! Started logfile: J1544-2312_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:32 2019 obs J1544-2312_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1544-2312_S_2017_01_21_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.660453 visibilities/baseline/integration-bin. ! Found source: J1544-2312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 7228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1544-2312_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.862040Jy sigma=0.005071 ! Fit after self-cal, rms=0.849968Jy sigma=0.005014 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.2 mas, bmaj=5.967 mas, bpa=-6.268 degrees ! Estimated noise=2290.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120966 Jy ! Component: 100 - total flux cleaned = 0.153753 Jy ! Total flux subtracted in 100 components = 0.153753 Jy ! Clean residual min=-0.009133 max=0.013599 Jy/beam ! Clean residual mean=-0.000070 rms=0.002605 Jy/beam ! Combined flux in latest and established models = 0.153753 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.153753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127910Jy sigma=0.000671 ! Fit after self-cal, rms=0.127914Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.787 mas, bpa=-5.415 degrees ! Estimated noise=1545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175509 Jy ! Component: 100 - total flux cleaned = 0.0247509 Jy ! Component: 150 - total flux cleaned = 0.0290329 Jy ! Component: 200 - total flux cleaned = 0.0317694 Jy ! Total flux subtracted in 200 components = 0.0317694 Jy ! Clean residual min=-0.005675 max=0.007527 Jy/beam ! Clean residual mean=-0.000077 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.185523 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 0.185523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126166Jy sigma=0.000654 ! Fit after self-cal, rms=0.126198Jy sigma=0.000654 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 LA 0.99 ! MK 0.99 NL 0.99 OV 1.25 PT 0.98 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.10 LA 0.95 ! MK 0.94 NL 1.00 OV 1.20 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.08 LA 0.93 ! MK 1.04 NL 0.99 OV 1.27 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.01 LA 0.87 ! MK 1.08 NL 1.00* OV 1.19 PT 0.91 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.126198Jy sigma=0.000654 ! Fit after self-cal, rms=0.134120Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.805 mas, bpa=-5.366 degrees ! Estimated noise=1534.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000531196 Jy ! Component: 100 - total flux cleaned = 0.000320139 Jy ! Component: 150 - total flux cleaned = 0.000145062 Jy ! Component: 200 - total flux cleaned = 3.97197e-05 Jy ! Total flux subtracted in 200 components = 3.97197e-05 Jy ! Clean residual min=-0.004480 max=0.004952 Jy/beam ! Clean residual mean=-0.000020 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.185562 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.185562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134106Jy sigma=0.000649 ! Fit after self-cal, rms=0.134546Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134546Jy sigma=0.000648 ! Fit after self-cal, rms=0.135681Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=6.81 mas, bpa=-5.461 degrees ! Estimated noise=1535.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434037 Jy ! Component: 100 - total flux cleaned = 0.000434328 Jy ! Component: 150 - total flux cleaned = 0.000415492 Jy ! Component: 200 - total flux cleaned = 0.000430575 Jy ! Total flux subtracted in 200 components = 0.000430575 Jy ! Clean residual min=-0.004227 max=0.004383 Jy/beam ! Clean residual mean=-0.000012 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.185993 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.185993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135673Jy sigma=0.000648 ! Fit after self-cal, rms=0.135750Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.53752e-05 Jy ! Component: 100 - total flux cleaned = 1.36064e-06 Jy ! Component: 150 - total flux cleaned = -2.55366e-05 Jy ! Component: 200 - total flux cleaned = -3.7417e-05 Jy ! Total flux subtracted in 200 components = -3.7417e-05 Jy ! Clean residual min=-0.004222 max=0.004371 Jy/beam ! Clean residual mean=-0.000012 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.185956 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.185956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135746Jy sigma=0.000648 ! Fit after self-cal, rms=0.135745Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135745Jy sigma=0.000648 ! Fit after self-cal, rms=0.135794Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=6.813 mas, bpa=-5.587 degrees ! Estimated noise=1532.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261324 Jy ! Component: 100 - total flux cleaned = 0.00025991 Jy ! Component: 150 - total flux cleaned = 0.00027268 Jy ! Component: 200 - total flux cleaned = 0.000295887 Jy ! Total flux subtracted in 200 components = 0.000295887 Jy ! Clean residual min=-0.004106 max=0.004251 Jy/beam ! Clean residual mean=-0.000009 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.186251 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.186251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135787Jy sigma=0.000647 ! Fit after self-cal, rms=0.135818Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5998e-05 Jy ! Component: 100 - total flux cleaned = -7.47182e-06 Jy ! Component: 150 - total flux cleaned = -1.78435e-05 Jy ! Component: 200 - total flux cleaned = -8.51479e-06 Jy ! Total flux subtracted in 200 components = -8.51479e-06 Jy ! Clean residual min=-0.004106 max=0.004224 Jy/beam ! Clean residual mean=-0.000009 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.186243 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.186243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135817Jy sigma=0.000647 ! Fit after self-cal, rms=0.135816Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135816Jy sigma=0.000647 ! Fit after self-cal, rms=0.135672Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.499 mas, bmaj=14.72 mas, bpa=4.208 degrees ! Estimated noise=2190.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114806 Jy ! Component: 100 - total flux cleaned = 0.0011521 Jy ! Component: 150 - total flux cleaned = 0.0011537 Jy ! Component: 200 - total flux cleaned = 0.00118225 Jy ! Total flux subtracted in 200 components = 0.00118225 Jy ! Clean residual min=-0.005930 max=0.006827 Jy/beam ! Clean residual mean=-0.000020 rms=0.001968 Jy/beam ! Combined flux in latest and established models = 0.187425 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 53 components and 0.187425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135682Jy sigma=0.000647 ! Fit after self-cal, rms=0.135680Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176991 Jy ! Component: 100 - total flux cleaned = 0.000172301 Jy ! Component: 150 - total flux cleaned = 0.000169196 Jy ! Component: 200 - total flux cleaned = 0.000181637 Jy ! Total flux subtracted in 200 components = 0.000181637 Jy ! Clean residual min=-0.005873 max=0.006751 Jy/beam ! Clean residual mean=-0.000018 rms=0.001959 Jy/beam ! Combined flux in latest and established models = 0.187607 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.187607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135690Jy sigma=0.000647 ! Fit after self-cal, rms=0.135686Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.814 mas, bpa=-5.693 degrees ! Estimated noise=1530.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.605 x 6.814 at -5.693 degrees (North through East) ! Clean map min=-0.0038854 max=0.15547 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.201 mas, bmaj=5.986 mas, bpa=-6.329 degrees ! Estimated noise=2278.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119718 Jy ! Component: 100 - total flux cleaned = 0.153433 Jy ! Component: 150 - total flux cleaned = 0.167748 Jy ! Component: 200 - total flux cleaned = 0.174116 Jy ! Total flux subtracted in 200 components = 0.174116 Jy ! Clean residual min=-0.006075 max=0.006294 Jy/beam ! Clean residual mean=-0.000019 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.174116 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.174116 Jy ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.814 mas, bpa=-5.693 degrees ! Estimated noise=1530.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577553 Jy ! Component: 100 - total flux cleaned = 0.00834453 Jy ! Component: 150 - total flux cleaned = 0.00984147 Jy ! Component: 200 - total flux cleaned = 0.0107697 Jy ! Total flux subtracted in 200 components = 0.0107697 Jy ! Clean residual min=-0.004249 max=0.004438 Jy/beam ! Clean residual mean=-0.000013 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.184885 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 40 components and 0.184885 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.499 mas, bmaj=14.72 mas, bpa=4.208 degrees ! Estimated noise=2190.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185313 Jy ! Component: 100 - total flux cleaned = 0.00209258 Jy ! Component: 150 - total flux cleaned = 0.00213059 Jy ! Component: 200 - total flux cleaned = 0.00218341 Jy ! Total flux subtracted in 200 components = 0.00218341 Jy ! Clean residual min=-0.005965 max=0.006851 Jy/beam ! Clean residual mean=-0.000022 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.187069 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.98315e-05 Jy ! Component: 100 - total flux cleaned = 8.18513e-05 Jy ! Component: 150 - total flux cleaned = 0.000126851 Jy ! Component: 200 - total flux cleaned = 0.000169543 Jy ! Total flux subtracted in 200 components = 0.000169543 Jy ! Clean residual min=-0.005939 max=0.006790 Jy/beam ! Clean residual mean=-0.000021 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.187238 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.187238 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.814 mas, bpa=-5.693 degrees ! Estimated noise=1530.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122075 Jy ! Component: 100 - total flux cleaned = -0.00121977 Jy ! Component: 150 - total flux cleaned = -0.00117199 Jy ! Component: 200 - total flux cleaned = -0.00115014 Jy ! Total flux subtracted in 200 components = -0.00115014 Jy ! Clean residual min=-0.004149 max=0.004236 Jy/beam ! Clean residual mean=-0.000010 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.186088 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.186088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135694Jy sigma=0.000647 ! Fit after self-cal, rms=0.135685Jy sigma=0.000647 wmodel J1544-2312_S_2017_01_21_pus_map.mod ! Writing 52 model components to file: J1544-2312_S_2017_01_21_pus_map.mod wobs J1544-2312_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1544-2312_S_2017_01_21_pus_uvs.fits wwins J1544-2312_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1544-2312_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932038 Jy ! Component: 100 - total flux cleaned = 0.00155194 Jy ! Component: 150 - total flux cleaned = 0.00174446 Jy ! Component: 200 - total flux cleaned = 0.00168506 Jy ! Component: 250 - total flux cleaned = 0.00162817 Jy ! Component: 300 - total flux cleaned = 0.00141124 Jy ! Component: 350 - total flux cleaned = 0.00135941 Jy ! Component: 400 - total flux cleaned = 0.00111256 Jy ! Component: 450 - total flux cleaned = 0.00101914 Jy ! Component: 500 - total flux cleaned = 0.00115672 Jy ! Component: 550 - total flux cleaned = 0.00120006 Jy ! Component: 600 - total flux cleaned = 0.0012858 Jy ! Component: 650 - total flux cleaned = 0.00141157 Jy ! Component: 700 - total flux cleaned = 0.00137081 Jy ! Component: 750 - total flux cleaned = 0.0013713 Jy ! Component: 800 - total flux cleaned = 0.00137195 Jy ! Component: 850 - total flux cleaned = 0.00133447 Jy ! Component: 900 - total flux cleaned = 0.00133417 Jy ! Component: 950 - total flux cleaned = 0.00118925 Jy ! Component: 1000 - total flux cleaned = 0.00111761 Jy ! Component: 1050 - total flux cleaned = 0.000977356 Jy ! Component: 1100 - total flux cleaned = 0.000840763 Jy ! Component: 1150 - total flux cleaned = 0.000807696 Jy ! Component: 1200 - total flux cleaned = 0.00074109 Jy ! Component: 1250 - total flux cleaned = 0.000610422 Jy ! Component: 1300 - total flux cleaned = 0.00061027 Jy ! Component: 1350 - total flux cleaned = 0.000547072 Jy ! Component: 1400 - total flux cleaned = 0.000547063 Jy ! Component: 1450 - total flux cleaned = 0.000516062 Jy ! Component: 1500 - total flux cleaned = 0.000366594 Jy ! Component: 1550 - total flux cleaned = 0.000455338 Jy ! Component: 1600 - total flux cleaned = 0.000281007 Jy ! Component: 1650 - total flux cleaned = 0.000223688 Jy ! Component: 1700 - total flux cleaned = 0.00022398 Jy ! Component: 1750 - total flux cleaned = 0.000167932 Jy ! Component: 1800 - total flux cleaned = 8.47509e-05 Jy ! Component: 1850 - total flux cleaned = -5.05522e-05 Jy ! Component: 1900 - total flux cleaned = -7.69745e-05 Jy ! Component: 1950 - total flux cleaned = -0.000129851 Jy ! Component: 2000 - total flux cleaned = -0.00026013 Jy ! Component: 2050 - total flux cleaned = -0.000311575 Jy ! Component: 2100 - total flux cleaned = -0.000413106 Jy ! Component: 2150 - total flux cleaned = -0.000488659 Jy ! Component: 2200 - total flux cleaned = -0.000563156 Jy ! Component: 2250 - total flux cleaned = -0.000612055 Jy ! Component: 2300 - total flux cleaned = -0.000636424 Jy ! Component: 2350 - total flux cleaned = -0.000708329 Jy ! Component: 2400 - total flux cleaned = -0.000684085 Jy ! Component: 2450 - total flux cleaned = -0.000636849 Jy ! Component: 2500 - total flux cleaned = -0.00054352 Jy ! Component: 2550 - total flux cleaned = -0.000612943 Jy ! Component: 2600 - total flux cleaned = -0.000567089 Jy ! Component: 2650 - total flux cleaned = -0.000544003 Jy ! Component: 2700 - total flux cleaned = -0.000566223 Jy ! Component: 2750 - total flux cleaned = -0.000365639 Jy ! Component: 2800 - total flux cleaned = -0.000476458 Jy ! Component: 2850 - total flux cleaned = -0.000432602 Jy ! Component: 2900 - total flux cleaned = -0.000432541 Jy ! Component: 2950 - total flux cleaned = -0.000496872 Jy ! Component: 3000 - total flux cleaned = -0.000496516 Jy ! Component: 3050 - total flux cleaned = -0.000412084 Jy ! Component: 3100 - total flux cleaned = -0.000454334 Jy ! Component: 3150 - total flux cleaned = -0.000496088 Jy ! Component: 3200 - total flux cleaned = -0.000516923 Jy ! Component: 3250 - total flux cleaned = -0.000496313 Jy ! Component: 3300 - total flux cleaned = -0.000557776 Jy ! Component: 3350 - total flux cleaned = -0.000598188 Jy ! Component: 3400 - total flux cleaned = -0.000598209 Jy ! Component: 3450 - total flux cleaned = -0.000518473 Jy ! Component: 3500 - total flux cleaned = -0.00055814 Jy ! Component: 3550 - total flux cleaned = -0.000577609 Jy ! Component: 3600 - total flux cleaned = -0.000538235 Jy ! Component: 3650 - total flux cleaned = -0.000577357 Jy ! Component: 3700 - total flux cleaned = -0.000577335 Jy ! Component: 3750 - total flux cleaned = -0.000558156 Jy ! Component: 3800 - total flux cleaned = -0.000558241 Jy ! Component: 3850 - total flux cleaned = -0.000558151 Jy ! Component: 3900 - total flux cleaned = -0.000577206 Jy ! Component: 3950 - total flux cleaned = -0.000614896 Jy ! Component: 4000 - total flux cleaned = -0.000652221 Jy ! Component: 4050 - total flux cleaned = -0.000615063 Jy ! Total flux subtracted in 4096 components = -0.000670506 Jy ! Clean residual min=-0.001356 max=0.001083 Jy/beam ! Clean residual mean=0.000009 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.185418 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 307 components and 0.185418 Jy ![Exited script file: muppet] wmap "J1544-2312_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.605 x 6.814 at -5.693 degrees (North through East) ! Clean map min=-0.0026021 max=0.1559 Jy/beam ! Writing clean map to FITS file: J1544-2312_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.155898 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000307656 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.592032 0.592032 1.18406 2.36813 4.73626 9.47252 18.945 37.8901 75.7801 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.155 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.605 x 6.814 at -5.693 degrees (North through East) ! Clean map min=-0.0026021 max=0.1559 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1544-2312_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:37 2019