Jy sigma=0.000664 ! Fit after self-cal, rms=0.059280Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059280Jy sigma=0.000664 ! Fit after self-cal, rms=0.058916Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.702 mas, bmaj=12.45 mas, bpa=8.561 degrees ! Estimated noise=978.033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223144 Jy ! Component: 100 - total flux cleaned = 0.00267625 Jy ! Component: 150 - total flux cleaned = 0.00283581 Jy ! Component: 200 - total flux cleaned = 0.0030718 Jy ! Total flux subtracted in 200 components = 0.0030718 Jy ! Clean residual min=-0.002508 max=0.002752 Jy/beam ! Clean residual mean=0.000005 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.301385 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.301385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058864Jy sigma=0.000662 ! Fit after self-cal, rms=0.058839Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184571 Jy ! Component: 100 - total flux cleaned = -3.5827e-05 Jy ! Component: 150 - total flux cleaned = 6.63749e-05 Jy ! Component: 200 - total flux cleaned = 0.000133284 Jy ! Total flux subtracted in 200 components = 0.000133284 Jy ! Clean residual min=-0.002476 max=0.002664 Jy/beam ! Clean residual mean=0.000005 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.301518 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.301518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058837Jy sigma=0.000662 ! Fit after self-cal, rms=0.058831Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=8.279 mas, bpa=4.32 degrees ! Estimated noise=892.003 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 8.279 at 4.32 degrees (North through East) ! Clean map min=-0.0036928 max=0.33054 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=7.187 mas, bpa=0.2752 degrees ! Estimated noise=1209.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254588 Jy ! Component: 100 - total flux cleaned = 0.310105 Jy ! Component: 150 - total flux cleaned = 0.310979 Jy ! Component: 200 - total flux cleaned = 0.310482 Jy ! Total flux subtracted in 200 components = 0.310482 Jy ! Clean residual min=-0.006090 max=0.005920 Jy/beam ! Clean residual mean=0.000006 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.310482 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.310482 Jy ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=8.279 mas, bpa=4.32 degrees ! Estimated noise=892.003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00489993 Jy ! Component: 100 - total flux cleaned = -0.00589434 Jy ! Component: 150 - total flux cleaned = -0.00639855 Jy ! Component: 200 - total flux cleaned = -0.00654136 Jy ! Total flux subtracted in 200 components = -0.00654136 Jy ! Clean residual min=-0.003353 max=0.004126 Jy/beam ! Clean residual mean=0.000005 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.30394 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.30394 Jy ! Inverting map ! Added new window around map position (5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215801 Jy ! Component: 100 - total flux cleaned = 0.00179694 Jy ! Component: 150 - total flux cleaned = 0.00157497 Jy ! Component: 200 - total flux cleaned = 0.00136765 Jy ! Total flux subtracted in 200 components = 0.00136765 Jy ! Clean residual min=-0.003173 max=0.003480 Jy/beam ! Clean residual mean=0.000005 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.305308 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.305308 Jy ! Inverting map ! Added new window around map position (-32.5, 44.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149264 Jy ! Component: 100 - total flux cleaned = 0.00120318 Jy ! Component: 150 - total flux cleaned = 0.000935263 Jy ! Component: 200 - total flux cleaned = 0.000768408 Jy ! Total flux subtracted in 200 components = 0.000768408 Jy ! Clean residual min=-0.003052 max=0.002846 Jy/beam ! Clean residual mean=0.000005 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.306076 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.306076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.702 mas, bmaj=12.45 mas, bpa=8.561 degrees ! Estimated noise=978.033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00087774 Jy ! Component: 100 - total flux cleaned = -0.00151105 Jy ! Component: 150 - total flux cleaned = -0.00205434 Jy ! Component: 200 - total flux cleaned = -0.0026243 Jy ! Total flux subtracted in 200 components = -0.0026243 Jy ! Clean residual min=-0.002484 max=0.002551 Jy/beam ! Clean residual mean=0.000007 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.303452 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000377392 Jy ! Component: 100 - total flux cleaned = -0.000712068 Jy ! Component: 150 - total flux cleaned = -0.00094703 Jy ! Component: 200 - total flux cleaned = -0.0011622 Jy ! Total flux subtracted in 200 components = -0.0011622 Jy ! Clean residual min=-0.002433 max=0.002580 Jy/beam ! Clean residual mean=0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.30229 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 83 components and 0.30229 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=8.279 mas, bpa=4.32 degrees ! Estimated noise=892.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576605 Jy ! Component: 100 - total flux cleaned = 0.00065148 Jy ! Component: 150 - total flux cleaned = 0.000719085 Jy ! Component: 200 - total flux cleaned = 0.00071838 Jy ! Total flux subtracted in 200 components = 0.00071838 Jy ! Clean residual min=-0.003013 max=0.002507 Jy/beam ! Clean residual mean=0.000004 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.303008 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.303008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059025Jy sigma=0.000662 ! Fit after self-cal, rms=0.058999Jy sigma=0.000661 wmodel J1559+0304_S_2017_05_01_pus_map.mod ! Writing 93 model components to file: J1559+0304_S_2017_05_01_pus_map.mod wobs J1559+0304_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1559+0304_S_2017_05_01_pus_uvs.fits wwins J1559+0304_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1559+0304_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101949 Jy ! Component: 100 - total flux cleaned = -0.000973688 Jy ! Component: 150 - total flux cleaned = -0.00101399 Jy ! Component: 200 - total flux cleaned = -0.0011396 Jy ! Component: 250 - total flux cleaned = -0.00122146 Jy ! Component: 300 - total flux cleaned = -0.00145766 Jy ! Component: 350 - total flux cleaned = -0.0014574 Jy ! Component: 400 - total flux cleaned = -0.0015706 Jy ! Component: 450 - total flux cleaned = -0.00142392 Jy ! Component: 500 - total flux cleaned = -0.00149688 Jy ! Component: 550 - total flux cleaned = -0.00146088 Jy ! Component: 600 - total flux cleaned = -0.00135589 Jy ! Component: 650 - total flux cleaned = -0.00128726 Jy ! Component: 700 - total flux cleaned = -0.00125363 Jy ! Component: 750 - total flux cleaned = -0.00112068 Jy ! Component: 800 - total flux cleaned = -0.00112103 Jy ! Component: 850 - total flux cleaned = -0.0011211 Jy ! Component: 900 - total flux cleaned = -0.00112077 Jy ! Component: 950 - total flux cleaned = -0.00112078 Jy ! Component: 1000 - total flux cleaned = -0.00105865 Jy ! Component: 1050 - total flux cleaned = -0.000967441 Jy ! Component: 1100 - total flux cleaned = -0.000967251 Jy ! Component: 1150 - total flux cleaned = -0.00102677 Jy ! Component: 1200 - total flux cleaned = -0.000879843 Jy ! Component: 1250 - total flux cleaned = -0.000938413 Jy ! Component: 1300 - total flux cleaned = -0.000909848 Jy ! Component: 1350 - total flux cleaned = -0.000938389 Jy ! Component: 1400 - total flux cleaned = -0.000909668 Jy ! Component: 1450 - total flux cleaned = -0.000798211 Jy ! Component: 1500 - total flux cleaned = -0.000743362 Jy ! Component: 1550 - total flux cleaned = -0.000743491 Jy ! Component: 1600 - total flux cleaned = -0.000688934 Jy ! Component: 1650 - total flux cleaned = -0.000581765 Jy ! Component: 1700 - total flux cleaned = -0.000476292 Jy ! Component: 1750 - total flux cleaned = -0.000424082 Jy ! Component: 1800 - total flux cleaned = -0.000372397 Jy ! Component: 1850 - total flux cleaned = -0.00032082 Jy ! Component: 1900 - total flux cleaned = -0.000218682 Jy ! Component: 1950 - total flux cleaned = -9.30275e-05 Jy ! Component: 2000 - total flux cleaned = -0.000117663 Jy ! Component: 2050 - total flux cleaned = -4.36146e-05 Jy ! Component: 2100 - total flux cleaned = 2.99947e-05 Jy ! Component: 2150 - total flux cleaned = 5.40542e-05 Jy ! Component: 2200 - total flux cleaned = 0.000174369 Jy ! Component: 2250 - total flux cleaned = 0.00026982 Jy ! Component: 2300 - total flux cleaned = 0.000293547 Jy ! Component: 2350 - total flux cleaned = 0.000387403 Jy ! Component: 2400 - total flux cleaned = 0.000503671 Jy ! Component: 2450 - total flux cleaned = 0.000457504 Jy ! Component: 2500 - total flux cleaned = 0.000480717 Jy ! Component: 2550 - total flux cleaned = 0.000617134 Jy ! Component: 2600 - total flux cleaned = 0.000684687 Jy ! Component: 2650 - total flux cleaned = 0.000774444 Jy ! Component: 2700 - total flux cleaned = 0.000796661 Jy ! Component: 2750 - total flux cleaned = 0.000928688 Jy ! Component: 2800 - total flux cleaned = 0.000884833 Jy ! Component: 2850 - total flux cleaned = 0.000993721 Jy ! Component: 2900 - total flux cleaned = 0.00101509 Jy ! Component: 2950 - total flux cleaned = 0.00103631 Jy ! Component: 3000 - total flux cleaned = 0.00112151 Jy ! Component: 3050 - total flux cleaned = 0.00120597 Jy ! Component: 3100 - total flux cleaned = 0.00128991 Jy ! Component: 3150 - total flux cleaned = 0.00143553 Jy ! Component: 3200 - total flux cleaned = 0.00149727 Jy ! Component: 3250 - total flux cleaned = 0.00155882 Jy ! Component: 3300 - total flux cleaned = 0.00168139 Jy ! Component: 3350 - total flux cleaned = 0.00170161 Jy ! Component: 3400 - total flux cleaned = 0.00184279 Jy ! Component: 3450 - total flux cleaned = 0.00194272 Jy ! Component: 3500 - total flux cleaned = 0.00204217 Jy ! Component: 3550 - total flux cleaned = 0.00212118 Jy ! Component: 3600 - total flux cleaned = 0.00221917 Jy ! Component: 3650 - total flux cleaned = 0.00214118 Jy ! Component: 3700 - total flux cleaned = 0.00231563 Jy ! Component: 3750 - total flux cleaned = 0.00227724 Jy ! Component: 3800 - total flux cleaned = 0.00241147 Jy ! Component: 3850 - total flux cleaned = 0.00237336 Jy ! Component: 3900 - total flux cleaned = 0.00248706 Jy ! Component: 3950 - total flux cleaned = 0.00254338 Jy ! Component: 4000 - total flux cleaned = 0.00265569 Jy ! Component: 4050 - total flux cleaned = 0.00261816 Jy ! Total flux subtracted in 4096 components = 0.00263669 Jy ! Clean residual min=-0.001284 max=0.001050 Jy/beam ! Clean residual mean=0.000003 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.305645 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 377 components and 0.305645 Jy ![Exited script file: muppet] wmap "J1559+0304_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 8.279 at 4.32 degrees (North through East) ! Clean map min=-0.0037533 max=0.32599 Jy/beam ! Writing clean map to FITS file: J1559+0304_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.325995 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000346561 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.318926 0.318926 0.637852 1.2757 2.55141 5.10282 10.2056 20.4113 40.8225 81.6451 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.325 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 8.279 at 4.32 degrees (North through East) ! Clean map min=-0.0037533 max=0.32599 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1559+0304_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:39:40 2019