! Started logfile: J1535+1954_S_2017_08_12_pus_uvs.log on Fri May 10 15:02:37 2019 obs J1535+1954_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1535+1954_S_2017_08_12_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772515 visibilities/baseline/integration-bin. ! Found source: J1535+1954 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 15852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1535+1954_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 791 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938297Jy sigma=0.008795 ! Fit after self-cal, rms=0.926948Jy sigma=0.008709 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=6.376 mas, bpa=-4.213 degrees ! Estimated noise=1110.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589928 Jy ! Component: 100 - total flux cleaned = 0.0719028 Jy ! Total flux subtracted in 100 components = 0.0719028 Jy ! Clean residual min=-0.003383 max=0.003872 Jy/beam ! Clean residual mean=-0.000002 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0719028 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0719028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076904Jy sigma=0.000667 ! Fit after self-cal, rms=0.076891Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=6.952 mas, bpa=-3.347 degrees ! Estimated noise=709.463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419701 Jy ! Component: 100 - total flux cleaned = 0.00598447 Jy ! Component: 150 - total flux cleaned = 0.00648815 Jy ! Component: 200 - total flux cleaned = 0.00651528 Jy ! Total flux subtracted in 200 components = 0.00651528 Jy ! Clean residual min=-0.002119 max=0.001985 Jy/beam ! Clean residual mean=-0.000000 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.078418 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.0784181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076677Jy sigma=0.000665 ! Fit after self-cal, rms=0.076679Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 0.95 KP 1.06 ! LA 1.02 MK 1.02 NL 0.86 OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 1.00 KP 1.01 ! LA 0.96 MK 1.07 NL 1.03 OV 1.02 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 KP 1.00 ! LA 0.98 MK 1.06 NL 1.02 OV 0.96 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.04 KP 1.00* ! LA 0.82 MK 0.87 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.076679Jy sigma=0.000665 ! Fit after self-cal, rms=0.076580Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=7.013 mas, bpa=-2.314 degrees ! Estimated noise=712.952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000583294 Jy ! Component: 100 - total flux cleaned = -0.000671182 Jy ! Component: 150 - total flux cleaned = -0.000693915 Jy ! Component: 200 - total flux cleaned = -0.000713515 Jy ! Total flux subtracted in 200 components = -0.000713515 Jy ! Clean residual min=-0.002200 max=0.001842 Jy/beam ! Clean residual mean=-0.000001 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0777045 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.0777045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076573Jy sigma=0.000666 ! Fit after self-cal, rms=0.076578Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076578Jy sigma=0.000666 ! Fit after self-cal, rms=0.077828Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=7.005 mas, bpa=-2.144 degrees ! Estimated noise=715.199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274411 Jy ! Component: 100 - total flux cleaned = 0.000262815 Jy ! Component: 150 - total flux cleaned = 0.000272943 Jy ! Component: 200 - total flux cleaned = 0.000263985 Jy ! Total flux subtracted in 200 components = 0.000263985 Jy ! Clean residual min=-0.002007 max=0.001644 Jy/beam ! Clean residual mean=-0.000004 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0779685 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0779685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077824Jy sigma=0.000664 ! Fit after self-cal, rms=0.077858Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3394e-05 Jy ! Component: 100 - total flux cleaned = 7.59814e-06 Jy ! Component: 150 - total flux cleaned = -1.4332e-05 Jy ! Component: 200 - total flux cleaned = -3.42257e-05 Jy ! Total flux subtracted in 200 components = -3.42257e-05 Jy ! Clean residual min=-0.002007 max=0.001645 Jy/beam ! Clean residual mean=-0.000004 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0779343 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0779343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077856Jy sigma=0.000664 ! Fit after self-cal, rms=0.077856Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077856Jy sigma=0.000664 ! Fit after self-cal, rms=0.078233Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=6.992 mas, bpa=-2.119 degrees ! Estimated noise=714.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.97512e-05 Jy ! Component: 100 - total flux cleaned = 7.75222e-05 Jy ! Component: 150 - total flux cleaned = 5.78702e-05 Jy ! Component: 200 - total flux cleaned = 4.60507e-05 Jy ! Total flux subtracted in 200 components = 4.60507e-05 Jy ! Clean residual min=-0.001921 max=0.001604 Jy/beam ! Clean residual mean=-0.000004 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0779804 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0779803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078231Jy sigma=0.000664 ! Fit after self-cal, rms=0.078243Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.78199e-05 Jy ! Component: 100 - total flux cleaned = 9.62862e-06 Jy ! Component: 150 - total flux cleaned = -6.40465e-06 Jy ! Component: 200 - total flux cleaned = -1.6095e-05 Jy ! Total flux subtracted in 200 components = -1.6095e-05 Jy ! Clean residual min=-0.001920 max=0.001602 Jy/beam ! Clean residual mean=-0.000004 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0779642 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.0779642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078241Jy sigma=0.000664 ! Fit after self-cal, rms=0.078241Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078241Jy sigma=0.000664 ! Fit after self-cal, rms=0.078332Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.932 mas, bmaj=10.82 mas, bpa=-7.701 degrees ! Estimated noise=919.807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170768 Jy ! Component: 100 - total flux cleaned = 0.000172232 Jy ! Component: 150 - total flux cleaned = 0.000199093 Jy ! Component: 200 - total flux cleaned = 0.000223663 Jy ! Total flux subtracted in 200 components = 0.000223663 Jy ! Clean residual min=-0.001969 max=0.001537 Jy/beam ! Clean residual mean=-0.000010 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0781879 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0781879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078333Jy sigma=0.000664 ! Fit after self-cal, rms=0.078334Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62683e-05 Jy ! Component: 100 - total flux cleaned = 1.65001e-05 Jy ! Component: 150 - total flux cleaned = 1.68368e-05 Jy ! Component: 200 - total flux cleaned = 2.42503e-05 Jy ! Total flux subtracted in 200 components = 2.42503e-05 Jy ! Clean residual min=-0.001964 max=0.001535 Jy/beam ! Clean residual mean=-0.000010 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0782122 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.0782121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078335Jy sigma=0.000664 ! Fit after self-cal, rms=0.078335Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=6.986 mas, bpa=-2.104 degrees ! Estimated noise=715.051 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 6.986 at -2.104 degrees (North through East) ! Clean map min=-0.001834 max=0.075945 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=6.402 mas, bpa=-2.787 degrees ! Estimated noise=1081.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592095 Jy ! Component: 100 - total flux cleaned = 0.0723239 Jy ! Component: 150 - total flux cleaned = 0.0761329 Jy ! Component: 200 - total flux cleaned = 0.0780112 Jy ! Total flux subtracted in 200 components = 0.0780112 Jy ! Clean residual min=-0.002860 max=0.002840 Jy/beam ! Clean residual mean=-0.000002 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.0780112 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0780112 Jy ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=6.986 mas, bpa=-2.104 degrees ! Estimated noise=715.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621732 Jy ! Component: 100 - total flux cleaned = 0.000623446 Jy ! Component: 150 - total flux cleaned = 0.000624892 Jy ! Component: 200 - total flux cleaned = 0.000625583 Jy ! Total flux subtracted in 200 components = 0.000625583 Jy ! Clean residual min=-0.001950 max=0.001658 Jy/beam ! Clean residual mean=-0.000004 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0786368 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0786368 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.932 mas, bmaj=10.82 mas, bpa=-7.701 degrees ! Estimated noise=919.807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222668 Jy ! Component: 100 - total flux cleaned = -0.00025777 Jy ! Component: 150 - total flux cleaned = -0.000257385 Jy ! Component: 200 - total flux cleaned = -0.000257285 Jy ! Total flux subtracted in 200 components = -0.000257285 Jy ! Clean residual min=-0.001983 max=0.001537 Jy/beam ! Clean residual mean=-0.000010 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0783795 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.65928e-06 Jy ! Component: 100 - total flux cleaned = -9.97269e-06 Jy ! Component: 150 - total flux cleaned = -1.9282e-05 Jy ! Component: 200 - total flux cleaned = -2.79655e-05 Jy ! Total flux subtracted in 200 components = -2.79655e-05 Jy ! Clean residual min=-0.001979 max=0.001533 Jy/beam ! Clean residual mean=-0.000010 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0783515 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0783515 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=6.986 mas, bpa=-2.104 degrees ! Estimated noise=715.051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.3096e-05 Jy ! Component: 100 - total flux cleaned = 7.40377e-05 Jy ! Component: 150 - total flux cleaned = 4.0968e-05 Jy ! Component: 200 - total flux cleaned = 4.14081e-05 Jy ! Total flux subtracted in 200 components = 4.14081e-05 Jy ! Clean residual min=-0.001922 max=0.001613 Jy/beam ! Clean residual mean=-0.000004 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0783929 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.0783929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078342Jy sigma=0.000664 ! Fit after self-cal, rms=0.078342Jy sigma=0.000664 wmodel J1535+1954_S_2017_08_12_pus_map.mod ! Writing 40 model components to file: J1535+1954_S_2017_08_12_pus_map.mod wobs J1535+1954_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1535+1954_S_2017_08_12_pus_uvs.fits wwins J1535+1954_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1535+1954_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058739 Jy ! Component: 100 - total flux cleaned = -0.000826148 Jy ! Component: 150 - total flux cleaned = -0.00116858 Jy ! Component: 200 - total flux cleaned = -0.0012789 Jy ! Component: 250 - total flux cleaned = -0.00143842 Jy ! Component: 300 - total flux cleaned = -0.00154149 Jy ! Component: 350 - total flux cleaned = -0.00161715 Jy ! Component: 400 - total flux cleaned = -0.00171491 Jy ! Component: 450 - total flux cleaned = -0.00173822 Jy ! Component: 500 - total flux cleaned = -0.00166803 Jy ! Component: 550 - total flux cleaned = -0.00164555 Jy ! Component: 600 - total flux cleaned = -0.00162269 Jy ! Component: 650 - total flux cleaned = -0.00155631 Jy ! Component: 700 - total flux cleaned = -0.00151302 Jy ! Component: 750 - total flux cleaned = -0.00142811 Jy ! Component: 800 - total flux cleaned = -0.00147003 Jy ! Component: 850 - total flux cleaned = -0.00134683 Jy ! Component: 900 - total flux cleaned = -0.0013673 Jy ! Component: 950 - total flux cleaned = -0.00130748 Jy ! Component: 1000 - total flux cleaned = -0.001268 Jy ! Component: 1050 - total flux cleaned = -0.00120963 Jy ! Component: 1100 - total flux cleaned = -0.00111377 Jy ! Component: 1150 - total flux cleaned = -0.00107635 Jy ! Component: 1200 - total flux cleaned = -0.00100209 Jy ! Component: 1250 - total flux cleaned = -0.00100241 Jy ! Component: 1300 - total flux cleaned = -0.000966039 Jy ! Component: 1350 - total flux cleaned = -0.000858931 Jy ! Component: 1400 - total flux cleaned = -0.000823833 Jy ! Component: 1450 - total flux cleaned = -0.000788732 Jy ! Component: 1500 - total flux cleaned = -0.000719574 Jy ! Component: 1550 - total flux cleaned = -0.000651433 Jy ! Component: 1600 - total flux cleaned = -0.000617702 Jy ! Component: 1650 - total flux cleaned = -0.000567646 Jy ! Component: 1700 - total flux cleaned = -0.000517739 Jy ! Component: 1750 - total flux cleaned = -0.000419658 Jy ! Component: 1800 - total flux cleaned = -0.000387137 Jy ! Component: 1850 - total flux cleaned = -0.000371096 Jy ! Component: 1900 - total flux cleaned = -0.000275623 Jy ! Component: 1950 - total flux cleaned = -0.000212385 Jy ! Component: 2000 - total flux cleaned = -0.000118662 Jy ! Component: 2050 - total flux cleaned = -0.000102976 Jy ! Component: 2100 - total flux cleaned = -5.70119e-05 Jy ! Component: 2150 - total flux cleaned = -1.14064e-05 Jy ! Component: 2200 - total flux cleaned = 6.39541e-05 Jy ! Component: 2250 - total flux cleaned = 7.8748e-05 Jy ! Component: 2300 - total flux cleaned = 9.34717e-05 Jy ! Component: 2350 - total flux cleaned = 0.000152329 Jy ! Component: 2400 - total flux cleaned = 0.000196046 Jy ! Component: 2450 - total flux cleaned = 0.000239497 Jy ! Component: 2500 - total flux cleaned = 0.000397369 Jy ! Component: 2550 - total flux cleaned = 0.000425765 Jy ! Component: 2600 - total flux cleaned = 0.000496483 Jy ! Component: 2650 - total flux cleaned = 0.000552423 Jy ! Component: 2700 - total flux cleaned = 0.00060819 Jy ! Component: 2750 - total flux cleaned = 0.0006497 Jy ! Component: 2800 - total flux cleaned = 0.000745827 Jy ! Component: 2850 - total flux cleaned = 0.000800225 Jy ! Component: 2900 - total flux cleaned = 0.000813872 Jy ! Component: 2950 - total flux cleaned = 0.00088105 Jy ! Component: 3000 - total flux cleaned = 0.000907634 Jy ! Component: 3050 - total flux cleaned = 0.000986888 Jy ! Component: 3100 - total flux cleaned = 0.00101323 Jy ! Component: 3150 - total flux cleaned = 0.00103935 Jy ! Component: 3200 - total flux cleaned = 0.00110427 Jy ! Component: 3250 - total flux cleaned = 0.00115572 Jy ! Component: 3300 - total flux cleaned = 0.00116849 Jy ! Component: 3350 - total flux cleaned = 0.00119385 Jy ! Component: 3400 - total flux cleaned = 0.00124443 Jy ! Component: 3450 - total flux cleaned = 0.00129466 Jy ! Component: 3500 - total flux cleaned = 0.0013071 Jy ! Component: 3550 - total flux cleaned = 0.00133193 Jy ! Component: 3600 - total flux cleaned = 0.00135656 Jy ! Component: 3650 - total flux cleaned = 0.00139332 Jy ! Component: 3700 - total flux cleaned = 0.00147844 Jy ! Component: 3750 - total flux cleaned = 0.00149037 Jy ! Component: 3800 - total flux cleaned = 0.00152644 Jy ! Component: 3850 - total flux cleaned = 0.001574 Jy ! Component: 3900 - total flux cleaned = 0.00157405 Jy ! Component: 3950 - total flux cleaned = 0.00163305 Jy ! Component: 4000 - total flux cleaned = 0.0017033 Jy ! Component: 4050 - total flux cleaned = 0.00169168 Jy ! Total flux subtracted in 4096 components = 0.00178425 Jy ! Clean residual min=-0.000610 max=0.000629 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.0801772 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 336 components and 0.0801771 Jy ![Exited script file: muppet] wmap "J1535+1954_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 6.986 at -2.104 degrees (North through East) ! Clean map min=-0.0015181 max=0.075832 Jy/beam ! Writing clean map to FITS file: J1535+1954_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0758317 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209739 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.829754 0.829754 1.65951 3.31902 6.63803 13.2761 26.5521 53.1042 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 6.986 at -2.104 degrees (North through East) ! Clean map min=-0.0015181 max=0.075832 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1535+1954_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:02:42 2019