! Started logfile: J1555-2508_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:55 2019 obs J1555-2508_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1555-2508_S_2017_01_21_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.7591 visibilities/baseline/integration-bin. ! Found source: J1555-2508 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 6340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1555-2508_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.869226Jy sigma=0.004789 ! Fit after self-cal, rms=0.848361Jy sigma=0.004701 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.018 mas, bmaj=6.516 mas, bpa=-6.979 degrees ! Estimated noise=3090.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124221 Jy ! Component: 100 - total flux cleaned = 0.154318 Jy ! Total flux subtracted in 100 components = 0.154318 Jy ! Clean residual min=-0.015486 max=0.020120 Jy/beam ! Clean residual mean=-0.000018 rms=0.004037 Jy/beam ! Combined flux in latest and established models = 0.154318 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.154318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148377Jy sigma=0.000691 ! Fit after self-cal, rms=0.148339Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=7.073 mas, bpa=-6.427 degrees ! Estimated noise=1769.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209125 Jy ! Component: 100 - total flux cleaned = 0.0309507 Jy ! Component: 150 - total flux cleaned = 0.036277 Jy ! Component: 200 - total flux cleaned = 0.0392636 Jy ! Total flux subtracted in 200 components = 0.0392636 Jy ! Clean residual min=-0.009634 max=0.017564 Jy/beam ! Clean residual mean=0.000015 rms=0.003431 Jy/beam ! Combined flux in latest and established models = 0.193582 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.193582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146876Jy sigma=0.000666 ! Fit after self-cal, rms=0.146820Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.98 LA 0.99 ! MK 0.99 NL 0.93 OV 1.61 PT 0.94 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.09 LA 0.97 ! MK 1.03 NL 0.97 OV 1.80 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.04 LA 0.92 ! MK 1.04 NL 0.92 OV 1.47 PT 0.90 ! SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 LA 0.79 ! MK 0.97 NL 1.00* OV 1.43 PT 0.91 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.146820Jy sigma=0.000666 ! Fit after self-cal, rms=0.181126Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=7.071 mas, bpa=-6.555 degrees ! Estimated noise=1763.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218062 Jy ! Component: 100 - total flux cleaned = -0.00026318 Jy ! Component: 150 - total flux cleaned = -0.000399078 Jy ! Component: 200 - total flux cleaned = -0.00052222 Jy ! Total flux subtracted in 200 components = -0.00052222 Jy ! Clean residual min=-0.003832 max=0.005398 Jy/beam ! Clean residual mean=-0.000004 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.19306 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.19306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181065Jy sigma=0.000649 ! Fit after self-cal, rms=0.181863Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181863Jy sigma=0.000649 ! Fit after self-cal, rms=0.183889Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=7.068 mas, bpa=-6.471 degrees ! Estimated noise=1763.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.79446e-05 Jy ! Component: 100 - total flux cleaned = -0.000325231 Jy ! Component: 150 - total flux cleaned = -0.000475817 Jy ! Component: 200 - total flux cleaned = -0.000521082 Jy ! Total flux subtracted in 200 components = -0.000521082 Jy ! Clean residual min=-0.003702 max=0.004854 Jy/beam ! Clean residual mean=-0.000004 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.192539 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.192539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183854Jy sigma=0.000648 ! Fit after self-cal, rms=0.183865Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430301 Jy ! Component: 100 - total flux cleaned = 0.00423577 Jy ! Component: 150 - total flux cleaned = 0.00388704 Jy ! Component: 200 - total flux cleaned = 0.00370495 Jy ! Total flux subtracted in 200 components = 0.00370495 Jy ! Clean residual min=-0.003985 max=0.004038 Jy/beam ! Clean residual mean=-0.000003 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.196244 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.196244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183694Jy sigma=0.000648 ! Fit after self-cal, rms=0.183652Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183652Jy sigma=0.000647 ! Fit after self-cal, rms=0.182764Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=7.055 mas, bpa=-6.369 degrees ! Estimated noise=1757.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112673 Jy ! Component: 100 - total flux cleaned = 0.000982057 Jy ! Component: 150 - total flux cleaned = 0.00080312 Jy ! Component: 200 - total flux cleaned = 0.000598674 Jy ! Total flux subtracted in 200 components = 0.000598674 Jy ! Clean residual min=-0.003990 max=0.003828 Jy/beam ! Clean residual mean=-0.000003 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.196842 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.196842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182718Jy sigma=0.000647 ! Fit after self-cal, rms=0.182716Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274991 Jy ! Component: 100 - total flux cleaned = 0.000121353 Jy ! Component: 150 - total flux cleaned = -0.000126407 Jy ! Component: 200 - total flux cleaned = -0.000257367 Jy ! Total flux subtracted in 200 components = -0.000257367 Jy ! Clean residual min=-0.004093 max=0.003790 Jy/beam ! Clean residual mean=-0.000004 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.196585 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.196585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182691Jy sigma=0.000647 ! Fit after self-cal, rms=0.182689Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182689Jy sigma=0.000647 ! Fit after self-cal, rms=0.182243Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.536 mas, bmaj=16.14 mas, bpa=3.847 degrees ! Estimated noise=2535.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133856 Jy ! Component: 100 - total flux cleaned = 0.000334741 Jy ! Component: 150 - total flux cleaned = 0.000340144 Jy ! Component: 200 - total flux cleaned = 0.000257345 Jy ! Total flux subtracted in 200 components = 0.000257345 Jy ! Clean residual min=-0.004558 max=0.003168 Jy/beam ! Clean residual mean=-0.000009 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.196842 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.196842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182245Jy sigma=0.000647 ! Fit after self-cal, rms=0.182214Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137075 Jy ! Component: 100 - total flux cleaned = -6.93268e-05 Jy ! Component: 150 - total flux cleaned = 3.48408e-05 Jy ! Component: 200 - total flux cleaned = 0.000126639 Jy ! Total flux subtracted in 200 components = 0.000126639 Jy ! Clean residual min=-0.004609 max=0.003170 Jy/beam ! Clean residual mean=-0.000009 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.196969 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.196969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182220Jy sigma=0.000647 ! Fit after self-cal, rms=0.182198Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=7.055 mas, bpa=-6.324 degrees ! Estimated noise=1756.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.598 x 7.055 at -6.324 degrees (North through East) ! Clean map min=-0.003983 max=0.16741 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.036 mas, bmaj=6.511 mas, bpa=-7.049 degrees ! Estimated noise=3096.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123662 Jy ! Component: 100 - total flux cleaned = 0.154414 Jy ! Component: 150 - total flux cleaned = 0.169103 Jy ! Component: 200 - total flux cleaned = 0.178371 Jy ! Total flux subtracted in 200 components = 0.178371 Jy ! Clean residual min=-0.010151 max=0.007872 Jy/beam ! Clean residual mean=-0.000013 rms=0.002228 Jy/beam ! Combined flux in latest and established models = 0.178371 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.178371 Jy ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=7.055 mas, bpa=-6.324 degrees ! Estimated noise=1756.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998904 Jy ! Component: 100 - total flux cleaned = 0.0152119 Jy ! Component: 150 - total flux cleaned = 0.0185613 Jy ! Component: 200 - total flux cleaned = 0.0191244 Jy ! Total flux subtracted in 200 components = 0.0191244 Jy ! Clean residual min=-0.004866 max=0.004652 Jy/beam ! Clean residual mean=-0.000005 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.197496 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 39 components and 0.197496 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.536 mas, bmaj=16.14 mas, bpa=3.847 degrees ! Estimated noise=2535.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116665 Jy ! Component: 100 - total flux cleaned = 0.0011718 Jy ! Component: 150 - total flux cleaned = 0.00102493 Jy ! Component: 200 - total flux cleaned = 0.00089733 Jy ! Total flux subtracted in 200 components = 0.00089733 Jy ! Clean residual min=-0.005131 max=0.003926 Jy/beam ! Clean residual mean=-0.000009 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.198393 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114029 Jy ! Component: 100 - total flux cleaned = -0.000209896 Jy ! Component: 150 - total flux cleaned = -0.000209736 Jy ! Component: 200 - total flux cleaned = -0.000249141 Jy ! Total flux subtracted in 200 components = -0.000249141 Jy ! Clean residual min=-0.004889 max=0.003533 Jy/beam ! Clean residual mean=-0.000008 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.198144 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 0.198144 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=7.055 mas, bpa=-6.324 degrees ! Estimated noise=1756.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292718 Jy ! Component: 100 - total flux cleaned = 0.000292215 Jy ! Component: 150 - total flux cleaned = 0.000359528 Jy ! Component: 200 - total flux cleaned = 0.000298062 Jy ! Total flux subtracted in 200 components = 0.000298062 Jy ! Clean residual min=-0.004369 max=0.004240 Jy/beam ! Clean residual mean=-0.000003 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.198442 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.198442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182270Jy sigma=0.000648 ! Fit after self-cal, rms=0.182264Jy sigma=0.000648 wmodel J1555-2508_S_2017_01_21_pus_map.mod ! Writing 84 model components to file: J1555-2508_S_2017_01_21_pus_map.mod wobs J1555-2508_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1555-2508_S_2017_01_21_pus_uvs.fits wwins J1555-2508_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1555-2508_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.96272e-05 Jy ! Component: 100 - total flux cleaned = 0.000244126 Jy ! Component: 150 - total flux cleaned = 0.000673474 Jy ! Component: 200 - total flux cleaned = 0.00128984 Jy ! Component: 250 - total flux cleaned = 0.00191151 Jy ! Component: 300 - total flux cleaned = 0.00244668 Jy ! Component: 350 - total flux cleaned = 0.00286375 Jy ! Component: 400 - total flux cleaned = 0.00303989 Jy ! Component: 450 - total flux cleaned = 0.00321015 Jy ! Component: 500 - total flux cleaned = 0.00353722 Jy ! Component: 550 - total flux cleaned = 0.00365592 Jy ! Component: 600 - total flux cleaned = 0.00365582 Jy ! Component: 650 - total flux cleaned = 0.00372997 Jy ! Component: 700 - total flux cleaned = 0.00369355 Jy ! Component: 750 - total flux cleaned = 0.00390392 Jy ! Component: 800 - total flux cleaned = 0.0040063 Jy ! Component: 850 - total flux cleaned = 0.0042081 Jy ! Component: 900 - total flux cleaned = 0.00430677 Jy ! Component: 950 - total flux cleaned = 0.00456554 Jy ! Component: 1000 - total flux cleaned = 0.00456557 Jy ! Component: 1050 - total flux cleaned = 0.00465855 Jy ! Component: 1100 - total flux cleaned = 0.0046889 Jy ! Component: 1150 - total flux cleaned = 0.0047494 Jy ! Component: 1200 - total flux cleaned = 0.00468933 Jy ! Component: 1250 - total flux cleaned = 0.00468946 Jy ! Component: 1300 - total flux cleaned = 0.00474751 Jy ! Component: 1350 - total flux cleaned = 0.00474765 Jy ! Component: 1400 - total flux cleaned = 0.00477627 Jy ! Component: 1450 - total flux cleaned = 0.00488825 Jy ! Component: 1500 - total flux cleaned = 0.00497081 Jy ! Component: 1550 - total flux cleaned = 0.00505213 Jy ! Component: 1600 - total flux cleaned = 0.00505198 Jy ! Component: 1650 - total flux cleaned = 0.00515843 Jy ! Component: 1700 - total flux cleaned = 0.00521132 Jy ! Component: 1750 - total flux cleaned = 0.00528993 Jy ! Component: 1800 - total flux cleaned = 0.00534175 Jy ! Component: 1850 - total flux cleaned = 0.00541896 Jy ! Component: 1900 - total flux cleaned = 0.00536811 Jy ! Component: 1950 - total flux cleaned = 0.0054694 Jy ! Component: 2000 - total flux cleaned = 0.00551959 Jy ! Component: 2050 - total flux cleaned = 0.00551966 Jy ! Component: 2100 - total flux cleaned = 0.00546992 Jy ! Component: 2150 - total flux cleaned = 0.00537171 Jy ! Component: 2200 - total flux cleaned = 0.00527399 Jy ! Component: 2250 - total flux cleaned = 0.00517698 Jy ! Component: 2300 - total flux cleaned = 0.00515268 Jy ! Component: 2350 - total flux cleaned = 0.00500866 Jy ! Component: 2400 - total flux cleaned = 0.00488932 Jy ! Component: 2450 - total flux cleaned = 0.00477111 Jy ! Component: 2500 - total flux cleaned = 0.00472389 Jy ! Component: 2550 - total flux cleaned = 0.00460677 Jy ! Component: 2600 - total flux cleaned = 0.00449013 Jy ! Component: 2650 - total flux cleaned = 0.00446694 Jy ! Component: 2700 - total flux cleaned = 0.00430538 Jy ! Component: 2750 - total flux cleaned = 0.00428251 Jy ! Component: 2800 - total flux cleaned = 0.00428214 Jy ! Component: 2850 - total flux cleaned = 0.00412247 Jy ! Component: 2900 - total flux cleaned = 0.0040543 Jy ! Component: 2950 - total flux cleaned = 0.00396376 Jy ! Component: 3000 - total flux cleaned = 0.00394116 Jy ! Component: 3050 - total flux cleaned = 0.00389608 Jy ! Component: 3100 - total flux cleaned = 0.00380633 Jy ! Component: 3150 - total flux cleaned = 0.00371684 Jy ! Component: 3200 - total flux cleaned = 0.00362758 Jy ! Component: 3250 - total flux cleaned = 0.00358288 Jy ! Component: 3300 - total flux cleaned = 0.00353841 Jy ! Component: 3350 - total flux cleaned = 0.00351632 Jy ! Component: 3400 - total flux cleaned = 0.00342726 Jy ! Component: 3450 - total flux cleaned = 0.00336055 Jy ! Component: 3500 - total flux cleaned = 0.00333829 Jy ! Component: 3550 - total flux cleaned = 0.00320435 Jy ! Component: 3600 - total flux cleaned = 0.00318214 Jy ! Component: 3650 - total flux cleaned = 0.0030705 Jy ! Component: 3700 - total flux cleaned = 0.00300358 Jy ! Component: 3750 - total flux cleaned = 0.00300349 Jy ! Component: 3800 - total flux cleaned = 0.00298094 Jy ! Component: 3850 - total flux cleaned = 0.00295852 Jy ! Component: 3900 - total flux cleaned = 0.00298121 Jy ! Component: 3950 - total flux cleaned = 0.00293583 Jy ! Component: 4000 - total flux cleaned = 0.00293588 Jy ! Component: 4050 - total flux cleaned = 0.00295873 Jy ! Total flux subtracted in 4096 components = 0.00291297 Jy ! Clean residual min=-0.001391 max=0.001329 Jy/beam ! Clean residual mean=0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.201355 Jy keep ! Adding 211 model components to the UV plane model. ! The established model now contains 295 components and 0.201355 Jy ![Exited script file: muppet] wmap "J1555-2508_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.598 x 7.055 at -6.324 degrees (North through East) ! Clean map min=-0.0026762 max=0.16555 Jy/beam ! Writing clean map to FITS file: J1555-2508_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.16555 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000378234 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.685415 0.685415 1.37083 2.74166 5.48332 10.9666 21.9333 43.8666 87.7331 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.598 x 7.055 at -6.324 degrees (North through East) ! Clean map min=-0.0026762 max=0.16555 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1555-2508_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:59 2019