! Started logfile: J1559+0304_S_2017_01_21_pus_uvs.log on Sun May 5 15:58:09 2019 obs J1559+0304_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1559+0304_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.385417 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1559+0304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1559+0304_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.691599Jy sigma=0.004031 ! Fit after self-cal, rms=0.684576Jy sigma=0.004002 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.33 mas, bmaj=10 mas, bpa=-38.93 degrees ! Estimated noise=7627.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28695 Jy ! Component: 100 - total flux cleaned = 0.387613 Jy ! Total flux subtracted in 100 components = 0.387613 Jy ! Clean residual min=-0.030830 max=0.041881 Jy/beam ! Clean residual mean=-0.001112 rms=0.010343 Jy/beam ! Combined flux in latest and established models = 0.387613 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.387613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152189Jy sigma=0.000762 ! Fit after self-cal, rms=0.151972Jy sigma=0.000760 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.885 mas, bmaj=10.43 mas, bpa=-38.67 degrees ! Estimated noise=6783.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216266 Jy ! Component: 100 - total flux cleaned = 0.0144488 Jy ! Component: 150 - total flux cleaned = 0.00643368 Jy ! Component: 200 - total flux cleaned = -0.00465932 Jy ! Total flux subtracted in 200 components = -0.00465932 Jy ! Clean residual min=-0.010091 max=0.010118 Jy/beam ! Clean residual mean=-0.000907 rms=0.004063 Jy/beam ! Combined flux in latest and established models = 0.382953 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 73 components and 0.382953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137093Jy sigma=0.000657 ! Fit after self-cal, rms=0.137001Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* LA 0.99 ! MK 0.90 NL 1.00* OV 1.05 PT 1.02 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00* LA 0.99 ! MK 1.05 NL 0.86 OV 1.13 PT 0.93 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* LA 1.02 ! MK 0.99 NL 1.19 OV 0.84 PT 0.98 ! SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.00* LA 0.89 ! MK 0.84 NL 1.00* OV 1.00* PT 0.98 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.137001Jy sigma=0.000656 ! Fit after self-cal, rms=0.129311Jy sigma=0.000623 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.802 mas, bmaj=10.6 mas, bpa=-38.64 degrees ! Estimated noise=6690.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00531167 Jy ! Component: 100 - total flux cleaned = 0.00730455 Jy ! Component: 150 - total flux cleaned = 0.00876352 Jy ! Component: 200 - total flux cleaned = 0.00984302 Jy ! Total flux subtracted in 200 components = 0.00984302 Jy ! Clean residual min=-0.003421 max=0.003416 Jy/beam ! Clean residual mean=-0.000072 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.392796 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 117 components and 0.392797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128122Jy sigma=0.000616 ! Fit after self-cal, rms=0.128351Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128351Jy sigma=0.000616 ! Fit after self-cal, rms=0.126848Jy sigma=0.000615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.806 mas, bmaj=10.58 mas, bpa=-38.67 degrees ! Estimated noise=6655.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000933902 Jy ! Component: 100 - total flux cleaned = 0.00105462 Jy ! Component: 150 - total flux cleaned = 0.00228144 Jy ! Component: 200 - total flux cleaned = 0.0033993 Jy ! Total flux subtracted in 200 components = 0.0033993 Jy ! Clean residual min=-0.002562 max=0.002556 Jy/beam ! Clean residual mean=-0.000026 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.396196 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 155 components and 0.396196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126230Jy sigma=0.000612 ! Fit after self-cal, rms=0.126233Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606716 Jy ! Component: 100 - total flux cleaned = 0.0014705 Jy ! Component: 150 - total flux cleaned = 0.00240417 Jy ! Component: 200 - total flux cleaned = 0.00302534 Jy ! Total flux subtracted in 200 components = 0.00302534 Jy ! Clean residual min=-0.002005 max=0.001997 Jy/beam ! Clean residual mean=-0.000011 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.399221 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 185 components and 0.399221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125902Jy sigma=0.000610 ! Fit after self-cal, rms=0.125905Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125905Jy sigma=0.000610 ! Fit after self-cal, rms=0.125125Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.805 mas, bmaj=10.57 mas, bpa=-38.7 degrees ! Estimated noise=6633.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220584 Jy ! Component: 100 - total flux cleaned = -0.00196636 Jy ! Component: 150 - total flux cleaned = -0.00173328 Jy ! Component: 200 - total flux cleaned = -0.00183797 Jy ! Total flux subtracted in 200 components = -0.00183797 Jy ! Clean residual min=-0.001704 max=0.001729 Jy/beam ! Clean residual mean=0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.397383 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 205 components and 0.397383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124842Jy sigma=0.000608 ! Fit after self-cal, rms=0.124868Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018071 Jy ! Component: 100 - total flux cleaned = 0.000380035 Jy ! Component: 150 - total flux cleaned = 0.000755196 Jy ! Component: 200 - total flux cleaned = 0.00110338 Jy ! Total flux subtracted in 200 components = 0.00110338 Jy ! Clean residual min=-0.001426 max=0.001429 Jy/beam ! Clean residual mean=0.000007 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.398487 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 232 components and 0.398487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124700Jy sigma=0.000607 ! Fit after self-cal, rms=0.124710Jy sigma=0.000607 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124710Jy sigma=0.000607 ! Fit after self-cal, rms=0.124131Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=10.71 mas, bpa=-28.8 degrees ! Estimated noise=7949.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000821628 Jy ! Component: 100 - total flux cleaned = -0.000718887 Jy ! Component: 150 - total flux cleaned = -0.000890661 Jy ! Component: 200 - total flux cleaned = -0.00139863 Jy ! Total flux subtracted in 200 components = -0.00139863 Jy ! Clean residual min=-0.001395 max=0.001385 Jy/beam ! Clean residual mean=-0.000017 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.397088 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 271 components and 0.397088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123976Jy sigma=0.000606 ! Fit after self-cal, rms=0.123998Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128147 Jy ! Component: 100 - total flux cleaned = 0.0019288 Jy ! Component: 150 - total flux cleaned = 0.00177333 Jy ! Component: 200 - total flux cleaned = 0.00200146 Jy ! Total flux subtracted in 200 components = 0.00200146 Jy ! Clean residual min=-0.001271 max=0.001259 Jy/beam ! Clean residual mean=0.000000 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.399089 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 327 components and 0.399089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123892Jy sigma=0.000605 ! Fit after self-cal, rms=0.123912Jy sigma=0.000605 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.805 mas, bmaj=10.57 mas, bpa=-38.73 degrees ! Estimated noise=6620.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.805 x 10.57 at -38.73 degrees (North through East) ! Clean map min=-0.010137 max=0.20885 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.273 mas, bmaj=10.09 mas, bpa=-38.86 degrees ! Estimated noise=7333.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.272921 Jy ! Component: 100 - total flux cleaned = 0.367931 Jy ! Component: 150 - total flux cleaned = 0.398122 Jy ! Component: 200 - total flux cleaned = 0.391865 Jy ! Total flux subtracted in 200 components = 0.391865 Jy ! Clean residual min=-0.013581 max=0.013366 Jy/beam ! Clean residual mean=-0.000654 rms=0.004628 Jy/beam ! Combined flux in latest and established models = 0.391865 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.391865 Jy ! Inverting map and beam ! Estimated beam: bmin=4.805 mas, bmaj=10.57 mas, bpa=-38.73 degrees ! Estimated noise=6620.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00324181 Jy ! Component: 100 - total flux cleaned = -0.00891273 Jy ! Component: 150 - total flux cleaned = -0.014599 Jy ! Component: 200 - total flux cleaned = -0.0214254 Jy ! Total flux subtracted in 200 components = -0.0214254 Jy ! Clean residual min=-0.006584 max=0.006495 Jy/beam ! Clean residual mean=-0.000504 rms=0.002504 Jy/beam ! Combined flux in latest and established models = 0.370439 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 96 components and 0.370439 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.313 mas, bmaj=10.71 mas, bpa=-28.8 degrees ! Estimated noise=7949.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0045313 Jy ! Component: 100 - total flux cleaned = -0.00980033 Jy ! Component: 150 - total flux cleaned = -0.0138143 Jy ! Component: 200 - total flux cleaned = -0.0179867 Jy ! Total flux subtracted in 200 components = -0.0179867 Jy ! Clean residual min=-0.003171 max=0.003118 Jy/beam ! Clean residual mean=-0.000182 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.352452 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00334872 Jy ! Component: 100 - total flux cleaned = -0.00500515 Jy ! Component: 150 - total flux cleaned = -0.00670266 Jy ! Component: 200 - total flux cleaned = -0.00787826 Jy ! Total flux subtracted in 200 components = -0.00787826 Jy ! Clean residual min=-0.003349 max=0.003360 Jy/beam ! Clean residual mean=-0.000102 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.344574 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 186 components and 0.344574 Jy ! Inverting map ! Added new window around map position (-103, 58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269804 Jy ! Component: 100 - total flux cleaned = 0.00311134 Jy ! Component: 150 - total flux cleaned = 0.00330329 Jy ! Component: 200 - total flux cleaned = 0.00335874 Jy ! Total flux subtracted in 200 components = 0.00335874 Jy ! Clean residual min=-0.002681 max=0.004080 Jy/beam ! Clean residual mean=0.000049 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.347933 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 211 components and 0.347933 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.805 mas, bmaj=10.57 mas, bpa=-38.73 degrees ! Estimated noise=6620.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.56849e-05 Jy ! Component: 100 - total flux cleaned = 0.000175584 Jy ! Component: 150 - total flux cleaned = 0.000217014 Jy ! Component: 200 - total flux cleaned = 0.00025735 Jy ! Total flux subtracted in 200 components = 0.00025735 Jy ! Clean residual min=-0.004732 max=0.005196 Jy/beam ! Clean residual mean=0.000021 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.34819 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 235 components and 0.34819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124816Jy sigma=0.000612 ! Fit after self-cal, rms=0.124706Jy sigma=0.000611 wmodel J1559+0304_S_2017_01_21_pus_map.mod ! Writing 235 model components to file: J1559+0304_S_2017_01_21_pus_map.mod wobs J1559+0304_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1559+0304_S_2017_01_21_pus_uvs.fits wwins J1559+0304_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1559+0304_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756308 Jy ! Component: 100 - total flux cleaned = 0.00110722 Jy ! Component: 150 - total flux cleaned = 0.00141282 Jy ! Component: 200 - total flux cleaned = 0.00158642 Jy ! Component: 250 - total flux cleaned = 0.00180413 Jy ! Component: 300 - total flux cleaned = 0.00201287 Jy ! Component: 350 - total flux cleaned = 0.00226479 Jy ! Component: 400 - total flux cleaned = 0.00245969 Jy ! Component: 450 - total flux cleaned = 0.0026011 Jy ! Component: 500 - total flux cleaned = 0.00264773 Jy ! Component: 550 - total flux cleaned = 0.00269338 Jy ! Component: 600 - total flux cleaned = 0.00273763 Jy ! Component: 650 - total flux cleaned = 0.00278115 Jy ! Component: 700 - total flux cleaned = 0.00286596 Jy ! Component: 750 - total flux cleaned = 0.00282457 Jy ! Component: 800 - total flux cleaned = 0.00266175 Jy ! Component: 850 - total flux cleaned = 0.00254197 Jy ! Component: 900 - total flux cleaned = 0.00250342 Jy ! Component: 950 - total flux cleaned = 0.00258091 Jy ! Component: 1000 - total flux cleaned = 0.002504 Jy ! Component: 1050 - total flux cleaned = 0.00250323 Jy ! Component: 1100 - total flux cleaned = 0.00242775 Jy ! Component: 1150 - total flux cleaned = 0.00231634 Jy ! Component: 1200 - total flux cleaned = 0.00224317 Jy ! Component: 1250 - total flux cleaned = 0.00227876 Jy ! Component: 1300 - total flux cleaned = 0.00227809 Jy ! Component: 1350 - total flux cleaned = 0.00217056 Jy ! Component: 1400 - total flux cleaned = 0.00213469 Jy ! Component: 1450 - total flux cleaned = 0.00216969 Jy ! Component: 1500 - total flux cleaned = 0.00213487 Jy ! Component: 1550 - total flux cleaned = 0.00213489 Jy ! Component: 1600 - total flux cleaned = 0.00220409 Jy ! Component: 1650 - total flux cleaned = 0.00220376 Jy ! Component: 1700 - total flux cleaned = 0.00213543 Jy ! Component: 1750 - total flux cleaned = 0.00213552 Jy ! Component: 1800 - total flux cleaned = 0.00216947 Jy ! Component: 1850 - total flux cleaned = 0.00203357 Jy ! Component: 1900 - total flux cleaned = 0.00199993 Jy ! Component: 1950 - total flux cleaned = 0.0019327 Jy ! Component: 2000 - total flux cleaned = 0.00189903 Jy ! Component: 2050 - total flux cleaned = 0.00183182 Jy ! Component: 2100 - total flux cleaned = 0.0019326 Jy ! Component: 2150 - total flux cleaned = 0.00203325 Jy ! Component: 2200 - total flux cleaned = 0.00220151 Jy ! Component: 2250 - total flux cleaned = 0.00223507 Jy ! Component: 2300 - total flux cleaned = 0.00237007 Jy ! Component: 2350 - total flux cleaned = 0.00240372 Jy ! Component: 2400 - total flux cleaned = 0.00253896 Jy ! Component: 2450 - total flux cleaned = 0.00270858 Jy ! Component: 2500 - total flux cleaned = 0.00277613 Jy ! Component: 2550 - total flux cleaned = 0.00291241 Jy ! Component: 2600 - total flux cleaned = 0.00308352 Jy ! Component: 2650 - total flux cleaned = 0.00329027 Jy ! Component: 2700 - total flux cleaned = 0.0033593 Jy ! Component: 2750 - total flux cleaned = 0.00353285 Jy ! Component: 2800 - total flux cleaned = 0.00363752 Jy ! Component: 2850 - total flux cleaned = 0.0037776 Jy ! Component: 2900 - total flux cleaned = 0.00391824 Jy ! Component: 2950 - total flux cleaned = 0.00409535 Jy ! Component: 3000 - total flux cleaned = 0.00427311 Jy ! Component: 3050 - total flux cleaned = 0.0045235 Jy ! Component: 3100 - total flux cleaned = 0.00481132 Jy ! Component: 3150 - total flux cleaned = 0.00506479 Jy ! Component: 3200 - total flux cleaned = 0.00532021 Jy ! Component: 3250 - total flux cleaned = 0.00554015 Jy ! Component: 3300 - total flux cleaned = 0.00587237 Jy ! Component: 3350 - total flux cleaned = 0.00620731 Jy ! Component: 3400 - total flux cleaned = 0.00654468 Jy ! Component: 3450 - total flux cleaned = 0.00680899 Jy ! Component: 3500 - total flux cleaned = 0.00715207 Jy ! Component: 3550 - total flux cleaned = 0.00726747 Jy ! Component: 3600 - total flux cleaned = 0.00746097 Jy ! Component: 3650 - total flux cleaned = 0.00765635 Jy ! Component: 3700 - total flux cleaned = 0.00785418 Jy ! Component: 3750 - total flux cleaned = 0.00809386 Jy ! Component: 3800 - total flux cleaned = 0.00825517 Jy ! Component: 3850 - total flux cleaned = 0.00841837 Jy ! Component: 3900 - total flux cleaned = 0.00858268 Jy ! Component: 3950 - total flux cleaned = 0.00878957 Jy ! Component: 4000 - total flux cleaned = 0.00899914 Jy ! Component: 4050 - total flux cleaned = 0.00916846 Jy ! Total flux subtracted in 4096 components = 0.00925365 Jy ! Clean residual min=-0.002542 max=0.002480 Jy/beam ! Clean residual mean=-0.000024 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.357444 Jy keep ! Adding 164 model components to the UV plane model. ! The established model now contains 395 components and 0.357444 Jy ![Exited script file: muppet] wmap "J1559+0304_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.805 x 10.57 at -38.73 degrees (North through East) ! Clean map min=-0.014203 max=0.20464 Jy/beam ! Writing clean map to FITS file: J1559+0304_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.204636 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000869261 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27435 1.27435 2.54871 5.09742 10.1948 20.3897 40.7793 81.5587 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.204 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.805 x 10.57 at -38.73 degrees (North through East) ! Clean map min=-0.014203 max=0.20464 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1559+0304_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:58:14 2019