! Started logfile: J1547-0943_S_2017_04_28_pus_uvs.log on Thu May 2 16:28:49 2019 obs J1547-0943_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1547-0943_S_2017_04_28_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.930924 visibilities/baseline/integration-bin. ! Found source: J1547-0943 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1547-0943_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 347 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.854081Jy sigma=0.559071 ! Fit after self-cal, rms=0.850428Jy sigma=0.559037 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=9.99 mas, bpa=-5.104 degrees ! Estimated noise=409.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408669 Jy ! Component: 100 - total flux cleaned = 0.0391162 Jy ! Total flux subtracted in 100 components = 0.0391162 Jy ! Clean residual min=-0.026885 max=0.023458 Jy/beam ! Clean residual mean=0.000003 rms=0.009118 Jy/beam ! Combined flux in latest and established models = 0.0391162 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0391162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264307Jy sigma=0.022157 ! Fit after self-cal, rms=0.264285Jy sigma=0.022102 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.444 mas, bmaj=15.12 mas, bpa=-1.359 degrees ! Estimated noise=151.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0186671 Jy ! Component: 100 - total flux cleaned = -0.0227147 Jy ! Component: 150 - total flux cleaned = -0.0231809 Jy ! Component: 200 - total flux cleaned = -0.0238238 Jy ! Total flux subtracted in 200 components = -0.0238238 Jy ! Clean residual min=-0.015349 max=0.015479 Jy/beam ! Clean residual mean=0.000021 rms=0.007294 Jy/beam ! Combined flux in latest and established models = 0.0152924 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.0152924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266018Jy sigma=0.010014 ! Fit after self-cal, rms=0.265925Jy sigma=0.009996 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 33.23 HN 1.16 KP 0.32 ! LA 1.12 MK 3.33 NL 0.84 OV 0.66 ! PT 5.14 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 0.32 HN 1.37 KP 0.33 ! LA 0.29 MK 0.98 NL 0.90 OV 0.38 ! PT 0.30 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.64 FD 0.33 HN 1.42 KP 0.36 ! LA 0.30 MK 0.99 NL 0.84 OV 0.34 ! PT 0.29 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.34 HN 1.36 KP 1.00* ! LA 0.18 MK 1.21 NL 1.00* OV 1.00* ! PT 0.30 SC 1.00* ! ! ! Fit before self-cal, rms=0.265925Jy sigma=0.009996 ! Fit after self-cal, rms=3.800441Jy sigma=0.001312 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.823 mas, bmaj=11.26 mas, bpa=-1.168 degrees ! Estimated noise=244.502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00943474 Jy ! Component: 100 - total flux cleaned = 0.0121006 Jy ! Component: 150 - total flux cleaned = 0.0121936 Jy ! Component: 200 - total flux cleaned = 0.0122823 Jy ! Total flux subtracted in 200 components = 0.0122823 Jy ! Clean residual min=-0.003670 max=0.004531 Jy/beam ! Clean residual mean=0.000007 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.0275748 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.0275748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.798991Jy sigma=0.001387 ! Fit after self-cal, rms=3.799191Jy sigma=0.001375 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.799191Jy sigma=0.001375 ! Fit after self-cal, rms=4.552498Jy sigma=0.001227 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.479 mas, bmaj=10.59 mas, bpa=-2.855 degrees ! Estimated noise=302.491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008267 Jy ! Component: 100 - total flux cleaned = 0.0111078 Jy ! Component: 150 - total flux cleaned = 0.011454 Jy ! Component: 200 - total flux cleaned = 0.0115152 Jy ! Total flux subtracted in 200 components = 0.0115152 Jy ! Clean residual min=-0.003916 max=0.004498 Jy/beam ! Clean residual mean=0.000021 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.0390899 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0390899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.551373Jy sigma=0.001258 ! Fit after self-cal, rms=4.551557Jy sigma=0.001255 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203076 Jy ! Component: 100 - total flux cleaned = 0.000319928 Jy ! Component: 150 - total flux cleaned = 0.000428858 Jy ! Component: 200 - total flux cleaned = 0.000481622 Jy ! Total flux subtracted in 200 components = 0.000481622 Jy ! Clean residual min=-0.003801 max=0.004492 Jy/beam ! Clean residual mean=0.000020 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.0395716 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0395716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.551557Jy sigma=0.001256 ! Fit after self-cal, rms=4.551557Jy sigma=0.001256 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.551557Jy sigma=0.001256 ! Fit after self-cal, rms=0.731836Jy sigma=0.001136 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=10.13 mas, bpa=-2.974 degrees ! Estimated noise=320.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380047 Jy ! Component: 100 - total flux cleaned = 0.00575054 Jy ! Component: 150 - total flux cleaned = 0.00648759 Jy ! Component: 200 - total flux cleaned = 0.00664654 Jy ! Total flux subtracted in 200 components = 0.00664654 Jy ! Clean residual min=-0.002961 max=0.003490 Jy/beam ! Clean residual mean=0.000032 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.0462181 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.0462181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.731840Jy sigma=0.001137 ! Fit after self-cal, rms=0.731908Jy sigma=0.001135 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192971 Jy ! Component: 100 - total flux cleaned = 0.000267203 Jy ! Component: 150 - total flux cleaned = 0.000337486 Jy ! Component: 200 - total flux cleaned = 0.000371759 Jy ! Total flux subtracted in 200 components = 0.000371759 Jy ! Clean residual min=-0.002991 max=0.003373 Jy/beam ! Clean residual mean=0.000032 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.0465899 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.0465899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.731893Jy sigma=0.001135 ! Fit after self-cal, rms=0.731889Jy sigma=0.001135 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.731889Jy sigma=0.001135 ! Fit after self-cal, rms=0.740448Jy sigma=0.001128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.121 mas, bmaj=16.27 mas, bpa=5.103 degrees ! Estimated noise=331.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453673 Jy ! Component: 100 - total flux cleaned = 0.00665199 Jy ! Component: 150 - total flux cleaned = 0.00769894 Jy ! Component: 200 - total flux cleaned = 0.00795742 Jy ! Total flux subtracted in 200 components = 0.00795742 Jy ! Clean residual min=-0.004116 max=0.004067 Jy/beam ! Clean residual mean=0.000055 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.0545473 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0545473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.740459Jy sigma=0.001132 ! Fit after self-cal, rms=0.740460Jy sigma=0.001132 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181856 Jy ! Component: 100 - total flux cleaned = 0.000232282 Jy ! Component: 150 - total flux cleaned = 0.000275705 Jy ! Component: 200 - total flux cleaned = 0.000296972 Jy ! Total flux subtracted in 200 components = 0.000296972 Jy ! Clean residual min=-0.004065 max=0.004060 Jy/beam ! Clean residual mean=0.000055 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.0548443 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.0548443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.740457Jy sigma=0.001132 ! Fit after self-cal, rms=0.740458Jy sigma=0.001132 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=9.831 mas, bpa=-3.041 degrees ! Estimated noise=335.306 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.087 x 9.831 at -3.041 degrees (North through East) ! Clean map min=-0.0066887 max=0.068377 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=8.044 mas, bpa=-3.604 degrees ! Estimated noise=501.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520935 Jy ! Component: 100 - total flux cleaned = 0.0591579 Jy ! Component: 150 - total flux cleaned = 0.057381 Jy ! Component: 200 - total flux cleaned = 0.0562108 Jy ! Total flux subtracted in 200 components = 0.0562108 Jy ! Clean residual min=-0.004612 max=0.005207 Jy/beam ! Clean residual mean=0.000007 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0562108 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0562108 Jy ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=9.831 mas, bpa=-3.041 degrees ! Estimated noise=335.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.48125e-05 Jy ! Component: 100 - total flux cleaned = -0.000516938 Jy ! Component: 150 - total flux cleaned = -0.000756691 Jy ! Component: 200 - total flux cleaned = -0.000753794 Jy ! Total flux subtracted in 200 components = -0.000753794 Jy ! Clean residual min=-0.003364 max=0.004276 Jy/beam ! Clean residual mean=0.000033 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.055457 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.055457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.121 mas, bmaj=16.27 mas, bpa=5.103 degrees ! Estimated noise=331.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892735 Jy ! Component: 100 - total flux cleaned = 0.000719117 Jy ! Component: 150 - total flux cleaned = 0.0005583 Jy ! Component: 200 - total flux cleaned = 0.000524878 Jy ! Total flux subtracted in 200 components = 0.000524878 Jy ! Clean residual min=-0.004128 max=0.004193 Jy/beam ! Clean residual mean=0.000054 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.0559819 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19927e-07 Jy ! Component: 100 - total flux cleaned = 2.12976e-05 Jy ! Component: 150 - total flux cleaned = 2.04313e-05 Jy ! Component: 200 - total flux cleaned = 1.94348e-05 Jy ! Total flux subtracted in 200 components = 1.94348e-05 Jy ! Clean residual min=-0.004081 max=0.004149 Jy/beam ! Clean residual mean=0.000054 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 0.0560013 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.0560013 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=9.831 mas, bpa=-3.041 degrees ! Estimated noise=335.306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.53541e-05 Jy ! Component: 100 - total flux cleaned = 9.76198e-05 Jy ! Component: 150 - total flux cleaned = 0.000163319 Jy ! Component: 200 - total flux cleaned = 0.000222755 Jy ! Total flux subtracted in 200 components = 0.000222755 Jy ! Clean residual min=-0.003207 max=0.003465 Jy/beam ! Clean residual mean=0.000032 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.0562241 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0562241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.740582Jy sigma=0.001135 ! Fit after self-cal, rms=0.740614Jy sigma=0.001135 wmodel J1547-0943_S_2017_04_28_pus_map.mod ! Writing 52 model components to file: J1547-0943_S_2017_04_28_pus_map.mod wobs J1547-0943_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1547-0943_S_2017_04_28_pus_uvs.fits wwins J1547-0943_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J1547-0943_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134516 Jy ! Component: 100 - total flux cleaned = 0.00240277 Jy ! Component: 150 - total flux cleaned = 0.00290216 Jy ! Component: 200 - total flux cleaned = 0.0034816 Jy ! Component: 250 - total flux cleaned = 0.00404082 Jy ! Component: 300 - total flux cleaned = 0.00448328 Jy ! Component: 350 - total flux cleaned = 0.00491292 Jy ! Component: 400 - total flux cleaned = 0.00537793 Jy ! Component: 450 - total flux cleaned = 0.00596665 Jy ! Component: 500 - total flux cleaned = 0.00645239 Jy ! Component: 550 - total flux cleaned = 0.00684183 Jy ! Component: 600 - total flux cleaned = 0.00730704 Jy ! Component: 650 - total flux cleaned = 0.00759742 Jy ! Component: 700 - total flux cleaned = 0.00800334 Jy ! Component: 750 - total flux cleaned = 0.00836205 Jy ! Component: 800 - total flux cleaned = 0.00871452 Jy ! Component: 850 - total flux cleaned = 0.00917599 Jy ! Component: 900 - total flux cleaned = 0.00951566 Jy ! Component: 950 - total flux cleaned = 0.00988709 Jy ! Component: 1000 - total flux cleaned = 0.0102528 Jy ! Component: 1050 - total flux cleaned = 0.0106478 Jy ! Component: 1100 - total flux cleaned = 0.0110371 Jy ! Component: 1150 - total flux cleaned = 0.0114198 Jy ! Component: 1200 - total flux cleaned = 0.0116938 Jy ! Component: 1250 - total flux cleaned = 0.0120652 Jy ! Component: 1300 - total flux cleaned = 0.0122973 Jy ! Component: 1350 - total flux cleaned = 0.0125913 Jy ! Component: 1400 - total flux cleaned = 0.0128816 Jy ! Component: 1450 - total flux cleaned = 0.0131995 Jy ! Component: 1500 - total flux cleaned = 0.0133871 Jy ! Component: 1550 - total flux cleaned = 0.0136349 Jy ! Component: 1600 - total flux cleaned = 0.013879 Jy ! Component: 1650 - total flux cleaned = 0.0141497 Jy ! Component: 1700 - total flux cleaned = 0.014209 Jy ! Component: 1750 - total flux cleaned = 0.0145615 Jy ! Component: 1800 - total flux cleaned = 0.014677 Jy ! Component: 1850 - total flux cleaned = 0.0149066 Jy ! Component: 1900 - total flux cleaned = 0.0149912 Jy ! Component: 1950 - total flux cleaned = 0.0151032 Jy ! Component: 2000 - total flux cleaned = 0.0152965 Jy ! Component: 2050 - total flux cleaned = 0.0154329 Jy ! Component: 2100 - total flux cleaned = 0.0155413 Jy ! Component: 2150 - total flux cleaned = 0.0157016 Jy ! Component: 2200 - total flux cleaned = 0.0158071 Jy ! Component: 2250 - total flux cleaned = 0.0159897 Jy ! Component: 2300 - total flux cleaned = 0.0160666 Jy ! Component: 2350 - total flux cleaned = 0.0161432 Jy ! Component: 2400 - total flux cleaned = 0.0162442 Jy ! Component: 2450 - total flux cleaned = 0.0164436 Jy ! Component: 2500 - total flux cleaned = 0.0164681 Jy ! Component: 2550 - total flux cleaned = 0.0165902 Jy ! Component: 2600 - total flux cleaned = 0.0167349 Jy ! Component: 2650 - total flux cleaned = 0.0167823 Jy ! Component: 2700 - total flux cleaned = 0.0168536 Jy ! Component: 2750 - total flux cleaned = 0.0168538 Jy ! Component: 2800 - total flux cleaned = 0.0169234 Jy ! Component: 2850 - total flux cleaned = 0.0170382 Jy ! Component: 2900 - total flux cleaned = 0.0171514 Jy ! Component: 2950 - total flux cleaned = 0.0171738 Jy ! Component: 3000 - total flux cleaned = 0.0172182 Jy ! Component: 3050 - total flux cleaned = 0.0172404 Jy ! Component: 3100 - total flux cleaned = 0.0173933 Jy ! Component: 3150 - total flux cleaned = 0.0174365 Jy ! Component: 3200 - total flux cleaned = 0.0176079 Jy ! Component: 3250 - total flux cleaned = 0.0176712 Jy ! Component: 3300 - total flux cleaned = 0.0177341 Jy ! Component: 3350 - total flux cleaned = 0.0177132 Jy ! Component: 3400 - total flux cleaned = 0.0177958 Jy ! Component: 3450 - total flux cleaned = 0.0178979 Jy ! Component: 3500 - total flux cleaned = 0.0179992 Jy ! Component: 3550 - total flux cleaned = 0.0180795 Jy ! Component: 3600 - total flux cleaned = 0.018159 Jy ! Component: 3650 - total flux cleaned = 0.0181787 Jy ! Component: 3700 - total flux cleaned = 0.0182378 Jy ! Component: 3750 - total flux cleaned = 0.0182959 Jy ! Component: 3800 - total flux cleaned = 0.018392 Jy ! Component: 3850 - total flux cleaned = 0.0185251 Jy ! Component: 3900 - total flux cleaned = 0.0185252 Jy ! Component: 3950 - total flux cleaned = 0.0185815 Jy ! Component: 4000 - total flux cleaned = 0.0185817 Jy ! Component: 4050 - total flux cleaned = 0.0186735 Jy ! Total flux subtracted in 4096 components = 0.0187649 Jy ! Clean residual min=-0.001084 max=0.000909 Jy/beam ! Clean residual mean=0.000024 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.074989 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 374 components and 0.074989 Jy ![Exited script file: muppet] wmap "J1547-0943_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.087 x 9.831 at -3.041 degrees (North through East) ! Clean map min=-0.0049523 max=0.066604 Jy/beam ! Writing clean map to FITS file: J1547-0943_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0666041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000380844 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.71541 1.71541 3.43082 6.86164 13.7233 27.4465 54.8931 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.087 x 9.831 at -3.041 degrees (North through East) ! Clean map min=-0.0049523 max=0.066604 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1547-0943_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:28:54 2019