! Started logfile: J1557+4522_S_2017_02_24_pus_uvs.log on Sat May 4 11:29:58 2019 obs J1557+4522_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1557+4522_S_2017_02_24_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781318 visibilities/baseline/integration-bin. ! Found source: J1557+4522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 15892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1557+4522_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 683 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963378Jy sigma=0.009453 ! Fit after self-cal, rms=0.948384Jy sigma=0.009310 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=6.192 mas, bpa=19.82 degrees ! Estimated noise=1050.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412833 Jy ! Component: 100 - total flux cleaned = 0.051106 Jy ! Total flux subtracted in 100 components = 0.051106 Jy ! Clean residual min=-0.003292 max=0.003795 Jy/beam ! Clean residual mean=0.000003 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.051106 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.051106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069804Jy sigma=0.000657 ! Fit after self-cal, rms=0.069675Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.923 mas, bmaj=7.397 mas, bpa=19.72 degrees ! Estimated noise=680.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399442 Jy ! Component: 100 - total flux cleaned = 0.00517644 Jy ! Component: 150 - total flux cleaned = 0.00525039 Jy ! Component: 200 - total flux cleaned = 0.00533563 Jy ! Total flux subtracted in 200 components = 0.00533563 Jy ! Clean residual min=-0.002054 max=0.002495 Jy/beam ! Clean residual mean=0.000011 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0564416 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.0564416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069470Jy sigma=0.000653 ! Fit after self-cal, rms=0.069464Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 0.99 KP 0.91 ! LA 0.96 MK 0.99 NL 1.05 OV 1.10 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.91 HN 1.11 KP 0.93 ! LA 1.11 MK 0.93 NL 0.95 OV 1.11 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.24 KP 1.17 ! LA 1.08 MK 0.91 NL 1.13 OV 0.92 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.98 KP 1.00* ! LA 0.98 MK 1.08 NL 1.00* OV 1.14 ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.069464Jy sigma=0.000653 ! Fit after self-cal, rms=0.069487Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=7.34 mas, bpa=20.17 degrees ! Estimated noise=681.268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245386 Jy ! Component: 100 - total flux cleaned = -0.000263226 Jy ! Component: 150 - total flux cleaned = -0.000263314 Jy ! Component: 200 - total flux cleaned = -0.000263705 Jy ! Total flux subtracted in 200 components = -0.000263705 Jy ! Clean residual min=-0.001807 max=0.001964 Jy/beam ! Clean residual mean=0.000005 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0561779 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.0561779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069479Jy sigma=0.000651 ! Fit after self-cal, rms=0.069546Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069546Jy sigma=0.000651 ! Fit after self-cal, rms=0.075371Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=7.382 mas, bpa=20.61 degrees ! Estimated noise=683.676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163076 Jy ! Component: 100 - total flux cleaned = -0.000196945 Jy ! Component: 150 - total flux cleaned = -0.00023464 Jy ! Component: 200 - total flux cleaned = -0.000257953 Jy ! Total flux subtracted in 200 components = -0.000257953 Jy ! Clean residual min=-0.001614 max=0.001714 Jy/beam ! Clean residual mean=-0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.05592 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.05592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075365Jy sigma=0.000647 ! Fit after self-cal, rms=0.075607Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183733 Jy ! Component: 100 - total flux cleaned = -0.00020907 Jy ! Component: 150 - total flux cleaned = -0.000230909 Jy ! Component: 200 - total flux cleaned = -0.000244169 Jy ! Total flux subtracted in 200 components = -0.000244169 Jy ! Clean residual min=-0.001631 max=0.001659 Jy/beam ! Clean residual mean=-0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0556758 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.0556758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075604Jy sigma=0.000647 ! Fit after self-cal, rms=0.075607Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075607Jy sigma=0.000647 ! Fit after self-cal, rms=0.077961Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=7.399 mas, bpa=20.69 degrees ! Estimated noise=686.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.18037e-05 Jy ! Component: 100 - total flux cleaned = -0.000100169 Jy ! Component: 150 - total flux cleaned = -0.000116586 Jy ! Component: 200 - total flux cleaned = -0.000124098 Jy ! Total flux subtracted in 200 components = -0.000124098 Jy ! Clean residual min=-0.001608 max=0.001663 Jy/beam ! Clean residual mean=-0.000003 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0555517 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.0555517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077957Jy sigma=0.000646 ! Fit after self-cal, rms=0.078003Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.48249e-05 Jy ! Component: 100 - total flux cleaned = -5.75484e-05 Jy ! Component: 150 - total flux cleaned = -7.62241e-05 Jy ! Component: 200 - total flux cleaned = -8.17696e-05 Jy ! Total flux subtracted in 200 components = -8.17696e-05 Jy ! Clean residual min=-0.001619 max=0.001660 Jy/beam ! Clean residual mean=-0.000002 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0554699 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0554699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078001Jy sigma=0.000646 ! Fit after self-cal, rms=0.078004Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078004Jy sigma=0.000646 ! Fit after self-cal, rms=0.078590Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.07 mas, bmaj=10.98 mas, bpa=25.41 degrees ! Estimated noise=807.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192283 Jy ! Component: 100 - total flux cleaned = -0.000229262 Jy ! Component: 150 - total flux cleaned = -0.000253162 Jy ! Component: 200 - total flux cleaned = -0.000268837 Jy ! Total flux subtracted in 200 components = -0.000268837 Jy ! Clean residual min=-0.001816 max=0.001711 Jy/beam ! Clean residual mean=-0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0552011 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.0552011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078588Jy sigma=0.000646 ! Fit after self-cal, rms=0.078600Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.75671e-05 Jy ! Component: 100 - total flux cleaned = -2.89251e-05 Jy ! Component: 150 - total flux cleaned = -3.84171e-05 Jy ! Component: 200 - total flux cleaned = -4.66922e-05 Jy ! Total flux subtracted in 200 components = -4.66922e-05 Jy ! Clean residual min=-0.001798 max=0.001710 Jy/beam ! Clean residual mean=-0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0551544 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.0551544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078599Jy sigma=0.000646 ! Fit after self-cal, rms=0.078599Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=7.409 mas, bpa=20.7 degrees ! Estimated noise=688.459 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 7.409 at 20.7 degrees (North through East) ! Clean map min=-0.0015504 max=0.053748 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=6.254 mas, bpa=21.23 degrees ! Estimated noise=1067.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416467 Jy ! Component: 100 - total flux cleaned = 0.0516149 Jy ! Component: 150 - total flux cleaned = 0.0554959 Jy ! Component: 200 - total flux cleaned = 0.0565671 Jy ! Total flux subtracted in 200 components = 0.0565671 Jy ! Clean residual min=-0.002598 max=0.002890 Jy/beam ! Clean residual mean=-0.000003 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0565671 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0565671 Jy ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=7.409 mas, bpa=20.7 degrees ! Estimated noise=688.459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000732419 Jy ! Component: 100 - total flux cleaned = -0.000924182 Jy ! Component: 150 - total flux cleaned = -0.00105651 Jy ! Component: 200 - total flux cleaned = -0.00110911 Jy ! Total flux subtracted in 200 components = -0.00110911 Jy ! Clean residual min=-0.001610 max=0.001654 Jy/beam ! Clean residual mean=-0.000003 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.055458 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.055458 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.07 mas, bmaj=10.98 mas, bpa=25.41 degrees ! Estimated noise=807.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203584 Jy ! Component: 100 - total flux cleaned = -0.00022597 Jy ! Component: 150 - total flux cleaned = -0.000243029 Jy ! Component: 200 - total flux cleaned = -0.000266201 Jy ! Total flux subtracted in 200 components = -0.000266201 Jy ! Clean residual min=-0.001805 max=0.001692 Jy/beam ! Clean residual mean=-0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0551918 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.6118e-05 Jy ! Component: 100 - total flux cleaned = -2.73077e-05 Jy ! Component: 150 - total flux cleaned = -3.43108e-05 Jy ! Component: 200 - total flux cleaned = -4.10617e-05 Jy ! Total flux subtracted in 200 components = -4.10617e-05 Jy ! Clean residual min=-0.001804 max=0.001698 Jy/beam ! Clean residual mean=-0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0551508 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.0551508 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=7.409 mas, bpa=20.7 degrees ! Estimated noise=688.459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.32698e-05 Jy ! Component: 100 - total flux cleaned = 7.39605e-05 Jy ! Component: 150 - total flux cleaned = 8.3897e-05 Jy ! Component: 200 - total flux cleaned = 7.45602e-05 Jy ! Total flux subtracted in 200 components = 7.45602e-05 Jy ! Clean residual min=-0.001632 max=0.001654 Jy/beam ! Clean residual mean=-0.000002 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0552254 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.0552254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078604Jy sigma=0.000646 ! Fit after self-cal, rms=0.078602Jy sigma=0.000646 wmodel J1557+4522_S_2017_02_24_pus_map.mod ! Writing 52 model components to file: J1557+4522_S_2017_02_24_pus_map.mod wobs J1557+4522_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1557+4522_S_2017_02_24_pus_uvs.fits wwins J1557+4522_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J1557+4522_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329259 Jy ! Component: 100 - total flux cleaned = 0.000609038 Jy ! Component: 150 - total flux cleaned = 0.000768782 Jy ! Component: 200 - total flux cleaned = 0.00105152 Jy ! Component: 250 - total flux cleaned = 0.00120104 Jy ! Component: 300 - total flux cleaned = 0.00129789 Jy ! Component: 350 - total flux cleaned = 0.0013451 Jy ! Component: 400 - total flux cleaned = 0.00139145 Jy ! Component: 450 - total flux cleaned = 0.00150423 Jy ! Component: 500 - total flux cleaned = 0.00154813 Jy ! Component: 550 - total flux cleaned = 0.00156996 Jy ! Component: 600 - total flux cleaned = 0.00161223 Jy ! Component: 650 - total flux cleaned = 0.00167409 Jy ! Component: 700 - total flux cleaned = 0.00167409 Jy ! Component: 750 - total flux cleaned = 0.00163397 Jy ! Component: 800 - total flux cleaned = 0.00161456 Jy ! Component: 850 - total flux cleaned = 0.00159504 Jy ! Component: 900 - total flux cleaned = 0.00153765 Jy ! Component: 950 - total flux cleaned = 0.00146283 Jy ! Component: 1000 - total flux cleaned = 0.0014441 Jy ! Component: 1050 - total flux cleaned = 0.00140749 Jy ! Component: 1100 - total flux cleaned = 0.00129973 Jy ! Component: 1150 - total flux cleaned = 0.00122876 Jy ! Component: 1200 - total flux cleaned = 0.00115846 Jy ! Component: 1250 - total flux cleaned = 0.00107225 Jy ! Component: 1300 - total flux cleaned = 0.00100396 Jy ! Component: 1350 - total flux cleaned = 0.000936672 Jy ! Component: 1400 - total flux cleaned = 0.000837089 Jy ! Component: 1450 - total flux cleaned = 0.000804152 Jy ! Component: 1500 - total flux cleaned = 0.000706545 Jy ! Component: 1550 - total flux cleaned = 0.000658181 Jy ! Component: 1600 - total flux cleaned = 0.000546761 Jy ! Component: 1650 - total flux cleaned = 0.000483793 Jy ! Component: 1700 - total flux cleaned = 0.000375024 Jy ! Component: 1750 - total flux cleaned = 0.00031338 Jy ! Component: 1800 - total flux cleaned = 0.000206781 Jy ! Component: 1850 - total flux cleaned = 0.000161658 Jy ! Component: 1900 - total flux cleaned = 0.000102187 Jy ! Component: 1950 - total flux cleaned = 5.76904e-05 Jy ! Component: 2000 - total flux cleaned = -7.39625e-05 Jy ! Component: 2050 - total flux cleaned = -8.82603e-05 Jy ! Component: 2100 - total flux cleaned = -0.000188921 Jy ! Component: 2150 - total flux cleaned = -0.000231612 Jy ! Component: 2200 - total flux cleaned = -0.000287875 Jy ! Component: 2250 - total flux cleaned = -0.000385669 Jy ! Component: 2300 - total flux cleaned = -0.000468576 Jy ! Component: 2350 - total flux cleaned = -0.000523405 Jy ! Component: 2400 - total flux cleaned = -0.000591432 Jy ! Component: 2450 - total flux cleaned = -0.000699118 Jy ! Component: 2500 - total flux cleaned = -0.000752663 Jy ! Component: 2550 - total flux cleaned = -0.000872004 Jy ! Component: 2600 - total flux cleaned = -0.000924638 Jy ! Component: 2650 - total flux cleaned = -0.00104225 Jy ! Component: 2700 - total flux cleaned = -0.00115864 Jy ! Component: 2750 - total flux cleaned = -0.00122285 Jy ! Component: 2800 - total flux cleaned = -0.00127382 Jy ! Component: 2850 - total flux cleaned = -0.0013624 Jy ! Component: 2900 - total flux cleaned = -0.00145024 Jy ! Component: 2950 - total flux cleaned = -0.00153747 Jy ! Component: 3000 - total flux cleaned = -0.00159926 Jy ! Component: 3050 - total flux cleaned = -0.00168507 Jy ! Component: 3100 - total flux cleaned = -0.00180682 Jy ! Component: 3150 - total flux cleaned = -0.00187925 Jy ! Component: 3200 - total flux cleaned = -0.00196304 Jy ! Component: 3250 - total flux cleaned = -0.00202249 Jy ! Component: 3300 - total flux cleaned = -0.00211709 Jy ! Component: 3350 - total flux cleaned = -0.00221099 Jy ! Component: 3400 - total flux cleaned = -0.00228098 Jy ! Component: 3450 - total flux cleaned = -0.00241986 Jy ! Component: 3500 - total flux cleaned = -0.00247738 Jy ! Component: 3550 - total flux cleaned = -0.00256869 Jy ! Component: 3600 - total flux cleaned = -0.00264805 Jy ! Component: 3650 - total flux cleaned = -0.00272698 Jy ! Component: 3700 - total flux cleaned = -0.00281638 Jy ! Component: 3750 - total flux cleaned = -0.00290538 Jy ! Component: 3800 - total flux cleaned = -0.00297163 Jy ! Component: 3850 - total flux cleaned = -0.00303743 Jy ! Component: 3900 - total flux cleaned = -0.00310277 Jy ! Component: 3950 - total flux cleaned = -0.00314604 Jy ! Component: 4000 - total flux cleaned = -0.00317831 Jy ! Component: 4050 - total flux cleaned = -0.00319981 Jy ! Total flux subtracted in 4096 components = -0.00324246 Jy ! Clean residual min=-0.000582 max=0.000642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.0519829 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 343 components and 0.0519829 Jy ![Exited script file: muppet] wmap "J1557+4522_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 7.409 at 20.7 degrees (North through East) ! Clean map min=-0.001418 max=0.053956 Jy/beam ! Writing clean map to FITS file: J1557+4522_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0539556 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195286 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08581 1.08581 2.17163 4.34326 8.68652 17.373 34.7461 69.4921 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 7.409 at 20.7 degrees (North through East) ! Clean map min=-0.001418 max=0.053956 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1557+4522_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:30:03 2019