! Started logfile: J1539+2744_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:16:32 2019 obs J1539+2744_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1539+2744_S_2017_01_16_pus_uva.fits ! AN table 1: 168 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696164 visibilities/baseline/integration-bin. ! Found source: J1539+2744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 21052 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1539+2744_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 271 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 271 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 271 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 650 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930516Jy sigma=0.007981 ! Fit after self-cal, rms=0.917298Jy sigma=0.007910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.502 mas, bmaj=7.85 mas, bpa=4.731 degrees ! Estimated noise=918.646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0672891 Jy ! Component: 100 - total flux cleaned = 0.0821234 Jy ! Total flux subtracted in 100 components = 0.0821234 Jy ! Clean residual min=-0.003671 max=0.004802 Jy/beam ! Clean residual mean=-0.000009 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.0821234 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0821234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105328Jy sigma=0.000663 ! Fit after self-cal, rms=0.105321Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.205 mas, bmaj=8.757 mas, bpa=2.344 degrees ! Estimated noise=617.538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053268 Jy ! Component: 100 - total flux cleaned = 0.00779489 Jy ! Component: 150 - total flux cleaned = 0.00853781 Jy ! Component: 200 - total flux cleaned = 0.0087183 Jy ! Total flux subtracted in 200 components = 0.0087183 Jy ! Clean residual min=-0.002043 max=0.001946 Jy/beam ! Clean residual mean=-0.000003 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0908417 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0908417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105005Jy sigma=0.000660 ! Fit after self-cal, rms=0.104996Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.95 HN 0.96 KP 1.01 ! LA 1.02 MK 1.00* NL 0.92 OV 1.00 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.97 KP 0.96 ! LA 0.97 MK 1.00* NL 1.07 OV 1.04 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.97 HN 0.94 KP 1.03 ! LA 1.00 MK 1.00* NL 1.06 OV 0.97 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 0.96 KP 1.00* ! LA 0.98 MK 1.00* NL 1.00* OV 0.96 ! PT 0.98 SC 0.43 ! ! ! Fit before self-cal, rms=0.104996Jy sigma=0.000660 ! Fit after self-cal, rms=0.085306Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.162 mas, bmaj=8.774 mas, bpa=1.69 degrees ! Estimated noise=615.746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373209 Jy ! Component: 100 - total flux cleaned = 0.00042703 Jy ! Component: 150 - total flux cleaned = 0.000442549 Jy ! Component: 200 - total flux cleaned = 0.000442818 Jy ! Total flux subtracted in 200 components = 0.000442818 Jy ! Clean residual min=-0.001821 max=0.001564 Jy/beam ! Clean residual mean=-0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0912845 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.0912845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085298Jy sigma=0.000658 ! Fit after self-cal, rms=0.085263Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085263Jy sigma=0.000658 ! Fit after self-cal, rms=0.084653Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.177 mas, bmaj=8.765 mas, bpa=1.116 degrees ! Estimated noise=616.649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225142 Jy ! Component: 100 - total flux cleaned = -0.000185854 Jy ! Component: 150 - total flux cleaned = -0.000170625 Jy ! Component: 200 - total flux cleaned = -0.000147118 Jy ! Total flux subtracted in 200 components = -0.000147118 Jy ! Clean residual min=-0.001516 max=0.001717 Jy/beam ! Clean residual mean=-0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0911373 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.0911373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084645Jy sigma=0.000656 ! Fit after self-cal, rms=0.084664Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-121, 79). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143719 Jy ! Component: 100 - total flux cleaned = 0.00140539 Jy ! Component: 150 - total flux cleaned = 0.00138186 Jy ! Component: 200 - total flux cleaned = 0.00138185 Jy ! Total flux subtracted in 200 components = 0.00138185 Jy ! Clean residual min=-0.001470 max=0.001457 Jy/beam ! Clean residual mean=-0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0925192 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.0925192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084637Jy sigma=0.000656 ! Fit after self-cal, rms=0.084634Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084634Jy sigma=0.000656 ! Fit after self-cal, rms=0.084538Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.176 mas, bmaj=8.764 mas, bpa=0.8739 degrees ! Estimated noise=615.269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340944 Jy ! Component: 100 - total flux cleaned = 0.000321916 Jy ! Component: 150 - total flux cleaned = 0.000285412 Jy ! Component: 200 - total flux cleaned = 0.000236507 Jy ! Total flux subtracted in 200 components = 0.000236507 Jy ! Clean residual min=-0.001448 max=0.001440 Jy/beam ! Clean residual mean=-0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0927557 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.0927557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084529Jy sigma=0.000656 ! Fit after self-cal, rms=0.084532Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.42846e-05 Jy ! Component: 100 - total flux cleaned = 4.97004e-05 Jy ! Component: 150 - total flux cleaned = 8.26138e-06 Jy ! Component: 200 - total flux cleaned = -1.82233e-05 Jy ! Total flux subtracted in 200 components = -1.82233e-05 Jy ! Clean residual min=-0.001446 max=0.001406 Jy/beam ! Clean residual mean=-0.000001 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0927375 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 98 components and 0.0927375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084528Jy sigma=0.000656 ! Fit after self-cal, rms=0.084527Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084527Jy sigma=0.000656 ! Fit after self-cal, rms=0.084517Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.285 mas, bmaj=10.36 mas, bpa=-8.808 degrees ! Estimated noise=678.672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.91413e-06 Jy ! Component: 100 - total flux cleaned = 2.88419e-05 Jy ! Component: 150 - total flux cleaned = 3.89624e-05 Jy ! Component: 200 - total flux cleaned = 4.75673e-05 Jy ! Total flux subtracted in 200 components = 4.75673e-05 Jy ! Clean residual min=-0.001667 max=0.001414 Jy/beam ! Clean residual mean=-0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0927851 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.0927851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084515Jy sigma=0.000656 ! Fit after self-cal, rms=0.084516Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.93417e-06 Jy ! Component: 100 - total flux cleaned = 1.8383e-05 Jy ! Component: 150 - total flux cleaned = 2.61325e-05 Jy ! Component: 200 - total flux cleaned = 4.03694e-05 Jy ! Total flux subtracted in 200 components = 4.03694e-05 Jy ! Clean residual min=-0.001671 max=0.001414 Jy/beam ! Clean residual mean=-0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0928254 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 121 components and 0.0928254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084515Jy sigma=0.000656 ! Fit after self-cal, rms=0.084514Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.175 mas, bmaj=8.763 mas, bpa=0.7829 degrees ! Estimated noise=614.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.175 x 8.763 at 0.7829 degrees (North through East) ! Clean map min=-0.0014227 max=0.086061 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.472 mas, bmaj=7.83 mas, bpa=3.385 degrees ! Estimated noise=909.361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0664955 Jy ! Component: 100 - total flux cleaned = 0.0811427 Jy ! Component: 150 - total flux cleaned = 0.0860302 Jy ! Component: 200 - total flux cleaned = 0.0887998 Jy ! Total flux subtracted in 200 components = 0.0887998 Jy ! Clean residual min=-0.002536 max=0.002367 Jy/beam ! Clean residual mean=-0.000004 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0887999 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0887999 Jy ! Inverting map and beam ! Estimated beam: bmin=5.175 mas, bmaj=8.763 mas, bpa=0.7829 degrees ! Estimated noise=614.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180293 Jy ! Component: 100 - total flux cleaned = 0.0024173 Jy ! Component: 150 - total flux cleaned = 0.002601 Jy ! Component: 200 - total flux cleaned = 0.00279494 Jy ! Total flux subtracted in 200 components = 0.00279494 Jy ! Clean residual min=-0.001430 max=0.001523 Jy/beam ! Clean residual mean=-0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0915948 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.0915948 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.285 mas, bmaj=10.36 mas, bpa=-8.808 degrees ! Estimated noise=678.672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209457 Jy ! Component: 100 - total flux cleaned = 0.000343051 Jy ! Component: 150 - total flux cleaned = 0.000493716 Jy ! Component: 200 - total flux cleaned = 0.000592545 Jy ! Total flux subtracted in 200 components = 0.000592545 Jy ! Clean residual min=-0.001578 max=0.001463 Jy/beam ! Clean residual mean=-0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0921874 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.82967e-05 Jy ! Component: 100 - total flux cleaned = 0.000167815 Jy ! Component: 150 - total flux cleaned = 0.000227384 Jy ! Component: 200 - total flux cleaned = 0.000292301 Jy ! Total flux subtracted in 200 components = 0.000292301 Jy ! Clean residual min=-0.001606 max=0.001462 Jy/beam ! Clean residual mean=-0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0924797 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 88 components and 0.0924797 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.175 mas, bmaj=8.763 mas, bpa=0.7829 degrees ! Estimated noise=614.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.09467e-05 Jy ! Component: 100 - total flux cleaned = 0.00010765 Jy ! Component: 150 - total flux cleaned = 0.000108133 Jy ! Component: 200 - total flux cleaned = 8.0456e-05 Jy ! Total flux subtracted in 200 components = 8.0456e-05 Jy ! Clean residual min=-0.001460 max=0.001430 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0925602 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 111 components and 0.0925601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084523Jy sigma=0.000656 ! Fit after self-cal, rms=0.084519Jy sigma=0.000656 wmodel J1539+2744_S_2017_01_16_pus_map.mod ! Writing 111 model components to file: J1539+2744_S_2017_01_16_pus_map.mod wobs J1539+2744_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1539+2744_S_2017_01_16_pus_uvs.fits wwins J1539+2744_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J1539+2744_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013822 Jy ! Component: 100 - total flux cleaned = -6.72784e-05 Jy ! Component: 150 - total flux cleaned = 4.21747e-05 Jy ! Component: 200 - total flux cleaned = 8.49795e-05 Jy ! Component: 250 - total flux cleaned = 0.000105439 Jy ! Component: 300 - total flux cleaned = 0.000105213 Jy ! Component: 350 - total flux cleaned = 0.000143233 Jy ! Component: 400 - total flux cleaned = 0.000217563 Jy ! Component: 450 - total flux cleaned = 0.000253555 Jy ! Component: 500 - total flux cleaned = 0.000289189 Jy ! Component: 550 - total flux cleaned = 0.000323753 Jy ! Component: 600 - total flux cleaned = 0.000340704 Jy ! Component: 650 - total flux cleaned = 0.000357708 Jy ! Component: 700 - total flux cleaned = 0.000457291 Jy ! Component: 750 - total flux cleaned = 0.000473277 Jy ! Component: 800 - total flux cleaned = 0.000489575 Jy ! Component: 850 - total flux cleaned = 0.000568241 Jy ! Component: 900 - total flux cleaned = 0.00058371 Jy ! Component: 950 - total flux cleaned = 0.000629548 Jy ! Component: 1000 - total flux cleaned = 0.000644422 Jy ! Component: 1050 - total flux cleaned = 0.000674283 Jy ! Component: 1100 - total flux cleaned = 0.000674331 Jy ! Component: 1150 - total flux cleaned = 0.000674295 Jy ! Component: 1200 - total flux cleaned = 0.000660052 Jy ! Component: 1250 - total flux cleaned = 0.000674499 Jy ! Component: 1300 - total flux cleaned = 0.000688692 Jy ! Component: 1350 - total flux cleaned = 0.000729882 Jy ! Component: 1400 - total flux cleaned = 0.000715919 Jy ! Component: 1450 - total flux cleaned = 0.000702478 Jy ! Component: 1500 - total flux cleaned = 0.00072912 Jy ! Component: 1550 - total flux cleaned = 0.000754963 Jy ! Component: 1600 - total flux cleaned = 0.00071623 Jy ! Component: 1650 - total flux cleaned = 0.000754563 Jy ! Component: 1700 - total flux cleaned = 0.000741916 Jy ! Component: 1750 - total flux cleaned = 0.000741972 Jy ! Component: 1800 - total flux cleaned = 0.000779112 Jy ! Component: 1850 - total flux cleaned = 0.000778964 Jy ! Component: 1900 - total flux cleaned = 0.000827141 Jy ! Component: 1950 - total flux cleaned = 0.000791175 Jy ! Component: 2000 - total flux cleaned = 0.00077942 Jy ! Component: 2050 - total flux cleaned = 0.000767774 Jy ! Component: 2100 - total flux cleaned = 0.00076784 Jy ! Component: 2150 - total flux cleaned = 0.00080213 Jy ! Component: 2200 - total flux cleaned = 0.000779295 Jy ! Component: 2250 - total flux cleaned = 0.000801976 Jy ! Component: 2300 - total flux cleaned = 0.000790861 Jy ! Component: 2350 - total flux cleaned = 0.000846265 Jy ! Component: 2400 - total flux cleaned = 0.000824185 Jy ! Component: 2450 - total flux cleaned = 0.000813361 Jy ! Component: 2500 - total flux cleaned = 0.000835238 Jy ! Component: 2550 - total flux cleaned = 0.000846011 Jy ! Component: 2600 - total flux cleaned = 0.000856673 Jy ! Component: 2650 - total flux cleaned = 0.000824908 Jy ! Component: 2700 - total flux cleaned = 0.00083545 Jy ! Component: 2750 - total flux cleaned = 0.000835414 Jy ! Component: 2800 - total flux cleaned = 0.000824912 Jy ! Component: 2850 - total flux cleaned = 0.000824857 Jy ! Component: 2900 - total flux cleaned = 0.000794268 Jy ! Component: 2950 - total flux cleaned = 0.00078408 Jy ! Component: 3000 - total flux cleaned = 0.000784035 Jy ! Component: 3050 - total flux cleaned = 0.000784166 Jy ! Component: 3100 - total flux cleaned = 0.000813831 Jy ! Component: 3150 - total flux cleaned = 0.000794059 Jy ! Component: 3200 - total flux cleaned = 0.000803877 Jy ! Component: 3250 - total flux cleaned = 0.000803864 Jy ! Component: 3300 - total flux cleaned = 0.000794204 Jy ! Component: 3350 - total flux cleaned = 0.000813353 Jy ! Component: 3400 - total flux cleaned = 0.000813364 Jy ! Component: 3450 - total flux cleaned = 0.000813291 Jy ! Component: 3500 - total flux cleaned = 0.000822699 Jy ! Component: 3550 - total flux cleaned = 0.00078522 Jy ! Component: 3600 - total flux cleaned = 0.000775935 Jy ! Component: 3650 - total flux cleaned = 0.000785217 Jy ! Component: 3700 - total flux cleaned = 0.000775995 Jy ! Component: 3750 - total flux cleaned = 0.000766843 Jy ! Component: 3800 - total flux cleaned = 0.000775998 Jy ! Component: 3850 - total flux cleaned = 0.000757846 Jy ! Component: 3900 - total flux cleaned = 0.000757828 Jy ! Component: 3950 - total flux cleaned = 0.000713147 Jy ! Component: 4000 - total flux cleaned = 0.00069542 Jy ! Component: 4050 - total flux cleaned = 0.00071313 Jy ! Total flux subtracted in 4096 components = 0.000704278 Jy ! Clean residual min=-0.000508 max=0.000496 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.0932644 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 432 components and 0.0932644 Jy ![Exited script file: muppet] wmap "J1539+2744_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.175 x 8.763 at 0.7829 degrees (North through East) ! Clean map min=-0.0010727 max=0.086098 Jy/beam ! Writing clean map to FITS file: J1539+2744_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0860978 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172363 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.600585 0.600585 1.20117 2.40234 4.80468 9.60937 19.2187 38.4375 76.8749 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.175 x 8.763 at 0.7829 degrees (North through East) ! Clean map min=-0.0010727 max=0.086098 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1539+2744_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:16:38 2019