! Started logfile: J1557-2724_S_2017_01_21_pus_uvs.log on Sun May 5 15:58:04 2019 obs J1557-2724_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1557-2724_S_2017_01_21_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.765601 visibilities/baseline/integration-bin. ! Found source: J1557-2724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1557-2724_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986407Jy sigma=0.005333 ! Fit after self-cal, rms=0.928058Jy sigma=0.005102 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.206 mas, bmaj=6.469 mas, bpa=-6.263 degrees ! Estimated noise=2079.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0619897 Jy ! Component: 100 - total flux cleaned = 0.0757411 Jy ! Total flux subtracted in 100 components = 0.0757411 Jy ! Clean residual min=-0.005154 max=0.006411 Jy/beam ! Clean residual mean=0.000007 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.0757411 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0757411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141321Jy sigma=0.000629 ! Fit after self-cal, rms=0.140603Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=7.017 mas, bpa=-6.143 degrees ! Estimated noise=1655.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612926 Jy ! Component: 100 - total flux cleaned = 0.00890154 Jy ! Component: 150 - total flux cleaned = 0.0102999 Jy ! Component: 200 - total flux cleaned = 0.0106773 Jy ! Total flux subtracted in 200 components = 0.0106773 Jy ! Clean residual min=-0.004742 max=0.004995 Jy/beam ! Clean residual mean=0.000024 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.0864184 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0864184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140228Jy sigma=0.000626 ! Fit after self-cal, rms=0.140185Jy sigma=0.000626 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.02 LA 1.08 ! MK 0.96 NL 1.01 OV 0.90 PT 1.09 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.00 LA 1.00 ! MK 0.99 NL 1.02 OV 1.07 PT 1.11 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.08 LA 1.00 ! MK 1.15 NL 0.92 OV 0.87 PT 1.07 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 0.95 LA 1.00* ! MK 0.84 NL 1.00* OV 0.72 PT 1.09 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.140185Jy sigma=0.000626 ! Fit after self-cal, rms=0.132446Jy sigma=0.000624 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=7.006 mas, bpa=-6.313 degrees ! Estimated noise=1649.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547894 Jy ! Component: 100 - total flux cleaned = 0.000485545 Jy ! Component: 150 - total flux cleaned = 0.000460311 Jy ! Component: 200 - total flux cleaned = 0.000439577 Jy ! Total flux subtracted in 200 components = 0.000439577 Jy ! Clean residual min=-0.004042 max=0.003787 Jy/beam ! Clean residual mean=0.000003 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.086858 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.086858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132430Jy sigma=0.000624 ! Fit after self-cal, rms=0.132007Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132007Jy sigma=0.000623 ! Fit after self-cal, rms=0.130283Jy sigma=0.000623 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=6.989 mas, bpa=-6.26 degrees ! Estimated noise=1638.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211883 Jy ! Component: 100 - total flux cleaned = 0.00021461 Jy ! Component: 150 - total flux cleaned = 0.00021499 Jy ! Component: 200 - total flux cleaned = 0.000234624 Jy ! Total flux subtracted in 200 components = 0.000234624 Jy ! Clean residual min=-0.004158 max=0.003919 Jy/beam ! Clean residual mean=0.000003 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.0870926 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0870926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130272Jy sigma=0.000623 ! Fit after self-cal, rms=0.130180Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001092 Jy ! Component: 100 - total flux cleaned = 0.00010837 Jy ! Component: 150 - total flux cleaned = 0.000107378 Jy ! Component: 200 - total flux cleaned = 8.97975e-05 Jy ! Total flux subtracted in 200 components = 8.97975e-05 Jy ! Clean residual min=-0.004268 max=0.004027 Jy/beam ! Clean residual mean=0.000004 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0871824 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0871824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130174Jy sigma=0.000623 ! Fit after self-cal, rms=0.130171Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130171Jy sigma=0.000623 ! Fit after self-cal, rms=0.129657Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.55 mas, bmaj=6.979 mas, bpa=-6.249 degrees ! Estimated noise=1634.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152011 Jy ! Component: 100 - total flux cleaned = 0.000174017 Jy ! Component: 150 - total flux cleaned = 0.000156554 Jy ! Component: 200 - total flux cleaned = 0.000172424 Jy ! Total flux subtracted in 200 components = 0.000172424 Jy ! Clean residual min=-0.004167 max=0.004082 Jy/beam ! Clean residual mean=0.000004 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0873548 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0873548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129652Jy sigma=0.000623 ! Fit after self-cal, rms=0.129628Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.24452e-05 Jy ! Component: 100 - total flux cleaned = 5.98875e-05 Jy ! Component: 150 - total flux cleaned = 5.94427e-05 Jy ! Component: 200 - total flux cleaned = 7.31057e-05 Jy ! Total flux subtracted in 200 components = 7.31057e-05 Jy ! Clean residual min=-0.004230 max=0.004090 Jy/beam ! Clean residual mean=0.000004 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.0874279 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0874279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129624Jy sigma=0.000623 ! Fit after self-cal, rms=0.129622Jy sigma=0.000623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129622Jy sigma=0.000623 ! Fit after self-cal, rms=0.129490Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.429 mas, bmaj=16.01 mas, bpa=3.369 degrees ! Estimated noise=2403.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214687 Jy ! Component: 100 - total flux cleaned = 0.000214817 Jy ! Component: 150 - total flux cleaned = 0.000228545 Jy ! Component: 200 - total flux cleaned = 0.000265988 Jy ! Total flux subtracted in 200 components = 0.000265988 Jy ! Clean residual min=-0.003188 max=0.004244 Jy/beam ! Clean residual mean=0.000015 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.0876939 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.0876939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129494Jy sigma=0.000623 ! Fit after self-cal, rms=0.129499Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10479e-06 Jy ! Component: 100 - total flux cleaned = 3.26021e-06 Jy ! Component: 150 - total flux cleaned = 4.01646e-06 Jy ! Component: 200 - total flux cleaned = -5.23874e-06 Jy ! Total flux subtracted in 200 components = -5.23874e-06 Jy ! Clean residual min=-0.003226 max=0.004242 Jy/beam ! Clean residual mean=0.000015 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.0876887 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.0876887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129504Jy sigma=0.000623 ! Fit after self-cal, rms=0.129510Jy sigma=0.000623 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=6.972 mas, bpa=-6.228 degrees ! Estimated noise=1633.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.547 x 6.972 at -6.228 degrees (North through East) ! Clean map min=-0.0042786 max=0.081352 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.215 mas, bmaj=6.406 mas, bpa=-6.174 degrees ! Estimated noise=2065.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0616089 Jy ! Component: 100 - total flux cleaned = 0.0759491 Jy ! Component: 150 - total flux cleaned = 0.08211 Jy ! Component: 200 - total flux cleaned = 0.0849346 Jy ! Total flux subtracted in 200 components = 0.0849346 Jy ! Clean residual min=-0.005465 max=0.004652 Jy/beam ! Clean residual mean=0.000001 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.0849345 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0849345 Jy ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=6.972 mas, bpa=-6.228 degrees ! Estimated noise=1633.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137068 Jy ! Component: 100 - total flux cleaned = 0.0016882 Jy ! Component: 150 - total flux cleaned = 0.00193759 Jy ! Component: 200 - total flux cleaned = 0.00216911 Jy ! Total flux subtracted in 200 components = 0.00216911 Jy ! Clean residual min=-0.004483 max=0.004009 Jy/beam ! Clean residual mean=0.000004 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.0871036 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.0871036 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.429 mas, bmaj=16.01 mas, bpa=3.369 degrees ! Estimated noise=2403.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000539536 Jy ! Component: 100 - total flux cleaned = 0.000561946 Jy ! Component: 150 - total flux cleaned = 0.000598787 Jy ! Component: 200 - total flux cleaned = 0.000627873 Jy ! Total flux subtracted in 200 components = 0.000627873 Jy ! Clean residual min=-0.003275 max=0.004178 Jy/beam ! Clean residual mean=0.000015 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.0877315 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.45135e-05 Jy ! Component: 100 - total flux cleaned = 3.54248e-05 Jy ! Component: 150 - total flux cleaned = 4.62261e-05 Jy ! Component: 200 - total flux cleaned = 5.55356e-05 Jy ! Total flux subtracted in 200 components = 5.55356e-05 Jy ! Clean residual min=-0.003257 max=0.004166 Jy/beam ! Clean residual mean=0.000015 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.087787 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.087787 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=6.972 mas, bpa=-6.228 degrees ! Estimated noise=1633.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003725 Jy ! Component: 100 - total flux cleaned = -0.000371906 Jy ! Component: 150 - total flux cleaned = -0.000341531 Jy ! Component: 200 - total flux cleaned = -0.000316087 Jy ! Total flux subtracted in 200 components = -0.000316087 Jy ! Clean residual min=-0.004279 max=0.004038 Jy/beam ! Clean residual mean=0.000004 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.087471 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.087471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129515Jy sigma=0.000623 ! Fit after self-cal, rms=0.129497Jy sigma=0.000623 wmodel J1557-2724_S_2017_01_21_pus_map.mod ! Writing 47 model components to file: J1557-2724_S_2017_01_21_pus_map.mod wobs J1557-2724_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1557-2724_S_2017_01_21_pus_uvs.fits wwins J1557-2724_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1557-2724_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490617 Jy ! Component: 100 - total flux cleaned = -0.000933127 Jy ! Component: 150 - total flux cleaned = -0.00127398 Jy ! Component: 200 - total flux cleaned = -0.00143208 Jy ! Component: 250 - total flux cleaned = -0.0014345 Jy ! Component: 300 - total flux cleaned = -0.00148126 Jy ! Component: 350 - total flux cleaned = -0.00139668 Jy ! Component: 400 - total flux cleaned = -0.00111282 Jy ! Component: 450 - total flux cleaned = -0.000844361 Jy ! Component: 500 - total flux cleaned = -0.000586904 Jy ! Component: 550 - total flux cleaned = -0.0003755 Jy ! Component: 600 - total flux cleaned = -0.000240321 Jy ! Component: 650 - total flux cleaned = -0.000108845 Jy ! Component: 700 - total flux cleaned = -1.3059e-05 Jy ! Component: 750 - total flux cleaned = 0.000172492 Jy ! Component: 800 - total flux cleaned = 0.000262941 Jy ! Component: 850 - total flux cleaned = 0.000409745 Jy ! Component: 900 - total flux cleaned = 0.000582397 Jy ! Component: 950 - total flux cleaned = 0.00077975 Jy ! Component: 1000 - total flux cleaned = 0.000945505 Jy ! Component: 1050 - total flux cleaned = 0.000972178 Jy ! Component: 1100 - total flux cleaned = 0.00110546 Jy ! Component: 1150 - total flux cleaned = 0.00121012 Jy ! Component: 1200 - total flux cleaned = 0.00131384 Jy ! Component: 1250 - total flux cleaned = 0.00149251 Jy ! Component: 1300 - total flux cleaned = 0.00159324 Jy ! Component: 1350 - total flux cleaned = 0.00169283 Jy ! Component: 1400 - total flux cleaned = 0.00184109 Jy ! Component: 1450 - total flux cleaned = 0.00191462 Jy ! Component: 1500 - total flux cleaned = 0.00198754 Jy ! Component: 1550 - total flux cleaned = 0.00206004 Jy ! Component: 1600 - total flux cleaned = 0.00218022 Jy ! Component: 1650 - total flux cleaned = 0.00229956 Jy ! Component: 1700 - total flux cleaned = 0.00239435 Jy ! Component: 1750 - total flux cleaned = 0.00248863 Jy ! Component: 1800 - total flux cleaned = 0.00255913 Jy ! Component: 1850 - total flux cleaned = 0.00262937 Jy ! Component: 1900 - total flux cleaned = 0.00272268 Jy ! Component: 1950 - total flux cleaned = 0.00279255 Jy ! Component: 2000 - total flux cleaned = 0.002886 Jy ! Component: 2050 - total flux cleaned = 0.00300295 Jy ! Component: 2100 - total flux cleaned = 0.00304947 Jy ! Component: 2150 - total flux cleaned = 0.00309614 Jy ! Component: 2200 - total flux cleaned = 0.00316614 Jy ! Component: 2250 - total flux cleaned = 0.00323631 Jy ! Component: 2300 - total flux cleaned = 0.00328315 Jy ! Component: 2350 - total flux cleaned = 0.00333037 Jy ! Component: 2400 - total flux cleaned = 0.00335401 Jy ! Component: 2450 - total flux cleaned = 0.0034252 Jy ! Component: 2500 - total flux cleaned = 0.00349657 Jy ! Component: 2550 - total flux cleaned = 0.00352061 Jy ! Component: 2600 - total flux cleaned = 0.00354478 Jy ! Component: 2650 - total flux cleaned = 0.00356922 Jy ! Component: 2700 - total flux cleaned = 0.00352037 Jy ! Component: 2750 - total flux cleaned = 0.00356946 Jy ! Component: 2800 - total flux cleaned = 0.00354461 Jy ! Component: 2850 - total flux cleaned = 0.00356937 Jy ! Component: 2900 - total flux cleaned = 0.00359431 Jy ! Component: 2950 - total flux cleaned = 0.00364484 Jy ! Component: 3000 - total flux cleaned = 0.00364495 Jy ! Component: 3050 - total flux cleaned = 0.00367056 Jy ! Component: 3100 - total flux cleaned = 0.00367048 Jy ! Component: 3150 - total flux cleaned = 0.00367032 Jy ! Component: 3200 - total flux cleaned = 0.00367049 Jy ! Component: 3250 - total flux cleaned = 0.00367042 Jy ! Component: 3300 - total flux cleaned = 0.00369731 Jy ! Component: 3350 - total flux cleaned = 0.0037242 Jy ! Component: 3400 - total flux cleaned = 0.00377918 Jy ! Component: 3450 - total flux cleaned = 0.00383499 Jy ! Component: 3500 - total flux cleaned = 0.0038349 Jy ! Component: 3550 - total flux cleaned = 0.00380624 Jy ! Component: 3600 - total flux cleaned = 0.00380616 Jy ! Component: 3650 - total flux cleaned = 0.0038064 Jy ! Component: 3700 - total flux cleaned = 0.00377709 Jy ! Component: 3750 - total flux cleaned = 0.0037469 Jy ! Component: 3800 - total flux cleaned = 0.00377724 Jy ! Component: 3850 - total flux cleaned = 0.00374684 Jy ! Component: 3900 - total flux cleaned = 0.0037476 Jy ! Component: 3950 - total flux cleaned = 0.00371638 Jy ! Component: 4000 - total flux cleaned = 0.00368471 Jy ! Component: 4050 - total flux cleaned = 0.00365245 Jy ! Total flux subtracted in 4096 components = 0.00361969 Jy ! Clean residual min=-0.001939 max=0.001954 Jy/beam ! Clean residual mean=-0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0910907 Jy keep ! Adding 205 model components to the UV plane model. ! The established model now contains 252 components and 0.0910907 Jy ![Exited script file: muppet] wmap "J1557-2724_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.547 x 6.972 at -6.228 degrees (North through East) ! Clean map min=-0.003519 max=0.081096 Jy/beam ! Writing clean map to FITS file: J1557-2724_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.081096 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000482939 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.78655 1.78655 3.57309 7.14618 14.2924 28.5847 57.1695 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.547 x 6.972 at -6.228 degrees (North through East) ! Clean map min=-0.003519 max=0.081096 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1557-2724_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:58:09 2019