! Started logfile: J1534-3805_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:20 2019 obs J1534-3805_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1534-3805_S_2017_10_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.566764 visibilities/baseline/integration-bin. ! Found source: J1534-3805 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 9304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1534-3805_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 404 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 334 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 634 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921366Jy sigma=0.005963 ! Fit after self-cal, rms=0.890335Jy sigma=0.005766 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=28.96 mas, bpa=-17.52 degrees ! Estimated noise=2353.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0803578 Jy ! Component: 100 - total flux cleaned = 0.104893 Jy ! Total flux subtracted in 100 components = 0.104893 Jy ! Clean residual min=-0.009009 max=0.011281 Jy/beam ! Clean residual mean=-0.000169 rms=0.002989 Jy/beam ! Combined flux in latest and established models = 0.104893 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.104893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122272Jy sigma=0.000731 ! Fit after self-cal, rms=0.122078Jy sigma=0.000730 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.238 mas, bmaj=33.92 mas, bpa=-18.02 degrees ! Estimated noise=1435.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170058 Jy ! Component: 100 - total flux cleaned = 0.0245997 Jy ! Component: 150 - total flux cleaned = 0.029014 Jy ! Component: 200 - total flux cleaned = 0.031757 Jy ! Total flux subtracted in 200 components = 0.031757 Jy ! Clean residual min=-0.005724 max=0.005765 Jy/beam ! Clean residual mean=0.000001 rms=0.001909 Jy/beam ! Combined flux in latest and established models = 0.13665 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 101 components and 0.13665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119582Jy sigma=0.000716 ! Fit after self-cal, rms=0.119599Jy sigma=0.000715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.15 ! LA 1.04 MK 0.97 NL 1.00* OV 1.02 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.10 ! LA 0.98 MK 1.01 NL 1.00 OV 1.02 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.79 FD 1.00 HN 1.00* KP 1.13 ! LA 0.78 MK 1.09 NL 1.14 OV 0.88 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.00* ! LA 0.91 MK 1.03 NL 1.00* OV 1.00* ! PT 0.90 ! ! ! Fit before self-cal, rms=0.119599Jy sigma=0.000715 ! Fit after self-cal, rms=0.122486Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.214 mas, bmaj=35.08 mas, bpa=-18.04 degrees ! Estimated noise=1471.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000758335 Jy ! Component: 100 - total flux cleaned = -0.00103344 Jy ! Component: 150 - total flux cleaned = -0.00117152 Jy ! Component: 200 - total flux cleaned = -0.00121138 Jy ! Total flux subtracted in 200 components = -0.00121138 Jy ! Clean residual min=-0.004078 max=0.003931 Jy/beam ! Clean residual mean=0.000033 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.135439 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.135439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122444Jy sigma=0.000708 ! Fit after self-cal, rms=0.122727Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122727Jy sigma=0.000707 ! Fit after self-cal, rms=0.125420Jy sigma=0.000706 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.222 mas, bmaj=35.23 mas, bpa=-18.06 degrees ! Estimated noise=1470.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524595 Jy ! Component: 100 - total flux cleaned = -0.000658429 Jy ! Component: 150 - total flux cleaned = -0.000735247 Jy ! Component: 200 - total flux cleaned = -0.000804365 Jy ! Total flux subtracted in 200 components = -0.000804365 Jy ! Clean residual min=-0.003688 max=0.003883 Jy/beam ! Clean residual mean=0.000023 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.134635 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 139 components and 0.134635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125392Jy sigma=0.000706 ! Fit after self-cal, rms=0.125475Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.62333e-05 Jy ! Component: 100 - total flux cleaned = -8.22846e-05 Jy ! Component: 150 - total flux cleaned = -0.00018176 Jy ! Component: 200 - total flux cleaned = -0.000181561 Jy ! Total flux subtracted in 200 components = -0.000181561 Jy ! Clean residual min=-0.003744 max=0.003850 Jy/beam ! Clean residual mean=0.000021 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.134453 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 144 components and 0.134453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125454Jy sigma=0.000706 ! Fit after self-cal, rms=0.125458Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125458Jy sigma=0.000706 ! Fit after self-cal, rms=0.126297Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=35.37 mas, bpa=-18.07 degrees ! Estimated noise=1471.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000476569 Jy ! Component: 100 - total flux cleaned = -0.000621566 Jy ! Component: 150 - total flux cleaned = -0.000682639 Jy ! Component: 200 - total flux cleaned = -0.00068269 Jy ! Total flux subtracted in 200 components = -0.00068269 Jy ! Clean residual min=-0.003654 max=0.003746 Jy/beam ! Clean residual mean=0.000016 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.13377 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 150 components and 0.13377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126277Jy sigma=0.000706 ! Fit after self-cal, rms=0.126302Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23364e-05 Jy ! Component: 100 - total flux cleaned = -7.88641e-05 Jy ! Component: 150 - total flux cleaned = -0.000135328 Jy ! Component: 200 - total flux cleaned = -0.000136159 Jy ! Total flux subtracted in 200 components = -0.000136159 Jy ! Clean residual min=-0.003681 max=0.003714 Jy/beam ! Clean residual mean=0.000016 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.133634 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 153 components and 0.133634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126286Jy sigma=0.000706 ! Fit after self-cal, rms=0.126291Jy sigma=0.000706 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126291Jy sigma=0.000706 ! Fit after self-cal, rms=0.126448Jy sigma=0.000705 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.13 mas, bmaj=45.94 mas, bpa=-8.114 degrees ! Estimated noise=1623.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258179 Jy ! Component: 100 - total flux cleaned = -0.000341509 Jy ! Component: 150 - total flux cleaned = -0.000429413 Jy ! Component: 200 - total flux cleaned = -0.000488033 Jy ! Total flux subtracted in 200 components = -0.000488033 Jy ! Clean residual min=-0.004038 max=0.003234 Jy/beam ! Clean residual mean=0.000019 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.133146 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 170 components and 0.133146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126441Jy sigma=0.000705 ! Fit after self-cal, rms=0.126447Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.4664e-05 Jy ! Component: 100 - total flux cleaned = -8.51194e-05 Jy ! Component: 150 - total flux cleaned = -0.000156856 Jy ! Component: 200 - total flux cleaned = -0.000204872 Jy ! Total flux subtracted in 200 components = -0.000204872 Jy ! Clean residual min=-0.004044 max=0.003231 Jy/beam ! Clean residual mean=0.000017 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.132941 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 179 components and 0.132941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126442Jy sigma=0.000705 ! Fit after self-cal, rms=0.126446Jy sigma=0.000705 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=35.47 mas, bpa=-18.07 degrees ! Estimated noise=1472.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 35.47 at -18.07 degrees (North through East) ! Clean map min=-0.0036473 max=0.1073 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=31.57 mas, bpa=-17.57 degrees ! Estimated noise=2508.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840719 Jy ! Component: 100 - total flux cleaned = 0.110477 Jy ! Component: 150 - total flux cleaned = 0.123178 Jy ! Component: 200 - total flux cleaned = 0.12921 Jy ! Total flux subtracted in 200 components = 0.12921 Jy ! Clean residual min=-0.007641 max=0.006967 Jy/beam ! Clean residual mean=-0.000050 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 0.12921 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.12921 Jy ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=35.47 mas, bpa=-18.07 degrees ! Estimated noise=1472.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034608 Jy ! Component: 100 - total flux cleaned = 0.00345558 Jy ! Component: 150 - total flux cleaned = 0.00345633 Jy ! Component: 200 - total flux cleaned = 0.00345722 Jy ! Total flux subtracted in 200 components = 0.00345722 Jy ! Clean residual min=-0.003813 max=0.003566 Jy/beam ! Clean residual mean=0.000014 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.132667 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 77 components and 0.132667 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.13 mas, bmaj=45.94 mas, bpa=-8.114 degrees ! Estimated noise=1623.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443436 Jy ! Component: 100 - total flux cleaned = 0.000446088 Jy ! Component: 150 - total flux cleaned = 0.000391676 Jy ! Component: 200 - total flux cleaned = 0.000292592 Jy ! Total flux subtracted in 200 components = 0.000292592 Jy ! Clean residual min=-0.004059 max=0.003319 Jy/beam ! Clean residual mean=0.000019 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.132959 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.47385e-05 Jy ! Component: 100 - total flux cleaned = -8.85865e-05 Jy ! Component: 150 - total flux cleaned = -0.000129485 Jy ! Component: 200 - total flux cleaned = -0.000167422 Jy ! Total flux subtracted in 200 components = -0.000167422 Jy ! Clean residual min=-0.004039 max=0.003303 Jy/beam ! Clean residual mean=0.000017 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.132792 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 116 components and 0.132792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.235 mas, bmaj=35.47 mas, bpa=-18.07 degrees ! Estimated noise=1472.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028574 Jy ! Component: 100 - total flux cleaned = -0.000341803 Jy ! Component: 150 - total flux cleaned = -0.000435885 Jy ! Component: 200 - total flux cleaned = -0.000475428 Jy ! Total flux subtracted in 200 components = -0.000475428 Jy ! Clean residual min=-0.003657 max=0.003651 Jy/beam ! Clean residual mean=0.000009 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.132317 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 129 components and 0.132317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126479Jy sigma=0.000706 ! Fit after self-cal, rms=0.126462Jy sigma=0.000706 wmodel J1534-3805_S_2017_10_21_pus_map.mod ! Writing 129 model components to file: J1534-3805_S_2017_10_21_pus_map.mod wobs J1534-3805_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1534-3805_S_2017_10_21_pus_uvs.fits wwins J1534-3805_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1534-3805_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217642 Jy ! Component: 100 - total flux cleaned = -9.99809e-05 Jy ! Component: 150 - total flux cleaned = 0.000149815 Jy ! Component: 200 - total flux cleaned = 0.00028782 Jy ! Component: 250 - total flux cleaned = 0.000332749 Jy ! Component: 300 - total flux cleaned = 0.000334006 Jy ! Component: 350 - total flux cleaned = 0.000373568 Jy ! Component: 400 - total flux cleaned = 0.000411498 Jy ! Component: 450 - total flux cleaned = 0.000484604 Jy ! Component: 500 - total flux cleaned = 0.000342794 Jy ! Component: 550 - total flux cleaned = 0.000241649 Jy ! Component: 600 - total flux cleaned = 0.000143073 Jy ! Component: 650 - total flux cleaned = 4.82202e-05 Jy ! Component: 700 - total flux cleaned = -7.46197e-05 Jy ! Component: 750 - total flux cleaned = -0.000165086 Jy ! Component: 800 - total flux cleaned = -0.000223611 Jy ! Component: 850 - total flux cleaned = -0.000337282 Jy ! Component: 900 - total flux cleaned = -0.000419875 Jy ! Component: 950 - total flux cleaned = -0.000500913 Jy ! Component: 1000 - total flux cleaned = -0.000606311 Jy ! Component: 1050 - total flux cleaned = -0.000657854 Jy ! Component: 1100 - total flux cleaned = -0.000758188 Jy ! Component: 1150 - total flux cleaned = -0.000782656 Jy ! Component: 1200 - total flux cleaned = -0.000830705 Jy ! Component: 1250 - total flux cleaned = -0.000924109 Jy ! Component: 1300 - total flux cleaned = -0.000969704 Jy ! Component: 1350 - total flux cleaned = -0.00108133 Jy ! Component: 1400 - total flux cleaned = -0.00116919 Jy ! Component: 1450 - total flux cleaned = -0.00129859 Jy ! Component: 1500 - total flux cleaned = -0.00142555 Jy ! Component: 1550 - total flux cleaned = -0.00152946 Jy ! Component: 1600 - total flux cleaned = -0.00169243 Jy ! Component: 1650 - total flux cleaned = -0.00179241 Jy ! Component: 1700 - total flux cleaned = -0.00192989 Jy ! Component: 1750 - total flux cleaned = -0.00202648 Jy ! Component: 1800 - total flux cleaned = -0.00212197 Jy ! Component: 1850 - total flux cleaned = -0.00223459 Jy ! Component: 1900 - total flux cleaned = -0.00229026 Jy ! Component: 1950 - total flux cleaned = -0.00240016 Jy ! Component: 2000 - total flux cleaned = -0.0024902 Jy ! Component: 2050 - total flux cleaned = -0.00257924 Jy ! Component: 2100 - total flux cleaned = -0.00266726 Jy ! Component: 2150 - total flux cleaned = -0.00278878 Jy ! Component: 2200 - total flux cleaned = -0.00282306 Jy ! Component: 2250 - total flux cleaned = -0.00287396 Jy ! Component: 2300 - total flux cleaned = -0.00295787 Jy ! Component: 2350 - total flux cleaned = -0.00304076 Jy ! Component: 2400 - total flux cleaned = -0.0031065 Jy ! Component: 2450 - total flux cleaned = -0.00318765 Jy ! Component: 2500 - total flux cleaned = -0.00328426 Jy ! Component: 2550 - total flux cleaned = -0.00333218 Jy ! Component: 2600 - total flux cleaned = -0.00333212 Jy ! Component: 2650 - total flux cleaned = -0.003348 Jy ! Component: 2700 - total flux cleaned = -0.00337945 Jy ! Component: 2750 - total flux cleaned = -0.00341082 Jy ! Component: 2800 - total flux cleaned = -0.0034108 Jy ! Component: 2850 - total flux cleaned = -0.00345747 Jy ! Component: 2900 - total flux cleaned = -0.00348833 Jy ! Component: 2950 - total flux cleaned = -0.00348833 Jy ! Component: 3000 - total flux cleaned = -0.00348838 Jy ! Component: 3050 - total flux cleaned = -0.00351904 Jy ! Component: 3100 - total flux cleaned = -0.00353424 Jy ! Component: 3150 - total flux cleaned = -0.00359508 Jy ! Component: 3200 - total flux cleaned = -0.00359504 Jy ! Component: 3250 - total flux cleaned = -0.00357987 Jy ! Component: 3300 - total flux cleaned = -0.00361007 Jy ! Component: 3350 - total flux cleaned = -0.00359487 Jy ! Component: 3400 - total flux cleaned = -0.00365512 Jy ! Component: 3450 - total flux cleaned = -0.00365509 Jy ! Component: 3500 - total flux cleaned = -0.0036702 Jy ! Component: 3550 - total flux cleaned = -0.0036551 Jy ! Component: 3600 - total flux cleaned = -0.00365508 Jy ! Component: 3650 - total flux cleaned = -0.00362481 Jy ! Component: 3700 - total flux cleaned = -0.00363994 Jy ! Component: 3750 - total flux cleaned = -0.00365515 Jy ! Component: 3800 - total flux cleaned = -0.00362473 Jy ! Component: 3850 - total flux cleaned = -0.00364002 Jy ! Component: 3900 - total flux cleaned = -0.00367068 Jy ! Component: 3950 - total flux cleaned = -0.00365522 Jy ! Component: 4000 - total flux cleaned = -0.00365522 Jy ! Component: 4050 - total flux cleaned = -0.00365523 Jy ! Total flux subtracted in 4096 components = -0.00368622 Jy ! Clean residual min=-0.000869 max=0.000914 Jy/beam ! Clean residual mean=0.000002 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.12863 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 387 components and 0.12863 Jy ![Exited script file: muppet] wmap "J1534-3805_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 35.47 at -18.07 degrees (North through East) ! Clean map min=-0.0030777 max=0.10635 Jy/beam ! Writing clean map to FITS file: J1534-3805_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106346 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000334993 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.945006 0.945006 1.89001 3.78002 7.56005 15.1201 30.2402 60.4804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.235 x 35.47 at -18.07 degrees (North through East) ! Clean map min=-0.0030777 max=0.10635 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1534-3805_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:25 2019