! Started logfile: J1548-1213_S_2017_07_16_pus_uvs.log on Thu May 9 11:12:43 2019 obs J1548-1213_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1548-1213_S_2017_07_16_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.523977 visibilities/baseline/integration-bin. ! Found source: J1548-1213 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 7168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1548-1213_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 276 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 276 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 760 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.673501Jy sigma=0.005259 ! Fit after self-cal, rms=0.553635Jy sigma=0.004315 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=9.431 mas, bpa=17.57 degrees ! Estimated noise=1687.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.435963 Jy ! Component: 100 - total flux cleaned = 0.637829 Jy ! Total flux subtracted in 100 components = 0.637829 Jy ! Clean residual min=-0.054818 max=0.097559 Jy/beam ! Clean residual mean=0.000184 rms=0.022529 Jy/beam ! Combined flux in latest and established models = 0.637829 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.637829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284616Jy sigma=0.002313 ! Fit after self-cal, rms=0.284077Jy sigma=0.002309 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=10.4 mas, bpa=15.16 degrees ! Estimated noise=1364.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.153375 Jy ! Component: 100 - total flux cleaned = 0.250062 Jy ! Component: 150 - total flux cleaned = 0.314355 Jy ! Component: 200 - total flux cleaned = 0.357575 Jy ! Total flux subtracted in 200 components = 0.357575 Jy ! Clean residual min=-0.038222 max=0.058304 Jy/beam ! Clean residual mean=0.000130 rms=0.013984 Jy/beam ! Combined flux in latest and established models = 0.995404 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 58 components and 0.995404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177793Jy sigma=0.001380 ! Fit after self-cal, rms=0.177558Jy sigma=0.001378 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 0.90 KP 0.97 ! LA 1.01 MK 1.00* NL 1.01 OV 0.91 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.94 KP 0.92 ! LA 0.98 MK 1.00* NL 1.20 OV 0.99 ! PT 0.84 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 0.91 ! LA 0.99 MK 1.00* NL 1.28 OV 0.92 ! PT 0.83 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.177558Jy sigma=0.001378 ! Fit after self-cal, rms=0.156073Jy sigma=0.001158 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.675 mas, bmaj=10.45 mas, bpa=14.41 degrees ! Estimated noise=1311.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000884997 Jy ! Component: 100 - total flux cleaned = -0.00140031 Jy ! Component: 150 - total flux cleaned = -0.00180401 Jy ! Component: 200 - total flux cleaned = -0.00180444 Jy ! Total flux subtracted in 200 components = -0.00180444 Jy ! Clean residual min=-0.028895 max=0.042238 Jy/beam ! Clean residual mean=0.000072 rms=0.009738 Jy/beam ! Combined flux in latest and established models = 0.993599 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.993599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155168Jy sigma=0.001154 ! Fit after self-cal, rms=0.155505Jy sigma=0.001153 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155505Jy sigma=0.001153 ! Fit after self-cal, rms=0.131637Jy sigma=0.000950 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=10.41 mas, bpa=14.46 degrees ! Estimated noise=1309.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00460407 Jy ! Component: 100 - total flux cleaned = -0.00463998 Jy ! Component: 150 - total flux cleaned = -0.00464538 Jy ! Component: 200 - total flux cleaned = -0.00452203 Jy ! Total flux subtracted in 200 components = -0.00452203 Jy ! Clean residual min=-0.022473 max=0.032880 Jy/beam ! Clean residual mean=-0.000015 rms=0.007365 Jy/beam ! Combined flux in latest and established models = 0.989077 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 73 components and 0.989077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131218Jy sigma=0.000946 ! Fit after self-cal, rms=0.131331Jy sigma=0.000945 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289858 Jy ! Component: 100 - total flux cleaned = 0.0296068 Jy ! Component: 150 - total flux cleaned = 0.0300209 Jy ! Component: 200 - total flux cleaned = 0.0322038 Jy ! Total flux subtracted in 200 components = 0.0322038 Jy ! Clean residual min=-0.019401 max=0.021683 Jy/beam ! Clean residual mean=-0.000021 rms=0.005709 Jy/beam ! Combined flux in latest and established models = 1.02128 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 124 components and 1.02128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123563Jy sigma=0.000888 ! Fit after self-cal, rms=0.123398Jy sigma=0.000886 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123398Jy sigma=0.000886 ! Fit after self-cal, rms=0.122658Jy sigma=0.000879 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=10.48 mas, bpa=14.44 degrees ! Estimated noise=1301.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247949 Jy ! Component: 100 - total flux cleaned = 0.00388831 Jy ! Component: 150 - total flux cleaned = 0.0044674 Jy ! Component: 200 - total flux cleaned = 0.00491657 Jy ! Total flux subtracted in 200 components = 0.00491657 Jy ! Clean residual min=-0.016902 max=0.020932 Jy/beam ! Clean residual mean=-0.000027 rms=0.005049 Jy/beam ! Combined flux in latest and established models = 1.0262 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 154 components and 1.0262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120722Jy sigma=0.000866 ! Fit after self-cal, rms=0.120641Jy sigma=0.000866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141417 Jy ! Component: 100 - total flux cleaned = 0.00223867 Jy ! Component: 150 - total flux cleaned = 0.0026104 Jy ! Component: 200 - total flux cleaned = 0.00260834 Jy ! Total flux subtracted in 200 components = 0.00260834 Jy ! Clean residual min=-0.016560 max=0.020867 Jy/beam ! Clean residual mean=-0.000027 rms=0.004946 Jy/beam ! Combined flux in latest and established models = 1.02881 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 172 components and 1.02881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119905Jy sigma=0.000862 ! Fit after self-cal, rms=0.119920Jy sigma=0.000862 ! Inverting map ! Added new window around map position (-14.5, 115.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123939 Jy ! Component: 100 - total flux cleaned = 0.0147719 Jy ! Component: 150 - total flux cleaned = 0.0154558 Jy ! Component: 200 - total flux cleaned = 0.0157592 Jy ! Total flux subtracted in 200 components = 0.0157592 Jy ! Clean residual min=-0.016462 max=0.016043 Jy/beam ! Clean residual mean=-0.000017 rms=0.004161 Jy/beam ! Combined flux in latest and established models = 1.04456 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 210 components and 1.04456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115024Jy sigma=0.000834 ! Fit after self-cal, rms=0.114834Jy sigma=0.000832 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114834Jy sigma=0.000832 ! Fit after self-cal, rms=0.113829Jy sigma=0.000828 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.066 mas, bmaj=15.3 mas, bpa=1.655 degrees ! Estimated noise=1570.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349703 Jy ! Component: 100 - total flux cleaned = 0.00142228 Jy ! Component: 150 - total flux cleaned = -0.000659629 Jy ! Component: 200 - total flux cleaned = -0.00229548 Jy ! Total flux subtracted in 200 components = -0.00229548 Jy ! Clean residual min=-0.021933 max=0.016847 Jy/beam ! Clean residual mean=-0.000054 rms=0.005021 Jy/beam ! Combined flux in latest and established models = 1.04227 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 231 components and 1.04227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112249Jy sigma=0.000823 ! Fit after self-cal, rms=0.112255Jy sigma=0.000823 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00229156 Jy ! Component: 100 - total flux cleaned = -0.00380677 Jy ! Component: 150 - total flux cleaned = -0.00499206 Jy ! Component: 200 - total flux cleaned = -0.00588051 Jy ! Total flux subtracted in 200 components = -0.00588051 Jy ! Clean residual min=-0.021136 max=0.016586 Jy/beam ! Clean residual mean=-0.000058 rms=0.004840 Jy/beam ! Combined flux in latest and established models = 1.03639 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 241 components and 1.03639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111527Jy sigma=0.000820 ! Fit after self-cal, rms=0.111578Jy sigma=0.000820 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=10.5 mas, bpa=14.15 degrees ! Estimated noise=1298.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.682 x 10.5 at 14.15 degrees (North through East) ! Clean map min=-0.018518 max=0.57168 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111578Jy sigma=0.000820 ! Fit after self-cal, rms=0.102017Jy sigma=0.000743 ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=10.49 mas, bpa=13.91 degrees ! Estimated noise=1297.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365031 Jy ! Component: 100 - total flux cleaned = 0.00367646 Jy ! Component: 150 - total flux cleaned = 0.00261439 Jy ! Component: 200 - total flux cleaned = 0.00101462 Jy ! Total flux subtracted in 200 components = 0.00101462 Jy ! Clean residual min=-0.014873 max=0.015182 Jy/beam ! Clean residual mean=-0.000037 rms=0.003585 Jy/beam ! Combined flux in latest and established models = 1.0374 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 265 components and 1.0374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100911Jy sigma=0.000735 ! Fit after self-cal, rms=0.100905Jy sigma=0.000735 ! Inverting map ! Added new window around map position (-111, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112989 Jy ! Component: 100 - total flux cleaned = 0.00880154 Jy ! Component: 150 - total flux cleaned = 0.00713054 Jy ! Component: 200 - total flux cleaned = 0.0056532 Jy ! Total flux subtracted in 200 components = 0.0056532 Jy ! Clean residual min=-0.013052 max=0.012975 Jy/beam ! Clean residual mean=-0.000029 rms=0.003286 Jy/beam ! Combined flux in latest and established models = 1.04306 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 304 components and 1.04306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098632Jy sigma=0.000713 ! Fit after self-cal, rms=0.098510Jy sigma=0.000712 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098510Jy sigma=0.000712 ! Fit after self-cal, rms=0.098113Jy sigma=0.000711 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=9.386 mas, bpa=16.15 degrees ! Estimated noise=1608.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.417183 Jy ! Component: 100 - total flux cleaned = 0.612458 Jy ! Component: 150 - total flux cleaned = 0.719512 Jy ! Component: 200 - total flux cleaned = 0.787183 Jy ! Total flux subtracted in 200 components = 0.787183 Jy ! Clean residual min=-0.036042 max=0.044055 Jy/beam ! Clean residual mean=0.000055 rms=0.010966 Jy/beam ! Combined flux in latest and established models = 0.787183 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.787183 Jy ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=10.49 mas, bpa=13.84 degrees ! Estimated noise=1294.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0624371 Jy ! Component: 100 - total flux cleaned = 0.103474 Jy ! Component: 150 - total flux cleaned = 0.134801 Jy ! Component: 200 - total flux cleaned = 0.156524 Jy ! Total flux subtracted in 200 components = 0.156524 Jy ! Clean residual min=-0.025532 max=0.034315 Jy/beam ! Clean residual mean=0.000014 rms=0.007686 Jy/beam ! Combined flux in latest and established models = 0.943707 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.943707 Jy ! Inverting map ! Added new window around map position (6.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302214 Jy ! Component: 100 - total flux cleaned = 0.0481669 Jy ! Component: 150 - total flux cleaned = 0.0630812 Jy ! Component: 200 - total flux cleaned = 0.0750877 Jy ! Total flux subtracted in 200 components = 0.0750877 Jy ! Clean residual min=-0.019432 max=0.020397 Jy/beam ! Clean residual mean=-0.000005 rms=0.005296 Jy/beam ! Combined flux in latest and established models = 1.01879 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 135 components and 1.01879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.055 mas, bmaj=15.35 mas, bpa=1.426 degrees ! Estimated noise=1560.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172733 Jy ! Component: 100 - total flux cleaned = 0.0245764 Jy ! Component: 150 - total flux cleaned = 0.0312073 Jy ! Component: 200 - total flux cleaned = 0.0353847 Jy ! Total flux subtracted in 200 components = 0.0353847 Jy ! Clean residual min=-0.022271 max=0.020511 Jy/beam ! Clean residual mean=-0.000020 rms=0.005645 Jy/beam ! Combined flux in latest and established models = 1.05418 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185122 Jy ! Component: 100 - total flux cleaned = 0.00185151 Jy ! Component: 150 - total flux cleaned = 0.00106158 Jy ! Component: 200 - total flux cleaned = -3.9221e-05 Jy ! Total flux subtracted in 200 components = -3.9221e-05 Jy ! Clean residual min=-0.020204 max=0.019536 Jy/beam ! Clean residual mean=-0.000022 rms=0.004930 Jy/beam ! Combined flux in latest and established models = 1.05414 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 194 components and 1.05414 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=10.49 mas, bpa=13.84 degrees ! Estimated noise=1294.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00934962 Jy ! Component: 100 - total flux cleaned = 0.0102239 Jy ! Component: 150 - total flux cleaned = 0.0102526 Jy ! Component: 200 - total flux cleaned = 0.0102864 Jy ! Total flux subtracted in 200 components = 0.0102864 Jy ! Clean residual min=-0.014853 max=0.014574 Jy/beam ! Clean residual mean=-0.000019 rms=0.003474 Jy/beam ! Combined flux in latest and established models = 1.06443 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 225 components and 1.06443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099629Jy sigma=0.000717 ! Fit after self-cal, rms=0.099167Jy sigma=0.000713 wmodel J1548-1213_S_2017_07_16_pus_map.mod ! Writing 225 model components to file: J1548-1213_S_2017_07_16_pus_map.mod wobs J1548-1213_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1548-1213_S_2017_07_16_pus_uvs.fits wwins J1548-1213_S_2017_07_16_pus_map.win ! wwins: Wrote 5 windows to J1548-1213_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185491 Jy ! Component: 100 - total flux cleaned = 0.00592502 Jy ! Component: 150 - total flux cleaned = 0.00840329 Jy ! Component: 200 - total flux cleaned = 0.00993404 Jy ! Component: 250 - total flux cleaned = 0.011916 Jy ! Component: 300 - total flux cleaned = 0.013629 Jy ! Component: 350 - total flux cleaned = 0.0147785 Jy ! Component: 400 - total flux cleaned = 0.0161906 Jy ! Component: 450 - total flux cleaned = 0.0169416 Jy ! Component: 500 - total flux cleaned = 0.0182426 Jy ! Component: 550 - total flux cleaned = 0.0192201 Jy ! Component: 600 - total flux cleaned = 0.0198965 Jy ! Component: 650 - total flux cleaned = 0.0204226 Jy ! Component: 700 - total flux cleaned = 0.0211869 Jy ! Component: 750 - total flux cleaned = 0.021682 Jy ! Component: 800 - total flux cleaned = 0.0221675 Jy ! Component: 850 - total flux cleaned = 0.0226404 Jy ! Component: 900 - total flux cleaned = 0.0233277 Jy ! Component: 950 - total flux cleaned = 0.0233292 Jy ! Component: 1000 - total flux cleaned = 0.0235496 Jy ! Component: 1050 - total flux cleaned = 0.0235536 Jy ! Component: 1100 - total flux cleaned = 0.024074 Jy ! Component: 1150 - total flux cleaned = 0.0243798 Jy ! Component: 1200 - total flux cleaned = 0.0249755 Jy ! Component: 1250 - total flux cleaned = 0.0252682 Jy ! Component: 1300 - total flux cleaned = 0.0257455 Jy ! Component: 1350 - total flux cleaned = 0.0261193 Jy ! Component: 1400 - total flux cleaned = 0.0263017 Jy ! Component: 1450 - total flux cleaned = 0.0266599 Jy ! Component: 1500 - total flux cleaned = 0.0269217 Jy ! Component: 1550 - total flux cleaned = 0.0273519 Jy ! Component: 1600 - total flux cleaned = 0.0277731 Jy ! Component: 1650 - total flux cleaned = 0.0282695 Jy ! Component: 1700 - total flux cleaned = 0.0286749 Jy ! Component: 1750 - total flux cleaned = 0.0289149 Jy ! Component: 1800 - total flux cleaned = 0.0295428 Jy ! Component: 1850 - total flux cleaned = 0.0298496 Jy ! Component: 1900 - total flux cleaned = 0.0304546 Jy ! Component: 1950 - total flux cleaned = 0.0308263 Jy ! Component: 2000 - total flux cleaned = 0.0311179 Jy ! Component: 2050 - total flux cleaned = 0.0314768 Jy ! Component: 2100 - total flux cleaned = 0.0319014 Jy ! Component: 2150 - total flux cleaned = 0.0320411 Jy ! Component: 2200 - total flux cleaned = 0.0325223 Jy ! Component: 2250 - total flux cleaned = 0.0327254 Jy ! Component: 2300 - total flux cleaned = 0.0329255 Jy ! Component: 2350 - total flux cleaned = 0.0331894 Jy ! Component: 2400 - total flux cleaned = 0.0333843 Jy ! Component: 2450 - total flux cleaned = 0.0334486 Jy ! Component: 2500 - total flux cleaned = 0.0337644 Jy ! Component: 2550 - total flux cleaned = 0.0338264 Jy ! Component: 2600 - total flux cleaned = 0.0338877 Jy ! Component: 2650 - total flux cleaned = 0.0341314 Jy ! Component: 2700 - total flux cleaned = 0.0341308 Jy ! Component: 2750 - total flux cleaned = 0.0340113 Jy ! Component: 2800 - total flux cleaned = 0.0343073 Jy ! Component: 2850 - total flux cleaned = 0.0344823 Jy ! Component: 2900 - total flux cleaned = 0.0344822 Jy ! Component: 2950 - total flux cleaned = 0.0347123 Jy ! Component: 3000 - total flux cleaned = 0.034826 Jy ! Component: 3050 - total flux cleaned = 0.0348259 Jy ! Component: 3100 - total flux cleaned = 0.0349388 Jy ! Component: 3150 - total flux cleaned = 0.0349956 Jy ! Component: 3200 - total flux cleaned = 0.0350519 Jy ! Component: 3250 - total flux cleaned = 0.0353283 Jy ! Component: 3300 - total flux cleaned = 0.035548 Jy ! Component: 3350 - total flux cleaned = 0.0357113 Jy ! Component: 3400 - total flux cleaned = 0.0358199 Jy ! Component: 3450 - total flux cleaned = 0.0359817 Jy ! Component: 3500 - total flux cleaned = 0.0360893 Jy ! Component: 3550 - total flux cleaned = 0.036196 Jy ! Component: 3600 - total flux cleaned = 0.0364089 Jy ! Component: 3650 - total flux cleaned = 0.0364621 Jy ! Component: 3700 - total flux cleaned = 0.036621 Jy ! Component: 3750 - total flux cleaned = 0.0368319 Jy ! Component: 3800 - total flux cleaned = 0.0368845 Jy ! Component: 3850 - total flux cleaned = 0.0368322 Jy ! Component: 3900 - total flux cleaned = 0.0368847 Jy ! Component: 3950 - total flux cleaned = 0.0369371 Jy ! Component: 4000 - total flux cleaned = 0.0370414 Jy ! Component: 4050 - total flux cleaned = 0.0371461 Jy ! Total flux subtracted in 4096 components = 0.0373028 Jy ! Clean residual min=-0.003024 max=0.003037 Jy/beam ! Clean residual mean=-0.000006 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 1.10173 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 553 components and 1.10173 Jy ![Exited script file: muppet] wmap "J1548-1213_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 10.49 at 13.84 degrees (North through East) ! Clean map min=-0.016133 max=0.56067 Jy/beam ! Writing clean map to FITS file: J1548-1213_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.560669 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000995384 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.532605 0.532605 1.06521 2.13042 4.26084 8.52168 17.0434 34.0867 68.1734 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.56 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 10.49 at 13.84 degrees (North through East) ! Clean map min=-0.016133 max=0.56067 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1548-1213_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:12:48 2019