! Started logfile: J1542-0927_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:44:12 2019 obs J1542-0927_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1542-0927_S_2017_03_27_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88787 visibilities/baseline/integration-bin. ! Found source: J1542-0927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 34840 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1542-0927_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994053Jy sigma=0.007548 ! Fit after self-cal, rms=0.948075Jy sigma=0.007220 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=6.8 mas, bpa=-3.388 degrees ! Estimated noise=905.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389208 Jy ! Component: 100 - total flux cleaned = 0.0493414 Jy ! Total flux subtracted in 100 components = 0.0493414 Jy ! Clean residual min=-0.005835 max=0.007823 Jy/beam ! Clean residual mean=0.000019 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.0493414 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0493414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116863Jy sigma=0.000835 ! Fit after self-cal, rms=0.115910Jy sigma=0.000828 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.177 mas, bpa=-1.964 degrees ! Estimated noise=583.373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173506 Jy ! Component: 100 - total flux cleaned = 0.0274961 Jy ! Component: 150 - total flux cleaned = 0.0335736 Jy ! Component: 200 - total flux cleaned = 0.037217 Jy ! Total flux subtracted in 200 components = 0.037217 Jy ! Clean residual min=-0.010352 max=0.014834 Jy/beam ! Clean residual mean=0.000081 rms=0.004425 Jy/beam ! Combined flux in latest and established models = 0.0865584 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 43 components and 0.0865584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113622Jy sigma=0.000803 ! Fit after self-cal, rms=0.113388Jy sigma=0.000801 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.61 FD 0.97 HN 1.66 KP 1.41 ! LA 0.66 MK 1.27 NL 2.12 OV 2.16 ! PT 0.57 SC 1.27 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.83 FD 0.77 HN 1.77 KP 1.66 ! LA 0.62 MK 1.37 NL 2.17 OV 2.34 ! PT 0.57 SC 1.61 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.47 FD 0.91 HN 1.60 KP 1.36 ! LA 0.66 MK 1.31 NL 1.81 OV 2.04 ! PT 0.58 SC 1.49 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.74 HN 0.96 KP 1.00* ! LA 0.47 MK 0.92 NL 1.00* OV 1.07 ! PT 0.78 SC 0.83 ! ! ! Fit before self-cal, rms=0.113388Jy sigma=0.000801 ! Fit after self-cal, rms=0.210699Jy sigma=0.000750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=9.203 mas, bpa=-3.316 degrees ! Estimated noise=690.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476922 Jy ! Component: 100 - total flux cleaned = 0.00429187 Jy ! Component: 150 - total flux cleaned = 0.0039014 Jy ! Component: 200 - total flux cleaned = 0.0035836 Jy ! Total flux subtracted in 200 components = 0.0035836 Jy ! Clean residual min=-0.011117 max=0.011639 Jy/beam ! Clean residual mean=0.000011 rms=0.003363 Jy/beam ! Combined flux in latest and established models = 0.090142 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.090142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209828Jy sigma=0.000751 ! Fit after self-cal, rms=0.215916Jy sigma=0.000738 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215916Jy sigma=0.000738 ! Fit after self-cal, rms=0.357557Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=9.599 mas, bpa=-3.641 degrees ! Estimated noise=829.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688717 Jy ! Component: 100 - total flux cleaned = 0.00700967 Jy ! Component: 150 - total flux cleaned = 0.00688363 Jy ! Component: 200 - total flux cleaned = 0.00666683 Jy ! Total flux subtracted in 200 components = 0.00666683 Jy ! Clean residual min=-0.008320 max=0.008033 Jy/beam ! Clean residual mean=-0.000016 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.0968089 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.0968089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356831Jy sigma=0.000710 ! Fit after self-cal, rms=0.359712Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206335 Jy ! Component: 100 - total flux cleaned = -0.0024141 Jy ! Component: 150 - total flux cleaned = -0.00255687 Jy ! Component: 200 - total flux cleaned = -0.00265257 Jy ! Total flux subtracted in 200 components = -0.00265257 Jy ! Clean residual min=-0.008582 max=0.007032 Jy/beam ! Clean residual mean=-0.000011 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.0941563 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.0941563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359746Jy sigma=0.000706 ! Fit after self-cal, rms=0.359754Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359754Jy sigma=0.000706 ! Fit after self-cal, rms=0.478734Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.102 mas, bmaj=9.987 mas, bpa=-3.798 degrees ! Estimated noise=891.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319279 Jy ! Component: 100 - total flux cleaned = 0.00294473 Jy ! Component: 150 - total flux cleaned = 0.00266879 Jy ! Component: 200 - total flux cleaned = 0.00243356 Jy ! Total flux subtracted in 200 components = 0.00243356 Jy ! Clean residual min=-0.008399 max=0.007046 Jy/beam ! Clean residual mean=-0.000036 rms=0.002156 Jy/beam ! Combined flux in latest and established models = 0.0965898 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.0965898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.478435Jy sigma=0.000703 ! Fit after self-cal, rms=0.480125Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148214 Jy ! Component: 100 - total flux cleaned = -0.00163978 Jy ! Component: 150 - total flux cleaned = -0.00174537 Jy ! Component: 200 - total flux cleaned = -0.00187136 Jy ! Total flux subtracted in 200 components = -0.00187136 Jy ! Clean residual min=-0.008642 max=0.006638 Jy/beam ! Clean residual mean=-0.000032 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.0947185 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 70 components and 0.0947185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.480121Jy sigma=0.000702 ! Fit after self-cal, rms=0.480116Jy sigma=0.000701 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.480116Jy sigma=0.000701 ! Fit after self-cal, rms=0.631877Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.82 mas, bmaj=18.53 mas, bpa=3.354 degrees ! Estimated noise=884.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249135 Jy ! Component: 100 - total flux cleaned = 0.00252859 Jy ! Component: 150 - total flux cleaned = 0.00252841 Jy ! Component: 200 - total flux cleaned = 0.00250301 Jy ! Total flux subtracted in 200 components = 0.00250301 Jy ! Clean residual min=-0.010811 max=0.008545 Jy/beam ! Clean residual mean=-0.000054 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.0972215 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.0972215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.631771Jy sigma=0.000701 ! Fit after self-cal, rms=0.633255Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101395 Jy ! Component: 100 - total flux cleaned = -0.00101114 Jy ! Component: 150 - total flux cleaned = -0.00103141 Jy ! Component: 200 - total flux cleaned = -0.00107072 Jy ! Total flux subtracted in 200 components = -0.00107072 Jy ! Clean residual min=-0.010708 max=0.008350 Jy/beam ! Clean residual mean=-0.000051 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.0961508 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 73 components and 0.0961508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633244Jy sigma=0.000701 ! Fit after self-cal, rms=0.633264Jy sigma=0.000701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=10.32 mas, bpa=-3.749 degrees ! Estimated noise=942.406 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.232 x 10.32 at -3.749 degrees (North through East) ! Clean map min=-0.0086252 max=0.077355 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.945 mas, bpa=-5.568 degrees ! Estimated noise=1807.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608898 Jy ! Component: 100 - total flux cleaned = 0.0771744 Jy ! Component: 150 - total flux cleaned = 0.0841585 Jy ! Component: 200 - total flux cleaned = 0.0869201 Jy ! Total flux subtracted in 200 components = 0.0869201 Jy ! Clean residual min=-0.007648 max=0.008219 Jy/beam ! Clean residual mean=-0.000014 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 0.0869201 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0869201 Jy ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=10.32 mas, bpa=-3.749 degrees ! Estimated noise=942.406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472275 Jy ! Component: 100 - total flux cleaned = 0.00595454 Jy ! Component: 150 - total flux cleaned = 0.00601295 Jy ! Component: 200 - total flux cleaned = 0.00601859 Jy ! Total flux subtracted in 200 components = 0.00601859 Jy ! Clean residual min=-0.009002 max=0.006494 Jy/beam ! Clean residual mean=-0.000029 rms=0.002220 Jy/beam ! Combined flux in latest and established models = 0.0929387 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0929387 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.82 mas, bmaj=18.53 mas, bpa=3.354 degrees ! Estimated noise=884.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143611 Jy ! Component: 100 - total flux cleaned = 0.00174537 Jy ! Component: 150 - total flux cleaned = 0.00176071 Jy ! Component: 200 - total flux cleaned = 0.0017606 Jy ! Total flux subtracted in 200 components = 0.0017606 Jy ! Clean residual min=-0.011008 max=0.008222 Jy/beam ! Clean residual mean=-0.000047 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.0946993 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.49885e-05 Jy ! Component: 100 - total flux cleaned = 2.96912e-05 Jy ! Component: 150 - total flux cleaned = 2.91895e-05 Jy ! Component: 200 - total flux cleaned = 3.02625e-05 Jy ! Total flux subtracted in 200 components = 3.02625e-05 Jy ! Clean residual min=-0.011007 max=0.008221 Jy/beam ! Clean residual mean=-0.000047 rms=0.003050 Jy/beam ! Combined flux in latest and established models = 0.0947296 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.0947296 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=10.32 mas, bpa=-3.749 degrees ! Estimated noise=942.406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149094 Jy ! Component: 100 - total flux cleaned = -0.00154083 Jy ! Component: 150 - total flux cleaned = -0.00149423 Jy ! Component: 200 - total flux cleaned = -0.00149543 Jy ! Total flux subtracted in 200 components = -0.00149543 Jy ! Clean residual min=-0.009049 max=0.006332 Jy/beam ! Clean residual mean=-0.000029 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.0932342 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0932342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633252Jy sigma=0.000701 ! Fit after self-cal, rms=0.633206Jy sigma=0.000701 wmodel J1542-0927_S_2017_03_27_pus_map.mod ! Writing 33 model components to file: J1542-0927_S_2017_03_27_pus_map.mod wobs J1542-0927_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1542-0927_S_2017_03_27_pus_uvs.fits wwins J1542-0927_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1542-0927_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00366564 Jy ! Component: 100 - total flux cleaned = -0.00513308 Jy ! Component: 150 - total flux cleaned = -0.00627757 Jy ! Component: 200 - total flux cleaned = -0.00660671 Jy ! Component: 250 - total flux cleaned = -0.00660781 Jy ! Component: 300 - total flux cleaned = -0.00671094 Jy ! Component: 350 - total flux cleaned = -0.00671067 Jy ! Component: 400 - total flux cleaned = -0.0065177 Jy ! Component: 450 - total flux cleaned = -0.00632897 Jy ! Component: 500 - total flux cleaned = -0.00623766 Jy ! Component: 550 - total flux cleaned = -0.00605829 Jy ! Component: 600 - total flux cleaned = -0.00614495 Jy ! Component: 650 - total flux cleaned = -0.00571205 Jy ! Component: 700 - total flux cleaned = -0.00562746 Jy ! Component: 750 - total flux cleaned = -0.00520751 Jy ! Component: 800 - total flux cleaned = -0.005043 Jy ! Component: 850 - total flux cleaned = -0.00487885 Jy ! Component: 900 - total flux cleaned = -0.00447461 Jy ! Component: 950 - total flux cleaned = -0.00399642 Jy ! Component: 1000 - total flux cleaned = -0.00376052 Jy ! Component: 1050 - total flux cleaned = -0.00329509 Jy ! Component: 1100 - total flux cleaned = -0.00298969 Jy ! Component: 1150 - total flux cleaned = -0.0024599 Jy ! Component: 1200 - total flux cleaned = -0.0021613 Jy ! Component: 1250 - total flux cleaned = -0.00193912 Jy ! Component: 1300 - total flux cleaned = -0.00179263 Jy ! Component: 1350 - total flux cleaned = -0.00172007 Jy ! Component: 1400 - total flux cleaned = -0.00179225 Jy ! Component: 1450 - total flux cleaned = -0.00172128 Jy ! Component: 1500 - total flux cleaned = -0.00165006 Jy ! Component: 1550 - total flux cleaned = -0.00151031 Jy ! Component: 1600 - total flux cleaned = -0.00151003 Jy ! Component: 1650 - total flux cleaned = -0.00157831 Jy ! Component: 1700 - total flux cleaned = -0.00137348 Jy ! Component: 1750 - total flux cleaned = -0.00130636 Jy ! Component: 1800 - total flux cleaned = -0.00103822 Jy ! Component: 1850 - total flux cleaned = -0.00123786 Jy ! Component: 1900 - total flux cleaned = -0.0010398 Jy ! Component: 1950 - total flux cleaned = -0.0012363 Jy ! Component: 2000 - total flux cleaned = -0.00123555 Jy ! Component: 2050 - total flux cleaned = -0.00123499 Jy ! Component: 2100 - total flux cleaned = -0.00104421 Jy ! Component: 2150 - total flux cleaned = -0.00110743 Jy ! Component: 2200 - total flux cleaned = -0.00110775 Jy ! Component: 2250 - total flux cleaned = -0.00123268 Jy ! Component: 2300 - total flux cleaned = -0.00123308 Jy ! Component: 2350 - total flux cleaned = -0.00123333 Jy ! Component: 2400 - total flux cleaned = -0.00123339 Jy ! Component: 2450 - total flux cleaned = -0.00135453 Jy ! Component: 2500 - total flux cleaned = -0.00129442 Jy ! Component: 2550 - total flux cleaned = -0.00135367 Jy ! Component: 2600 - total flux cleaned = -0.00129448 Jy ! Component: 2650 - total flux cleaned = -0.00117621 Jy ! Component: 2700 - total flux cleaned = -0.00135214 Jy ! Component: 2750 - total flux cleaned = -0.00117647 Jy ! Component: 2800 - total flux cleaned = -0.00117644 Jy ! Component: 2850 - total flux cleaned = -0.00106092 Jy ! Component: 2900 - total flux cleaned = -0.00111833 Jy ! Component: 2950 - total flux cleaned = -0.000889752 Jy ! Component: 3000 - total flux cleaned = -0.000833267 Jy ! Component: 3050 - total flux cleaned = -0.00100302 Jy ! Component: 3100 - total flux cleaned = -0.000833701 Jy ! Component: 3150 - total flux cleaned = -0.000833652 Jy ! Component: 3200 - total flux cleaned = -0.000611102 Jy ! Component: 3250 - total flux cleaned = -0.000611211 Jy ! Component: 3300 - total flux cleaned = -0.000611679 Jy ! Component: 3350 - total flux cleaned = -0.000666685 Jy ! Component: 3400 - total flux cleaned = -0.000448256 Jy ! Component: 3450 - total flux cleaned = -0.000556905 Jy ! Component: 3500 - total flux cleaned = -0.000448682 Jy ! Component: 3550 - total flux cleaned = -0.00028717 Jy ! Component: 3600 - total flux cleaned = -0.000341259 Jy ! Component: 3650 - total flux cleaned = -0.000288055 Jy ! Component: 3700 - total flux cleaned = -0.000500711 Jy ! Component: 3750 - total flux cleaned = -0.000553745 Jy ! Component: 3800 - total flux cleaned = -0.000500974 Jy ! Component: 3850 - total flux cleaned = -0.000343066 Jy ! Component: 3900 - total flux cleaned = -0.000132869 Jy ! Component: 3950 - total flux cleaned = -8.04336e-05 Jy ! Component: 4000 - total flux cleaned = 7.61487e-05 Jy ! Component: 4050 - total flux cleaned = 0.00018057 Jy ! Total flux subtracted in 4096 components = 0.000596158 Jy ! Clean residual min=-0.003046 max=0.002937 Jy/beam ! Clean residual mean=-0.000024 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.0938303 Jy keep ! Adding 348 model components to the UV plane model. ! The established model now contains 381 components and 0.0938303 Jy ![Exited script file: muppet] wmap "J1542-0927_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.232 x 10.32 at -3.749 degrees (North through East) ! Clean map min=-0.0079885 max=0.081544 Jy/beam ! Writing clean map to FITS file: J1542-0927_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0815439 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00114499 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.21242 4.21242 8.42485 16.8497 33.6994 67.3988 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.232 x 10.32 at -3.749 degrees (North through East) ! Clean map min=-0.0079885 max=0.081544 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1542-0927_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:44:18 2019