! Started logfile: J1552-2425_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:16:59 2019 obs J1552-2425_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1552-2425_S_2017_01_16_pus_uva.fits ! AN table 1: 79 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.634599 visibilities/baseline/integration-bin. ! Found source: J1552-2425 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 9024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1552-2425_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 179 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914842Jy sigma=0.005773 ! Fit after self-cal, rms=0.891314Jy sigma=0.005669 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=13.02 mas, bpa=17.14 degrees ! Estimated noise=1811.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0887452 Jy ! Component: 100 - total flux cleaned = 0.108159 Jy ! Total flux subtracted in 100 components = 0.108159 Jy ! Clean residual min=-0.005268 max=0.005919 Jy/beam ! Clean residual mean=-0.000014 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.108159 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.108159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147234Jy sigma=0.000689 ! Fit after self-cal, rms=0.147206Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=15.59 mas, bpa=15.53 degrees ! Estimated noise=1223.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101368 Jy ! Component: 100 - total flux cleaned = 0.0151073 Jy ! Component: 150 - total flux cleaned = 0.0181016 Jy ! Component: 200 - total flux cleaned = 0.019973 Jy ! Total flux subtracted in 200 components = 0.019973 Jy ! Clean residual min=-0.004235 max=0.004242 Jy/beam ! Clean residual mean=0.000015 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.128132 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.128132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146224Jy sigma=0.000685 ! Fit after self-cal, rms=0.146285Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.95 KP 0.86 ! LA 1.03 MK 1.00* NL 0.92 OV 1.06 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.06 KP 0.92 ! LA 0.99 MK 1.00* NL 1.01 OV 1.01 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.21 KP 1.07 ! LA 1.08 MK 1.00* NL 1.00 OV 0.95 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.89 KP 0.94 ! LA 0.86 MK 1.00* NL 1.16 OV 1.02 ! PT 1.05 SC 0.91 ! ! ! Fit before self-cal, rms=0.146285Jy sigma=0.000685 ! Fit after self-cal, rms=0.137237Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=15.65 mas, bpa=15.56 degrees ! Estimated noise=1228.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117679 Jy ! Component: 100 - total flux cleaned = 0.00142155 Jy ! Component: 150 - total flux cleaned = 0.00146544 Jy ! Component: 200 - total flux cleaned = 0.00150627 Jy ! Total flux subtracted in 200 components = 0.00150627 Jy ! Clean residual min=-0.003902 max=0.003990 Jy/beam ! Clean residual mean=0.000013 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.129638 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.129638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137210Jy sigma=0.000682 ! Fit after self-cal, rms=0.137054Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137054Jy sigma=0.000682 ! Fit after self-cal, rms=0.137447Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=15.62 mas, bpa=15.55 degrees ! Estimated noise=1238.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111771 Jy ! Component: 100 - total flux cleaned = 0.00143237 Jy ! Component: 150 - total flux cleaned = 0.00147002 Jy ! Component: 200 - total flux cleaned = 0.00148771 Jy ! Total flux subtracted in 200 components = 0.00148771 Jy ! Clean residual min=-0.003988 max=0.004076 Jy/beam ! Clean residual mean=0.000015 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.131126 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.131126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137420Jy sigma=0.000682 ! Fit after self-cal, rms=0.137398Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.0264e-05 Jy ! Component: 100 - total flux cleaned = 5.70018e-05 Jy ! Component: 150 - total flux cleaned = 8.8336e-05 Jy ! Component: 200 - total flux cleaned = 0.000103322 Jy ! Total flux subtracted in 200 components = 0.000103322 Jy ! Clean residual min=-0.003996 max=0.004078 Jy/beam ! Clean residual mean=0.000015 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.131229 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.131229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137394Jy sigma=0.000682 ! Fit after self-cal, rms=0.137393Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137393Jy sigma=0.000682 ! Fit after self-cal, rms=0.137764Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=15.49 mas, bpa=15.46 degrees ! Estimated noise=1245.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034483 Jy ! Component: 100 - total flux cleaned = 0.000345258 Jy ! Component: 150 - total flux cleaned = 0.000315496 Jy ! Component: 200 - total flux cleaned = 0.000291 Jy ! Total flux subtracted in 200 components = 0.000291 Jy ! Clean residual min=-0.003266 max=0.002814 Jy/beam ! Clean residual mean=0.000002 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.13152 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.13152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137745Jy sigma=0.000679 ! Fit after self-cal, rms=0.137728Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.60573e-05 Jy ! Component: 100 - total flux cleaned = 7.47532e-05 Jy ! Component: 150 - total flux cleaned = 7.48841e-05 Jy ! Component: 200 - total flux cleaned = 9.10664e-05 Jy ! Total flux subtracted in 200 components = 9.10664e-05 Jy ! Clean residual min=-0.003311 max=0.002874 Jy/beam ! Clean residual mean=0.000003 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.131611 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.131611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137721Jy sigma=0.000678 ! Fit after self-cal, rms=0.137717Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137717Jy sigma=0.000678 ! Fit after self-cal, rms=0.139104Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.373 mas, bmaj=21.83 mas, bpa=5.926 degrees ! Estimated noise=1454.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000889026 Jy ! Component: 100 - total flux cleaned = 0.00111939 Jy ! Component: 150 - total flux cleaned = 0.00114894 Jy ! Component: 200 - total flux cleaned = 0.00116558 Jy ! Total flux subtracted in 200 components = 0.00116558 Jy ! Clean residual min=-0.003155 max=0.003215 Jy/beam ! Clean residual mean=0.000006 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.132777 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.132777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139094Jy sigma=0.000678 ! Fit after self-cal, rms=0.139095Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.84812e-05 Jy ! Component: 100 - total flux cleaned = 4.68415e-05 Jy ! Component: 150 - total flux cleaned = 4.71966e-05 Jy ! Component: 200 - total flux cleaned = 5.39981e-05 Jy ! Total flux subtracted in 200 components = 5.39981e-05 Jy ! Clean residual min=-0.003168 max=0.003232 Jy/beam ! Clean residual mean=0.000006 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.132831 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 106 components and 0.132831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139093Jy sigma=0.000678 ! Fit after self-cal, rms=0.139093Jy sigma=0.000678 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=15.47 mas, bpa=15.48 degrees ! Estimated noise=1252.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.791 x 15.47 at 15.48 degrees (North through East) ! Clean map min=-0.0032229 max=0.11669 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=12.86 mas, bpa=17.08 degrees ! Estimated noise=1860.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909606 Jy ! Component: 100 - total flux cleaned = 0.11091 Jy ! Component: 150 - total flux cleaned = 0.117319 Jy ! Component: 200 - total flux cleaned = 0.120691 Jy ! Total flux subtracted in 200 components = 0.120691 Jy ! Clean residual min=-0.004781 max=0.004067 Jy/beam ! Clean residual mean=-0.000008 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.120691 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.120691 Jy ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=15.47 mas, bpa=15.48 degrees ! Estimated noise=1252.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470491 Jy ! Component: 100 - total flux cleaned = 0.0072874 Jy ! Component: 150 - total flux cleaned = 0.00885275 Jy ! Component: 200 - total flux cleaned = 0.00972813 Jy ! Total flux subtracted in 200 components = 0.00972813 Jy ! Clean residual min=-0.003296 max=0.003017 Jy/beam ! Clean residual mean=0.000003 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.130419 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 55 components and 0.130419 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.373 mas, bmaj=21.83 mas, bpa=5.926 degrees ! Estimated noise=1454.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010726 Jy ! Component: 100 - total flux cleaned = 0.00152708 Jy ! Component: 150 - total flux cleaned = 0.00158904 Jy ! Component: 200 - total flux cleaned = 0.00164632 Jy ! Total flux subtracted in 200 components = 0.00164632 Jy ! Clean residual min=-0.003112 max=0.003261 Jy/beam ! Clean residual mean=0.000005 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.132065 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27815e-05 Jy ! Component: 100 - total flux cleaned = 0.000102152 Jy ! Component: 150 - total flux cleaned = 0.000148525 Jy ! Component: 200 - total flux cleaned = 0.000201837 Jy ! Total flux subtracted in 200 components = 0.000201837 Jy ! Clean residual min=-0.003127 max=0.003244 Jy/beam ! Clean residual mean=0.000006 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.132267 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.132267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=15.47 mas, bpa=15.48 degrees ! Estimated noise=1252.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000537502 Jy ! Component: 100 - total flux cleaned = -0.000622123 Jy ! Component: 150 - total flux cleaned = -0.000621614 Jy ! Component: 200 - total flux cleaned = -0.000620939 Jy ! Total flux subtracted in 200 components = -0.000620939 Jy ! Clean residual min=-0.003324 max=0.002887 Jy/beam ! Clean residual mean=0.000004 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.131646 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.131646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139094Jy sigma=0.000678 ! Fit after self-cal, rms=0.139088Jy sigma=0.000678 wmodel J1552-2425_S_2017_01_16_pus_map.mod ! Writing 75 model components to file: J1552-2425_S_2017_01_16_pus_map.mod wobs J1552-2425_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1552-2425_S_2017_01_16_pus_uvs.fits wwins J1552-2425_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1552-2425_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135034 Jy ! Component: 100 - total flux cleaned = -0.00176701 Jy ! Component: 150 - total flux cleaned = -0.00181752 Jy ! Component: 200 - total flux cleaned = -0.00186375 Jy ! Component: 250 - total flux cleaned = -0.00208698 Jy ! Component: 300 - total flux cleaned = -0.00239046 Jy ! Component: 350 - total flux cleaned = -0.00260064 Jy ! Component: 400 - total flux cleaned = -0.00276466 Jy ! Component: 450 - total flux cleaned = -0.00296352 Jy ! Component: 500 - total flux cleaned = -0.00311943 Jy ! Component: 550 - total flux cleaned = -0.00331024 Jy ! Component: 600 - total flux cleaned = -0.00342209 Jy ! Component: 650 - total flux cleaned = -0.00349563 Jy ! Component: 700 - total flux cleaned = -0.00356794 Jy ! Component: 750 - total flux cleaned = -0.0036744 Jy ! Component: 800 - total flux cleaned = -0.00374452 Jy ! Component: 850 - total flux cleaned = -0.00384663 Jy ! Component: 900 - total flux cleaned = -0.00384625 Jy ! Component: 950 - total flux cleaned = -0.00387932 Jy ! Component: 1000 - total flux cleaned = -0.00391198 Jy ! Component: 1050 - total flux cleaned = -0.00404113 Jy ! Component: 1100 - total flux cleaned = -0.00407239 Jy ! Component: 1150 - total flux cleaned = -0.00416748 Jy ! Component: 1200 - total flux cleaned = -0.00429208 Jy ! Component: 1250 - total flux cleaned = -0.0043851 Jy ! Component: 1300 - total flux cleaned = -0.00456789 Jy ! Component: 1350 - total flux cleaned = -0.00462823 Jy ! Component: 1400 - total flux cleaned = -0.0047474 Jy ! Component: 1450 - total flux cleaned = -0.00483583 Jy ! Component: 1500 - total flux cleaned = -0.00501013 Jy ! Component: 1550 - total flux cleaned = -0.00512459 Jy ! Component: 1600 - total flux cleaned = -0.00509609 Jy ! Component: 1650 - total flux cleaned = -0.00526466 Jy ! Component: 1700 - total flux cleaned = -0.00534775 Jy ! Component: 1750 - total flux cleaned = -0.00542994 Jy ! Component: 1800 - total flux cleaned = -0.00545672 Jy ! Component: 1850 - total flux cleaned = -0.00545694 Jy ! Component: 1900 - total flux cleaned = -0.00559043 Jy ! Component: 1950 - total flux cleaned = -0.00561697 Jy ! Component: 2000 - total flux cleaned = -0.00569529 Jy ! Component: 2050 - total flux cleaned = -0.0057731 Jy ! Component: 2100 - total flux cleaned = -0.00579875 Jy ! Component: 2150 - total flux cleaned = -0.0059003 Jy ! Component: 2200 - total flux cleaned = -0.00597611 Jy ! Component: 2250 - total flux cleaned = -0.00607629 Jy ! Component: 2300 - total flux cleaned = -0.00610128 Jy ! Component: 2350 - total flux cleaned = -0.00617532 Jy ! Component: 2400 - total flux cleaned = -0.0062485 Jy ! Component: 2450 - total flux cleaned = -0.00639361 Jy ! Component: 2500 - total flux cleaned = -0.00641752 Jy ! Component: 2550 - total flux cleaned = -0.00648908 Jy ! Component: 2600 - total flux cleaned = -0.00653633 Jy ! Component: 2650 - total flux cleaned = -0.00660661 Jy ! Component: 2700 - total flux cleaned = -0.00676893 Jy ! Component: 2750 - total flux cleaned = -0.00674589 Jy ! Component: 2800 - total flux cleaned = -0.0068601 Jy ! Component: 2850 - total flux cleaned = -0.00690562 Jy ! Component: 2900 - total flux cleaned = -0.00697323 Jy ! Component: 2950 - total flux cleaned = -0.0070403 Jy ! Component: 3000 - total flux cleaned = -0.00708467 Jy ! Component: 3050 - total flux cleaned = -0.00721676 Jy ! Component: 3100 - total flux cleaned = -0.00728212 Jy ! Component: 3150 - total flux cleaned = -0.00743359 Jy ! Component: 3200 - total flux cleaned = -0.00749781 Jy ! Component: 3250 - total flux cleaned = -0.0076047 Jy ! Component: 3300 - total flux cleaned = -0.00766832 Jy ! Component: 3350 - total flux cleaned = -0.00781557 Jy ! Component: 3400 - total flux cleaned = -0.00791994 Jy ! Component: 3450 - total flux cleaned = -0.00796133 Jy ! Component: 3500 - total flux cleaned = -0.0081057 Jy ! Component: 3550 - total flux cleaned = -0.00824905 Jy ! Component: 3600 - total flux cleaned = -0.00828966 Jy ! Component: 3650 - total flux cleaned = -0.00833014 Jy ! Component: 3700 - total flux cleaned = -0.00839042 Jy ! Component: 3750 - total flux cleaned = -0.00845041 Jy ! Component: 3800 - total flux cleaned = -0.00860895 Jy ! Component: 3850 - total flux cleaned = -0.00870751 Jy ! Component: 3900 - total flux cleaned = -0.00874673 Jy ! Component: 3950 - total flux cleaned = -0.00884385 Jy ! Component: 4000 - total flux cleaned = -0.00894053 Jy ! Component: 4050 - total flux cleaned = -0.0089981 Jy ! Total flux subtracted in 4096 components = -0.00901723 Jy ! Clean residual min=-0.001165 max=0.001038 Jy/beam ! Clean residual mean=0.000005 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.122629 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 366 components and 0.122629 Jy ![Exited script file: muppet] wmap "J1552-2425_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.791 x 15.47 at 15.48 degrees (North through East) ! Clean map min=-0.0023814 max=0.11692 Jy/beam ! Writing clean map to FITS file: J1552-2425_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116924 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000370079 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.949539 0.949539 1.89908 3.79816 7.59631 15.1926 30.3853 60.7705 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.791 x 15.47 at 15.48 degrees (North through East) ! Clean map min=-0.0023814 max=0.11692 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1552-2425_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:17:04 2019