! Started logfile: J1552-2425_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:46 2019 obs J1552-2425_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1552-2425_S_2017_01_21_pus_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.746032 visibilities/baseline/integration-bin. ! Found source: J1552-2425 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 3008 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1552-2425_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921403Jy sigma=0.005063 ! Fit after self-cal, rms=0.875119Jy sigma=0.004907 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.157 mas, bmaj=6.281 mas, bpa=-7.005 degrees ! Estimated noise=3056.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108836 Jy ! Component: 100 - total flux cleaned = 0.132621 Jy ! Total flux subtracted in 100 components = 0.132621 Jy ! Clean residual min=-0.011085 max=0.018578 Jy/beam ! Clean residual mean=-0.000005 rms=0.003269 Jy/beam ! Combined flux in latest and established models = 0.132621 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.132621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138479Jy sigma=0.000650 ! Fit after self-cal, rms=0.138539Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=7.041 mas, bpa=-6.055 degrees ! Estimated noise=2516.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154163 Jy ! Component: 100 - total flux cleaned = 0.0217349 Jy ! Component: 150 - total flux cleaned = 0.0240155 Jy ! Component: 200 - total flux cleaned = 0.0245781 Jy ! Total flux subtracted in 200 components = 0.0245781 Jy ! Clean residual min=-0.007559 max=0.008517 Jy/beam ! Clean residual mean=-0.000001 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.1572 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.1572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136663Jy sigma=0.000640 ! Fit after self-cal, rms=0.136765Jy sigma=0.000638 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.06 LA 1.05 ! MK 1.03 NL 0.96 OV 1.36 PT 1.01 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 LA 0.95 ! MK 1.02 NL 1.04 OV 1.36 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.06 LA 0.96 ! MK 1.07 NL 0.97 OV 1.02 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.08 LA 0.95 ! MK 0.87 NL 1.00* OV 1.12 PT 1.06 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.136765Jy sigma=0.000638 ! Fit after self-cal, rms=0.151441Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=6.979 mas, bpa=-5.918 degrees ! Estimated noise=2563.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000845648 Jy ! Component: 100 - total flux cleaned = -0.000752187 Jy ! Component: 150 - total flux cleaned = -0.000581009 Jy ! Component: 200 - total flux cleaned = -0.000426291 Jy ! Total flux subtracted in 200 components = -0.000426291 Jy ! Clean residual min=-0.006819 max=0.006582 Jy/beam ! Clean residual mean=-0.000015 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.156773 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.156773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151308Jy sigma=0.000634 ! Fit after self-cal, rms=0.151449Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151449Jy sigma=0.000634 ! Fit after self-cal, rms=0.153672Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=6.977 mas, bpa=-5.894 degrees ! Estimated noise=2578.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.71202e-05 Jy ! Component: 100 - total flux cleaned = 0.000123268 Jy ! Component: 150 - total flux cleaned = 0.0001934 Jy ! Component: 200 - total flux cleaned = 0.000127429 Jy ! Total flux subtracted in 200 components = 0.000127429 Jy ! Clean residual min=-0.006982 max=0.006346 Jy/beam ! Clean residual mean=-0.000015 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.156901 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.156901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153580Jy sigma=0.000634 ! Fit after self-cal, rms=0.153601Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000207812 Jy ! Component: 100 - total flux cleaned = -0.000269744 Jy ! Component: 150 - total flux cleaned = -0.00026879 Jy ! Component: 200 - total flux cleaned = -0.000327171 Jy ! Total flux subtracted in 200 components = -0.000327171 Jy ! Clean residual min=-0.006959 max=0.006264 Jy/beam ! Clean residual mean=-0.000016 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.156573 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.156573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153529Jy sigma=0.000633 ! Fit after self-cal, rms=0.153548Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153548Jy sigma=0.000633 ! Fit after self-cal, rms=0.154488Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=6.974 mas, bpa=-5.856 degrees ! Estimated noise=2586.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220505 Jy ! Component: 100 - total flux cleaned = 0.00022355 Jy ! Component: 150 - total flux cleaned = 0.000168426 Jy ! Component: 200 - total flux cleaned = 0.000117518 Jy ! Total flux subtracted in 200 components = 0.000117518 Jy ! Clean residual min=-0.006908 max=0.006152 Jy/beam ! Clean residual mean=-0.000016 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.156691 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.156691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154426Jy sigma=0.000633 ! Fit after self-cal, rms=0.154458Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111653 Jy ! Component: 100 - total flux cleaned = -0.000111032 Jy ! Component: 150 - total flux cleaned = -0.000212164 Jy ! Component: 200 - total flux cleaned = -0.000212319 Jy ! Total flux subtracted in 200 components = -0.000212319 Jy ! Clean residual min=-0.006894 max=0.006115 Jy/beam ! Clean residual mean=-0.000016 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.156479 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.156479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154406Jy sigma=0.000633 ! Fit after self-cal, rms=0.154428Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154428Jy sigma=0.000633 ! Fit after self-cal, rms=0.154772Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.559 mas, bmaj=15.82 mas, bpa=3.664 degrees ! Estimated noise=3786.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000418173 Jy ! Component: 100 - total flux cleaned = -0.000344105 Jy ! Component: 150 - total flux cleaned = -0.000398787 Jy ! Component: 200 - total flux cleaned = -0.000529156 Jy ! Total flux subtracted in 200 components = -0.000529156 Jy ! Clean residual min=-0.004456 max=0.006550 Jy/beam ! Clean residual mean=-0.000035 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.15595 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 0.15595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154765Jy sigma=0.000633 ! Fit after self-cal, rms=0.154813Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226323 Jy ! Component: 100 - total flux cleaned = -0.000328039 Jy ! Component: 150 - total flux cleaned = -0.000421165 Jy ! Component: 200 - total flux cleaned = -0.000504071 Jy ! Total flux subtracted in 200 components = -0.000504071 Jy ! Clean residual min=-0.004607 max=0.006503 Jy/beam ! Clean residual mean=-0.000036 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.155445 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.155445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154795Jy sigma=0.000633 ! Fit after self-cal, rms=0.154824Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.969 mas, bpa=-5.827 degrees ! Estimated noise=2591.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.595 x 6.969 at -5.827 degrees (North through East) ! Clean map min=-0.0064956 max=0.12667 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.165 mas, bmaj=6.219 mas, bpa=-7.049 degrees ! Estimated noise=3150.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111559 Jy ! Component: 100 - total flux cleaned = 0.139513 Jy ! Component: 150 - total flux cleaned = 0.149824 Jy ! Component: 200 - total flux cleaned = 0.153739 Jy ! Total flux subtracted in 200 components = 0.153739 Jy ! Clean residual min=-0.009855 max=0.009597 Jy/beam ! Clean residual mean=-0.000012 rms=0.002269 Jy/beam ! Combined flux in latest and established models = 0.153739 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.153739 Jy ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.969 mas, bpa=-5.827 degrees ! Estimated noise=2591.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351098 Jy ! Component: 100 - total flux cleaned = 0.00336619 Jy ! Component: 150 - total flux cleaned = 0.00335969 Jy ! Component: 200 - total flux cleaned = 0.00336237 Jy ! Total flux subtracted in 200 components = 0.00336237 Jy ! Clean residual min=-0.006942 max=0.006436 Jy/beam ! Clean residual mean=-0.000016 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.157101 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.157101 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.559 mas, bmaj=15.82 mas, bpa=3.664 degrees ! Estimated noise=3786.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378865 Jy ! Component: 100 - total flux cleaned = -0.000288715 Jy ! Component: 150 - total flux cleaned = -0.000430285 Jy ! Component: 200 - total flux cleaned = -0.000548681 Jy ! Total flux subtracted in 200 components = -0.000548681 Jy ! Clean residual min=-0.004648 max=0.007039 Jy/beam ! Clean residual mean=-0.000033 rms=0.001791 Jy/beam ! Combined flux in latest and established models = 0.156552 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167948 Jy ! Component: 100 - total flux cleaned = -0.00037165 Jy ! Component: 150 - total flux cleaned = -0.000559768 Jy ! Component: 200 - total flux cleaned = -0.000648911 Jy ! Total flux subtracted in 200 components = -0.000648911 Jy ! Clean residual min=-0.004641 max=0.006836 Jy/beam ! Clean residual mean=-0.000034 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.155903 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 0.155903 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.969 mas, bpa=-5.827 degrees ! Estimated noise=2591.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576012 Jy ! Component: 100 - total flux cleaned = 0.000470199 Jy ! Component: 150 - total flux cleaned = 0.000547842 Jy ! Component: 200 - total flux cleaned = 0.000548553 Jy ! Total flux subtracted in 200 components = 0.000548553 Jy ! Clean residual min=-0.006780 max=0.006195 Jy/beam ! Clean residual mean=-0.000015 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.156452 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.156452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154863Jy sigma=0.000633 ! Fit after self-cal, rms=0.154900Jy sigma=0.000633 wmodel J1552-2425_S_2017_01_21_pus_map.mod ! Writing 70 model components to file: J1552-2425_S_2017_01_21_pus_map.mod wobs J1552-2425_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1552-2425_S_2017_01_21_pus_uvs.fits wwins J1552-2425_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1552-2425_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126564 Jy ! Component: 100 - total flux cleaned = -0.000636795 Jy ! Component: 150 - total flux cleaned = -4.30807e-05 Jy ! Component: 200 - total flux cleaned = 0.000415708 Jy ! Component: 250 - total flux cleaned = 0.000843931 Jy ! Component: 300 - total flux cleaned = 0.000925153 Jy ! Component: 350 - total flux cleaned = 0.000695883 Jy ! Component: 400 - total flux cleaned = 0.000697252 Jy ! Component: 450 - total flux cleaned = 0.000698127 Jy ! Component: 500 - total flux cleaned = 0.000697556 Jy ! Component: 550 - total flux cleaned = 0.000829469 Jy ! Component: 600 - total flux cleaned = 0.000891847 Jy ! Component: 650 - total flux cleaned = 0.00101455 Jy ! Component: 700 - total flux cleaned = 0.00125563 Jy ! Component: 750 - total flux cleaned = 0.00143326 Jy ! Component: 800 - total flux cleaned = 0.00149209 Jy ! Component: 850 - total flux cleaned = 0.00166178 Jy ! Component: 900 - total flux cleaned = 0.00171797 Jy ! Component: 950 - total flux cleaned = 0.00187999 Jy ! Component: 1000 - total flux cleaned = 0.00193286 Jy ! Component: 1050 - total flux cleaned = 0.00193401 Jy ! Component: 1100 - total flux cleaned = 0.00178066 Jy ! Component: 1150 - total flux cleaned = 0.00183146 Jy ! Component: 1200 - total flux cleaned = 0.00153312 Jy ! Component: 1250 - total flux cleaned = 0.00158268 Jy ! Component: 1300 - total flux cleaned = 0.00153434 Jy ! Component: 1350 - total flux cleaned = 0.00153437 Jy ! Component: 1400 - total flux cleaned = 0.00134687 Jy ! Component: 1450 - total flux cleaned = 0.0014399 Jy ! Component: 1500 - total flux cleaned = 0.00144026 Jy ! Component: 1550 - total flux cleaned = 0.00175775 Jy ! Component: 1600 - total flux cleaned = 0.00180268 Jy ! Component: 1650 - total flux cleaned = 0.00189136 Jy ! Component: 1700 - total flux cleaned = 0.00202312 Jy ! Component: 1750 - total flux cleaned = 0.00211066 Jy ! Component: 1800 - total flux cleaned = 0.00215406 Jy ! Component: 1850 - total flux cleaned = 0.00219685 Jy ! Component: 1900 - total flux cleaned = 0.00206926 Jy ! Component: 1950 - total flux cleaned = 0.00219564 Jy ! Component: 2000 - total flux cleaned = 0.00207014 Jy ! Component: 2050 - total flux cleaned = 0.00215355 Jy ! Component: 2100 - total flux cleaned = 0.00215344 Jy ! Component: 2150 - total flux cleaned = 0.00211237 Jy ! Component: 2200 - total flux cleaned = 0.00207185 Jy ! Component: 2250 - total flux cleaned = 0.00203179 Jy ! Component: 2300 - total flux cleaned = 0.00211205 Jy ! Component: 2350 - total flux cleaned = 0.00207201 Jy ! Component: 2400 - total flux cleaned = 0.00219045 Jy ! Component: 2450 - total flux cleaned = 0.0021117 Jy ! Component: 2500 - total flux cleaned = 0.00215093 Jy ! Component: 2550 - total flux cleaned = 0.00207326 Jy ! Component: 2600 - total flux cleaned = 0.00207334 Jy ! Component: 2650 - total flux cleaned = 0.00218888 Jy ! Component: 2700 - total flux cleaned = 0.00222707 Jy ! Component: 2750 - total flux cleaned = 0.00230336 Jy ! Component: 2800 - total flux cleaned = 0.00234147 Jy ! Component: 2850 - total flux cleaned = 0.00249283 Jy ! Component: 2900 - total flux cleaned = 0.00264346 Jy ! Component: 2950 - total flux cleaned = 0.00279356 Jy ! Component: 3000 - total flux cleaned = 0.00290563 Jy ! Component: 3050 - total flux cleaned = 0.00301758 Jy ! Component: 3100 - total flux cleaned = 0.00312923 Jy ! Component: 3150 - total flux cleaned = 0.00316646 Jy ! Component: 3200 - total flux cleaned = 0.00327779 Jy ! Component: 3250 - total flux cleaned = 0.00331471 Jy ! Component: 3300 - total flux cleaned = 0.00338885 Jy ! Component: 3350 - total flux cleaned = 0.00349981 Jy ! Component: 3400 - total flux cleaned = 0.00357382 Jy ! Component: 3450 - total flux cleaned = 0.00364825 Jy ! Component: 3500 - total flux cleaned = 0.00357406 Jy ! Component: 3550 - total flux cleaned = 0.00372245 Jy ! Component: 3600 - total flux cleaned = 0.00383393 Jy ! Component: 3650 - total flux cleaned = 0.00375967 Jy ! Component: 3700 - total flux cleaned = 0.00383421 Jy ! Component: 3750 - total flux cleaned = 0.00387161 Jy ! Component: 3800 - total flux cleaned = 0.00398365 Jy ! Component: 3850 - total flux cleaned = 0.00402091 Jy ! Component: 3900 - total flux cleaned = 0.00409575 Jy ! Component: 3950 - total flux cleaned = 0.00413333 Jy ! Component: 4000 - total flux cleaned = 0.00428357 Jy ! Component: 4050 - total flux cleaned = 0.00435926 Jy ! Total flux subtracted in 4096 components = 0.00443494 Jy ! Clean residual min=-0.002074 max=0.002448 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.160887 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 335 components and 0.160887 Jy ![Exited script file: muppet] wmap "J1552-2425_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.595 x 6.969 at -5.827 degrees (North through East) ! Clean map min=-0.0048913 max=0.12453 Jy/beam ! Writing clean map to FITS file: J1552-2425_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124527 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000664013 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.59968 1.59968 3.19937 6.39874 12.7975 25.595 51.1899 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.595 x 6.969 at -5.827 degrees (North through East) ! Clean map min=-0.0048913 max=0.12453 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1552-2425_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:51 2019