! Started logfile: J1540-0823_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:44:08 2019 obs J1540-0823_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1540-0823_S_2017_03_27_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.868701 visibilities/baseline/integration-bin. ! Found source: J1540-0823 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 22204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1540-0823_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 769 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970771Jy sigma=0.007303 ! Fit after self-cal, rms=0.939526Jy sigma=0.007107 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=6.625 mas, bpa=-2.659 degrees ! Estimated noise=1271.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468811 Jy ! Component: 100 - total flux cleaned = 0.0584651 Jy ! Total flux subtracted in 100 components = 0.0584651 Jy ! Clean residual min=-0.003770 max=0.005128 Jy/beam ! Clean residual mean=0.000011 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.0584651 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0584651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100628Jy sigma=0.000669 ! Fit after self-cal, rms=0.100356Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=8.15 mas, bpa=-1.741 degrees ! Estimated noise=723.256 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101767 Jy ! Component: 100 - total flux cleaned = 0.0154315 Jy ! Component: 150 - total flux cleaned = 0.0185158 Jy ! Component: 200 - total flux cleaned = 0.0204754 Jy ! Total flux subtracted in 200 components = 0.0204754 Jy ! Clean residual min=-0.002623 max=0.003620 Jy/beam ! Clean residual mean=0.000009 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0789405 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 59 components and 0.0789405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099256Jy sigma=0.000660 ! Fit after self-cal, rms=0.099164Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.06 KP 1.04 ! LA 1.00 MK 1.04 NL 1.02 OV 1.13 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 1.14 KP 0.98 ! LA 0.96 MK 1.01 NL 1.05 OV 1.09 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.25 KP 0.97 ! LA 0.98 MK 1.06 NL 1.04 OV 1.05 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.93 HN 0.82 KP 1.00* ! LA 0.63 MK 1.06 NL 1.00* OV 0.77 ! PT 0.99 SC 0.97 ! ! ! Fit before self-cal, rms=0.099164Jy sigma=0.000659 ! Fit after self-cal, rms=0.095995Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=8.264 mas, bpa=-1.752 degrees ! Estimated noise=723.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159423 Jy ! Component: 100 - total flux cleaned = 0.00167314 Jy ! Component: 150 - total flux cleaned = 0.00167432 Jy ! Component: 200 - total flux cleaned = 0.00170411 Jy ! Total flux subtracted in 200 components = 0.00170411 Jy ! Clean residual min=-0.001761 max=0.002539 Jy/beam ! Clean residual mean=0.000004 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0806446 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.0806446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095954Jy sigma=0.000656 ! Fit after self-cal, rms=0.095971Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095971Jy sigma=0.000655 ! Fit after self-cal, rms=0.096026Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=8.286 mas, bpa=-1.805 degrees ! Estimated noise=727.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880618 Jy ! Component: 100 - total flux cleaned = 0.000998504 Jy ! Component: 150 - total flux cleaned = 0.00104889 Jy ! Component: 200 - total flux cleaned = 0.00104878 Jy ! Total flux subtracted in 200 components = 0.00104878 Jy ! Clean residual min=-0.001778 max=0.002296 Jy/beam ! Clean residual mean=0.000002 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0816934 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.0816934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096006Jy sigma=0.000654 ! Fit after self-cal, rms=0.096018Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214694 Jy ! Component: 100 - total flux cleaned = 0.00267039 Jy ! Component: 150 - total flux cleaned = 0.00293227 Jy ! Component: 200 - total flux cleaned = 0.00305481 Jy ! Total flux subtracted in 200 components = 0.00305481 Jy ! Clean residual min=-0.001557 max=0.001748 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0847482 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.0847482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095960Jy sigma=0.000653 ! Fit after self-cal, rms=0.095943Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095943Jy sigma=0.000653 ! Fit after self-cal, rms=0.095478Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.269 mas, bpa=-1.772 degrees ! Estimated noise=725.146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116564 Jy ! Component: 100 - total flux cleaned = 0.00158313 Jy ! Component: 150 - total flux cleaned = 0.00172652 Jy ! Component: 200 - total flux cleaned = 0.00180434 Jy ! Total flux subtracted in 200 components = 0.00180434 Jy ! Clean residual min=-0.001572 max=0.001696 Jy/beam ! Clean residual mean=-0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0865525 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.0865525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095451Jy sigma=0.000653 ! Fit after self-cal, rms=0.095449Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508842 Jy ! Component: 100 - total flux cleaned = 0.000593952 Jy ! Component: 150 - total flux cleaned = 0.000594793 Jy ! Component: 200 - total flux cleaned = 0.000572518 Jy ! Total flux subtracted in 200 components = 0.000572518 Jy ! Clean residual min=-0.001544 max=0.001690 Jy/beam ! Clean residual mean=-0.000001 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0871251 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.0871251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095433Jy sigma=0.000652 ! Fit after self-cal, rms=0.095430Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095430Jy sigma=0.000652 ! Fit after self-cal, rms=0.095069Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.348 mas, bmaj=14.28 mas, bpa=4.692 degrees ! Estimated noise=873.319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910177 Jy ! Component: 100 - total flux cleaned = 0.00116136 Jy ! Component: 150 - total flux cleaned = 0.00125312 Jy ! Component: 200 - total flux cleaned = 0.00126638 Jy ! Total flux subtracted in 200 components = 0.00126638 Jy ! Clean residual min=-0.001598 max=0.001460 Jy/beam ! Clean residual mean=-0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0883914 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 127 components and 0.0883915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095065Jy sigma=0.000652 ! Fit after self-cal, rms=0.095058Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192789 Jy ! Component: 100 - total flux cleaned = 0.000252969 Jy ! Component: 150 - total flux cleaned = 0.000265842 Jy ! Component: 200 - total flux cleaned = 0.000265886 Jy ! Total flux subtracted in 200 components = 0.000265886 Jy ! Clean residual min=-0.001571 max=0.001487 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0886573 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 132 components and 0.0886573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095056Jy sigma=0.000652 ! Fit after self-cal, rms=0.095058Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=8.253 mas, bpa=-1.751 degrees ! Estimated noise=723.942 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.469 x 8.253 at -1.751 degrees (North through East) ! Clean map min=-0.0017581 max=0.060885 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=6.694 mas, bpa=-2.842 degrees ! Estimated noise=1268.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460923 Jy ! Component: 100 - total flux cleaned = 0.058879 Jy ! Component: 150 - total flux cleaned = 0.0666131 Jy ! Component: 200 - total flux cleaned = 0.0719512 Jy ! Total flux subtracted in 200 components = 0.0719512 Jy ! Clean residual min=-0.003196 max=0.003176 Jy/beam ! Clean residual mean=0.000005 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.0719512 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0719512 Jy ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=8.253 mas, bpa=-1.751 degrees ! Estimated noise=723.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053739 Jy ! Component: 100 - total flux cleaned = 0.00875665 Jy ! Component: 150 - total flux cleaned = 0.0112033 Jy ! Component: 200 - total flux cleaned = 0.012563 Jy ! Total flux subtracted in 200 components = 0.012563 Jy ! Clean residual min=-0.001680 max=0.001789 Jy/beam ! Clean residual mean=0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0845142 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 41 components and 0.0845142 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.348 mas, bmaj=14.28 mas, bpa=4.692 degrees ! Estimated noise=873.319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178142 Jy ! Component: 100 - total flux cleaned = 0.00260601 Jy ! Component: 150 - total flux cleaned = 0.00301507 Jy ! Component: 200 - total flux cleaned = 0.00326668 Jy ! Total flux subtracted in 200 components = 0.00326668 Jy ! Clean residual min=-0.001624 max=0.001606 Jy/beam ! Clean residual mean=-0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0877809 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162028 Jy ! Component: 100 - total flux cleaned = 0.000281095 Jy ! Component: 150 - total flux cleaned = 0.000368446 Jy ! Component: 200 - total flux cleaned = 0.000446862 Jy ! Total flux subtracted in 200 components = 0.000446862 Jy ! Clean residual min=-0.001576 max=0.001499 Jy/beam ! Clean residual mean=-0.000001 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0882278 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 99 components and 0.0882278 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=8.253 mas, bpa=-1.751 degrees ! Estimated noise=723.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303183 Jy ! Component: 100 - total flux cleaned = -0.000336409 Jy ! Component: 150 - total flux cleaned = -0.000306929 Jy ! Component: 200 - total flux cleaned = -0.000307321 Jy ! Total flux subtracted in 200 components = -0.000307321 Jy ! Clean residual min=-0.001464 max=0.001676 Jy/beam ! Clean residual mean=-0.000000 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0879205 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.0879204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095059Jy sigma=0.000652 ! Fit after self-cal, rms=0.095065Jy sigma=0.000652 wmodel J1540-0823_S_2017_03_27_pus_map.mod ! Writing 114 model components to file: J1540-0823_S_2017_03_27_pus_map.mod wobs J1540-0823_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1540-0823_S_2017_03_27_pus_uvs.fits wwins J1540-0823_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1540-0823_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485321 Jy ! Component: 100 - total flux cleaned = 0.0007063 Jy ! Component: 150 - total flux cleaned = 0.000918554 Jy ! Component: 200 - total flux cleaned = 0.00120071 Jy ! Component: 250 - total flux cleaned = 0.0013995 Jy ! Component: 300 - total flux cleaned = 0.00144836 Jy ! Component: 350 - total flux cleaned = 0.00152019 Jy ! Component: 400 - total flux cleaned = 0.00161376 Jy ! Component: 450 - total flux cleaned = 0.00168264 Jy ! Component: 500 - total flux cleaned = 0.00175024 Jy ! Component: 550 - total flux cleaned = 0.00181648 Jy ! Component: 600 - total flux cleaned = 0.00190335 Jy ! Component: 650 - total flux cleaned = 0.0019891 Jy ! Component: 700 - total flux cleaned = 0.00203173 Jy ! Component: 750 - total flux cleaned = 0.00215639 Jy ! Component: 800 - total flux cleaned = 0.00219733 Jy ! Component: 850 - total flux cleaned = 0.00219763 Jy ! Component: 900 - total flux cleaned = 0.00225769 Jy ! Component: 950 - total flux cleaned = 0.00227724 Jy ! Component: 1000 - total flux cleaned = 0.00225814 Jy ! Component: 1050 - total flux cleaned = 0.00227727 Jy ! Component: 1100 - total flux cleaned = 0.00225846 Jy ! Component: 1150 - total flux cleaned = 0.00223979 Jy ! Component: 1200 - total flux cleaned = 0.00227712 Jy ! Component: 1250 - total flux cleaned = 0.00224032 Jy ! Component: 1300 - total flux cleaned = 0.00222198 Jy ! Component: 1350 - total flux cleaned = 0.00218594 Jy ! Component: 1400 - total flux cleaned = 0.00218605 Jy ! Component: 1450 - total flux cleaned = 0.00215045 Jy ! Component: 1500 - total flux cleaned = 0.00216787 Jy ! Component: 1550 - total flux cleaned = 0.00211583 Jy ! Component: 1600 - total flux cleaned = 0.00215032 Jy ! Component: 1650 - total flux cleaned = 0.00211607 Jy ! Component: 1700 - total flux cleaned = 0.0021162 Jy ! Component: 1750 - total flux cleaned = 0.00221721 Jy ! Component: 1800 - total flux cleaned = 0.0022005 Jy ! Component: 1850 - total flux cleaned = 0.00225013 Jy ! Component: 1900 - total flux cleaned = 0.00223375 Jy ! Component: 1950 - total flux cleaned = 0.00225006 Jy ! Component: 2000 - total flux cleaned = 0.00228236 Jy ! Component: 2050 - total flux cleaned = 0.00228255 Jy ! Component: 2100 - total flux cleaned = 0.00231439 Jy ! Component: 2150 - total flux cleaned = 0.00233012 Jy ! Component: 2200 - total flux cleaned = 0.00234576 Jy ! Component: 2250 - total flux cleaned = 0.00242379 Jy ! Component: 2300 - total flux cleaned = 0.00237712 Jy ! Component: 2350 - total flux cleaned = 0.0024234 Jy ! Component: 2400 - total flux cleaned = 0.00239265 Jy ! Component: 2450 - total flux cleaned = 0.00248394 Jy ! Component: 2500 - total flux cleaned = 0.00245357 Jy ! Component: 2550 - total flux cleaned = 0.00246857 Jy ! Component: 2600 - total flux cleaned = 0.00242395 Jy ! Component: 2650 - total flux cleaned = 0.00245357 Jy ! Component: 2700 - total flux cleaned = 0.00248319 Jy ! Component: 2750 - total flux cleaned = 0.00248317 Jy ! Component: 2800 - total flux cleaned = 0.0025704 Jy ! Component: 2850 - total flux cleaned = 0.00252702 Jy ! Component: 2900 - total flux cleaned = 0.00255571 Jy ! Component: 2950 - total flux cleaned = 0.00258432 Jy ! Component: 3000 - total flux cleaned = 0.00266939 Jy ! Component: 3050 - total flux cleaned = 0.00262701 Jy ! Component: 3100 - total flux cleaned = 0.00268308 Jy ! Component: 3150 - total flux cleaned = 0.00266919 Jy ! Component: 3200 - total flux cleaned = 0.00272459 Jy ! Component: 3250 - total flux cleaned = 0.00271083 Jy ! Component: 3300 - total flux cleaned = 0.00272449 Jy ! Component: 3350 - total flux cleaned = 0.00275185 Jy ! Component: 3400 - total flux cleaned = 0.00272458 Jy ! Component: 3450 - total flux cleaned = 0.00273803 Jy ! Component: 3500 - total flux cleaned = 0.00277832 Jy ! Component: 3550 - total flux cleaned = 0.00277829 Jy ! Component: 3600 - total flux cleaned = 0.00283133 Jy ! Component: 3650 - total flux cleaned = 0.00277845 Jy ! Component: 3700 - total flux cleaned = 0.00280475 Jy ! Component: 3750 - total flux cleaned = 0.00281791 Jy ! Component: 3800 - total flux cleaned = 0.00280474 Jy ! Component: 3850 - total flux cleaned = 0.00279177 Jy ! Component: 3900 - total flux cleaned = 0.00286901 Jy ! Component: 3950 - total flux cleaned = 0.002792 Jy ! Component: 4000 - total flux cleaned = 0.0028302 Jy ! Component: 4050 - total flux cleaned = 0.0028175 Jy ! Total flux subtracted in 4096 components = 0.0028301 Jy ! Clean residual min=-0.000746 max=0.000821 Jy/beam ! Clean residual mean=-0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0907506 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 398 components and 0.0907506 Jy ![Exited script file: muppet] wmap "J1540-0823_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.469 x 8.253 at -1.751 degrees (North through East) ! Clean map min=-0.0013936 max=0.060705 Jy/beam ! Writing clean map to FITS file: J1540-0823_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0607049 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16592 1.16592 2.33184 4.66368 9.32736 18.6547 37.3094 74.6189 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.469 x 8.253 at -1.751 degrees (North through East) ! Clean map min=-0.0013936 max=0.060705 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1540-0823_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:44:12 2019