! Started logfile: J1542-0927_S_2017_09_26_pus_uvs.log on Sat May 11 13:02:47 2019 obs J1542-0927_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1542-0927_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.782502 visibilities/baseline/integration-bin. ! Found source: J1542-0927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 33128 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1542-0927_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 603 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 529 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1552 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988182Jy sigma=0.007853 ! Fit after self-cal, rms=0.946851Jy sigma=0.007542 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=17.11 mas, bpa=-15.63 degrees ! Estimated noise=1035.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397453 Jy ! Component: 100 - total flux cleaned = 0.0509399 Jy ! Total flux subtracted in 100 components = 0.0509399 Jy ! Clean residual min=-0.007611 max=0.008916 Jy/beam ! Clean residual mean=0.000006 rms=0.002633 Jy/beam ! Combined flux in latest and established models = 0.0509399 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0509399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097572Jy sigma=0.000752 ! Fit after self-cal, rms=0.096629Jy sigma=0.000744 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=20.76 mas, bpa=-15.58 degrees ! Estimated noise=593.917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156461 Jy ! Component: 100 - total flux cleaned = 0.0261546 Jy ! Component: 150 - total flux cleaned = 0.0338822 Jy ! Component: 200 - total flux cleaned = 0.0396623 Jy ! Total flux subtracted in 200 components = 0.0396623 Jy ! Clean residual min=-0.011910 max=0.011522 Jy/beam ! Clean residual mean=0.000047 rms=0.004368 Jy/beam ! Combined flux in latest and established models = 0.0906023 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 112 components and 0.0906023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093573Jy sigma=0.000718 ! Fit after self-cal, rms=0.093212Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.11 KP 1.20 ! LA 0.73 MK 1.15 NL 1.42 OV 1.62 ! PT 0.70 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.13 KP 1.19 ! LA 0.69 MK 1.12 NL 1.55 OV 1.58 ! PT 0.70 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.21 HN 1.16 KP 1.22 ! LA 0.71 MK 1.15 NL 1.32 OV 1.41 ! PT 0.69 ! ! ! Correcting IF 4. ! A total of 396 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.21 HN 0.85 KP 1.00* ! LA 0.74 MK 0.87 NL 1.00* OV 1.10 ! PT 0.75 ! ! ! Fit before self-cal, rms=0.093212Jy sigma=0.000714 ! Fit after self-cal, rms=0.120582Jy sigma=0.000694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=21.68 mas, bpa=-15.65 degrees ! Estimated noise=631.515 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151848 Jy ! Component: 100 - total flux cleaned = 0.00144673 Jy ! Component: 150 - total flux cleaned = 0.0013228 Jy ! Component: 200 - total flux cleaned = 0.00126851 Jy ! Total flux subtracted in 200 components = 0.00126851 Jy ! Clean residual min=-0.009476 max=0.012558 Jy/beam ! Clean residual mean=-0.000070 rms=0.003112 Jy/beam ! Combined flux in latest and established models = 0.0918708 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 118 components and 0.0918708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120391Jy sigma=0.000694 ! Fit after self-cal, rms=0.123004Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123004Jy sigma=0.000686 ! Fit after self-cal, rms=0.141280Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=22.44 mas, bpa=-15.78 degrees ! Estimated noise=666.016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210366 Jy ! Component: 100 - total flux cleaned = -0.000377899 Jy ! Component: 150 - total flux cleaned = -0.000517315 Jy ! Component: 200 - total flux cleaned = -0.000518697 Jy ! Total flux subtracted in 200 components = -0.000518697 Jy ! Clean residual min=-0.008778 max=0.009837 Jy/beam ! Clean residual mean=-0.000041 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.0913521 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 120 components and 0.0913521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141111Jy sigma=0.000683 ! Fit after self-cal, rms=0.141825Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.66447e-05 Jy ! Component: 100 - total flux cleaned = -0.000218475 Jy ! Component: 150 - total flux cleaned = -0.000259587 Jy ! Component: 200 - total flux cleaned = -0.00026025 Jy ! Total flux subtracted in 200 components = -0.00026025 Jy ! Clean residual min=-0.008903 max=0.009298 Jy/beam ! Clean residual mean=-0.000036 rms=0.002746 Jy/beam ! Combined flux in latest and established models = 0.0910919 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 128 components and 0.0910919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141786Jy sigma=0.000682 ! Fit after self-cal, rms=0.141726Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141726Jy sigma=0.000682 ! Fit after self-cal, rms=0.149901Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=23.26 mas, bpa=-15.88 degrees ! Estimated noise=672.255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000602881 Jy ! Component: 100 - total flux cleaned = -0.000676342 Jy ! Component: 150 - total flux cleaned = -0.000741749 Jy ! Component: 200 - total flux cleaned = -0.000742929 Jy ! Total flux subtracted in 200 components = -0.000742929 Jy ! Clean residual min=-0.008837 max=0.009313 Jy/beam ! Clean residual mean=-0.000038 rms=0.002728 Jy/beam ! Combined flux in latest and established models = 0.0903489 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 129 components and 0.0903489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149768Jy sigma=0.000681 ! Fit after self-cal, rms=0.149925Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.57092e-05 Jy ! Component: 100 - total flux cleaned = -0.000149337 Jy ! Component: 150 - total flux cleaned = -0.000149538 Jy ! Component: 200 - total flux cleaned = -0.00019193 Jy ! Total flux subtracted in 200 components = -0.00019193 Jy ! Clean residual min=-0.008934 max=0.009255 Jy/beam ! Clean residual mean=-0.000034 rms=0.002747 Jy/beam ! Combined flux in latest and established models = 0.090157 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 129 components and 0.090157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149866Jy sigma=0.000681 ! Fit after self-cal, rms=0.149774Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149774Jy sigma=0.000681 ! Fit after self-cal, rms=0.156497Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.179 mas, bmaj=24.85 mas, bpa=-13.24 degrees ! Estimated noise=754.152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391434 Jy ! Component: 100 - total flux cleaned = -0.000542631 Jy ! Component: 150 - total flux cleaned = -0.000670017 Jy ! Component: 200 - total flux cleaned = -0.000777165 Jy ! Total flux subtracted in 200 components = -0.000777165 Jy ! Clean residual min=-0.013344 max=0.012584 Jy/beam ! Clean residual mean=-0.000060 rms=0.004322 Jy/beam ! Combined flux in latest and established models = 0.0893798 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 130 components and 0.0893798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156386Jy sigma=0.000680 ! Fit after self-cal, rms=0.156463Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135304 Jy ! Component: 100 - total flux cleaned = -0.000131227 Jy ! Component: 150 - total flux cleaned = -0.00016615 Jy ! Component: 200 - total flux cleaned = -0.000197816 Jy ! Total flux subtracted in 200 components = -0.000197816 Jy ! Clean residual min=-0.013552 max=0.012653 Jy/beam ! Clean residual mean=-0.000057 rms=0.004366 Jy/beam ! Combined flux in latest and established models = 0.089182 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 139 components and 0.089182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156416Jy sigma=0.000680 ! Fit after self-cal, rms=0.156340Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=24.12 mas, bpa=-15.96 degrees ! Estimated noise=674.349 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.701 x 24.12 at -15.96 degrees (North through East) ! Clean map min=-0.0089624 max=0.06006 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=19.31 mas, bpa=-15.76 degrees ! Estimated noise=1264.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443829 Jy ! Component: 100 - total flux cleaned = 0.0593656 Jy ! Component: 150 - total flux cleaned = 0.0693548 Jy ! Component: 200 - total flux cleaned = 0.0764044 Jy ! Total flux subtracted in 200 components = 0.0764044 Jy ! Clean residual min=-0.007693 max=0.007829 Jy/beam ! Clean residual mean=-0.000007 rms=0.002224 Jy/beam ! Combined flux in latest and established models = 0.0764044 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0764044 Jy ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=24.12 mas, bpa=-15.96 degrees ! Estimated noise=674.349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726132 Jy ! Component: 100 - total flux cleaned = 0.0091242 Jy ! Component: 150 - total flux cleaned = 0.0101246 Jy ! Component: 200 - total flux cleaned = 0.0104834 Jy ! Total flux subtracted in 200 components = 0.0104834 Jy ! Clean residual min=-0.009497 max=0.009678 Jy/beam ! Clean residual mean=-0.000032 rms=0.002837 Jy/beam ! Combined flux in latest and established models = 0.0868879 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 81 components and 0.0868878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.179 mas, bmaj=24.85 mas, bpa=-13.24 degrees ! Estimated noise=754.152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239374 Jy ! Component: 100 - total flux cleaned = 0.00249327 Jy ! Component: 150 - total flux cleaned = 0.00249125 Jy ! Component: 200 - total flux cleaned = 0.00242938 Jy ! Total flux subtracted in 200 components = 0.00242938 Jy ! Clean residual min=-0.013689 max=0.012913 Jy/beam ! Clean residual mean=-0.000059 rms=0.004395 Jy/beam ! Combined flux in latest and established models = 0.0893172 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.0141e-05 Jy ! Component: 100 - total flux cleaned = -0.000113781 Jy ! Component: 150 - total flux cleaned = -0.000113282 Jy ! Component: 200 - total flux cleaned = -0.000157967 Jy ! Total flux subtracted in 200 components = -0.000157967 Jy ! Clean residual min=-0.013603 max=0.012861 Jy/beam ! Clean residual mean=-0.000058 rms=0.004396 Jy/beam ! Combined flux in latest and established models = 0.0891593 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 114 components and 0.0891592 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=24.12 mas, bpa=-15.96 degrees ! Estimated noise=674.349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393536 Jy ! Component: 100 - total flux cleaned = -0.000460435 Jy ! Component: 150 - total flux cleaned = -0.000512241 Jy ! Component: 200 - total flux cleaned = -0.000608176 Jy ! Total flux subtracted in 200 components = -0.000608176 Jy ! Clean residual min=-0.008941 max=0.009514 Jy/beam ! Clean residual mean=-0.000033 rms=0.002796 Jy/beam ! Combined flux in latest and established models = 0.0885511 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 128 components and 0.0885511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156415Jy sigma=0.000681 ! Fit after self-cal, rms=0.156480Jy sigma=0.000681 wmodel J1542-0927_S_2017_09_26_pus_map.mod ! Writing 128 model components to file: J1542-0927_S_2017_09_26_pus_map.mod wobs J1542-0927_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1542-0927_S_2017_09_26_pus_uvs.fits wwins J1542-0927_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1542-0927_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013764 Jy ! Component: 100 - total flux cleaned = 0.00195102 Jy ! Component: 150 - total flux cleaned = 0.00351649 Jy ! Component: 200 - total flux cleaned = 0.00535533 Jy ! Component: 250 - total flux cleaned = 0.00709802 Jy ! Component: 300 - total flux cleaned = 0.00908444 Jy ! Component: 350 - total flux cleaned = 0.0107719 Jy ! Component: 400 - total flux cleaned = 0.0122871 Jy ! Component: 450 - total flux cleaned = 0.0136516 Jy ! Component: 500 - total flux cleaned = 0.0150623 Jy ! Component: 550 - total flux cleaned = 0.0162443 Jy ! Component: 600 - total flux cleaned = 0.017834 Jy ! Component: 650 - total flux cleaned = 0.0192906 Jy ! Component: 700 - total flux cleaned = 0.0205431 Jy ! Component: 750 - total flux cleaned = 0.0216834 Jy ! Component: 800 - total flux cleaned = 0.0229518 Jy ! Component: 850 - total flux cleaned = 0.0241117 Jy ! Component: 900 - total flux cleaned = 0.025546 Jy ! Component: 950 - total flux cleaned = 0.0265781 Jy ! Component: 1000 - total flux cleaned = 0.0277306 Jy ! Component: 1050 - total flux cleaned = 0.0287876 Jy ! Component: 1100 - total flux cleaned = 0.0300279 Jy ! Component: 1150 - total flux cleaned = 0.0311756 Jy ! Component: 1200 - total flux cleaned = 0.0321684 Jy ! Component: 1250 - total flux cleaned = 0.0334653 Jy ! Component: 1300 - total flux cleaned = 0.0346085 Jy ! Component: 1350 - total flux cleaned = 0.0356669 Jy ! Component: 1400 - total flux cleaned = 0.0368274 Jy ! Component: 1450 - total flux cleaned = 0.037906 Jy ! Component: 1500 - total flux cleaned = 0.0391413 Jy ! Component: 1550 - total flux cleaned = 0.0401808 Jy ! Component: 1600 - total flux cleaned = 0.0413724 Jy ! Component: 1650 - total flux cleaned = 0.0425422 Jy ! Component: 1700 - total flux cleaned = 0.043693 Jy ! Component: 1750 - total flux cleaned = 0.044824 Jy ! Component: 1800 - total flux cleaned = 0.0458829 Jy ! Component: 1850 - total flux cleaned = 0.0470279 Jy ! Component: 1900 - total flux cleaned = 0.0480005 Jy ! Component: 1950 - total flux cleaned = 0.0491595 Jy ! Component: 2000 - total flux cleaned = 0.0502499 Jy ! Component: 2050 - total flux cleaned = 0.0511779 Jy ! Component: 2100 - total flux cleaned = 0.0521393 Jy ! Component: 2150 - total flux cleaned = 0.0531337 Jy ! Component: 2200 - total flux cleaned = 0.0539264 Jy ! Component: 2250 - total flux cleaned = 0.0547082 Jy ! Component: 2300 - total flux cleaned = 0.055615 Jy ! Component: 2350 - total flux cleaned = 0.0563307 Jy ! Component: 2400 - total flux cleaned = 0.0571694 Jy ! Component: 2450 - total flux cleaned = 0.0579528 Jy ! Component: 2500 - total flux cleaned = 0.058683 Jy ! Component: 2550 - total flux cleaned = 0.0594041 Jy ! Component: 2600 - total flux cleaned = 0.0601582 Jy ! Component: 2650 - total flux cleaned = 0.0606959 Jy ! Component: 2700 - total flux cleaned = 0.0613917 Jy ! Component: 2750 - total flux cleaned = 0.0619981 Jy ! Component: 2800 - total flux cleaned = 0.0627977 Jy ! Component: 2850 - total flux cleaned = 0.0633906 Jy ! Component: 2900 - total flux cleaned = 0.0640161 Jy ! Component: 2950 - total flux cleaned = 0.0647126 Jy ! Component: 3000 - total flux cleaned = 0.0652101 Jy ! Component: 3050 - total flux cleaned = 0.065892 Jy ! Component: 3100 - total flux cleaned = 0.0664921 Jy ! Component: 3150 - total flux cleaned = 0.0670862 Jy ! Component: 3200 - total flux cleaned = 0.0676379 Jy ! Component: 3250 - total flux cleaned = 0.0682203 Jy ! Component: 3300 - total flux cleaned = 0.0687249 Jy ! Component: 3350 - total flux cleaned = 0.0692603 Jy ! Component: 3400 - total flux cleaned = 0.0696851 Jy ! Component: 3450 - total flux cleaned = 0.0701763 Jy ! Component: 3500 - total flux cleaned = 0.0706628 Jy ! Component: 3550 - total flux cleaned = 0.0712139 Jy ! Component: 3600 - total flux cleaned = 0.0716578 Jy ! Component: 3650 - total flux cleaned = 0.0721656 Jy ! Component: 3700 - total flux cleaned = 0.0726355 Jy ! Component: 3750 - total flux cleaned = 0.0730352 Jy ! Component: 3800 - total flux cleaned = 0.0735308 Jy ! Component: 3850 - total flux cleaned = 0.0739567 Jy ! Component: 3900 - total flux cleaned = 0.0744439 Jy ! Component: 3950 - total flux cleaned = 0.0747988 Jy ! Component: 4000 - total flux cleaned = 0.075151 Jy ! Component: 4050 - total flux cleaned = 0.075532 Jy ! Total flux subtracted in 4096 components = 0.0757844 Jy ! Clean residual min=-0.001693 max=0.001686 Jy/beam ! Clean residual mean=-0.000031 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.164335 Jy keep ! Adding 761 model components to the UV plane model. ! The established model now contains 889 components and 0.164335 Jy ![Exited script file: muppet] wmap "J1542-0927_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.701 x 24.12 at -15.96 degrees (North through East) ! Clean map min=-0.004231 max=0.060407 Jy/beam ! Writing clean map to FITS file: J1542-0927_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0604073 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000878181 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.3613 4.3613 8.72259 17.4452 34.8904 69.7807 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.701 x 24.12 at -15.96 degrees (North through East) ! Clean map min=-0.004231 max=0.060407 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1542-0927_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:02:54 2019