! Started logfile: J1544-2312_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:16:43 2019 obs J1544-2312_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1544-2312_S_2017_01_16_pus_uva.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774775 visibilities/baseline/integration-bin. ! Found source: J1544-2312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 5160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1544-2312_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.853687Jy sigma=0.005611 ! Fit after self-cal, rms=0.842611Jy sigma=0.005549 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=13.96 mas, bpa=17.85 degrees ! Estimated noise=1992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129341 Jy ! Component: 100 - total flux cleaned = 0.158294 Jy ! Total flux subtracted in 100 components = 0.158294 Jy ! Clean residual min=-0.009274 max=0.011264 Jy/beam ! Clean residual mean=-0.000037 rms=0.002717 Jy/beam ! Combined flux in latest and established models = 0.158295 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.158295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181318Jy sigma=0.000686 ! Fit after self-cal, rms=0.181300Jy sigma=0.000686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=15.25 mas, bpa=17.34 degrees ! Estimated noise=1592.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148975 Jy ! Component: 100 - total flux cleaned = 0.0238291 Jy ! Component: 150 - total flux cleaned = 0.0296305 Jy ! Component: 200 - total flux cleaned = 0.0335946 Jy ! Total flux subtracted in 200 components = 0.0335946 Jy ! Clean residual min=-0.005853 max=0.005942 Jy/beam ! Clean residual mean=-0.000031 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.191889 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 35 components and 0.191889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178946Jy sigma=0.000673 ! Fit after self-cal, rms=0.179064Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.95 HN 1.06 KP 1.00 ! LA 1.01 MK 1.00* NL 0.87 OV 0.97 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.98 KP 0.98 ! LA 1.02 MK 1.00* NL 1.08 OV 1.01 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 1.02 KP 0.99 ! LA 0.97 MK 1.00* NL 1.02 OV 0.97 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.09 KP 1.00 ! LA 0.47 MK 1.00* NL 1.00* OV 0.91 ! PT 1.02 SC 1.20 ! ! ! Fit before self-cal, rms=0.179064Jy sigma=0.000673 ! Fit after self-cal, rms=0.136132Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=15.35 mas, bpa=17.28 degrees ! Estimated noise=1601.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037505 Jy ! Component: 100 - total flux cleaned = -0.000496803 Jy ! Component: 150 - total flux cleaned = -0.000598598 Jy ! Component: 200 - total flux cleaned = -0.000685806 Jy ! Total flux subtracted in 200 components = -0.000685806 Jy ! Clean residual min=-0.004439 max=0.004180 Jy/beam ! Clean residual mean=-0.000015 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.191203 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.191203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136075Jy sigma=0.000662 ! Fit after self-cal, rms=0.135734Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135734Jy sigma=0.000662 ! Fit after self-cal, rms=0.135650Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=15.34 mas, bpa=17.28 degrees ! Estimated noise=1604.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491543 Jy ! Component: 100 - total flux cleaned = -0.000543608 Jy ! Component: 150 - total flux cleaned = -0.000586581 Jy ! Component: 200 - total flux cleaned = -0.000513004 Jy ! Total flux subtracted in 200 components = -0.000513004 Jy ! Clean residual min=-0.004080 max=0.004173 Jy/beam ! Clean residual mean=-0.000013 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.19069 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.19069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135616Jy sigma=0.000661 ! Fit after self-cal, rms=0.135588Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.35088e-05 Jy ! Component: 100 - total flux cleaned = 0.000142153 Jy ! Component: 150 - total flux cleaned = 0.000207918 Jy ! Component: 200 - total flux cleaned = 0.000240335 Jy ! Total flux subtracted in 200 components = 0.000240335 Jy ! Clean residual min=-0.003989 max=0.004134 Jy/beam ! Clean residual mean=-0.000013 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.190931 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.190931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135571Jy sigma=0.000661 ! Fit after self-cal, rms=0.135569Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135569Jy sigma=0.000661 ! Fit after self-cal, rms=0.136001Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=15.34 mas, bpa=17.28 degrees ! Estimated noise=1607.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356292 Jy ! Component: 100 - total flux cleaned = -0.000354774 Jy ! Component: 150 - total flux cleaned = -0.000290619 Jy ! Component: 200 - total flux cleaned = -0.000258943 Jy ! Total flux subtracted in 200 components = -0.000258943 Jy ! Clean residual min=-0.003845 max=0.004127 Jy/beam ! Clean residual mean=-0.000011 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.190672 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.190672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135977Jy sigma=0.000661 ! Fit after self-cal, rms=0.135969Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.17627e-05 Jy ! Component: 100 - total flux cleaned = 0.000120133 Jy ! Component: 150 - total flux cleaned = 0.000148817 Jy ! Component: 200 - total flux cleaned = 0.00017543 Jy ! Total flux subtracted in 200 components = 0.00017543 Jy ! Clean residual min=-0.003778 max=0.004112 Jy/beam ! Clean residual mean=-0.000011 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.190847 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.190847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135955Jy sigma=0.000661 ! Fit after self-cal, rms=0.135955Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135955Jy sigma=0.000661 ! Fit after self-cal, rms=0.136396Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.908 mas, bmaj=20.91 mas, bpa=7.801 degrees ! Estimated noise=1842.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.54514e-05 Jy ! Component: 100 - total flux cleaned = 0.000105218 Jy ! Component: 150 - total flux cleaned = 0.000104972 Jy ! Component: 200 - total flux cleaned = 0.000130555 Jy ! Total flux subtracted in 200 components = 0.000130555 Jy ! Clean residual min=-0.004624 max=0.005137 Jy/beam ! Clean residual mean=-0.000014 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.190978 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.190978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136386Jy sigma=0.000661 ! Fit after self-cal, rms=0.136389Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.68138e-05 Jy ! Component: 100 - total flux cleaned = 5.67444e-05 Jy ! Component: 150 - total flux cleaned = 7.79204e-05 Jy ! Component: 200 - total flux cleaned = 9.83607e-05 Jy ! Total flux subtracted in 200 components = 9.83607e-05 Jy ! Clean residual min=-0.004623 max=0.005113 Jy/beam ! Clean residual mean=-0.000014 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.191076 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.191076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136386Jy sigma=0.000661 ! Fit after self-cal, rms=0.136390Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=15.33 mas, bpa=17.29 degrees ! Estimated noise=1610.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 15.33 at 17.29 degrees (North through East) ! Clean map min=-0.0035682 max=0.16283 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=14.03 mas, bpa=17.8 degrees ! Estimated noise=2016.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130791 Jy ! Component: 100 - total flux cleaned = 0.159469 Jy ! Component: 150 - total flux cleaned = 0.169469 Jy ! Component: 200 - total flux cleaned = 0.175748 Jy ! Total flux subtracted in 200 components = 0.175748 Jy ! Clean residual min=-0.005485 max=0.005217 Jy/beam ! Clean residual mean=-0.000014 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.175748 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.175748 Jy ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=15.33 mas, bpa=17.29 degrees ! Estimated noise=1610.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546014 Jy ! Component: 100 - total flux cleaned = 0.00872438 Jy ! Component: 150 - total flux cleaned = 0.0109093 Jy ! Component: 200 - total flux cleaned = 0.0115692 Jy ! Total flux subtracted in 200 components = 0.0115692 Jy ! Clean residual min=-0.003831 max=0.004592 Jy/beam ! Clean residual mean=-0.000014 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.187317 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 35 components and 0.187317 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.908 mas, bmaj=20.91 mas, bpa=7.801 degrees ! Estimated noise=1842.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131609 Jy ! Component: 100 - total flux cleaned = 0.0016769 Jy ! Component: 150 - total flux cleaned = 0.00194447 Jy ! Component: 200 - total flux cleaned = 0.00223767 Jy ! Total flux subtracted in 200 components = 0.00223767 Jy ! Clean residual min=-0.004560 max=0.005410 Jy/beam ! Clean residual mean=-0.000019 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.189555 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220732 Jy ! Component: 100 - total flux cleaned = 0.000343471 Jy ! Component: 150 - total flux cleaned = 0.000420301 Jy ! Component: 200 - total flux cleaned = 0.000491825 Jy ! Total flux subtracted in 200 components = 0.000491825 Jy ! Clean residual min=-0.004533 max=0.005229 Jy/beam ! Clean residual mean=-0.000017 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.190046 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.190046 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=15.33 mas, bpa=17.29 degrees ! Estimated noise=1610.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.5233e-05 Jy ! Component: 100 - total flux cleaned = -8.43553e-05 Jy ! Component: 150 - total flux cleaned = -3.96903e-05 Jy ! Component: 200 - total flux cleaned = -3.86235e-05 Jy ! Total flux subtracted in 200 components = -3.86235e-05 Jy ! Clean residual min=-0.003389 max=0.004260 Jy/beam ! Clean residual mean=-0.000010 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.190008 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.190008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136403Jy sigma=0.000661 ! Fit after self-cal, rms=0.136380Jy sigma=0.000661 wmodel J1544-2312_S_2017_01_16_pus_map.mod ! Writing 62 model components to file: J1544-2312_S_2017_01_16_pus_map.mod wobs J1544-2312_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1544-2312_S_2017_01_16_pus_uvs.fits wwins J1544-2312_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1544-2312_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188101 Jy ! Component: 100 - total flux cleaned = 0.00305419 Jy ! Component: 150 - total flux cleaned = 0.003766 Jy ! Component: 200 - total flux cleaned = 0.0040965 Jy ! Component: 250 - total flux cleaned = 0.00446001 Jy ! Component: 300 - total flux cleaned = 0.00475815 Jy ! Component: 350 - total flux cleaned = 0.00499577 Jy ! Component: 400 - total flux cleaned = 0.00517503 Jy ! Component: 450 - total flux cleaned = 0.0053044 Jy ! Component: 500 - total flux cleaned = 0.00559826 Jy ! Component: 550 - total flux cleaned = 0.00600305 Jy ! Component: 600 - total flux cleaned = 0.00643346 Jy ! Component: 650 - total flux cleaned = 0.00677561 Jy ! Component: 700 - total flux cleaned = 0.00710878 Jy ! Component: 750 - total flux cleaned = 0.00732517 Jy ! Component: 800 - total flux cleaned = 0.00746537 Jy ! Component: 850 - total flux cleaned = 0.00760247 Jy ! Component: 900 - total flux cleaned = 0.00773636 Jy ! Component: 950 - total flux cleaned = 0.00780153 Jy ! Component: 1000 - total flux cleaned = 0.00789719 Jy ! Component: 1050 - total flux cleaned = 0.00795937 Jy ! Component: 1100 - total flux cleaned = 0.00795925 Jy ! Component: 1150 - total flux cleaned = 0.00798894 Jy ! Component: 1200 - total flux cleaned = 0.00798965 Jy ! Component: 1250 - total flux cleaned = 0.00807794 Jy ! Component: 1300 - total flux cleaned = 0.00822084 Jy ! Component: 1350 - total flux cleaned = 0.00827688 Jy ! Component: 1400 - total flux cleaned = 0.00838752 Jy ! Component: 1450 - total flux cleaned = 0.00844242 Jy ! Component: 1500 - total flux cleaned = 0.00854992 Jy ! Component: 1550 - total flux cleaned = 0.00865601 Jy ! Component: 1600 - total flux cleaned = 0.00873421 Jy ! Component: 1650 - total flux cleaned = 0.00883662 Jy ! Component: 1700 - total flux cleaned = 0.00883628 Jy ! Component: 1750 - total flux cleaned = 0.00901142 Jy ! Component: 1800 - total flux cleaned = 0.00903582 Jy ! Component: 1850 - total flux cleaned = 0.00915761 Jy ! Component: 1900 - total flux cleaned = 0.00925352 Jy ! Component: 1950 - total flux cleaned = 0.00922962 Jy ! Component: 2000 - total flux cleaned = 0.00934667 Jy ! Component: 2050 - total flux cleaned = 0.00943937 Jy ! Component: 2100 - total flux cleaned = 0.00946197 Jy ! Component: 2150 - total flux cleaned = 0.00959735 Jy ! Component: 2200 - total flux cleaned = 0.00964194 Jy ! Component: 2250 - total flux cleaned = 0.00973022 Jy ! Component: 2300 - total flux cleaned = 0.00977384 Jy ! Component: 2350 - total flux cleaned = 0.00975191 Jy ! Component: 2400 - total flux cleaned = 0.009709 Jy ! Component: 2450 - total flux cleaned = 0.00970891 Jy ! Component: 2500 - total flux cleaned = 0.00970911 Jy ! Component: 2550 - total flux cleaned = 0.00979246 Jy ! Component: 2600 - total flux cleaned = 0.00985409 Jy ! Component: 2650 - total flux cleaned = 0.00989509 Jy ! Component: 2700 - total flux cleaned = 0.00991536 Jy ! Component: 2750 - total flux cleaned = 0.0100359 Jy ! Component: 2800 - total flux cleaned = 0.0101548 Jy ! Component: 2850 - total flux cleaned = 0.0101741 Jy ! Component: 2900 - total flux cleaned = 0.0102131 Jy ! Component: 2950 - total flux cleaned = 0.0102907 Jy ! Component: 3000 - total flux cleaned = 0.0103674 Jy ! Component: 3050 - total flux cleaned = 0.0104624 Jy ! Component: 3100 - total flux cleaned = 0.0104812 Jy ! Component: 3150 - total flux cleaned = 0.0105561 Jy ! Component: 3200 - total flux cleaned = 0.0106119 Jy ! Component: 3250 - total flux cleaned = 0.0106672 Jy ! Component: 3300 - total flux cleaned = 0.0107038 Jy ! Component: 3350 - total flux cleaned = 0.0108127 Jy ! Component: 3400 - total flux cleaned = 0.0107945 Jy ! Component: 3450 - total flux cleaned = 0.0109018 Jy ! Component: 3500 - total flux cleaned = 0.0109727 Jy ! Component: 3550 - total flux cleaned = 0.0110434 Jy ! Component: 3600 - total flux cleaned = 0.0111484 Jy ! Component: 3650 - total flux cleaned = 0.0112528 Jy ! Component: 3700 - total flux cleaned = 0.0113048 Jy ! Component: 3750 - total flux cleaned = 0.0113735 Jy ! Component: 3800 - total flux cleaned = 0.0114762 Jy ! Component: 3850 - total flux cleaned = 0.011578 Jy ! Component: 3900 - total flux cleaned = 0.0116624 Jy ! Component: 3950 - total flux cleaned = 0.0117462 Jy ! Component: 4000 - total flux cleaned = 0.0117796 Jy ! Component: 4050 - total flux cleaned = 0.0119454 Jy ! Total flux subtracted in 4096 components = 0.0119123 Jy ! Clean residual min=-0.000927 max=0.000972 Jy/beam ! Clean residual mean=0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.20192 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 346 components and 0.20192 Jy ![Exited script file: muppet] wmap "J1544-2312_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 15.33 at 17.29 degrees (North through East) ! Clean map min=-0.00241 max=0.16767 Jy/beam ! Writing clean map to FITS file: J1544-2312_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.167668 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283852 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.507882 0.507882 1.01576 2.03153 4.06305 8.12611 16.2522 32.5044 65.0089 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 15.33 at 17.29 degrees (North through East) ! Clean map min=-0.00241 max=0.16767 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1544-2312_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:16:48 2019