! Started logfile: J1555-4150_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:25 2019 obs J1555-4150_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1555-4150_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.495402 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1555-4150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 10344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1555-4150_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 441 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 368 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 895 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957054Jy sigma=0.006182 ! Fit after self-cal, rms=0.902287Jy sigma=0.005830 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=12.1 mas, bpa=-24.16 degrees ! Estimated noise=2617.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722544 Jy ! Component: 100 - total flux cleaned = 0.0948183 Jy ! Total flux subtracted in 100 components = 0.0948183 Jy ! Clean residual min=-0.008514 max=0.010338 Jy/beam ! Clean residual mean=-0.000108 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 0.0948183 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0948183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117807Jy sigma=0.000713 ! Fit after self-cal, rms=0.117309Jy sigma=0.000711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=15.51 mas, bpa=-23.32 degrees ! Estimated noise=1292.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169866 Jy ! Component: 100 - total flux cleaned = 0.0243103 Jy ! Component: 150 - total flux cleaned = 0.0279569 Jy ! Component: 200 - total flux cleaned = 0.0298999 Jy ! Total flux subtracted in 200 components = 0.0298999 Jy ! Clean residual min=-0.004568 max=0.004131 Jy/beam ! Clean residual mean=-0.000082 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.124718 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 75 components and 0.124718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114931Jy sigma=0.000697 ! Fit after self-cal, rms=0.114833Jy sigma=0.000697 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.07 ! LA 1.01 MK 1.05 NL 1.00* OV 1.06 ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.07 ! LA 1.00 MK 1.06 NL 1.00* OV 1.06 ! PT 0.89 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.06 ! LA 0.84 MK 1.06 NL 1.16 OV 1.01 ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.00* ! LA 1.25 MK 0.96 NL 1.00* OV 1.00* ! PT 0.89 ! ! ! Fit before self-cal, rms=0.114833Jy sigma=0.000697 ! Fit after self-cal, rms=0.114212Jy sigma=0.000695 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=15.84 mas, bpa=-22.71 degrees ! Estimated noise=1323.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106301 Jy ! Component: 100 - total flux cleaned = 0.000133544 Jy ! Component: 150 - total flux cleaned = 0.000133546 Jy ! Component: 200 - total flux cleaned = 0.000182302 Jy ! Total flux subtracted in 200 components = 0.000182302 Jy ! Clean residual min=-0.003262 max=0.002796 Jy/beam ! Clean residual mean=-0.000041 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.1249 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.1249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114198Jy sigma=0.000695 ! Fit after self-cal, rms=0.114469Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114469Jy sigma=0.000694 ! Fit after self-cal, rms=0.114990Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=15.8 mas, bpa=-22.7 degrees ! Estimated noise=1324.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470547 Jy ! Component: 100 - total flux cleaned = 0.000443458 Jy ! Component: 150 - total flux cleaned = 0.000465497 Jy ! Component: 200 - total flux cleaned = 0.000464937 Jy ! Total flux subtracted in 200 components = 0.000464937 Jy ! Clean residual min=-0.003187 max=0.002733 Jy/beam ! Clean residual mean=-0.000036 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.125365 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.125365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114978Jy sigma=0.000694 ! Fit after self-cal, rms=0.115135Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.75906e-06 Jy ! Component: 100 - total flux cleaned = 1.60998e-05 Jy ! Component: 150 - total flux cleaned = 3.58632e-05 Jy ! Component: 200 - total flux cleaned = 5.43442e-05 Jy ! Total flux subtracted in 200 components = 5.43442e-05 Jy ! Clean residual min=-0.003288 max=0.002897 Jy/beam ! Clean residual mean=-0.000042 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.12542 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 95 components and 0.12542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115127Jy sigma=0.000694 ! Fit after self-cal, rms=0.115132Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115132Jy sigma=0.000694 ! Fit after self-cal, rms=0.115150Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=15.73 mas, bpa=-22.77 degrees ! Estimated noise=1319.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405314 Jy ! Component: 100 - total flux cleaned = 0.000403965 Jy ! Component: 150 - total flux cleaned = 0.000384203 Jy ! Component: 200 - total flux cleaned = 0.00040066 Jy ! Total flux subtracted in 200 components = 0.00040066 Jy ! Clean residual min=-0.003222 max=0.002825 Jy/beam ! Clean residual mean=-0.000037 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.12582 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 95 components and 0.12582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115141Jy sigma=0.000694 ! Fit after self-cal, rms=0.115206Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.81852e-06 Jy ! Component: 100 - total flux cleaned = 1.07476e-05 Jy ! Component: 150 - total flux cleaned = 2.66921e-05 Jy ! Component: 200 - total flux cleaned = 2.65509e-05 Jy ! Total flux subtracted in 200 components = 2.65509e-05 Jy ! Clean residual min=-0.003257 max=0.002914 Jy/beam ! Clean residual mean=-0.000038 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.125847 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 95 components and 0.125847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115200Jy sigma=0.000694 ! Fit after self-cal, rms=0.115204Jy sigma=0.000693 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115204Jy sigma=0.000693 ! Fit after self-cal, rms=0.115049Jy sigma=0.000693 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.18 mas, bmaj=34.92 mas, bpa=-10.65 degrees ! Estimated noise=1616.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346481 Jy ! Component: 100 - total flux cleaned = 0.000360064 Jy ! Component: 150 - total flux cleaned = 0.00037889 Jy ! Component: 200 - total flux cleaned = 0.000390814 Jy ! Total flux subtracted in 200 components = 0.000390814 Jy ! Clean residual min=-0.003240 max=0.002457 Jy/beam ! Clean residual mean=-0.000060 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.126238 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 101 components and 0.126238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115047Jy sigma=0.000693 ! Fit after self-cal, rms=0.115067Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.14183e-05 Jy ! Component: 100 - total flux cleaned = 2.13806e-05 Jy ! Component: 150 - total flux cleaned = 2.10441e-05 Jy ! Component: 200 - total flux cleaned = 2.59666e-05 Jy ! Total flux subtracted in 200 components = 2.59666e-05 Jy ! Clean residual min=-0.003230 max=0.002472 Jy/beam ! Clean residual mean=-0.000060 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.126264 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 102 components and 0.126264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115066Jy sigma=0.000693 ! Fit after self-cal, rms=0.115067Jy sigma=0.000693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=15.66 mas, bpa=-22.86 degrees ! Estimated noise=1316 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 15.66 at -22.86 degrees (North through East) ! Clean map min=-0.003181 max=0.095941 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=12.09 mas, bpa=-23.65 degrees ! Estimated noise=2738.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734175 Jy ! Component: 100 - total flux cleaned = 0.0971832 Jy ! Component: 150 - total flux cleaned = 0.10909 Jy ! Component: 200 - total flux cleaned = 0.116136 Jy ! Total flux subtracted in 200 components = 0.116136 Jy ! Clean residual min=-0.007425 max=0.005843 Jy/beam ! Clean residual mean=-0.000041 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.116136 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.116136 Jy ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=15.66 mas, bpa=-22.86 degrees ! Estimated noise=1316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526401 Jy ! Component: 100 - total flux cleaned = 0.00754948 Jy ! Component: 150 - total flux cleaned = 0.00856055 Jy ! Component: 200 - total flux cleaned = 0.00869621 Jy ! Total flux subtracted in 200 components = 0.00869621 Jy ! Clean residual min=-0.003523 max=0.002795 Jy/beam ! Clean residual mean=-0.000045 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.124832 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.124832 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.18 mas, bmaj=34.92 mas, bpa=-10.65 degrees ! Estimated noise=1616.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597232 Jy ! Component: 100 - total flux cleaned = 0.000641975 Jy ! Component: 150 - total flux cleaned = 0.000702651 Jy ! Component: 200 - total flux cleaned = 0.000738763 Jy ! Total flux subtracted in 200 components = 0.000738763 Jy ! Clean residual min=-0.003246 max=0.002504 Jy/beam ! Clean residual mean=-0.000067 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.125571 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.72741e-05 Jy ! Component: 100 - total flux cleaned = 7.53019e-05 Jy ! Component: 150 - total flux cleaned = 0.000113798 Jy ! Component: 200 - total flux cleaned = 0.000137541 Jy ! Total flux subtracted in 200 components = 0.000137541 Jy ! Clean residual min=-0.003209 max=0.002516 Jy/beam ! Clean residual mean=-0.000065 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.125708 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.125708 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=15.66 mas, bpa=-22.86 degrees ! Estimated noise=1316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78068e-05 Jy ! Component: 100 - total flux cleaned = 1.03439e-05 Jy ! Component: 150 - total flux cleaned = 3.25853e-05 Jy ! Component: 200 - total flux cleaned = 7.38732e-05 Jy ! Total flux subtracted in 200 components = 7.38732e-05 Jy ! Clean residual min=-0.003405 max=0.002964 Jy/beam ! Clean residual mean=-0.000039 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.125782 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.125782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115094Jy sigma=0.000694 ! Fit after self-cal, rms=0.115069Jy sigma=0.000694 wmodel J1555-4150_S_2017_10_21_pus_map.mod ! Writing 82 model components to file: J1555-4150_S_2017_10_21_pus_map.mod wobs J1555-4150_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1555-4150_S_2017_10_21_pus_uvs.fits wwins J1555-4150_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1555-4150_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107744 Jy ! Component: 100 - total flux cleaned = -0.00183161 Jy ! Component: 150 - total flux cleaned = -0.0020601 Jy ! Component: 200 - total flux cleaned = -0.002227 Jy ! Component: 250 - total flux cleaned = -0.00238092 Jy ! Component: 300 - total flux cleaned = -0.00252654 Jy ! Component: 350 - total flux cleaned = -0.00263117 Jy ! Component: 400 - total flux cleaned = -0.00279566 Jy ! Component: 450 - total flux cleaned = -0.00295108 Jy ! Component: 500 - total flux cleaned = -0.00309953 Jy ! Component: 550 - total flux cleaned = -0.00321371 Jy ! Component: 600 - total flux cleaned = -0.0033794 Jy ! Component: 650 - total flux cleaned = -0.00362171 Jy ! Component: 700 - total flux cleaned = -0.00385622 Jy ! Component: 750 - total flux cleaned = -0.00410861 Jy ! Component: 800 - total flux cleaned = -0.00423143 Jy ! Component: 850 - total flux cleaned = -0.00442231 Jy ! Component: 900 - total flux cleaned = -0.00463154 Jy ! Component: 950 - total flux cleaned = -0.00481318 Jy ! Component: 1000 - total flux cleaned = -0.00503445 Jy ! Component: 1050 - total flux cleaned = -0.00525042 Jy ! Component: 1100 - total flux cleaned = -0.00544064 Jy ! Component: 1150 - total flux cleaned = -0.00573034 Jy ! Component: 1200 - total flux cleaned = -0.00597421 Jy ! Component: 1250 - total flux cleaned = -0.00625378 Jy ! Component: 1300 - total flux cleaned = -0.00648899 Jy ! Component: 1350 - total flux cleaned = -0.00672007 Jy ! Component: 1400 - total flux cleaned = -0.00687161 Jy ! Component: 1450 - total flux cleaned = -0.00700245 Jy ! Component: 1500 - total flux cleaned = -0.00713147 Jy ! Component: 1550 - total flux cleaned = -0.00724069 Jy ! Component: 1600 - total flux cleaned = -0.00741997 Jy ! Component: 1650 - total flux cleaned = -0.00752584 Jy ! Component: 1700 - total flux cleaned = -0.00766552 Jy ! Component: 1750 - total flux cleaned = -0.00783817 Jy ! Component: 1800 - total flux cleaned = -0.00799211 Jy ! Component: 1850 - total flux cleaned = -0.00812767 Jy ! Component: 1900 - total flux cleaned = -0.00832886 Jy ! Component: 1950 - total flux cleaned = -0.00849475 Jy ! Component: 2000 - total flux cleaned = -0.00865909 Jy ! Component: 2050 - total flux cleaned = -0.00885442 Jy ! Component: 2100 - total flux cleaned = -0.00899941 Jy ! Component: 2150 - total flux cleaned = -0.00915934 Jy ! Component: 2200 - total flux cleaned = -0.00930192 Jy ! Component: 2250 - total flux cleaned = -0.00950605 Jy ! Component: 2300 - total flux cleaned = -0.00964628 Jy ! Component: 2350 - total flux cleaned = -0.00984727 Jy ! Component: 2400 - total flux cleaned = -0.010016 Jy ! Component: 2450 - total flux cleaned = -0.010214 Jy ! Component: 2500 - total flux cleaned = -0.0103803 Jy ! Component: 2550 - total flux cleaned = -0.0105605 Jy ! Component: 2600 - total flux cleaned = -0.0107096 Jy ! Component: 2650 - total flux cleaned = -0.0109021 Jy ! Component: 2700 - total flux cleaned = -0.0110639 Jy ! Component: 2750 - total flux cleaned = -0.0112395 Jy ! Component: 2800 - total flux cleaned = -0.0113994 Jy ! Component: 2850 - total flux cleaned = -0.0115585 Jy ! Component: 2900 - total flux cleaned = -0.0116881 Jy ! Component: 2950 - total flux cleaned = -0.01186 Jy ! Component: 3000 - total flux cleaned = -0.012031 Jy ! Component: 3050 - total flux cleaned = -0.0122011 Jy ! Component: 3100 - total flux cleaned = -0.0123706 Jy ! Component: 3150 - total flux cleaned = -0.0125254 Jy ! Component: 3200 - total flux cleaned = -0.0126657 Jy ! Component: 3250 - total flux cleaned = -0.0128616 Jy ! Component: 3300 - total flux cleaned = -0.0130432 Jy ! Component: 3350 - total flux cleaned = -0.0132103 Jy ! Component: 3400 - total flux cleaned = -0.0133634 Jy ! Component: 3450 - total flux cleaned = -0.0135301 Jy ! Component: 3500 - total flux cleaned = -0.0137106 Jy ! Component: 3550 - total flux cleaned = -0.0138771 Jy ! Component: 3600 - total flux cleaned = -0.0140711 Jy ! Component: 3650 - total flux cleaned = -0.0142373 Jy ! Component: 3700 - total flux cleaned = -0.0144034 Jy ! Component: 3750 - total flux cleaned = -0.0145694 Jy ! Component: 3800 - total flux cleaned = -0.0147629 Jy ! Component: 3850 - total flux cleaned = -0.0149425 Jy ! Component: 3900 - total flux cleaned = -0.0150807 Jy ! Component: 3950 - total flux cleaned = -0.0152465 Jy ! Component: 4000 - total flux cleaned = -0.0153846 Jy ! Component: 4050 - total flux cleaned = -0.0155781 Jy ! Total flux subtracted in 4096 components = -0.0157301 Jy ! Clean residual min=-0.000881 max=0.000868 Jy/beam ! Clean residual mean=-0.000024 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.110052 Jy keep ! Adding 203 model components to the UV plane model. ! The established model now contains 284 components and 0.110052 Jy ![Exited script file: muppet] wmap "J1555-4150_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 15.66 at -22.86 degrees (North through East) ! Clean map min=-0.0026868 max=0.096379 Jy/beam ! Writing clean map to FITS file: J1555-4150_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0963793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254791 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.793089 0.793089 1.58618 3.17236 6.34471 12.6894 25.3788 50.7577 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.448 x 15.66 at -22.86 degrees (North through East) ! Clean map min=-0.0026868 max=0.096379 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1555-4150_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:30 2019