! Started logfile: J1550-2004_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:42 2019 obs J1550-2004_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1550-2004_S_2017_01_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.670091 visibilities/baseline/integration-bin. ! Found source: J1550-2004 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 14088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1550-2004_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 580 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957602Jy sigma=0.006023 ! Fit after self-cal, rms=0.927839Jy sigma=0.005870 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=6.108 mas, bpa=-6.147 degrees ! Estimated noise=1566.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602215 Jy ! Component: 100 - total flux cleaned = 0.0736558 Jy ! Total flux subtracted in 100 components = 0.0736558 Jy ! Clean residual min=-0.005373 max=0.005248 Jy/beam ! Clean residual mean=-0.000003 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.0736558 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0736558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112158Jy sigma=0.000632 ! Fit after self-cal, rms=0.111845Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=6.757 mas, bpa=-5.701 degrees ! Estimated noise=1043.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551487 Jy ! Component: 100 - total flux cleaned = 0.00813139 Jy ! Component: 150 - total flux cleaned = 0.00945867 Jy ! Component: 200 - total flux cleaned = 0.00985949 Jy ! Total flux subtracted in 200 components = 0.00985949 Jy ! Clean residual min=-0.002911 max=0.003341 Jy/beam ! Clean residual mean=-0.000003 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.0835153 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.0835153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111558Jy sigma=0.000628 ! Fit after self-cal, rms=0.111545Jy sigma=0.000628 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.99 LA 1.09 ! MK 1.02 NL 0.97 OV 1.09 PT 1.05 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.00 LA 1.02 ! MK 1.02 NL 1.07 OV 1.06 PT 1.03 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 LA 0.97 ! MK 1.08 NL 1.00 OV 1.02 PT 1.02 ! SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.88 LA 0.84 ! MK 0.93 NL 1.00* OV 0.85 PT 0.93 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.111545Jy sigma=0.000628 ! Fit after self-cal, rms=0.110339Jy sigma=0.000627 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.768 mas, bpa=-5.718 degrees ! Estimated noise=1041.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317938 Jy ! Component: 100 - total flux cleaned = 0.000285899 Jy ! Component: 150 - total flux cleaned = 0.000339062 Jy ! Component: 200 - total flux cleaned = 0.000384621 Jy ! Total flux subtracted in 200 components = 0.000384621 Jy ! Clean residual min=-0.002498 max=0.002817 Jy/beam ! Clean residual mean=0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0838999 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0838999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110322Jy sigma=0.000627 ! Fit after self-cal, rms=0.110243Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110243Jy sigma=0.000626 ! Fit after self-cal, rms=0.109998Jy sigma=0.000626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.776 mas, bpa=-5.675 degrees ! Estimated noise=1040.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138446 Jy ! Component: 100 - total flux cleaned = 0.000158229 Jy ! Component: 150 - total flux cleaned = 0.000197601 Jy ! Component: 200 - total flux cleaned = 0.000215489 Jy ! Total flux subtracted in 200 components = 0.000215489 Jy ! Clean residual min=-0.002362 max=0.002622 Jy/beam ! Clean residual mean=0.000003 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0841154 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0841154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109988Jy sigma=0.000626 ! Fit after self-cal, rms=0.109978Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (94.5, 52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145574 Jy ! Component: 100 - total flux cleaned = 0.00178049 Jy ! Component: 150 - total flux cleaned = 0.00181804 Jy ! Component: 200 - total flux cleaned = 0.00184971 Jy ! Total flux subtracted in 200 components = 0.00184971 Jy ! Clean residual min=-0.002282 max=0.002580 Jy/beam ! Clean residual mean=0.000003 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0859651 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.0859651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109916Jy sigma=0.000626 ! Fit after self-cal, rms=0.109904Jy sigma=0.000626 ! Inverting map ! Added new window around map position (4, 121). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121817 Jy ! Component: 100 - total flux cleaned = 0.00165542 Jy ! Component: 150 - total flux cleaned = 0.0017545 Jy ! Component: 200 - total flux cleaned = 0.00186489 Jy ! Total flux subtracted in 200 components = 0.00186489 Jy ! Clean residual min=-0.002076 max=0.002021 Jy/beam ! Clean residual mean=0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.08783 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.08783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109830Jy sigma=0.000625 ! Fit after self-cal, rms=0.109806Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109806Jy sigma=0.000625 ! Fit after self-cal, rms=0.109450Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=6.773 mas, bpa=-5.619 degrees ! Estimated noise=1040.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108185 Jy ! Component: 100 - total flux cleaned = 0.00118112 Jy ! Component: 150 - total flux cleaned = 0.00129727 Jy ! Component: 200 - total flux cleaned = 0.00136625 Jy ! Total flux subtracted in 200 components = 0.00136625 Jy ! Clean residual min=-0.002058 max=0.001971 Jy/beam ! Clean residual mean=0.000003 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0891962 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.0891963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109408Jy sigma=0.000625 ! Fit after self-cal, rms=0.109400Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478987 Jy ! Component: 100 - total flux cleaned = 0.000516518 Jy ! Component: 150 - total flux cleaned = 0.000580637 Jy ! Component: 200 - total flux cleaned = 0.000609869 Jy ! Total flux subtracted in 200 components = 0.000609869 Jy ! Clean residual min=-0.002106 max=0.001947 Jy/beam ! Clean residual mean=0.000002 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0898061 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 66 components and 0.0898061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109377Jy sigma=0.000624 ! Fit after self-cal, rms=0.109376Jy sigma=0.000624 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109376Jy sigma=0.000624 ! Fit after self-cal, rms=0.109268Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.29 mas, bmaj=13.61 mas, bpa=4.118 degrees ! Estimated noise=1511.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735702 Jy ! Component: 100 - total flux cleaned = 0.000674679 Jy ! Component: 150 - total flux cleaned = 0.000619418 Jy ! Component: 200 - total flux cleaned = 0.000641367 Jy ! Total flux subtracted in 200 components = 0.000641367 Jy ! Clean residual min=-0.002145 max=0.002276 Jy/beam ! Clean residual mean=0.000007 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0904475 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.0904475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109259Jy sigma=0.000624 ! Fit after self-cal, rms=0.109255Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167434 Jy ! Component: 100 - total flux cleaned = -0.000191699 Jy ! Component: 150 - total flux cleaned = -0.000192005 Jy ! Component: 200 - total flux cleaned = -0.000234133 Jy ! Total flux subtracted in 200 components = -0.000234133 Jy ! Clean residual min=-0.002101 max=0.002262 Jy/beam ! Clean residual mean=0.000007 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0902134 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.0902134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109251Jy sigma=0.000624 ! Fit after self-cal, rms=0.109249Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.766 mas, bpa=-5.604 degrees ! Estimated noise=1041.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.604 x 6.766 at -5.604 degrees (North through East) ! Clean map min=-0.0024837 max=0.078205 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=6.147 mas, bpa=-6.078 degrees ! Estimated noise=1539.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591964 Jy ! Component: 100 - total flux cleaned = 0.0732673 Jy ! Component: 150 - total flux cleaned = 0.0808478 Jy ! Component: 200 - total flux cleaned = 0.0852712 Jy ! Total flux subtracted in 200 components = 0.0852712 Jy ! Clean residual min=-0.004939 max=0.004241 Jy/beam ! Clean residual mean=-0.000001 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.0852712 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0852712 Jy ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.766 mas, bpa=-5.604 degrees ! Estimated noise=1041.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289807 Jy ! Component: 100 - total flux cleaned = 0.0032471 Jy ! Component: 150 - total flux cleaned = 0.00306742 Jy ! Component: 200 - total flux cleaned = 0.00339181 Jy ! Total flux subtracted in 200 components = 0.00339181 Jy ! Clean residual min=-0.002438 max=0.002233 Jy/beam ! Clean residual mean=-0.000000 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.088663 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 40 components and 0.088663 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.29 mas, bmaj=13.61 mas, bpa=4.118 degrees ! Estimated noise=1511.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169846 Jy ! Component: 100 - total flux cleaned = 0.00150989 Jy ! Component: 150 - total flux cleaned = 0.00138366 Jy ! Component: 200 - total flux cleaned = 0.00128085 Jy ! Total flux subtracted in 200 components = 0.00128085 Jy ! Clean residual min=-0.002292 max=0.002190 Jy/beam ! Clean residual mean=0.000005 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0899439 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.86317e-05 Jy ! Component: 100 - total flux cleaned = -8.04455e-05 Jy ! Component: 150 - total flux cleaned = -0.000104685 Jy ! Component: 200 - total flux cleaned = -0.000169974 Jy ! Total flux subtracted in 200 components = -0.000169974 Jy ! Clean residual min=-0.002150 max=0.002129 Jy/beam ! Clean residual mean=0.000006 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0897739 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 58 components and 0.0897739 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.766 mas, bpa=-5.604 degrees ! Estimated noise=1041.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000298293 Jy ! Component: 100 - total flux cleaned = -0.000471228 Jy ! Component: 150 - total flux cleaned = -0.000473632 Jy ! Component: 200 - total flux cleaned = -0.000518451 Jy ! Total flux subtracted in 200 components = -0.000518451 Jy ! Clean residual min=-0.002069 max=0.002005 Jy/beam ! Clean residual mean=0.000004 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0892555 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.0892555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109275Jy sigma=0.000624 ! Fit after self-cal, rms=0.109285Jy sigma=0.000624 wmodel J1550-2004_S_2017_01_21_pus_map.mod ! Writing 77 model components to file: J1550-2004_S_2017_01_21_pus_map.mod wobs J1550-2004_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1550-2004_S_2017_01_21_pus_uvs.fits wwins J1550-2004_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1550-2004_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464702 Jy ! Component: 100 - total flux cleaned = -0.000568157 Jy ! Component: 150 - total flux cleaned = -0.000600969 Jy ! Component: 200 - total flux cleaned = -0.000600495 Jy ! Component: 250 - total flux cleaned = -0.000748079 Jy ! Component: 300 - total flux cleaned = -0.000718594 Jy ! Component: 350 - total flux cleaned = -0.000773912 Jy ! Component: 400 - total flux cleaned = -0.000747417 Jy ! Component: 450 - total flux cleaned = -0.000591421 Jy ! Component: 500 - total flux cleaned = -0.00054078 Jy ! Component: 550 - total flux cleaned = -0.000417959 Jy ! Component: 600 - total flux cleaned = -0.000417461 Jy ! Component: 650 - total flux cleaned = -0.000298742 Jy ! Component: 700 - total flux cleaned = -0.000252084 Jy ! Component: 750 - total flux cleaned = -0.000115822 Jy ! Component: 800 - total flux cleaned = -4.92397e-05 Jy ! Component: 850 - total flux cleaned = -5.51865e-06 Jy ! Component: 900 - total flux cleaned = 0.000143488 Jy ! Component: 950 - total flux cleaned = 0.000226979 Jy ! Component: 1000 - total flux cleaned = 0.000330054 Jy ! Component: 1050 - total flux cleaned = 0.000491229 Jy ! Component: 1100 - total flux cleaned = 0.000589912 Jy ! Component: 1150 - total flux cleaned = 0.000687146 Jy ! Component: 1200 - total flux cleaned = 0.00076332 Jy ! Component: 1250 - total flux cleaned = 0.000857068 Jy ! Component: 1300 - total flux cleaned = 0.000931008 Jy ! Component: 1350 - total flux cleaned = 0.00100389 Jy ! Component: 1400 - total flux cleaned = 0.0010933 Jy ! Component: 1450 - total flux cleaned = 0.00112841 Jy ! Component: 1500 - total flux cleaned = 0.00119773 Jy ! Component: 1550 - total flux cleaned = 0.00124928 Jy ! Component: 1600 - total flux cleaned = 0.00133329 Jy ! Component: 1650 - total flux cleaned = 0.00133375 Jy ! Component: 1700 - total flux cleaned = 0.00146477 Jy ! Component: 1750 - total flux cleaned = 0.00154548 Jy ! Component: 1800 - total flux cleaned = 0.00157713 Jy ! Component: 1850 - total flux cleaned = 0.00167134 Jy ! Component: 1900 - total flux cleaned = 0.00171776 Jy ! Component: 1950 - total flux cleaned = 0.00176393 Jy ! Component: 2000 - total flux cleaned = 0.0019003 Jy ! Component: 2050 - total flux cleaned = 0.00194529 Jy ! Component: 2100 - total flux cleaned = 0.00206345 Jy ! Component: 2150 - total flux cleaned = 0.00204874 Jy ! Component: 2200 - total flux cleaned = 0.00213573 Jy ! Component: 2250 - total flux cleaned = 0.00216444 Jy ! Component: 2300 - total flux cleaned = 0.00223503 Jy ! Component: 2350 - total flux cleaned = 0.00224912 Jy ! Component: 2400 - total flux cleaned = 0.00229077 Jy ! Component: 2450 - total flux cleaned = 0.00240069 Jy ! Component: 2500 - total flux cleaned = 0.00238696 Jy ! Component: 2550 - total flux cleaned = 0.00245435 Jy ! Component: 2600 - total flux cleaned = 0.00246763 Jy ! Component: 2650 - total flux cleaned = 0.00248087 Jy ! Component: 2700 - total flux cleaned = 0.00249372 Jy ! Component: 2750 - total flux cleaned = 0.00246772 Jy ! Component: 2800 - total flux cleaned = 0.00248056 Jy ! Component: 2850 - total flux cleaned = 0.00249339 Jy ! Component: 2900 - total flux cleaned = 0.00248095 Jy ! Component: 2950 - total flux cleaned = 0.00248094 Jy ! Component: 3000 - total flux cleaned = 0.00248089 Jy ! Component: 3050 - total flux cleaned = 0.00253014 Jy ! Component: 3100 - total flux cleaned = 0.00245665 Jy ! Component: 3150 - total flux cleaned = 0.00249306 Jy ! Component: 3200 - total flux cleaned = 0.00246897 Jy ! Component: 3250 - total flux cleaned = 0.00245717 Jy ! Component: 3300 - total flux cleaned = 0.00245729 Jy ! Component: 3350 - total flux cleaned = 0.00246906 Jy ! Component: 3400 - total flux cleaned = 0.00248079 Jy ! Component: 3450 - total flux cleaned = 0.00248087 Jy ! Component: 3500 - total flux cleaned = 0.00249251 Jy ! Component: 3550 - total flux cleaned = 0.00252671 Jy ! Component: 3600 - total flux cleaned = 0.00252673 Jy ! Component: 3650 - total flux cleaned = 0.00259447 Jy ! Component: 3700 - total flux cleaned = 0.00259425 Jy ! Component: 3750 - total flux cleaned = 0.00261646 Jy ! Component: 3800 - total flux cleaned = 0.00262748 Jy ! Component: 3850 - total flux cleaned = 0.00261644 Jy ! Component: 3900 - total flux cleaned = 0.00262744 Jy ! Component: 3950 - total flux cleaned = 0.00264923 Jy ! Component: 4000 - total flux cleaned = 0.00265991 Jy ! Component: 4050 - total flux cleaned = 0.00268132 Jy ! Total flux subtracted in 4096 components = 0.00265994 Jy ! Clean residual min=-0.000552 max=0.000701 Jy/beam ! Clean residual mean=0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.0919154 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 338 components and 0.0919154 Jy ![Exited script file: muppet] wmap "J1550-2004_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.604 x 6.766 at -5.604 degrees (North through East) ! Clean map min=-0.0020391 max=0.076982 Jy/beam ! Writing clean map to FITS file: J1550-2004_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0769819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017891 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.697217 0.697217 1.39443 2.78887 5.57774 11.1555 22.311 44.6219 89.2438 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.604 x 6.766 at -5.604 degrees (North through East) ! Clean map min=-0.0020391 max=0.076982 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1550-2004_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:46 2019