! Started logfile: J1540-2055_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:27 2019 obs J1540-2055_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1540-2055_S_2017_01_21_pus_uva.fits ! AN table 1: 95 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.662281 visibilities/baseline/integration-bin. ! Found source: J1540-2055 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 9060 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1540-2055_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 365 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985194Jy sigma=0.006077 ! Fit after self-cal, rms=0.931106Jy sigma=0.005768 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.222 mas, bmaj=6.171 mas, bpa=-5.821 degrees ! Estimated noise=1736.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554246 Jy ! Component: 100 - total flux cleaned = 0.0696299 Jy ! Total flux subtracted in 100 components = 0.0696299 Jy ! Clean residual min=-0.007160 max=0.007299 Jy/beam ! Clean residual mean=-0.000047 rms=0.001865 Jy/beam ! Combined flux in latest and established models = 0.0696299 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0696299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121151Jy sigma=0.000647 ! Fit after self-cal, rms=0.120401Jy sigma=0.000643 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=6.761 mas, bpa=-5.256 degrees ! Estimated noise=1325.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111785 Jy ! Component: 100 - total flux cleaned = 0.0173889 Jy ! Component: 150 - total flux cleaned = 0.0210954 Jy ! Component: 200 - total flux cleaned = 0.0234441 Jy ! Total flux subtracted in 200 components = 0.0234441 Jy ! Clean residual min=-0.006113 max=0.008557 Jy/beam ! Clean residual mean=-0.000060 rms=0.001882 Jy/beam ! Combined flux in latest and established models = 0.0930739 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 38 components and 0.0930739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119357Jy sigma=0.000635 ! Fit after self-cal, rms=0.119291Jy sigma=0.000634 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.05 LA 0.93 ! MK 1.08 NL 1.16 OV 1.15 PT 0.91 ! SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.11 LA 0.92 ! MK 1.12 NL 1.14 OV 1.08 PT 0.89 ! SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.08 LA 0.95 ! MK 1.10 NL 1.16 OV 0.90 PT 0.96 ! SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 0.94 LA 0.76 ! MK 0.90 NL 1.00* OV 0.82 PT 0.93 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.119291Jy sigma=0.000634 ! Fit after self-cal, rms=0.118410Jy sigma=0.000631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=6.894 mas, bpa=-5.228 degrees ! Estimated noise=1328.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250472 Jy ! Component: 100 - total flux cleaned = -0.000204174 Jy ! Component: 150 - total flux cleaned = -0.000116998 Jy ! Component: 200 - total flux cleaned = -7.80706e-05 Jy ! Total flux subtracted in 200 components = -7.80706e-05 Jy ! Clean residual min=-0.005361 max=0.007069 Jy/beam ! Clean residual mean=-0.000026 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.0929959 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.0929959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118375Jy sigma=0.000630 ! Fit after self-cal, rms=0.118707Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118707Jy sigma=0.000630 ! Fit after self-cal, rms=0.120855Jy sigma=0.000629 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.923 mas, bpa=-5.1 degrees ! Estimated noise=1338.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379148 Jy ! Component: 100 - total flux cleaned = -0.000290937 Jy ! Component: 150 - total flux cleaned = -0.000212731 Jy ! Component: 200 - total flux cleaned = -0.000211546 Jy ! Total flux subtracted in 200 components = -0.000211546 Jy ! Clean residual min=-0.004931 max=0.006196 Jy/beam ! Clean residual mean=-0.000022 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.0927843 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0927843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120824Jy sigma=0.000629 ! Fit after self-cal, rms=0.120908Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-66, -100.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482346 Jy ! Component: 100 - total flux cleaned = 0.00537732 Jy ! Component: 150 - total flux cleaned = 0.00604686 Jy ! Component: 200 - total flux cleaned = 0.00649411 Jy ! Total flux subtracted in 200 components = 0.00649411 Jy ! Clean residual min=-0.004373 max=0.004582 Jy/beam ! Clean residual mean=-0.000028 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.0992785 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.0992784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120678Jy sigma=0.000627 ! Fit after self-cal, rms=0.120414Jy sigma=0.000627 ! Inverting map ! Added new window around map position (19.5, -47.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457938 Jy ! Component: 100 - total flux cleaned = 0.00671226 Jy ! Component: 150 - total flux cleaned = 0.0071699 Jy ! Component: 200 - total flux cleaned = 0.00755913 Jy ! Total flux subtracted in 200 components = 0.00755913 Jy ! Clean residual min=-0.004226 max=0.003867 Jy/beam ! Clean residual mean=-0.000017 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.106838 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.106838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120180Jy sigma=0.000625 ! Fit after self-cal, rms=0.119971Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119971Jy sigma=0.000625 ! Fit after self-cal, rms=0.116216Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.683 mas, bmaj=6.915 mas, bpa=-5.074 degrees ! Estimated noise=1312.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317652 Jy ! Component: 100 - total flux cleaned = 0.00458484 Jy ! Component: 150 - total flux cleaned = 0.00530708 Jy ! Component: 200 - total flux cleaned = 0.00556368 Jy ! Total flux subtracted in 200 components = 0.00556368 Jy ! Clean residual min=-0.003914 max=0.003731 Jy/beam ! Clean residual mean=-0.000008 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.112401 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 96 components and 0.112401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116091Jy sigma=0.000624 ! Fit after self-cal, rms=0.115796Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231383 Jy ! Component: 100 - total flux cleaned = 0.00249238 Jy ! Component: 150 - total flux cleaned = 0.00259503 Jy ! Component: 200 - total flux cleaned = 0.00268681 Jy ! Total flux subtracted in 200 components = 0.00268681 Jy ! Clean residual min=-0.003884 max=0.003442 Jy/beam ! Clean residual mean=-0.000008 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.115088 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 108 components and 0.115088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115717Jy sigma=0.000623 ! Fit after self-cal, rms=0.115632Jy sigma=0.000623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115632Jy sigma=0.000623 ! Fit after self-cal, rms=0.113486Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.633 mas, bmaj=14.7 mas, bpa=3.872 degrees ! Estimated noise=1788.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268612 Jy ! Component: 100 - total flux cleaned = 0.0037416 Jy ! Component: 150 - total flux cleaned = 0.00399443 Jy ! Component: 200 - total flux cleaned = 0.00406245 Jy ! Total flux subtracted in 200 components = 0.00406245 Jy ! Clean residual min=-0.004501 max=0.003987 Jy/beam ! Clean residual mean=-0.000020 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.11915 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 133 components and 0.11915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113450Jy sigma=0.000623 ! Fit after self-cal, rms=0.113355Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611772 Jy ! Component: 100 - total flux cleaned = 0.000658812 Jy ! Component: 150 - total flux cleaned = 0.000660878 Jy ! Component: 200 - total flux cleaned = 0.000661969 Jy ! Total flux subtracted in 200 components = 0.000661969 Jy ! Clean residual min=-0.004459 max=0.003853 Jy/beam ! Clean residual mean=-0.000020 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.119812 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 146 components and 0.119812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113345Jy sigma=0.000622 ! Fit after self-cal, rms=0.113329Jy sigma=0.000622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=6.914 mas, bpa=-5.058 degrees ! Estimated noise=1302.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.668 x 6.914 at -5.058 degrees (North through East) ! Clean map min=-0.0045536 max=0.074181 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=6.245 mas, bpa=-5.837 degrees ! Estimated noise=1720.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538346 Jy ! Component: 100 - total flux cleaned = 0.0702336 Jy ! Component: 150 - total flux cleaned = 0.0807639 Jy ! Component: 200 - total flux cleaned = 0.0876224 Jy ! Total flux subtracted in 200 components = 0.0876224 Jy ! Clean residual min=-0.006386 max=0.006307 Jy/beam ! Clean residual mean=-0.000027 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.0876224 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0876224 Jy ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=6.914 mas, bpa=-5.058 degrees ! Estimated noise=1302.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860398 Jy ! Component: 100 - total flux cleaned = 0.014475 Jy ! Component: 150 - total flux cleaned = 0.0181063 Jy ! Component: 200 - total flux cleaned = 0.0204798 Jy ! Total flux subtracted in 200 components = 0.0204798 Jy ! Clean residual min=-0.004999 max=0.004201 Jy/beam ! Clean residual mean=-0.000022 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.108102 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.108102 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.633 mas, bmaj=14.7 mas, bpa=3.872 degrees ! Estimated noise=1788.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532382 Jy ! Component: 100 - total flux cleaned = 0.00838003 Jy ! Component: 150 - total flux cleaned = 0.00933867 Jy ! Component: 200 - total flux cleaned = 0.0100306 Jy ! Total flux subtracted in 200 components = 0.0100306 Jy ! Clean residual min=-0.004754 max=0.003828 Jy/beam ! Clean residual mean=-0.000026 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.118133 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559225 Jy ! Component: 100 - total flux cleaned = 0.000981407 Jy ! Component: 150 - total flux cleaned = 0.001106 Jy ! Component: 200 - total flux cleaned = 0.00122198 Jy ! Total flux subtracted in 200 components = 0.00122198 Jy ! Clean residual min=-0.004574 max=0.003850 Jy/beam ! Clean residual mean=-0.000022 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.119355 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 104 components and 0.119355 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=6.914 mas, bpa=-5.058 degrees ! Estimated noise=1302.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118261 Jy ! Component: 100 - total flux cleaned = -0.00151376 Jy ! Component: 150 - total flux cleaned = -0.00158781 Jy ! Component: 200 - total flux cleaned = -0.00152803 Jy ! Total flux subtracted in 200 components = -0.00152803 Jy ! Clean residual min=-0.003952 max=0.003357 Jy/beam ! Clean residual mean=-0.000009 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.117827 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.117827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113372Jy sigma=0.000622 ! Fit after self-cal, rms=0.113363Jy sigma=0.000622 wmodel J1540-2055_S_2017_01_21_pus_map.mod ! Writing 116 model components to file: J1540-2055_S_2017_01_21_pus_map.mod wobs J1540-2055_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1540-2055_S_2017_01_21_pus_uvs.fits wwins J1540-2055_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1540-2055_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000758317 Jy ! Component: 100 - total flux cleaned = -0.00123031 Jy ! Component: 150 - total flux cleaned = -0.00184068 Jy ! Component: 200 - total flux cleaned = -0.00252919 Jy ! Component: 250 - total flux cleaned = -0.00298753 Jy ! Component: 300 - total flux cleaned = -0.00347502 Jy ! Component: 350 - total flux cleaned = -0.00371075 Jy ! Component: 400 - total flux cleaned = -0.00384897 Jy ! Component: 450 - total flux cleaned = -0.00389403 Jy ! Component: 500 - total flux cleaned = -0.00402252 Jy ! Component: 550 - total flux cleaned = -0.00406436 Jy ! Component: 600 - total flux cleaned = -0.00414448 Jy ! Component: 650 - total flux cleaned = -0.00418241 Jy ! Component: 700 - total flux cleaned = -0.0041441 Jy ! Component: 750 - total flux cleaned = -0.00425407 Jy ! Component: 800 - total flux cleaned = -0.0042179 Jy ! Component: 850 - total flux cleaned = -0.00432364 Jy ! Component: 900 - total flux cleaned = -0.00428999 Jy ! Component: 950 - total flux cleaned = -0.00425772 Jy ! Component: 1000 - total flux cleaned = -0.00419227 Jy ! Component: 1050 - total flux cleaned = -0.00403259 Jy ! Component: 1100 - total flux cleaned = -0.00387756 Jy ! Component: 1150 - total flux cleaned = -0.00375582 Jy ! Component: 1200 - total flux cleaned = -0.00363636 Jy ! Component: 1250 - total flux cleaned = -0.00352001 Jy ! Component: 1300 - total flux cleaned = -0.00351968 Jy ! Component: 1350 - total flux cleaned = -0.00343571 Jy ! Component: 1400 - total flux cleaned = -0.0034639 Jy ! Component: 1450 - total flux cleaned = -0.00338188 Jy ! Component: 1500 - total flux cleaned = -0.00330138 Jy ! Component: 1550 - total flux cleaned = -0.00327515 Jy ! Component: 1600 - total flux cleaned = -0.0031968 Jy ! Component: 1650 - total flux cleaned = -0.00324786 Jy ! Component: 1700 - total flux cleaned = -0.00327252 Jy ! Component: 1750 - total flux cleaned = -0.00324795 Jy ! Component: 1800 - total flux cleaned = -0.00329721 Jy ! Component: 1850 - total flux cleaned = -0.00339342 Jy ! Component: 1900 - total flux cleaned = -0.00334549 Jy ! Component: 1950 - total flux cleaned = -0.00339262 Jy ! Component: 2000 - total flux cleaned = -0.00341582 Jy ! Component: 2050 - total flux cleaned = -0.00341562 Jy ! Component: 2100 - total flux cleaned = -0.00348328 Jy ! Component: 2150 - total flux cleaned = -0.00343857 Jy ! Component: 2200 - total flux cleaned = -0.00348267 Jy ! Component: 2250 - total flux cleaned = -0.00341751 Jy ! Component: 2300 - total flux cleaned = -0.00350383 Jy ! Component: 2350 - total flux cleaned = -0.00352468 Jy ! Component: 2400 - total flux cleaned = -0.00352456 Jy ! Component: 2450 - total flux cleaned = -0.0035867 Jy ! Component: 2500 - total flux cleaned = -0.00352568 Jy ! Component: 2550 - total flux cleaned = -0.00354613 Jy ! Component: 2600 - total flux cleaned = -0.00360627 Jy ! Component: 2650 - total flux cleaned = -0.00360611 Jy ! Component: 2700 - total flux cleaned = -0.0036456 Jy ! Component: 2750 - total flux cleaned = -0.0036648 Jy ! Component: 2800 - total flux cleaned = -0.00362651 Jy ! Component: 2850 - total flux cleaned = -0.00366426 Jy ! Component: 2900 - total flux cleaned = -0.00362673 Jy ! Component: 2950 - total flux cleaned = -0.00364535 Jy ! Component: 3000 - total flux cleaned = -0.00357241 Jy ! Component: 3050 - total flux cleaned = -0.00357252 Jy ! Component: 3100 - total flux cleaned = -0.00351885 Jy ! Component: 3150 - total flux cleaned = -0.00346552 Jy ! Component: 3200 - total flux cleaned = -0.00346552 Jy ! Component: 3250 - total flux cleaned = -0.00334331 Jy ! Component: 3300 - total flux cleaned = -0.00327406 Jy ! Component: 3350 - total flux cleaned = -0.00323976 Jy ! Component: 3400 - total flux cleaned = -0.00312076 Jy ! Component: 3450 - total flux cleaned = -0.0031039 Jy ! Component: 3500 - total flux cleaned = -0.00308696 Jy ! Component: 3550 - total flux cleaned = -0.00298735 Jy ! Component: 3600 - total flux cleaned = -0.00290511 Jy ! Component: 3650 - total flux cleaned = -0.00287241 Jy ! Component: 3700 - total flux cleaned = -0.0028725 Jy ! Component: 3750 - total flux cleaned = -0.00284026 Jy ! Component: 3800 - total flux cleaned = -0.0028563 Jy ! Component: 3850 - total flux cleaned = -0.00277695 Jy ! Component: 3900 - total flux cleaned = -0.00271419 Jy ! Component: 3950 - total flux cleaned = -0.00269841 Jy ! Component: 4000 - total flux cleaned = -0.0026364 Jy ! Component: 4050 - total flux cleaned = -0.00265168 Jy ! Total flux subtracted in 4096 components = -0.00257498 Jy ! Clean residual min=-0.000795 max=0.000855 Jy/beam ! Clean residual mean=0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.115252 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 394 components and 0.115252 Jy ![Exited script file: muppet] wmap "J1540-2055_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.668 x 6.914 at -5.058 degrees (North through East) ! Clean map min=-0.0047928 max=0.073384 Jy/beam ! Writing clean map to FITS file: J1540-2055_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0733839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03533 1.03533 2.07066 4.14132 8.28265 16.5653 33.1306 66.2612 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.668 x 6.914 at -5.058 degrees (North through East) ! Clean map min=-0.0047928 max=0.073384 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1540-2055_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:32 2019