! Started logfile: J1554-2704_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:51 2019 obs J1554-2704_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1554-2704_S_2017_01_21_pus_uva.fits ! AN table 1: 48 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759259 visibilities/baseline/integration-bin. ! Found source: J1554-2704 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 5248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1554-2704_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.844447Jy sigma=0.004502 ! Fit after self-cal, rms=0.823244Jy sigma=0.004400 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.172 mas, bmaj=6.224 mas, bpa=-5.702 degrees ! Estimated noise=2687.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14897 Jy ! Component: 100 - total flux cleaned = 0.210249 Jy ! Total flux subtracted in 100 components = 0.210249 Jy ! Clean residual min=-0.028815 max=0.037371 Jy/beam ! Clean residual mean=-0.000093 rms=0.009069 Jy/beam ! Combined flux in latest and established models = 0.210249 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.210249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169452Jy sigma=0.000842 ! Fit after self-cal, rms=0.169059Jy sigma=0.000839 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=7.013 mas, bpa=-6.168 degrees ! Estimated noise=2023.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438485 Jy ! Component: 100 - total flux cleaned = 0.0674829 Jy ! Component: 150 - total flux cleaned = 0.0811487 Jy ! Component: 200 - total flux cleaned = 0.084551 Jy ! Total flux subtracted in 200 components = 0.084551 Jy ! Clean residual min=-0.025817 max=0.034048 Jy/beam ! Clean residual mean=-0.000087 rms=0.008059 Jy/beam ! Combined flux in latest and established models = 0.2948 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.2948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161913Jy sigma=0.000747 ! Fit after self-cal, rms=0.161880Jy sigma=0.000746 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.99 LA 0.95 ! MK 1.06 NL 0.92 OV 1.66 PT 0.89 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.04 LA 0.92 ! MK 0.94 NL 0.90 OV 1.81 PT 0.87 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.05 LA 0.91 ! MK 0.93 NL 0.92 OV 1.75 PT 0.88 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.06 LA 1.00* ! MK 0.81 NL 1.00* OV 1.78 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.161880Jy sigma=0.000746 ! Fit after self-cal, rms=0.203429Jy sigma=0.000704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=6.95 mas, bpa=-6.658 degrees ! Estimated noise=1961.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.44257e-05 Jy ! Component: 100 - total flux cleaned = 0.000731561 Jy ! Component: 150 - total flux cleaned = 0.00115193 Jy ! Component: 200 - total flux cleaned = 0.00154235 Jy ! Total flux subtracted in 200 components = 0.00154235 Jy ! Clean residual min=-0.016452 max=0.019263 Jy/beam ! Clean residual mean=-0.000040 rms=0.005038 Jy/beam ! Combined flux in latest and established models = 0.296343 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.296343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202984Jy sigma=0.000700 ! Fit after self-cal, rms=0.204330Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204330Jy sigma=0.000699 ! Fit after self-cal, rms=0.206281Jy sigma=0.000698 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=6.95 mas, bpa=-6.255 degrees ! Estimated noise=1968.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000933387 Jy ! Component: 100 - total flux cleaned = -0.00057602 Jy ! Component: 150 - total flux cleaned = -8.05839e-05 Jy ! Component: 200 - total flux cleaned = 7.5772e-05 Jy ! Total flux subtracted in 200 components = 7.5772e-05 Jy ! Clean residual min=-0.015868 max=0.018208 Jy/beam ! Clean residual mean=-0.000039 rms=0.004878 Jy/beam ! Combined flux in latest and established models = 0.296418 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.296418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205995Jy sigma=0.000696 ! Fit after self-cal, rms=0.206035Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275251 Jy ! Component: 100 - total flux cleaned = 0.000560803 Jy ! Component: 150 - total flux cleaned = 0.000826409 Jy ! Component: 200 - total flux cleaned = 0.00095607 Jy ! Total flux subtracted in 200 components = 0.00095607 Jy ! Clean residual min=-0.015449 max=0.017376 Jy/beam ! Clean residual mean=-0.000038 rms=0.004795 Jy/beam ! Combined flux in latest and established models = 0.297374 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.297374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205859Jy sigma=0.000694 ! Fit after self-cal, rms=0.205873Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205873Jy sigma=0.000694 ! Fit after self-cal, rms=0.204051Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=6.956 mas, bpa=-5.934 degrees ! Estimated noise=1963.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199518 Jy ! Component: 100 - total flux cleaned = -0.00163836 Jy ! Component: 150 - total flux cleaned = -0.0014141 Jy ! Component: 200 - total flux cleaned = -0.00120498 Jy ! Total flux subtracted in 200 components = -0.00120498 Jy ! Clean residual min=-0.015190 max=0.016342 Jy/beam ! Clean residual mean=-0.000035 rms=0.004691 Jy/beam ! Combined flux in latest and established models = 0.296169 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.296169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203910Jy sigma=0.000693 ! Fit after self-cal, rms=0.203912Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031748 Jy ! Component: 100 - total flux cleaned = 0.000611349 Jy ! Component: 150 - total flux cleaned = 0.000796916 Jy ! Component: 200 - total flux cleaned = 0.0010635 Jy ! Total flux subtracted in 200 components = 0.0010635 Jy ! Clean residual min=-0.015042 max=0.016080 Jy/beam ! Clean residual mean=-0.000033 rms=0.004650 Jy/beam ! Combined flux in latest and established models = 0.297233 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.297233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203830Jy sigma=0.000692 ! Fit after self-cal, rms=0.203844Jy sigma=0.000692 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203844Jy sigma=0.000692 ! Fit after self-cal, rms=0.202556Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.434 mas, bmaj=16.17 mas, bpa=4.195 degrees ! Estimated noise=2862.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202338 Jy ! Component: 100 - total flux cleaned = 0.00176709 Jy ! Component: 150 - total flux cleaned = 0.00166817 Jy ! Component: 200 - total flux cleaned = 0.00158191 Jy ! Total flux subtracted in 200 components = 0.00158191 Jy ! Clean residual min=-0.029454 max=0.028065 Jy/beam ! Clean residual mean=-0.000069 rms=0.010421 Jy/beam ! Combined flux in latest and established models = 0.298815 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.298815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202582Jy sigma=0.000693 ! Fit after self-cal, rms=0.202526Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201154 Jy ! Component: 100 - total flux cleaned = 0.000197808 Jy ! Component: 150 - total flux cleaned = 0.00011658 Jy ! Component: 200 - total flux cleaned = -7.56209e-06 Jy ! Total flux subtracted in 200 components = -7.56209e-06 Jy ! Clean residual min=-0.029561 max=0.028121 Jy/beam ! Clean residual mean=-0.000068 rms=0.010420 Jy/beam ! Combined flux in latest and established models = 0.298807 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.298807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202595Jy sigma=0.000694 ! Fit after self-cal, rms=0.202532Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=6.964 mas, bpa=-5.675 degrees ! Estimated noise=1958.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.571 x 6.964 at -5.675 degrees (North through East) ! Clean map min=-0.015314 max=0.19284 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.19 mas, bmaj=6.199 mas, bpa=-5.321 degrees ! Estimated noise=2595.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142566 Jy ! Component: 100 - total flux cleaned = 0.203487 Jy ! Component: 150 - total flux cleaned = 0.236965 Jy ! Component: 200 - total flux cleaned = 0.257392 Jy ! Total flux subtracted in 200 components = 0.257392 Jy ! Clean residual min=-0.017777 max=0.021808 Jy/beam ! Clean residual mean=-0.000037 rms=0.005276 Jy/beam ! Combined flux in latest and established models = 0.257392 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.257392 Jy ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=6.964 mas, bpa=-5.675 degrees ! Estimated noise=1958.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176968 Jy ! Component: 100 - total flux cleaned = 0.0247513 Jy ! Component: 150 - total flux cleaned = 0.0271449 Jy ! Component: 200 - total flux cleaned = 0.0288891 Jy ! Total flux subtracted in 200 components = 0.0288891 Jy ! Clean residual min=-0.016677 max=0.018487 Jy/beam ! Clean residual mean=-0.000048 rms=0.005080 Jy/beam ! Combined flux in latest and established models = 0.286281 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.286281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.434 mas, bmaj=16.17 mas, bpa=4.195 degrees ! Estimated noise=2862.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107267 Jy ! Component: 100 - total flux cleaned = 0.0107309 Jy ! Component: 150 - total flux cleaned = 0.0107365 Jy ! Component: 200 - total flux cleaned = 0.0109076 Jy ! Total flux subtracted in 200 components = 0.0109076 Jy ! Clean residual min=-0.030672 max=0.028460 Jy/beam ! Clean residual mean=-0.000074 rms=0.010488 Jy/beam ! Combined flux in latest and established models = 0.297188 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150897 Jy ! Component: 100 - total flux cleaned = 0.000285194 Jy ! Component: 150 - total flux cleaned = 0.000407728 Jy ! Component: 200 - total flux cleaned = 0.000517918 Jy ! Total flux subtracted in 200 components = 0.000517918 Jy ! Clean residual min=-0.030087 max=0.028271 Jy/beam ! Clean residual mean=-0.000072 rms=0.010449 Jy/beam ! Combined flux in latest and established models = 0.297706 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.297706 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=6.964 mas, bpa=-5.675 degrees ! Estimated noise=1958.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00628337 Jy ! Component: 100 - total flux cleaned = -0.00551808 Jy ! Component: 150 - total flux cleaned = -0.00492397 Jy ! Component: 200 - total flux cleaned = -0.0042625 Jy ! Total flux subtracted in 200 components = -0.0042625 Jy ! Clean residual min=-0.015592 max=0.017304 Jy/beam ! Clean residual mean=-0.000034 rms=0.004719 Jy/beam ! Combined flux in latest and established models = 0.293444 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 56 components and 0.293444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202561Jy sigma=0.000694 ! Fit after self-cal, rms=0.202554Jy sigma=0.000694 wmodel J1554-2704_S_2017_01_21_pus_map.mod ! Writing 56 model components to file: J1554-2704_S_2017_01_21_pus_map.mod wobs J1554-2704_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1554-2704_S_2017_01_21_pus_uvs.fits wwins J1554-2704_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1554-2704_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433851 Jy ! Component: 100 - total flux cleaned = 0.00608802 Jy ! Component: 150 - total flux cleaned = 0.00632814 Jy ! Component: 200 - total flux cleaned = 0.0061278 Jy ! Component: 250 - total flux cleaned = 0.00538329 Jy ! Component: 300 - total flux cleaned = 0.00504846 Jy ! Component: 350 - total flux cleaned = 0.0047354 Jy ! Component: 400 - total flux cleaned = 0.00444475 Jy ! Component: 450 - total flux cleaned = 0.00403943 Jy ! Component: 500 - total flux cleaned = 0.00379178 Jy ! Component: 550 - total flux cleaned = 0.00355748 Jy ! Component: 600 - total flux cleaned = 0.00367352 Jy ! Component: 650 - total flux cleaned = 0.0040939 Jy ! Component: 700 - total flux cleaned = 0.0042921 Jy ! Component: 750 - total flux cleaned = 0.00475176 Jy ! Component: 800 - total flux cleaned = 0.00509623 Jy ! Component: 850 - total flux cleaned = 0.0055078 Jy ! Component: 900 - total flux cleaned = 0.00590034 Jy ! Component: 950 - total flux cleaned = 0.00635231 Jy ! Component: 1000 - total flux cleaned = 0.00670629 Jy ! Component: 1050 - total flux cleaned = 0.00670598 Jy ! Component: 1100 - total flux cleaned = 0.00690069 Jy ! Component: 1150 - total flux cleaned = 0.00708749 Jy ! Component: 1200 - total flux cleaned = 0.00726687 Jy ! Component: 1250 - total flux cleaned = 0.00755899 Jy ! Component: 1300 - total flux cleaned = 0.00795544 Jy ! Component: 1350 - total flux cleaned = 0.00822962 Jy ! Component: 1400 - total flux cleaned = 0.00849768 Jy ! Component: 1450 - total flux cleaned = 0.00870736 Jy ! Component: 1500 - total flux cleaned = 0.00880944 Jy ! Component: 1550 - total flux cleaned = 0.00875877 Jy ! Component: 1600 - total flux cleaned = 0.00885766 Jy ! Component: 1650 - total flux cleaned = 0.00890605 Jy ! Component: 1700 - total flux cleaned = 0.00890605 Jy ! Component: 1750 - total flux cleaned = 0.00895357 Jy ! Component: 1800 - total flux cleaned = 0.00895354 Jy ! Component: 1850 - total flux cleaned = 0.00908778 Jy ! Component: 1900 - total flux cleaned = 0.00926532 Jy ! Component: 1950 - total flux cleaned = 0.00952855 Jy ! Component: 2000 - total flux cleaned = 0.0097019 Jy ! Component: 2050 - total flux cleaned = 0.0100025 Jy ! Component: 2100 - total flux cleaned = 0.01013 Jy ! Component: 2150 - total flux cleaned = 0.0102986 Jy ! Component: 2200 - total flux cleaned = 0.0105082 Jy ! Component: 2250 - total flux cleaned = 0.0107167 Jy ! Component: 2300 - total flux cleaned = 0.0108825 Jy ! Component: 2350 - total flux cleaned = 0.0109652 Jy ! Component: 2400 - total flux cleaned = 0.0110474 Jy ! Component: 2450 - total flux cleaned = 0.0110886 Jy ! Component: 2500 - total flux cleaned = 0.0110886 Jy ! Component: 2550 - total flux cleaned = 0.0112118 Jy ! Component: 2600 - total flux cleaned = 0.0112117 Jy ! Component: 2650 - total flux cleaned = 0.011334 Jy ! Component: 2700 - total flux cleaned = 0.0113747 Jy ! Component: 2750 - total flux cleaned = 0.0114564 Jy ! Component: 2800 - total flux cleaned = 0.011538 Jy ! Component: 2850 - total flux cleaned = 0.011497 Jy ! Component: 2900 - total flux cleaned = 0.0116197 Jy ! Component: 2950 - total flux cleaned = 0.0117015 Jy ! Component: 3000 - total flux cleaned = 0.0117013 Jy ! Component: 3050 - total flux cleaned = 0.0117424 Jy ! Component: 3100 - total flux cleaned = 0.0117427 Jy ! Component: 3150 - total flux cleaned = 0.0117426 Jy ! Component: 3200 - total flux cleaned = 0.0117426 Jy ! Component: 3250 - total flux cleaned = 0.0116601 Jy ! Component: 3300 - total flux cleaned = 0.01166 Jy ! Component: 3350 - total flux cleaned = 0.0116599 Jy ! Component: 3400 - total flux cleaned = 0.0115762 Jy ! Component: 3450 - total flux cleaned = 0.0115341 Jy ! Component: 3500 - total flux cleaned = 0.0114494 Jy ! Component: 3550 - total flux cleaned = 0.0112786 Jy ! Component: 3600 - total flux cleaned = 0.0112788 Jy ! Component: 3650 - total flux cleaned = 0.0111926 Jy ! Component: 3700 - total flux cleaned = 0.0111493 Jy ! Component: 3750 - total flux cleaned = 0.0111489 Jy ! Component: 3800 - total flux cleaned = 0.0111935 Jy ! Component: 3850 - total flux cleaned = 0.0111046 Jy ! Component: 3900 - total flux cleaned = 0.0111045 Jy ! Component: 3950 - total flux cleaned = 0.0111047 Jy ! Component: 4000 - total flux cleaned = 0.0111508 Jy ! Component: 4050 - total flux cleaned = 0.0111504 Jy ! Total flux subtracted in 4096 components = 0.0110574 Jy ! Clean residual min=-0.002685 max=0.002775 Jy/beam ! Clean residual mean=0.000003 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.304501 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 341 components and 0.304501 Jy ![Exited script file: muppet] wmap "J1554-2704_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.571 x 6.964 at -5.675 degrees (North through East) ! Clean map min=-0.0067753 max=0.18979 Jy/beam ! Writing clean map to FITS file: J1554-2704_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.189795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000763632 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20704 1.20704 2.41408 4.82815 9.65631 19.3126 38.6252 77.2505 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.189 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.571 x 6.964 at -5.675 degrees (North through East) ! Clean map min=-0.0067753 max=0.18979 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1554-2704_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:55 2019