! Started logfile: J1539+0430_S_2017_03_23_pus_uvs.log on Mon May 13 10:02:57 2019 obs J1539+0430_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1539+0430_S_2017_03_23_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.815529 visibilities/baseline/integration-bin. ! Found source: J1539+0430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 12184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1539+0430_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948825Jy sigma=0.007806 ! Fit after self-cal, rms=0.931474Jy sigma=0.007694 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.085 mas, bpa=-5.307 degrees ! Estimated noise=1230.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548454 Jy ! Component: 100 - total flux cleaned = 0.0678066 Jy ! Total flux subtracted in 100 components = 0.0678066 Jy ! Clean residual min=-0.004345 max=0.004880 Jy/beam ! Clean residual mean=0.000009 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0678066 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0678066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090029Jy sigma=0.000667 ! Fit after self-cal, rms=0.089947Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.677 mas, bmaj=8.085 mas, bpa=-2.332 degrees ! Estimated noise=884.741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524774 Jy ! Component: 100 - total flux cleaned = 0.00747833 Jy ! Component: 150 - total flux cleaned = 0.00873527 Jy ! Component: 200 - total flux cleaned = 0.00933684 Jy ! Total flux subtracted in 200 components = 0.00933684 Jy ! Clean residual min=-0.003273 max=0.003037 Jy/beam ! Clean residual mean=0.000011 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0771435 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.0771435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089615Jy sigma=0.000664 ! Fit after self-cal, rms=0.089636Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.95 KP 1.01 ! LA 1.02 MK 1.05 NL 0.87 OV 1.07 ! PT 1.03 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 1.05 KP 1.07 ! LA 0.92 MK 1.07 NL 1.04 OV 1.07 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 0.97 KP 0.90 ! LA 0.80 MK 1.03 NL 1.07 OV 0.98 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 0.86 KP 1.00* ! LA 0.88 MK 1.12 NL 1.00* OV 1.28 ! PT 1.06 SC 1.14 ! ! ! Fit before self-cal, rms=0.089636Jy sigma=0.000664 ! Fit after self-cal, rms=0.087857Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=8.109 mas, bpa=-1.902 degrees ! Estimated noise=886.525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214363 Jy ! Component: 100 - total flux cleaned = 0.000193733 Jy ! Component: 150 - total flux cleaned = 0.000193866 Jy ! Component: 200 - total flux cleaned = 0.00017594 Jy ! Total flux subtracted in 200 components = 0.00017594 Jy ! Clean residual min=-0.002672 max=0.002920 Jy/beam ! Clean residual mean=0.000013 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0773194 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0773194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087849Jy sigma=0.000661 ! Fit after self-cal, rms=0.087823Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087823Jy sigma=0.000660 ! Fit after self-cal, rms=0.087841Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.698 mas, bmaj=8.095 mas, bpa=-1.927 degrees ! Estimated noise=885.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176263 Jy ! Component: 100 - total flux cleaned = 0.000193696 Jy ! Component: 150 - total flux cleaned = 0.000193396 Jy ! Component: 200 - total flux cleaned = 0.000208088 Jy ! Total flux subtracted in 200 components = 0.000208088 Jy ! Clean residual min=-0.002891 max=0.002314 Jy/beam ! Clean residual mean=0.000005 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0775275 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.0775275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087835Jy sigma=0.000658 ! Fit after self-cal, rms=0.087912Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02834e-05 Jy ! Component: 100 - total flux cleaned = -1.03273e-05 Jy ! Component: 150 - total flux cleaned = 1.81989e-05 Jy ! Component: 200 - total flux cleaned = 3.19556e-05 Jy ! Total flux subtracted in 200 components = 3.19556e-05 Jy ! Clean residual min=-0.002826 max=0.002326 Jy/beam ! Clean residual mean=0.000005 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0775595 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0775594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087907Jy sigma=0.000658 ! Fit after self-cal, rms=0.087908Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087908Jy sigma=0.000658 ! Fit after self-cal, rms=0.087869Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=8.086 mas, bpa=-2.046 degrees ! Estimated noise=883.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100517 Jy ! Component: 100 - total flux cleaned = 0.000131415 Jy ! Component: 150 - total flux cleaned = 0.000144887 Jy ! Component: 200 - total flux cleaned = 0.000170867 Jy ! Total flux subtracted in 200 components = 0.000170867 Jy ! Clean residual min=-0.002864 max=0.002258 Jy/beam ! Clean residual mean=0.000004 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0777303 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0777303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087864Jy sigma=0.000657 ! Fit after self-cal, rms=0.087885Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.21142e-06 Jy ! Component: 100 - total flux cleaned = -8.53407e-06 Jy ! Component: 150 - total flux cleaned = 1.61669e-05 Jy ! Component: 200 - total flux cleaned = 2.82137e-05 Jy ! Total flux subtracted in 200 components = 2.82137e-05 Jy ! Clean residual min=-0.002844 max=0.002263 Jy/beam ! Clean residual mean=0.000004 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0777585 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0777585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087882Jy sigma=0.000657 ! Fit after self-cal, rms=0.087882Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087882Jy sigma=0.000657 ! Fit after self-cal, rms=0.087685Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.754 mas, bmaj=11.81 mas, bpa=2.675 degrees ! Estimated noise=1037.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438055 Jy ! Component: 100 - total flux cleaned = 0.000516819 Jy ! Component: 150 - total flux cleaned = 0.000539827 Jy ! Component: 200 - total flux cleaned = 0.000568681 Jy ! Total flux subtracted in 200 components = 0.000568681 Jy ! Clean residual min=-0.002355 max=0.002045 Jy/beam ! Clean residual mean=0.000007 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0783272 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.0783272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087685Jy sigma=0.000657 ! Fit after self-cal, rms=0.087690Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.81641e-05 Jy ! Component: 100 - total flux cleaned = 4.30071e-05 Jy ! Component: 150 - total flux cleaned = 4.98375e-05 Jy ! Component: 200 - total flux cleaned = 5.64743e-05 Jy ! Total flux subtracted in 200 components = 5.64743e-05 Jy ! Clean residual min=-0.002346 max=0.002044 Jy/beam ! Clean residual mean=0.000007 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0783837 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.0783837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087690Jy sigma=0.000657 ! Fit after self-cal, rms=0.087691Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.079 mas, bpa=-2.153 degrees ! Estimated noise=881.771 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 8.079 at -2.153 degrees (North through East) ! Clean map min=-0.0027333 max=0.070602 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=7.09 mas, bpa=-4.901 degrees ! Estimated noise=1217.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0541239 Jy ! Component: 100 - total flux cleaned = 0.0671384 Jy ! Component: 150 - total flux cleaned = 0.0723261 Jy ! Component: 200 - total flux cleaned = 0.0750422 Jy ! Total flux subtracted in 200 components = 0.0750422 Jy ! Clean residual min=-0.003591 max=0.003302 Jy/beam ! Clean residual mean=0.000002 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0750422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0750422 Jy ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.079 mas, bpa=-2.153 degrees ! Estimated noise=881.771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165088 Jy ! Component: 100 - total flux cleaned = 0.00245237 Jy ! Component: 150 - total flux cleaned = 0.00252267 Jy ! Component: 200 - total flux cleaned = 0.00258588 Jy ! Total flux subtracted in 200 components = 0.00258588 Jy ! Clean residual min=-0.002947 max=0.002270 Jy/beam ! Clean residual mean=0.000003 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0776281 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0776281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.754 mas, bmaj=11.81 mas, bpa=2.675 degrees ! Estimated noise=1037.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503527 Jy ! Component: 100 - total flux cleaned = 0.000559578 Jy ! Component: 150 - total flux cleaned = 0.000587357 Jy ! Component: 200 - total flux cleaned = 0.000595393 Jy ! Total flux subtracted in 200 components = 0.000595393 Jy ! Clean residual min=-0.002366 max=0.002038 Jy/beam ! Clean residual mean=0.000007 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0782235 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.56758e-07 Jy ! Component: 100 - total flux cleaned = 7.96208e-06 Jy ! Component: 150 - total flux cleaned = 1.52106e-05 Jy ! Component: 200 - total flux cleaned = 2.26968e-05 Jy ! Total flux subtracted in 200 components = 2.26968e-05 Jy ! Clean residual min=-0.002356 max=0.002038 Jy/beam ! Clean residual mean=0.000007 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0782462 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.0782462 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.079 mas, bpa=-2.153 degrees ! Estimated noise=881.771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000418114 Jy ! Component: 100 - total flux cleaned = -0.000456764 Jy ! Component: 150 - total flux cleaned = -0.000410248 Jy ! Component: 200 - total flux cleaned = -0.00039523 Jy ! Total flux subtracted in 200 components = -0.00039523 Jy ! Clean residual min=-0.002929 max=0.002229 Jy/beam ! Clean residual mean=0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.077851 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.077851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087702Jy sigma=0.000657 ! Fit after self-cal, rms=0.087702Jy sigma=0.000657 wmodel J1539+0430_S_2017_03_23_pus_map.mod ! Writing 43 model components to file: J1539+0430_S_2017_03_23_pus_map.mod wobs J1539+0430_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1539+0430_S_2017_03_23_pus_uvs.fits wwins J1539+0430_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J1539+0430_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713697 Jy ! Component: 100 - total flux cleaned = -0.000554081 Jy ! Component: 150 - total flux cleaned = -0.000255556 Jy ! Component: 200 - total flux cleaned = -3.94217e-05 Jy ! Component: 250 - total flux cleaned = 0.000239358 Jy ! Component: 300 - total flux cleaned = 0.000475954 Jy ! Component: 350 - total flux cleaned = 0.000674573 Jy ! Component: 400 - total flux cleaned = 0.000869096 Jy ! Component: 450 - total flux cleaned = 0.00102745 Jy ! Component: 500 - total flux cleaned = 0.00121356 Jy ! Component: 550 - total flux cleaned = 0.00130478 Jy ! Component: 600 - total flux cleaned = 0.00130472 Jy ! Component: 650 - total flux cleaned = 0.00136359 Jy ! Component: 700 - total flux cleaned = 0.00147916 Jy ! Component: 750 - total flux cleaned = 0.00153605 Jy ! Component: 800 - total flux cleaned = 0.00159218 Jy ! Component: 850 - total flux cleaned = 0.00164767 Jy ! Component: 900 - total flux cleaned = 0.00183898 Jy ! Component: 950 - total flux cleaned = 0.00194661 Jy ! Component: 1000 - total flux cleaned = 0.00207995 Jy ! Component: 1050 - total flux cleaned = 0.00218494 Jy ! Component: 1100 - total flux cleaned = 0.00226296 Jy ! Component: 1150 - total flux cleaned = 0.00236577 Jy ! Component: 1200 - total flux cleaned = 0.00246703 Jy ! Component: 1250 - total flux cleaned = 0.00249207 Jy ! Component: 1300 - total flux cleaned = 0.00266555 Jy ! Component: 1350 - total flux cleaned = 0.00264048 Jy ! Component: 1400 - total flux cleaned = 0.00266452 Jy ! Component: 1450 - total flux cleaned = 0.00268892 Jy ! Component: 1500 - total flux cleaned = 0.00280712 Jy ! Component: 1550 - total flux cleaned = 0.00276022 Jy ! Component: 1600 - total flux cleaned = 0.0028301 Jy ! Component: 1650 - total flux cleaned = 0.00289934 Jy ! Component: 1700 - total flux cleaned = 0.00292199 Jy ! Component: 1750 - total flux cleaned = 0.00283202 Jy ! Component: 1800 - total flux cleaned = 0.00287692 Jy ! Component: 1850 - total flux cleaned = 0.00285479 Jy ! Component: 1900 - total flux cleaned = 0.00289877 Jy ! Component: 1950 - total flux cleaned = 0.00285534 Jy ! Component: 2000 - total flux cleaned = 0.00281225 Jy ! Component: 2050 - total flux cleaned = 0.00287648 Jy ! Component: 2100 - total flux cleaned = 0.00289719 Jy ! Component: 2150 - total flux cleaned = 0.0028133 Jy ! Component: 2200 - total flux cleaned = 0.00285519 Jy ! Component: 2250 - total flux cleaned = 0.0029172 Jy ! Component: 2300 - total flux cleaned = 0.00289698 Jy ! Component: 2350 - total flux cleaned = 0.00293748 Jy ! Component: 2400 - total flux cleaned = 0.00301839 Jy ! Component: 2450 - total flux cleaned = 0.00305827 Jy ! Component: 2500 - total flux cleaned = 0.00305807 Jy ! Component: 2550 - total flux cleaned = 0.00305833 Jy ! Component: 2600 - total flux cleaned = 0.00303884 Jy ! Component: 2650 - total flux cleaned = 0.00307781 Jy ! Component: 2700 - total flux cleaned = 0.00313535 Jy ! Component: 2750 - total flux cleaned = 0.00303937 Jy ! Component: 2800 - total flux cleaned = 0.00300123 Jy ! Component: 2850 - total flux cleaned = 0.00303914 Jy ! Component: 2900 - total flux cleaned = 0.00303939 Jy ! Component: 2950 - total flux cleaned = 0.00300193 Jy ! Component: 3000 - total flux cleaned = 0.00300203 Jy ! Component: 3050 - total flux cleaned = 0.00309415 Jy ! Component: 3100 - total flux cleaned = 0.00311257 Jy ! Component: 3150 - total flux cleaned = 0.00311263 Jy ! Component: 3200 - total flux cleaned = 0.00309476 Jy ! Component: 3250 - total flux cleaned = 0.00314843 Jy ! Component: 3300 - total flux cleaned = 0.00307715 Jy ! Component: 3350 - total flux cleaned = 0.00311265 Jy ! Component: 3400 - total flux cleaned = 0.00313029 Jy ! Component: 3450 - total flux cleaned = 0.0031302 Jy ! Component: 3500 - total flux cleaned = 0.00316492 Jy ! Component: 3550 - total flux cleaned = 0.00311323 Jy ! Component: 3600 - total flux cleaned = 0.00316462 Jy ! Component: 3650 - total flux cleaned = 0.00318163 Jy ! Component: 3700 - total flux cleaned = 0.00319832 Jy ! Component: 3750 - total flux cleaned = 0.00316462 Jy ! Component: 3800 - total flux cleaned = 0.00319792 Jy ! Component: 3850 - total flux cleaned = 0.00321447 Jy ! Component: 3900 - total flux cleaned = 0.0032144 Jy ! Component: 3950 - total flux cleaned = 0.00323069 Jy ! Component: 4000 - total flux cleaned = 0.00314898 Jy ! Component: 4050 - total flux cleaned = 0.00318144 Jy ! Total flux subtracted in 4096 components = 0.00319746 Jy ! Clean residual min=-0.000871 max=0.000860 Jy/beam ! Clean residual mean=-0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0810484 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 351 components and 0.0810483 Jy ![Exited script file: muppet] wmap "J1539+0430_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 8.079 at -2.153 degrees (North through East) ! Clean map min=-0.0024266 max=0.07052 Jy/beam ! Writing clean map to FITS file: J1539+0430_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0705195 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000296192 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.26004 1.26004 2.52008 5.04017 10.0803 20.1607 40.3214 80.6427 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 8.079 at -2.153 degrees (North through East) ! Clean map min=-0.0024266 max=0.07052 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1539+0430_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:03:02 2019