! Started logfile: J1537+2300_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:22 2019 obs J1537+2300_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1537+2300_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.567982 visibilities/baseline/integration-bin. ! Found source: J1537+2300 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 9324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1537+2300_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 490 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952117Jy sigma=0.008041 ! Fit after self-cal, rms=0.932479Jy sigma=0.007911 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=5.525 mas, bpa=-5.108 degrees ! Estimated noise=1271.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560357 Jy ! Component: 100 - total flux cleaned = 0.0683071 Jy ! Total flux subtracted in 100 components = 0.0683071 Jy ! Clean residual min=-0.003525 max=0.003610 Jy/beam ! Clean residual mean=0.000003 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0683071 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0683071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081828Jy sigma=0.000635 ! Fit after self-cal, rms=0.081691Jy sigma=0.000634 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=5.875 mas, bpa=-2.9 degrees ! Estimated noise=951.508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258077 Jy ! Component: 100 - total flux cleaned = 0.00367882 Jy ! Component: 150 - total flux cleaned = 0.00387268 Jy ! Component: 200 - total flux cleaned = 0.00391349 Jy ! Total flux subtracted in 200 components = 0.00391349 Jy ! Clean residual min=-0.002551 max=0.002637 Jy/beam ! Clean residual mean=0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0722206 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.0722206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081611Jy sigma=0.000633 ! Fit after self-cal, rms=0.081599Jy sigma=0.000633 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.99 LA 1.01 ! MK 0.97 NL 1.00 OV 0.98 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.99 LA 1.01 ! MK 1.04 NL 1.05 OV 1.02 PT 1.02 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.06 LA 1.07 ! MK 0.99 NL 0.99 OV 0.90 PT 0.94 ! SC 0.96 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.94 LA 1.02 ! MK 1.06 NL 1.00* OV 0.92 PT 1.02 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.081599Jy sigma=0.000633 ! Fit after self-cal, rms=0.081383Jy sigma=0.000633 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=5.866 mas, bpa=-2.626 degrees ! Estimated noise=949.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337504 Jy ! Component: 100 - total flux cleaned = 0.000338873 Jy ! Component: 150 - total flux cleaned = 0.000313947 Jy ! Component: 200 - total flux cleaned = 0.000268016 Jy ! Total flux subtracted in 200 components = 0.000268016 Jy ! Clean residual min=-0.002293 max=0.002437 Jy/beam ! Clean residual mean=0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0724886 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.0724886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081376Jy sigma=0.000633 ! Fit after self-cal, rms=0.081402Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081402Jy sigma=0.000633 ! Fit after self-cal, rms=0.083630Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=5.862 mas, bpa=-2.758 degrees ! Estimated noise=951.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195567 Jy ! Component: 100 - total flux cleaned = 0.000159391 Jy ! Component: 150 - total flux cleaned = 0.000142829 Jy ! Component: 200 - total flux cleaned = 0.000128397 Jy ! Total flux subtracted in 200 components = 0.000128397 Jy ! Clean residual min=-0.002440 max=0.002254 Jy/beam ! Clean residual mean=-0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.072617 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.072617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083625Jy sigma=0.000630 ! Fit after self-cal, rms=0.083761Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131799 Jy ! Component: 100 - total flux cleaned = -0.000111559 Jy ! Component: 150 - total flux cleaned = -0.000134435 Jy ! Component: 200 - total flux cleaned = -0.000155326 Jy ! Total flux subtracted in 200 components = -0.000155326 Jy ! Clean residual min=-0.002414 max=0.002210 Jy/beam ! Clean residual mean=-0.000000 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0724617 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0724617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083758Jy sigma=0.000630 ! Fit after self-cal, rms=0.083760Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083760Jy sigma=0.000630 ! Fit after self-cal, rms=0.084504Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=5.859 mas, bpa=-2.829 degrees ! Estimated noise=950.839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.58542e-05 Jy ! Component: 100 - total flux cleaned = 5.6355e-05 Jy ! Component: 150 - total flux cleaned = 4.15361e-05 Jy ! Component: 200 - total flux cleaned = 4.13971e-05 Jy ! Total flux subtracted in 200 components = 4.13971e-05 Jy ! Clean residual min=-0.002443 max=0.002228 Jy/beam ! Clean residual mean=-0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0725031 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0725031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084501Jy sigma=0.000630 ! Fit after self-cal, rms=0.084519Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.71968e-05 Jy ! Component: 100 - total flux cleaned = -4.18263e-05 Jy ! Component: 150 - total flux cleaned = -4.81182e-05 Jy ! Component: 200 - total flux cleaned = -4.79734e-05 Jy ! Total flux subtracted in 200 components = -4.79734e-05 Jy ! Clean residual min=-0.002450 max=0.002182 Jy/beam ! Clean residual mean=-0.000001 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0724551 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0724551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084517Jy sigma=0.000630 ! Fit after self-cal, rms=0.084519Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084519Jy sigma=0.000630 ! Fit after self-cal, rms=0.084626Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.499 mas, bmaj=9.118 mas, bpa=5.364 degrees ! Estimated noise=1292.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.31358e-06 Jy ! Component: 100 - total flux cleaned = 0.000134088 Jy ! Component: 150 - total flux cleaned = 0.000227769 Jy ! Component: 200 - total flux cleaned = 0.00025023 Jy ! Total flux subtracted in 200 components = 0.00025023 Jy ! Clean residual min=-0.002328 max=0.002548 Jy/beam ! Clean residual mean=-0.000002 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0727053 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 41 components and 0.0727053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084626Jy sigma=0.000630 ! Fit after self-cal, rms=0.084627Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.75556e-06 Jy ! Component: 100 - total flux cleaned = 3.10019e-05 Jy ! Component: 150 - total flux cleaned = 5.16629e-05 Jy ! Component: 200 - total flux cleaned = 7.97906e-05 Jy ! Total flux subtracted in 200 components = 7.97906e-05 Jy ! Clean residual min=-0.002342 max=0.002609 Jy/beam ! Clean residual mean=-0.000002 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0727851 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 41 components and 0.0727851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084627Jy sigma=0.000630 ! Fit after self-cal, rms=0.084616Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=5.859 mas, bpa=-2.862 degrees ! Estimated noise=950.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 5.859 at -2.862 degrees (North through East) ! Clean map min=-0.0023548 max=0.070647 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=5.53 mas, bpa=-5.154 degrees ! Estimated noise=1255.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553657 Jy ! Component: 100 - total flux cleaned = 0.0674691 Jy ! Component: 150 - total flux cleaned = 0.0709731 Jy ! Component: 200 - total flux cleaned = 0.0721892 Jy ! Total flux subtracted in 200 components = 0.0721892 Jy ! Clean residual min=-0.003740 max=0.003783 Jy/beam ! Clean residual mean=-0.000001 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.0721892 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0721892 Jy ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=5.859 mas, bpa=-2.862 degrees ! Estimated noise=950.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179701 Jy ! Component: 100 - total flux cleaned = 3.80258e-06 Jy ! Component: 150 - total flux cleaned = 8.85387e-05 Jy ! Component: 200 - total flux cleaned = 0.000169385 Jy ! Total flux subtracted in 200 components = 0.000169385 Jy ! Clean residual min=-0.002502 max=0.002220 Jy/beam ! Clean residual mean=-0.000001 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0723586 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.0723586 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.499 mas, bmaj=9.118 mas, bpa=5.364 degrees ! Estimated noise=1292.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.70656e-05 Jy ! Component: 100 - total flux cleaned = 0.000203026 Jy ! Component: 150 - total flux cleaned = 0.00031097 Jy ! Component: 200 - total flux cleaned = 0.000359828 Jy ! Total flux subtracted in 200 components = 0.000359828 Jy ! Clean residual min=-0.002383 max=0.002623 Jy/beam ! Clean residual mean=-0.000002 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0727184 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18414e-05 Jy ! Component: 100 - total flux cleaned = 3.19301e-05 Jy ! Component: 150 - total flux cleaned = 5.16962e-05 Jy ! Component: 200 - total flux cleaned = 6.0981e-05 Jy ! Total flux subtracted in 200 components = 6.0981e-05 Jy ! Clean residual min=-0.002375 max=0.002630 Jy/beam ! Clean residual mean=-0.000002 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0727794 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.0727794 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=5.859 mas, bpa=-2.862 degrees ! Estimated noise=950.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230034 Jy ! Component: 100 - total flux cleaned = 0.000102221 Jy ! Component: 150 - total flux cleaned = 4.0872e-05 Jy ! Component: 200 - total flux cleaned = -1.29124e-05 Jy ! Total flux subtracted in 200 components = -1.29124e-05 Jy ! Clean residual min=-0.002472 max=0.002165 Jy/beam ! Clean residual mean=-0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0727665 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0727665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084616Jy sigma=0.000630 ! Fit after self-cal, rms=0.084618Jy sigma=0.000630 wmodel J1537+2300_S_2017_01_21_pus_map.mod ! Writing 39 model components to file: J1537+2300_S_2017_01_21_pus_map.mod wobs J1537+2300_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1537+2300_S_2017_01_21_pus_uvs.fits wwins J1537+2300_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1537+2300_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.56536e-05 Jy ! Component: 100 - total flux cleaned = 0.000264237 Jy ! Component: 150 - total flux cleaned = 0.000475819 Jy ! Component: 200 - total flux cleaned = 0.000508662 Jy ! Component: 250 - total flux cleaned = 0.000508089 Jy ! Component: 300 - total flux cleaned = 0.000569744 Jy ! Component: 350 - total flux cleaned = 0.000777856 Jy ! Component: 400 - total flux cleaned = 0.000806211 Jy ! Component: 450 - total flux cleaned = 0.000862393 Jy ! Component: 500 - total flux cleaned = 0.000917171 Jy ! Component: 550 - total flux cleaned = 0.00107694 Jy ! Component: 600 - total flux cleaned = 0.000972107 Jy ! Component: 650 - total flux cleaned = 0.00102343 Jy ! Component: 700 - total flux cleaned = 0.00104856 Jy ! Component: 750 - total flux cleaned = 0.00109682 Jy ! Component: 800 - total flux cleaned = 0.00109655 Jy ! Component: 850 - total flux cleaned = 0.00114385 Jy ! Component: 900 - total flux cleaned = 0.00121264 Jy ! Component: 950 - total flux cleaned = 0.00119003 Jy ! Component: 1000 - total flux cleaned = 0.00125672 Jy ! Component: 1050 - total flux cleaned = 0.00125667 Jy ! Component: 1100 - total flux cleaned = 0.00127858 Jy ! Component: 1150 - total flux cleaned = 0.00132109 Jy ! Component: 1200 - total flux cleaned = 0.00127969 Jy ! Component: 1250 - total flux cleaned = 0.0013202 Jy ! Component: 1300 - total flux cleaned = 0.00127984 Jy ! Component: 1350 - total flux cleaned = 0.00122066 Jy ! Component: 1400 - total flux cleaned = 0.00120113 Jy ! Component: 1450 - total flux cleaned = 0.00123949 Jy ! Component: 1500 - total flux cleaned = 0.0011448 Jy ! Component: 1550 - total flux cleaned = 0.00112627 Jy ! Component: 1600 - total flux cleaned = 0.00120038 Jy ! Component: 1650 - total flux cleaned = 0.00123658 Jy ! Component: 1700 - total flux cleaned = 0.00118286 Jy ! Component: 1750 - total flux cleaned = 0.00118274 Jy ! Component: 1800 - total flux cleaned = 0.00125275 Jy ! Component: 1850 - total flux cleaned = 0.0012178 Jy ! Component: 1900 - total flux cleaned = 0.00118361 Jy ! Component: 1950 - total flux cleaned = 0.00121748 Jy ! Component: 2000 - total flux cleaned = 0.00125086 Jy ! Component: 2050 - total flux cleaned = 0.00125067 Jy ! Component: 2100 - total flux cleaned = 0.00125088 Jy ! Component: 2150 - total flux cleaned = 0.00125094 Jy ! Component: 2200 - total flux cleaned = 0.00123516 Jy ! Component: 2250 - total flux cleaned = 0.00123502 Jy ! Component: 2300 - total flux cleaned = 0.00118821 Jy ! Component: 2350 - total flux cleaned = 0.00121927 Jy ! Component: 2400 - total flux cleaned = 0.00121935 Jy ! Component: 2450 - total flux cleaned = 0.00124985 Jy ! Component: 2500 - total flux cleaned = 0.00127946 Jy ! Component: 2550 - total flux cleaned = 0.00126443 Jy ! Component: 2600 - total flux cleaned = 0.00126438 Jy ! Component: 2650 - total flux cleaned = 0.00126452 Jy ! Component: 2700 - total flux cleaned = 0.00125018 Jy ! Component: 2750 - total flux cleaned = 0.00130729 Jy ! Component: 2800 - total flux cleaned = 0.00126495 Jy ! Component: 2850 - total flux cleaned = 0.00132122 Jy ! Component: 2900 - total flux cleaned = 0.00130747 Jy ! Component: 2950 - total flux cleaned = 0.00126611 Jy ! Component: 3000 - total flux cleaned = 0.00132065 Jy ! Component: 3050 - total flux cleaned = 0.00126654 Jy ! Component: 3100 - total flux cleaned = 0.00129358 Jy ! Component: 3150 - total flux cleaned = 0.00124046 Jy ! Component: 3200 - total flux cleaned = 0.00118776 Jy ! Component: 3250 - total flux cleaned = 0.00121392 Jy ! Component: 3300 - total flux cleaned = 0.00120089 Jy ! Component: 3350 - total flux cleaned = 0.00122652 Jy ! Component: 3400 - total flux cleaned = 0.00121392 Jy ! Component: 3450 - total flux cleaned = 0.00120142 Jy ! Component: 3500 - total flux cleaned = 0.00125167 Jy ! Component: 3550 - total flux cleaned = 0.00130161 Jy ! Component: 3600 - total flux cleaned = 0.00133893 Jy ! Component: 3650 - total flux cleaned = 0.00133901 Jy ! Component: 3700 - total flux cleaned = 0.00138782 Jy ! Component: 3750 - total flux cleaned = 0.00142418 Jy ! Component: 3800 - total flux cleaned = 0.0014722 Jy ! Component: 3850 - total flux cleaned = 0.00150791 Jy ! Component: 3900 - total flux cleaned = 0.00159104 Jy ! Component: 3950 - total flux cleaned = 0.00153218 Jy ! Component: 4000 - total flux cleaned = 0.00155574 Jy ! Component: 4050 - total flux cleaned = 0.0016489 Jy ! Total flux subtracted in 4096 components = 0.00162581 Jy ! Clean residual min=-0.000666 max=0.000661 Jy/beam ! Clean residual mean=-0.000001 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.0743923 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 337 components and 0.0743923 Jy ![Exited script file: muppet] wmap "J1537+2300_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 5.859 at -2.862 degrees (North through East) ! Clean map min=-0.0019188 max=0.070525 Jy/beam ! Writing clean map to FITS file: J1537+2300_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0705251 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200688 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.853689 0.853689 1.70738 3.41476 6.82951 13.659 27.318 54.6361 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 5.859 at -2.862 degrees (North through East) ! Clean map min=-0.0019188 max=0.070525 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1537+2300_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:27 2019