! Started logfile: J1547+4937_S_2017_09_26_pus_uvs.log on Sat May 11 13:02:54 2019 obs J1547+4937_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1547+4937_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.872921 visibilities/baseline/integration-bin. ! Found source: J1547+4937 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 36956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1547+4937_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 363 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1563 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.990471Jy sigma=0.009128 ! Fit after self-cal, rms=0.958617Jy sigma=0.008848 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=4.619 mas, bpa=-35.5 degrees ! Estimated noise=855.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308309 Jy ! Component: 100 - total flux cleaned = 0.0385636 Jy ! Total flux subtracted in 100 components = 0.0385636 Jy ! Clean residual min=-0.004309 max=0.004334 Jy/beam ! Clean residual mean=-0.000085 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.0385636 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0385636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078828Jy sigma=0.000696 ! Fit after self-cal, rms=0.077818Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.585 mas, bmaj=5.691 mas, bpa=-31.01 degrees ! Estimated noise=469.901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101794 Jy ! Component: 100 - total flux cleaned = 0.0163518 Jy ! Component: 150 - total flux cleaned = 0.020242 Jy ! Component: 200 - total flux cleaned = 0.0227028 Jy ! Total flux subtracted in 200 components = 0.0227028 Jy ! Clean residual min=-0.006006 max=0.007113 Jy/beam ! Clean residual mean=-0.000256 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.0612664 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.0612664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076454Jy sigma=0.000673 ! Fit after self-cal, rms=0.076254Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.86 HN 1.07 KP 1.08 ! LA 0.75 MK 1.14 NL 1.37 OV 1.52 ! PT 0.72 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.96 HN 1.03 KP 1.01 ! LA 0.71 MK 1.08 NL 1.45 OV 1.46 ! PT 0.75 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.91 HN 1.01 KP 1.01 ! LA 0.76 MK 1.18 NL 1.43 OV 1.43 ! PT 0.69 ! ! ! Correcting IF 4. ! A total of 246 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 0.95 KP 1.00* ! LA 0.64 MK 0.99 NL 1.00* OV 1.00* ! PT 0.61 ! ! ! Fit before self-cal, rms=0.076254Jy sigma=0.000671 ! Fit after self-cal, rms=0.086336Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.736 mas, bmaj=5.867 mas, bpa=-28.35 degrees ! Estimated noise=479.438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337133 Jy ! Component: 100 - total flux cleaned = 0.000416883 Jy ! Component: 150 - total flux cleaned = 0.000454711 Jy ! Component: 200 - total flux cleaned = 0.00049047 Jy ! Total flux subtracted in 200 components = 0.00049047 Jy ! Clean residual min=-0.004748 max=0.006887 Jy/beam ! Clean residual mean=-0.000202 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.0617569 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0617569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086303Jy sigma=0.000653 ! Fit after self-cal, rms=0.087754Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087754Jy sigma=0.000647 ! Fit after self-cal, rms=0.107208Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.754 mas, bmaj=5.956 mas, bpa=-31.83 degrees ! Estimated noise=500.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011677 Jy ! Component: 100 - total flux cleaned = 0.00135762 Jy ! Component: 150 - total flux cleaned = 0.00142483 Jy ! Component: 200 - total flux cleaned = 0.00145466 Jy ! Total flux subtracted in 200 components = 0.00145466 Jy ! Clean residual min=-0.004157 max=0.004700 Jy/beam ! Clean residual mean=-0.000039 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0632115 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.0632116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107147Jy sigma=0.000637 ! Fit after self-cal, rms=0.108279Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, -23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364255 Jy ! Component: 100 - total flux cleaned = 0.00402584 Jy ! Component: 150 - total flux cleaned = 0.00402879 Jy ! Component: 200 - total flux cleaned = 0.00402851 Jy ! Total flux subtracted in 200 components = 0.00402851 Jy ! Clean residual min=-0.003465 max=0.003382 Jy/beam ! Clean residual mean=-0.000026 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.0672401 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.0672401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108151Jy sigma=0.000634 ! Fit after self-cal, rms=0.107772Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107772Jy sigma=0.000633 ! Fit after self-cal, rms=0.106472Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.703 mas, bmaj=5.896 mas, bpa=-31.76 degrees ! Estimated noise=494.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247107 Jy ! Component: 100 - total flux cleaned = 0.00287221 Jy ! Component: 150 - total flux cleaned = 0.00318011 Jy ! Component: 200 - total flux cleaned = 0.00339953 Jy ! Total flux subtracted in 200 components = 0.00339953 Jy ! Clean residual min=-0.003319 max=0.002881 Jy/beam ! Clean residual mean=-0.000013 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0706396 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.0706396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106392Jy sigma=0.000631 ! Fit after self-cal, rms=0.106137Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125661 Jy ! Component: 100 - total flux cleaned = 0.00150181 Jy ! Component: 150 - total flux cleaned = 0.00150136 Jy ! Component: 200 - total flux cleaned = 0.00147066 Jy ! Total flux subtracted in 200 components = 0.00147066 Jy ! Clean residual min=-0.003199 max=0.002611 Jy/beam ! Clean residual mean=-0.000008 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0721103 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.0721103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106083Jy sigma=0.000631 ! Fit after self-cal, rms=0.105925Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105925Jy sigma=0.000630 ! Fit after self-cal, rms=0.102217Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.806 mas, bmaj=9.744 mas, bpa=27.42 degrees ! Estimated noise=555.262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145929 Jy ! Component: 100 - total flux cleaned = 0.00166818 Jy ! Component: 150 - total flux cleaned = 0.00185487 Jy ! Component: 200 - total flux cleaned = 0.00194082 Jy ! Total flux subtracted in 200 components = 0.00194082 Jy ! Clean residual min=-0.004318 max=0.003097 Jy/beam ! Clean residual mean=-0.000028 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0740511 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.0740511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102187Jy sigma=0.000630 ! Fit after self-cal, rms=0.101963Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060153 Jy ! Component: 100 - total flux cleaned = 0.000711707 Jy ! Component: 150 - total flux cleaned = 0.00073305 Jy ! Component: 200 - total flux cleaned = 0.000714791 Jy ! Total flux subtracted in 200 components = 0.000714791 Jy ! Clean residual min=-0.004261 max=0.003092 Jy/beam ! Clean residual mean=-0.000023 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.0747659 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.0747659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101941Jy sigma=0.000629 ! Fit after self-cal, rms=0.101861Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.702 mas, bmaj=5.861 mas, bpa=-30.53 degrees ! Estimated noise=489.316 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.702 x 5.861 at -30.53 degrees (North through East) ! Clean map min=-0.004602 max=0.042202 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=4.676 mas, bpa=-38.8 degrees ! Estimated noise=926.549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032609 Jy ! Component: 100 - total flux cleaned = 0.044694 Jy ! Component: 150 - total flux cleaned = 0.0534416 Jy ! Component: 200 - total flux cleaned = 0.0599922 Jy ! Total flux subtracted in 200 components = 0.0599922 Jy ! Clean residual min=-0.003554 max=0.004572 Jy/beam ! Clean residual mean=-0.000025 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.0599922 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0599922 Jy ! Inverting map and beam ! Estimated beam: bmin=4.702 mas, bmaj=5.861 mas, bpa=-30.53 degrees ! Estimated noise=489.316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602865 Jy ! Component: 100 - total flux cleaned = 0.00925861 Jy ! Component: 150 - total flux cleaned = 0.0107101 Jy ! Component: 200 - total flux cleaned = 0.0117842 Jy ! Total flux subtracted in 200 components = 0.0117842 Jy ! Clean residual min=-0.003425 max=0.002802 Jy/beam ! Clean residual mean=-0.000025 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0717764 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.0717764 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.806 mas, bmaj=9.744 mas, bpa=27.42 degrees ! Estimated noise=555.262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126526 Jy ! Component: 100 - total flux cleaned = 0.00175126 Jy ! Component: 150 - total flux cleaned = 0.0021858 Jy ! Component: 200 - total flux cleaned = 0.00248903 Jy ! Total flux subtracted in 200 components = 0.00248903 Jy ! Clean residual min=-0.004320 max=0.002900 Jy/beam ! Clean residual mean=-0.000026 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.0742654 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017723 Jy ! Component: 100 - total flux cleaned = 0.000209213 Jy ! Component: 150 - total flux cleaned = 0.000265182 Jy ! Component: 200 - total flux cleaned = 0.000313467 Jy ! Total flux subtracted in 200 components = 0.000313467 Jy ! Clean residual min=-0.004227 max=0.002903 Jy/beam ! Clean residual mean=-0.000024 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0745789 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 79 components and 0.0745789 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.702 mas, bmaj=5.861 mas, bpa=-30.53 degrees ! Estimated noise=489.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339146 Jy ! Component: 100 - total flux cleaned = 0.000264525 Jy ! Component: 150 - total flux cleaned = 0.000322447 Jy ! Component: 200 - total flux cleaned = 0.000347748 Jy ! Total flux subtracted in 200 components = 0.000347748 Jy ! Clean residual min=-0.003067 max=0.002306 Jy/beam ! Clean residual mean=-0.000011 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0749266 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.0749266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101826Jy sigma=0.000629 ! Fit after self-cal, rms=0.101698Jy sigma=0.000629 wmodel J1547+4937_S_2017_09_26_pus_map.mod ! Writing 98 model components to file: J1547+4937_S_2017_09_26_pus_map.mod wobs J1547+4937_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1547+4937_S_2017_09_26_pus_uvs.fits wwins J1547+4937_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J1547+4937_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000770496 Jy ! Component: 100 - total flux cleaned = -0.000568183 Jy ! Component: 150 - total flux cleaned = -0.000310811 Jy ! Component: 200 - total flux cleaned = -0.000139194 Jy ! Component: 250 - total flux cleaned = 8.79339e-05 Jy ! Component: 300 - total flux cleaned = 0.00042931 Jy ! Component: 350 - total flux cleaned = 0.000754562 Jy ! Component: 400 - total flux cleaned = 0.00100909 Jy ! Component: 450 - total flux cleaned = 0.00122783 Jy ! Component: 500 - total flux cleaned = 0.00133293 Jy ! Component: 550 - total flux cleaned = 0.00145995 Jy ! Component: 600 - total flux cleaned = 0.00153348 Jy ! Component: 650 - total flux cleaned = 0.00165325 Jy ! Component: 700 - total flux cleaned = 0.00174649 Jy ! Component: 750 - total flux cleaned = 0.00197292 Jy ! Component: 800 - total flux cleaned = 0.00212763 Jy ! Component: 850 - total flux cleaned = 0.00232187 Jy ! Component: 900 - total flux cleaned = 0.00251187 Jy ! Component: 950 - total flux cleaned = 0.00265674 Jy ! Component: 1000 - total flux cleaned = 0.00283872 Jy ! Component: 1050 - total flux cleaned = 0.0028977 Jy ! Component: 1100 - total flux cleaned = 0.0029757 Jy ! Component: 1150 - total flux cleaned = 0.00309012 Jy ! Component: 1200 - total flux cleaned = 0.00316444 Jy ! Component: 1250 - total flux cleaned = 0.0032188 Jy ! Component: 1300 - total flux cleaned = 0.00327257 Jy ! Component: 1350 - total flux cleaned = 0.00332517 Jy ! Component: 1400 - total flux cleaned = 0.00335969 Jy ! Component: 1450 - total flux cleaned = 0.0033768 Jy ! Component: 1500 - total flux cleaned = 0.00342616 Jy ! Component: 1550 - total flux cleaned = 0.003361 Jy ! Component: 1600 - total flux cleaned = 0.00334511 Jy ! Component: 1650 - total flux cleaned = 0.00332919 Jy ! Component: 1700 - total flux cleaned = 0.00320444 Jy ! Component: 1750 - total flux cleaned = 0.00314312 Jy ! Component: 1800 - total flux cleaned = 0.00309773 Jy ! Component: 1850 - total flux cleaned = 0.00306788 Jy ! Component: 1900 - total flux cleaned = 0.00303805 Jy ! Component: 1950 - total flux cleaned = 0.00302305 Jy ! Component: 2000 - total flux cleaned = 0.00295119 Jy ! Component: 2050 - total flux cleaned = 0.00293699 Jy ! Component: 2100 - total flux cleaned = 0.00288097 Jy ! Component: 2150 - total flux cleaned = 0.00286711 Jy ! Component: 2200 - total flux cleaned = 0.00281266 Jy ! Component: 2250 - total flux cleaned = 0.00277264 Jy ! Component: 2300 - total flux cleaned = 0.00273272 Jy ! Component: 2350 - total flux cleaned = 0.00269311 Jy ! Component: 2400 - total flux cleaned = 0.00261499 Jy ! Component: 2450 - total flux cleaned = 0.00255072 Jy ! Component: 2500 - total flux cleaned = 0.00252543 Jy ! Component: 2550 - total flux cleaned = 0.00251272 Jy ! Component: 2600 - total flux cleaned = 0.00243796 Jy ! Component: 2650 - total flux cleaned = 0.00246279 Jy ! Component: 2700 - total flux cleaned = 0.00237737 Jy ! Component: 2750 - total flux cleaned = 0.00236541 Jy ! Component: 2800 - total flux cleaned = 0.00231764 Jy ! Component: 2850 - total flux cleaned = 0.00227029 Jy ! Component: 2900 - total flux cleaned = 0.00223521 Jy ! Component: 2950 - total flux cleaned = 0.00217753 Jy ! Component: 3000 - total flux cleaned = 0.00214325 Jy ! Component: 3050 - total flux cleaned = 0.0021091 Jy ! Component: 3100 - total flux cleaned = 0.00206414 Jy ! Component: 3150 - total flux cleaned = 0.00197508 Jy ! Component: 3200 - total flux cleaned = 0.00193104 Jy ! Component: 3250 - total flux cleaned = 0.00188731 Jy ! Component: 3300 - total flux cleaned = 0.00181151 Jy ! Component: 3350 - total flux cleaned = 0.0017579 Jy ! Component: 3400 - total flux cleaned = 0.00172618 Jy ! Component: 3450 - total flux cleaned = 0.00169444 Jy ! Component: 3500 - total flux cleaned = 0.00164203 Jy ! Component: 3550 - total flux cleaned = 0.00160042 Jy ! Component: 3600 - total flux cleaned = 0.00160037 Jy ! Component: 3650 - total flux cleaned = 0.00155923 Jy ! Component: 3700 - total flux cleaned = 0.00152871 Jy ! Component: 3750 - total flux cleaned = 0.00150851 Jy ! Component: 3800 - total flux cleaned = 0.00151863 Jy ! Component: 3850 - total flux cleaned = 0.00151862 Jy ! Component: 3900 - total flux cleaned = 0.0014591 Jy ! Component: 3950 - total flux cleaned = 0.00147881 Jy ! Component: 4000 - total flux cleaned = 0.00143967 Jy ! Component: 4050 - total flux cleaned = 0.00140069 Jy ! Total flux subtracted in 4096 components = 0.00139107 Jy ! Clean residual min=-0.000617 max=0.000506 Jy/beam ! Clean residual mean=-0.000004 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.0763177 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 399 components and 0.0763177 Jy ![Exited script file: muppet] wmap "J1547+4937_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.702 x 5.861 at -30.53 degrees (North through East) ! Clean map min=-0.0045348 max=0.042751 Jy/beam ! Writing clean map to FITS file: J1547+4937_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0427515 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174721 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22607 1.22607 2.45214 4.90428 9.80856 19.6171 39.2342 78.4685 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.702 x 5.861 at -30.53 degrees (North through East) ! Clean map min=-0.0045348 max=0.042751 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1547+4937_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:03:00 2019