! Started logfile: J1557-2724_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:17:16 2019 obs J1557-2724_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1557-2724_S_2017_01_16_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784779 visibilities/baseline/integration-bin. ! Found source: J1557-2724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 20624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1557-2724_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970442Jy sigma=0.005829 ! Fit after self-cal, rms=0.928869Jy sigma=0.005658 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=13.75 mas, bpa=15.23 degrees ! Estimated noise=1756.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606918 Jy ! Component: 100 - total flux cleaned = 0.0740453 Jy ! Total flux subtracted in 100 components = 0.0740453 Jy ! Clean residual min=-0.005800 max=0.006483 Jy/beam ! Clean residual mean=-0.000016 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.0740453 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0740453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169232Jy sigma=0.000661 ! Fit after self-cal, rms=0.169046Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=15.05 mas, bpa=14.72 degrees ! Estimated noise=869.073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602764 Jy ! Component: 100 - total flux cleaned = 0.00869381 Jy ! Component: 150 - total flux cleaned = 0.0100494 Jy ! Component: 200 - total flux cleaned = 0.010532 Jy ! Total flux subtracted in 200 components = 0.010532 Jy ! Clean residual min=-0.002882 max=0.003164 Jy/beam ! Clean residual mean=-0.000005 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.0845773 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.0845773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168597Jy sigma=0.000659 ! Fit after self-cal, rms=0.168614Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.08 KP 1.01 ! LA 1.02 MK 1.00* NL 0.92 OV 1.05 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.05 KP 1.05 ! LA 1.03 MK 1.00* NL 1.03 OV 1.07 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.99 KP 1.04 ! LA 1.06 MK 1.00* NL 1.05 OV 1.04 ! PT 0.94 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.88 KP 0.98 ! LA 0.53 MK 1.00* NL 1.00* OV 0.93 ! PT 1.01 SC 0.75 ! ! ! Fit before self-cal, rms=0.168614Jy sigma=0.000659 ! Fit after self-cal, rms=0.133806Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=15.1 mas, bpa=14.7 degrees ! Estimated noise=873.527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110679 Jy ! Component: 100 - total flux cleaned = 0.00115804 Jy ! Component: 150 - total flux cleaned = 0.00115805 Jy ! Component: 200 - total flux cleaned = 0.00117733 Jy ! Total flux subtracted in 200 components = 0.00117733 Jy ! Clean residual min=-0.002403 max=0.002363 Jy/beam ! Clean residual mean=0.000009 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0857546 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0857546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133783Jy sigma=0.000657 ! Fit after self-cal, rms=0.133568Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133568Jy sigma=0.000656 ! Fit after self-cal, rms=0.132074Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=15.06 mas, bpa=14.75 degrees ! Estimated noise=876.581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000794924 Jy ! Component: 100 - total flux cleaned = 0.000881836 Jy ! Component: 150 - total flux cleaned = 0.000935116 Jy ! Component: 200 - total flux cleaned = 0.000965733 Jy ! Total flux subtracted in 200 components = 0.000965733 Jy ! Clean residual min=-0.002495 max=0.002410 Jy/beam ! Clean residual mean=0.000011 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0867204 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.0867204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132056Jy sigma=0.000656 ! Fit after self-cal, rms=0.132033Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.99108e-05 Jy ! Component: 100 - total flux cleaned = 4.46421e-05 Jy ! Component: 150 - total flux cleaned = 4.45724e-05 Jy ! Component: 200 - total flux cleaned = 4.45287e-05 Jy ! Total flux subtracted in 200 components = 4.45287e-05 Jy ! Clean residual min=-0.002531 max=0.002406 Jy/beam ! Clean residual mean=0.000011 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0867649 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.0867649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132028Jy sigma=0.000656 ! Fit after self-cal, rms=0.132028Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132028Jy sigma=0.000656 ! Fit after self-cal, rms=0.125689Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=15.01 mas, bpa=14.72 degrees ! Estimated noise=879.028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.546e-05 Jy ! Component: 100 - total flux cleaned = 0.000171971 Jy ! Component: 150 - total flux cleaned = 0.000203839 Jy ! Component: 200 - total flux cleaned = 0.000190145 Jy ! Total flux subtracted in 200 components = 0.000190145 Jy ! Clean residual min=-0.002549 max=0.002158 Jy/beam ! Clean residual mean=0.000002 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0869551 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.086955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125681Jy sigma=0.000655 ! Fit after self-cal, rms=0.125602Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.7469e-06 Jy ! Component: 100 - total flux cleaned = 4.54146e-05 Jy ! Component: 150 - total flux cleaned = 4.49149e-05 Jy ! Component: 200 - total flux cleaned = 5.65849e-05 Jy ! Total flux subtracted in 200 components = 5.65849e-05 Jy ! Clean residual min=-0.002607 max=0.002062 Jy/beam ! Clean residual mean=0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0870116 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.0870116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125597Jy sigma=0.000655 ! Fit after self-cal, rms=0.125595Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125595Jy sigma=0.000655 ! Fit after self-cal, rms=0.125878Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.103 mas, bmaj=22.01 mas, bpa=5.902 degrees ! Estimated noise=1019.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487427 Jy ! Component: 100 - total flux cleaned = 0.000512462 Jy ! Component: 150 - total flux cleaned = 0.000543181 Jy ! Component: 200 - total flux cleaned = 0.000560097 Jy ! Total flux subtracted in 200 components = 0.000560097 Jy ! Clean residual min=-0.002154 max=0.002059 Jy/beam ! Clean residual mean=0.000004 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0875717 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.0875717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125874Jy sigma=0.000655 ! Fit after self-cal, rms=0.125876Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.02756e-05 Jy ! Component: 100 - total flux cleaned = 4.93363e-05 Jy ! Component: 150 - total flux cleaned = 4.9406e-05 Jy ! Component: 200 - total flux cleaned = 4.98038e-05 Jy ! Total flux subtracted in 200 components = 4.98038e-05 Jy ! Clean residual min=-0.002112 max=0.002068 Jy/beam ! Clean residual mean=0.000004 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0876215 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.0876215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125875Jy sigma=0.000655 ! Fit after self-cal, rms=0.125875Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=14.99 mas, bpa=14.71 degrees ! Estimated noise=881.462 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 14.99 at 14.71 degrees (North through East) ! Clean map min=-0.0025272 max=0.081607 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=13.66 mas, bpa=15.37 degrees ! Estimated noise=1751.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0605128 Jy ! Component: 100 - total flux cleaned = 0.0742173 Jy ! Component: 150 - total flux cleaned = 0.0800969 Jy ! Component: 200 - total flux cleaned = 0.0820074 Jy ! Total flux subtracted in 200 components = 0.0820074 Jy ! Clean residual min=-0.005271 max=0.004496 Jy/beam ! Clean residual mean=-0.000011 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.0820074 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0820074 Jy ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=14.99 mas, bpa=14.71 degrees ! Estimated noise=881.462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392134 Jy ! Component: 100 - total flux cleaned = 0.00516446 Jy ! Component: 150 - total flux cleaned = 0.00542899 Jy ! Component: 200 - total flux cleaned = 0.00556518 Jy ! Total flux subtracted in 200 components = 0.00556518 Jy ! Clean residual min=-0.002565 max=0.002168 Jy/beam ! Clean residual mean=0.000001 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0875726 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.0875726 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.103 mas, bmaj=22.01 mas, bpa=5.902 degrees ! Estimated noise=1019.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286203 Jy ! Component: 100 - total flux cleaned = 0.000288523 Jy ! Component: 150 - total flux cleaned = 0.000257837 Jy ! Component: 200 - total flux cleaned = 0.00023011 Jy ! Total flux subtracted in 200 components = 0.00023011 Jy ! Clean residual min=-0.002161 max=0.002116 Jy/beam ! Clean residual mean=0.000004 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0878027 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.5725e-05 Jy ! Component: 100 - total flux cleaned = -6.2413e-05 Jy ! Component: 150 - total flux cleaned = -8.54555e-05 Jy ! Component: 200 - total flux cleaned = -0.00010696 Jy ! Total flux subtracted in 200 components = -0.00010696 Jy ! Clean residual min=-0.002134 max=0.002108 Jy/beam ! Clean residual mean=0.000004 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0876958 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.0876958 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=14.99 mas, bpa=14.71 degrees ! Estimated noise=881.462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013488 Jy ! Component: 100 - total flux cleaned = -0.000204949 Jy ! Component: 150 - total flux cleaned = -0.000224956 Jy ! Component: 200 - total flux cleaned = -0.000242874 Jy ! Total flux subtracted in 200 components = -0.000242874 Jy ! Clean residual min=-0.002650 max=0.002110 Jy/beam ! Clean residual mean=0.000002 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0874529 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0874529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125883Jy sigma=0.000655 ! Fit after self-cal, rms=0.125874Jy sigma=0.000655 wmodel J1557-2724_S_2017_01_16_pus_map.mod ! Writing 53 model components to file: J1557-2724_S_2017_01_16_pus_map.mod wobs J1557-2724_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1557-2724_S_2017_01_16_pus_uvs.fits wwins J1557-2724_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1557-2724_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000723355 Jy ! Component: 100 - total flux cleaned = -0.000871102 Jy ! Component: 150 - total flux cleaned = -0.000802422 Jy ! Component: 200 - total flux cleaned = -0.000573974 Jy ! Component: 250 - total flux cleaned = -0.000354525 Jy ! Component: 300 - total flux cleaned = -0.000141657 Jy ! Component: 350 - total flux cleaned = 3.52782e-05 Jy ! Component: 400 - total flux cleaned = 0.000235543 Jy ! Component: 450 - total flux cleaned = 0.000374659 Jy ! Component: 500 - total flux cleaned = 0.000538376 Jy ! Component: 550 - total flux cleaned = 0.000618787 Jy ! Component: 600 - total flux cleaned = 0.000750139 Jy ! Component: 650 - total flux cleaned = 0.000801857 Jy ! Component: 700 - total flux cleaned = 0.000877832 Jy ! Component: 750 - total flux cleaned = 0.000952267 Jy ! Component: 800 - total flux cleaned = 0.00102554 Jy ! Component: 850 - total flux cleaned = 0.0011451 Jy ! Component: 900 - total flux cleaned = 0.00116868 Jy ! Component: 950 - total flux cleaned = 0.00126211 Jy ! Component: 1000 - total flux cleaned = 0.00135361 Jy ! Component: 1050 - total flux cleaned = 0.00146655 Jy ! Component: 1100 - total flux cleaned = 0.00146637 Jy ! Component: 1150 - total flux cleaned = 0.00153225 Jy ! Component: 1200 - total flux cleaned = 0.00153202 Jy ! Component: 1250 - total flux cleaned = 0.00151087 Jy ! Component: 1300 - total flux cleaned = 0.00149007 Jy ! Component: 1350 - total flux cleaned = 0.00153191 Jy ! Component: 1400 - total flux cleaned = 0.00146975 Jy ! Component: 1450 - total flux cleaned = 0.00146983 Jy ! Component: 1500 - total flux cleaned = 0.00142972 Jy ! Component: 1550 - total flux cleaned = 0.00146998 Jy ! Component: 1600 - total flux cleaned = 0.00150976 Jy ! Component: 1650 - total flux cleaned = 0.00158827 Jy ! Component: 1700 - total flux cleaned = 0.00166579 Jy ! Component: 1750 - total flux cleaned = 0.00174239 Jy ! Component: 1800 - total flux cleaned = 0.00181805 Jy ! Component: 1850 - total flux cleaned = 0.00185552 Jy ! Component: 1900 - total flux cleaned = 0.00194874 Jy ! Component: 1950 - total flux cleaned = 0.00196715 Jy ! Component: 2000 - total flux cleaned = 0.00198564 Jy ! Component: 2050 - total flux cleaned = 0.00200381 Jy ! Component: 2100 - total flux cleaned = 0.00207564 Jy ! Component: 2150 - total flux cleaned = 0.00204007 Jy ! Component: 2200 - total flux cleaned = 0.00214595 Jy ! Component: 2250 - total flux cleaned = 0.00212861 Jy ! Component: 2300 - total flux cleaned = 0.00214602 Jy ! Component: 2350 - total flux cleaned = 0.00223225 Jy ! Component: 2400 - total flux cleaned = 0.00224898 Jy ! Component: 2450 - total flux cleaned = 0.00228278 Jy ! Component: 2500 - total flux cleaned = 0.0023165 Jy ! Component: 2550 - total flux cleaned = 0.00234966 Jy ! Component: 2600 - total flux cleaned = 0.00236623 Jy ! Component: 2650 - total flux cleaned = 0.00239924 Jy ! Component: 2700 - total flux cleaned = 0.00248057 Jy ! Component: 2750 - total flux cleaned = 0.00243202 Jy ! Component: 2800 - total flux cleaned = 0.00252836 Jy ! Component: 2850 - total flux cleaned = 0.00257611 Jy ! Component: 2900 - total flux cleaned = 0.00268674 Jy ! Component: 2950 - total flux cleaned = 0.00271801 Jy ! Component: 3000 - total flux cleaned = 0.00278041 Jy ! Component: 3050 - total flux cleaned = 0.00285777 Jy ! Component: 3100 - total flux cleaned = 0.00285785 Jy ! Component: 3150 - total flux cleaned = 0.00296479 Jy ! Component: 3200 - total flux cleaned = 0.0030253 Jy ! Component: 3250 - total flux cleaned = 0.00305555 Jy ! Component: 3300 - total flux cleaned = 0.0031452 Jy ! Component: 3350 - total flux cleaned = 0.00320444 Jy ! Component: 3400 - total flux cleaned = 0.00327819 Jy ! Component: 3450 - total flux cleaned = 0.00336586 Jy ! Component: 3500 - total flux cleaned = 0.00345289 Jy ! Component: 3550 - total flux cleaned = 0.00351024 Jy ! Component: 3600 - total flux cleaned = 0.00353893 Jy ! Component: 3650 - total flux cleaned = 0.00362429 Jy ! Component: 3700 - total flux cleaned = 0.00365251 Jy ! Component: 3750 - total flux cleaned = 0.00372264 Jy ! Component: 3800 - total flux cleaned = 0.00382022 Jy ! Component: 3850 - total flux cleaned = 0.00387558 Jy ! Component: 3900 - total flux cleaned = 0.00393062 Jy ! Component: 3950 - total flux cleaned = 0.00397158 Jy ! Component: 4000 - total flux cleaned = 0.00402599 Jy ! Component: 4050 - total flux cleaned = 0.00410675 Jy ! Total flux subtracted in 4096 components = 0.00413373 Jy ! Clean residual min=-0.000721 max=0.000721 Jy/beam ! Clean residual mean=0.000003 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0915866 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 323 components and 0.0915866 Jy ![Exited script file: muppet] wmap "J1557-2724_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 14.99 at 14.71 degrees (North through East) ! Clean map min=-0.0022079 max=0.081109 Jy/beam ! Writing clean map to FITS file: J1557-2724_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0811089 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000265048 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.980341 0.980341 1.96068 3.92136 7.84273 15.6855 31.3709 62.7418 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 14.99 at 14.71 degrees (North through East) ! Clean map min=-0.0022079 max=0.081109 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1557-2724_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:17:21 2019