! Started logfile: J1556+1825_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:59 2019 obs J1556+1825_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1556+1825_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.719298 visibilities/baseline/integration-bin. ! Found source: J1556+1825 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1556+1825_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987637Jy sigma=0.007637 ! Fit after self-cal, rms=0.947563Jy sigma=0.007380 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=5.734 mas, bpa=-3.174 degrees ! Estimated noise=1529.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424899 Jy ! Component: 100 - total flux cleaned = 0.0529294 Jy ! Total flux subtracted in 100 components = 0.0529294 Jy ! Clean residual min=-0.004200 max=0.004286 Jy/beam ! Clean residual mean=-0.000002 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0529294 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0529294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099862Jy sigma=0.000636 ! Fit after self-cal, rms=0.098830Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=6.388 mas, bpa=-2.346 degrees ! Estimated noise=936.526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567472 Jy ! Component: 100 - total flux cleaned = 0.00807836 Jy ! Component: 150 - total flux cleaned = 0.0094321 Jy ! Component: 200 - total flux cleaned = 0.0103312 Jy ! Total flux subtracted in 200 components = 0.0103312 Jy ! Clean residual min=-0.002974 max=0.003313 Jy/beam ! Clean residual mean=-0.000000 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0632606 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.0632606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098378Jy sigma=0.000629 ! Fit after self-cal, rms=0.098348Jy sigma=0.000628 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.04 LA 1.01 ! MK 0.98 NL 1.00 OV 0.95 PT 1.05 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.05 LA 1.04 ! MK 1.04 NL 0.99 OV 0.95 PT 1.10 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.07 LA 0.99 ! MK 1.05 NL 1.04 OV 0.88 PT 1.04 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.02 LA 1.03 ! MK 0.79 NL 1.00* OV 0.80 PT 0.93 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.098348Jy sigma=0.000628 ! Fit after self-cal, rms=0.094808Jy sigma=0.000627 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=6.383 mas, bpa=-2.387 degrees ! Estimated noise=942.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-34, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198813 Jy ! Component: 100 - total flux cleaned = 0.00158829 Jy ! Component: 150 - total flux cleaned = 0.00137547 Jy ! Component: 200 - total flux cleaned = 0.00124023 Jy ! Total flux subtracted in 200 components = 0.00124023 Jy ! Clean residual min=-0.002618 max=0.002688 Jy/beam ! Clean residual mean=0.000000 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0645009 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.0645009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094684Jy sigma=0.000626 ! Fit after self-cal, rms=0.094453Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094453Jy sigma=0.000625 ! Fit after self-cal, rms=0.089696Jy sigma=0.000624 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=6.393 mas, bpa=-2.54 degrees ! Estimated noise=933.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000774134 Jy ! Component: 100 - total flux cleaned = 0.000819041 Jy ! Component: 150 - total flux cleaned = 0.00089095 Jy ! Component: 200 - total flux cleaned = 0.000858452 Jy ! Total flux subtracted in 200 components = 0.000858452 Jy ! Clean residual min=-0.002317 max=0.002256 Jy/beam ! Clean residual mean=0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0653593 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.0653593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089658Jy sigma=0.000623 ! Fit after self-cal, rms=0.089558Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31, -123). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142888 Jy ! Component: 100 - total flux cleaned = 0.00133486 Jy ! Component: 150 - total flux cleaned = 0.00117384 Jy ! Component: 200 - total flux cleaned = 0.000988983 Jy ! Total flux subtracted in 200 components = 0.000988983 Jy ! Clean residual min=-0.002313 max=0.002049 Jy/beam ! Clean residual mean=0.000003 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0663483 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 77 components and 0.0663483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089498Jy sigma=0.000623 ! Fit after self-cal, rms=0.089484Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089484Jy sigma=0.000622 ! Fit after self-cal, rms=0.089337Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=6.383 mas, bpa=-2.351 degrees ! Estimated noise=933.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112667 Jy ! Component: 100 - total flux cleaned = 0.00134233 Jy ! Component: 150 - total flux cleaned = 0.00141892 Jy ! Component: 200 - total flux cleaned = 0.00138432 Jy ! Total flux subtracted in 200 components = 0.00138432 Jy ! Clean residual min=-0.002369 max=0.002013 Jy/beam ! Clean residual mean=0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0677326 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.0677326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089295Jy sigma=0.000622 ! Fit after self-cal, rms=0.089256Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639117 Jy ! Component: 100 - total flux cleaned = 0.000752494 Jy ! Component: 150 - total flux cleaned = 0.000719673 Jy ! Component: 200 - total flux cleaned = 0.00065818 Jy ! Total flux subtracted in 200 components = 0.00065818 Jy ! Clean residual min=-0.002546 max=0.002018 Jy/beam ! Clean residual mean=0.000004 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0683908 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 0.0683908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089228Jy sigma=0.000622 ! Fit after self-cal, rms=0.089222Jy sigma=0.000622 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089222Jy sigma=0.000622 ! Fit after self-cal, rms=0.089338Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.341 mas, bmaj=9.677 mas, bpa=0.5436 degrees ! Estimated noise=1274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114049 Jy ! Component: 100 - total flux cleaned = 0.00129816 Jy ! Component: 150 - total flux cleaned = 0.00146871 Jy ! Component: 200 - total flux cleaned = 0.00158704 Jy ! Total flux subtracted in 200 components = 0.00158704 Jy ! Clean residual min=-0.002642 max=0.002088 Jy/beam ! Clean residual mean=0.000009 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0699779 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 101 components and 0.0699779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089319Jy sigma=0.000622 ! Fit after self-cal, rms=0.089298Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002654 Jy ! Component: 100 - total flux cleaned = 0.00035729 Jy ! Component: 150 - total flux cleaned = 0.000410981 Jy ! Component: 200 - total flux cleaned = 0.00043575 Jy ! Total flux subtracted in 200 components = 0.00043575 Jy ! Clean residual min=-0.002570 max=0.002027 Jy/beam ! Clean residual mean=0.000010 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0704136 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 0.0704136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089291Jy sigma=0.000621 ! Fit after self-cal, rms=0.089295Jy sigma=0.000621 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=6.371 mas, bpa=-2.217 degrees ! Estimated noise=935.604 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.993 x 6.371 at -2.217 degrees (North through East) ! Clean map min=-0.0032086 max=0.055959 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=5.757 mas, bpa=-3.324 degrees ! Estimated noise=1497.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427111 Jy ! Component: 100 - total flux cleaned = 0.0543685 Jy ! Component: 150 - total flux cleaned = 0.0610412 Jy ! Component: 200 - total flux cleaned = 0.0650611 Jy ! Total flux subtracted in 200 components = 0.0650611 Jy ! Clean residual min=-0.003686 max=0.003674 Jy/beam ! Clean residual mean=0.000000 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0650612 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0650612 Jy ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=6.371 mas, bpa=-2.217 degrees ! Estimated noise=935.604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288654 Jy ! Component: 100 - total flux cleaned = 0.0034208 Jy ! Component: 150 - total flux cleaned = 0.00359855 Jy ! Component: 200 - total flux cleaned = 0.00375775 Jy ! Total flux subtracted in 200 components = 0.00375775 Jy ! Clean residual min=-0.002917 max=0.002259 Jy/beam ! Clean residual mean=0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0688189 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.0688189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.341 mas, bmaj=9.677 mas, bpa=0.5436 degrees ! Estimated noise=1274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152166 Jy ! Component: 100 - total flux cleaned = 0.00170917 Jy ! Component: 150 - total flux cleaned = 0.00187487 Jy ! Component: 200 - total flux cleaned = 0.00202122 Jy ! Total flux subtracted in 200 components = 0.00202122 Jy ! Clean residual min=-0.002869 max=0.002108 Jy/beam ! Clean residual mean=0.000012 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0708401 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.66707e-07 Jy ! Component: 100 - total flux cleaned = -8.18522e-07 Jy ! Component: 150 - total flux cleaned = -1.79732e-06 Jy ! Component: 200 - total flux cleaned = -6.67018e-05 Jy ! Total flux subtracted in 200 components = -6.67018e-05 Jy ! Clean residual min=-0.002754 max=0.002006 Jy/beam ! Clean residual mean=0.000012 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0707734 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 67 components and 0.0707734 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=6.371 mas, bpa=-2.217 degrees ! Estimated noise=935.604 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476732 Jy ! Component: 100 - total flux cleaned = 0.000528507 Jy ! Component: 150 - total flux cleaned = 0.000484651 Jy ! Component: 200 - total flux cleaned = 0.000323046 Jy ! Total flux subtracted in 200 components = 0.000323046 Jy ! Clean residual min=-0.002653 max=0.002010 Jy/beam ! Clean residual mean=0.000004 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0710965 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 0.0710965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089310Jy sigma=0.000622 ! Fit after self-cal, rms=0.089304Jy sigma=0.000621 wmodel J1556+1825_S_2017_01_21_pus_map.mod ! Writing 86 model components to file: J1556+1825_S_2017_01_21_pus_map.mod wobs J1556+1825_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1556+1825_S_2017_01_21_pus_uvs.fits wwins J1556+1825_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1556+1825_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000763904 Jy ! Component: 100 - total flux cleaned = -0.00121994 Jy ! Component: 150 - total flux cleaned = -0.00131891 Jy ! Component: 200 - total flux cleaned = -0.0013516 Jy ! Component: 250 - total flux cleaned = -0.00132131 Jy ! Component: 300 - total flux cleaned = -0.00117183 Jy ! Component: 350 - total flux cleaned = -0.00093776 Jy ! Component: 400 - total flux cleaned = -0.000794263 Jy ! Component: 450 - total flux cleaned = -0.000570378 Jy ! Component: 500 - total flux cleaned = -0.000542873 Jy ! Component: 550 - total flux cleaned = -0.000380735 Jy ! Component: 600 - total flux cleaned = -0.000327676 Jy ! Component: 650 - total flux cleaned = -0.000327457 Jy ! Component: 700 - total flux cleaned = -0.000352442 Jy ! Component: 750 - total flux cleaned = -0.000276369 Jy ! Component: 800 - total flux cleaned = -0.000301383 Jy ! Component: 850 - total flux cleaned = -0.000301242 Jy ! Component: 900 - total flux cleaned = -0.000350184 Jy ! Component: 950 - total flux cleaned = -0.000374161 Jy ! Component: 1000 - total flux cleaned = -0.000444667 Jy ! Component: 1050 - total flux cleaned = -0.000491051 Jy ! Component: 1100 - total flux cleaned = -0.000514419 Jy ! Component: 1150 - total flux cleaned = -0.000559555 Jy ! Component: 1200 - total flux cleaned = -0.000581322 Jy ! Component: 1250 - total flux cleaned = -0.000515351 Jy ! Component: 1300 - total flux cleaned = -0.000450275 Jy ! Component: 1350 - total flux cleaned = -0.000514621 Jy ! Component: 1400 - total flux cleaned = -0.000493383 Jy ! Component: 1450 - total flux cleaned = -0.000451619 Jy ! Component: 1500 - total flux cleaned = -0.000493142 Jy ! Component: 1550 - total flux cleaned = -0.000431582 Jy ! Component: 1600 - total flux cleaned = -0.000411218 Jy ! Component: 1650 - total flux cleaned = -0.000411292 Jy ! Component: 1700 - total flux cleaned = -0.000450676 Jy ! Component: 1750 - total flux cleaned = -0.000430771 Jy ! Component: 1800 - total flux cleaned = -0.000411095 Jy ! Component: 1850 - total flux cleaned = -0.000449669 Jy ! Component: 1900 - total flux cleaned = -0.000373255 Jy ! Component: 1950 - total flux cleaned = -0.000335753 Jy ! Component: 2000 - total flux cleaned = -0.000373192 Jy ! Component: 2050 - total flux cleaned = -0.000373147 Jy ! Component: 2100 - total flux cleaned = -0.000317837 Jy ! Component: 2150 - total flux cleaned = -0.000281571 Jy ! Component: 2200 - total flux cleaned = -0.00022764 Jy ! Component: 2250 - total flux cleaned = -0.000156451 Jy ! Component: 2300 - total flux cleaned = -0.000174153 Jy ! Component: 2350 - total flux cleaned = -0.00010407 Jy ! Component: 2400 - total flux cleaned = -8.66771e-05 Jy ! Component: 2450 - total flux cleaned = -0.000104028 Jy ! Component: 2500 - total flux cleaned = -3.56703e-05 Jy ! Component: 2550 - total flux cleaned = -1.91818e-06 Jy ! Component: 2600 - total flux cleaned = 4.82404e-05 Jy ! Component: 2650 - total flux cleaned = 6.4767e-05 Jy ! Component: 2700 - total flux cleaned = 0.000130777 Jy ! Component: 2750 - total flux cleaned = 0.000114475 Jy ! Component: 2800 - total flux cleaned = 0.000179658 Jy ! Component: 2850 - total flux cleaned = 0.000292642 Jy ! Component: 2900 - total flux cleaned = 0.000324432 Jy ! Component: 2950 - total flux cleaned = 0.000356202 Jy ! Component: 3000 - total flux cleaned = 0.000387747 Jy ! Component: 3050 - total flux cleaned = 0.000512847 Jy ! Component: 3100 - total flux cleaned = 0.000497262 Jy ! Component: 3150 - total flux cleaned = 0.000482004 Jy ! Component: 3200 - total flux cleaned = 0.000543631 Jy ! Component: 3250 - total flux cleaned = 0.00063499 Jy ! Component: 3300 - total flux cleaned = 0.000619742 Jy ! Component: 3350 - total flux cleaned = 0.000679833 Jy ! Component: 3400 - total flux cleaned = 0.000635048 Jy ! Component: 3450 - total flux cleaned = 0.000664891 Jy ! Component: 3500 - total flux cleaned = 0.000679517 Jy ! Component: 3550 - total flux cleaned = 0.000708853 Jy ! Component: 3600 - total flux cleaned = 0.000694565 Jy ! Component: 3650 - total flux cleaned = 0.000723279 Jy ! Component: 3700 - total flux cleaned = 0.000694648 Jy ! Component: 3750 - total flux cleaned = 0.000666118 Jy ! Component: 3800 - total flux cleaned = 0.000637889 Jy ! Component: 3850 - total flux cleaned = 0.00069424 Jy ! Component: 3900 - total flux cleaned = 0.000722102 Jy ! Component: 3950 - total flux cleaned = 0.000721889 Jy ! Component: 4000 - total flux cleaned = 0.000735643 Jy ! Component: 4050 - total flux cleaned = 0.000735616 Jy ! Total flux subtracted in 4096 components = 0.000735537 Jy ! Clean residual min=-0.001224 max=0.001028 Jy/beam ! Clean residual mean=-0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.071832 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 386 components and 0.071832 Jy ![Exited script file: muppet] wmap "J1556+1825_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.993 x 6.371 at -2.217 degrees (North through East) ! Clean map min=-0.0025146 max=0.055438 Jy/beam ! Writing clean map to FITS file: J1556+1825_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0554383 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241576 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30727 1.30727 2.61453 5.22907 10.4581 20.9163 41.8325 83.6651 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.993 x 6.371 at -2.217 degrees (North through East) ! Clean map min=-0.0025146 max=0.055438 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1556+1825_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:58:04 2019