! Started logfile: J1534-2218_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:17 2019 obs J1534-2218_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1534-2218_S_2017_01_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666425 visibilities/baseline/integration-bin. ! Found source: J1534-2218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11036 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1534-2218_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 411 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.821516Jy sigma=0.004936 ! Fit after self-cal, rms=0.797441Jy sigma=0.004789 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.123 mas, bmaj=6.11 mas, bpa=-6.296 degrees ! Estimated noise=1973.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159837 Jy ! Component: 100 - total flux cleaned = 0.198932 Jy ! Total flux subtracted in 100 components = 0.198932 Jy ! Clean residual min=-0.011802 max=0.016962 Jy/beam ! Clean residual mean=-0.000044 rms=0.003064 Jy/beam ! Combined flux in latest and established models = 0.198932 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.198932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130606Jy sigma=0.000696 ! Fit after self-cal, rms=0.130569Jy sigma=0.000696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=6.774 mas, bpa=-5.459 degrees ! Estimated noise=1224.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225359 Jy ! Component: 100 - total flux cleaned = 0.033553 Jy ! Component: 150 - total flux cleaned = 0.0395967 Jy ! Component: 200 - total flux cleaned = 0.0430226 Jy ! Total flux subtracted in 200 components = 0.0430226 Jy ! Clean residual min=-0.005217 max=0.008505 Jy/beam ! Clean residual mean=-0.000019 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.241955 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 33 components and 0.241955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127352Jy sigma=0.000668 ! Fit after self-cal, rms=0.127292Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 LA 1.01 ! MK 0.97 NL 0.94 OV 1.25 PT 0.97 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.07 LA 0.98 ! MK 0.99 NL 0.99 OV 1.23 PT 0.94 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.04 LA 0.98 ! MK 1.02 NL 0.98 OV 1.11 PT 0.94 ! SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.03 LA 0.86 ! MK 1.14 NL 1.00* OV 1.29 PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.127292Jy sigma=0.000668 ! Fit after self-cal, rms=0.132543Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=6.8 mas, bpa=-5.354 degrees ! Estimated noise=1223.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257773 Jy ! Component: 100 - total flux cleaned = -0.000287562 Jy ! Component: 150 - total flux cleaned = -0.000262909 Jy ! Component: 200 - total flux cleaned = -0.00024228 Jy ! Total flux subtracted in 200 components = -0.00024228 Jy ! Clean residual min=-0.003880 max=0.003687 Jy/beam ! Clean residual mean=0.000012 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.241712 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.241712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132533Jy sigma=0.000660 ! Fit after self-cal, rms=0.132737Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132737Jy sigma=0.000660 ! Fit after self-cal, rms=0.133862Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=6.816 mas, bpa=-5.27 degrees ! Estimated noise=1227.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255631 Jy ! Component: 100 - total flux cleaned = 0.000256584 Jy ! Component: 150 - total flux cleaned = 0.000235857 Jy ! Component: 200 - total flux cleaned = 0.000217719 Jy ! Total flux subtracted in 200 components = 0.000217719 Jy ! Clean residual min=-0.003116 max=0.002844 Jy/beam ! Clean residual mean=-0.000000 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.24193 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.24193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133854Jy sigma=0.000658 ! Fit after self-cal, rms=0.133901Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.36764e-05 Jy ! Component: 100 - total flux cleaned = -1.36183e-05 Jy ! Component: 150 - total flux cleaned = -2.88058e-05 Jy ! Component: 200 - total flux cleaned = -2.85879e-05 Jy ! Total flux subtracted in 200 components = -2.85879e-05 Jy ! Clean residual min=-0.003077 max=0.002839 Jy/beam ! Clean residual mean=-0.000000 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.241901 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.241901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133898Jy sigma=0.000658 ! Fit after self-cal, rms=0.133896Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133896Jy sigma=0.000658 ! Fit after self-cal, rms=0.134233Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=6.827 mas, bpa=-5.243 degrees ! Estimated noise=1228.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000329885 Jy ! Component: 100 - total flux cleaned = -0.000348498 Jy ! Component: 150 - total flux cleaned = -0.000365086 Jy ! Component: 200 - total flux cleaned = -0.00036465 Jy ! Total flux subtracted in 200 components = -0.00036465 Jy ! Clean residual min=-0.003087 max=0.002814 Jy/beam ! Clean residual mean=-0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.241537 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.241537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134227Jy sigma=0.000657 ! Fit after self-cal, rms=0.134243Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.14275e-06 Jy ! Component: 100 - total flux cleaned = -4.37371e-06 Jy ! Component: 150 - total flux cleaned = -5.07834e-06 Jy ! Component: 200 - total flux cleaned = -1.79867e-05 Jy ! Total flux subtracted in 200 components = -1.79867e-05 Jy ! Clean residual min=-0.003066 max=0.002812 Jy/beam ! Clean residual mean=-0.000005 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.241519 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.241519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134240Jy sigma=0.000657 ! Fit after self-cal, rms=0.134238Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134238Jy sigma=0.000657 ! Fit after self-cal, rms=0.134381Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.451 mas, bmaj=14.63 mas, bpa=4.636 degrees ! Estimated noise=1756.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016858 Jy ! Component: 100 - total flux cleaned = 0.00021473 Jy ! Component: 150 - total flux cleaned = 0.000233732 Jy ! Component: 200 - total flux cleaned = 0.000264801 Jy ! Total flux subtracted in 200 components = 0.000264801 Jy ! Clean residual min=-0.003696 max=0.003012 Jy/beam ! Clean residual mean=-0.000012 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.241784 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.241784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134380Jy sigma=0.000657 ! Fit after self-cal, rms=0.134381Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.15039e-05 Jy ! Component: 100 - total flux cleaned = -1.87642e-05 Jy ! Component: 150 - total flux cleaned = -5.08161e-06 Jy ! Component: 200 - total flux cleaned = 7.13425e-06 Jy ! Total flux subtracted in 200 components = 7.13425e-06 Jy ! Clean residual min=-0.003704 max=0.003010 Jy/beam ! Clean residual mean=-0.000012 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.241791 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.241791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134381Jy sigma=0.000657 ! Fit after self-cal, rms=0.134379Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.834 mas, bpa=-5.234 degrees ! Estimated noise=1228.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.616 x 6.834 at -5.234 degrees (North through East) ! Clean map min=-0.0029028 max=0.2137 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.147 mas, bmaj=6.141 mas, bpa=-6.131 degrees ! Estimated noise=1996.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161325 Jy ! Component: 100 - total flux cleaned = 0.200253 Jy ! Component: 150 - total flux cleaned = 0.218569 Jy ! Component: 200 - total flux cleaned = 0.22862 Jy ! Total flux subtracted in 200 components = 0.22862 Jy ! Clean residual min=-0.006531 max=0.006283 Jy/beam ! Clean residual mean=-0.000013 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.22862 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.22862 Jy ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.834 mas, bpa=-5.234 degrees ! Estimated noise=1228.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669697 Jy ! Component: 100 - total flux cleaned = 0.00971414 Jy ! Component: 150 - total flux cleaned = 0.0113033 Jy ! Component: 200 - total flux cleaned = 0.0121711 Jy ! Total flux subtracted in 200 components = 0.0121711 Jy ! Clean residual min=-0.003067 max=0.002891 Jy/beam ! Clean residual mean=-0.000007 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.240791 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.240791 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.451 mas, bmaj=14.63 mas, bpa=4.636 degrees ! Estimated noise=1756.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000836347 Jy ! Component: 100 - total flux cleaned = 0.000868458 Jy ! Component: 150 - total flux cleaned = 0.000921613 Jy ! Component: 200 - total flux cleaned = 0.000963945 Jy ! Total flux subtracted in 200 components = 0.000963945 Jy ! Clean residual min=-0.003691 max=0.002981 Jy/beam ! Clean residual mean=-0.000013 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.241755 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75964e-05 Jy ! Component: 100 - total flux cleaned = 1.92221e-05 Jy ! Component: 150 - total flux cleaned = 2.08558e-05 Jy ! Component: 200 - total flux cleaned = 2.23072e-05 Jy ! Total flux subtracted in 200 components = 2.23072e-05 Jy ! Clean residual min=-0.003697 max=0.003017 Jy/beam ! Clean residual mean=-0.000012 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.241777 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.241777 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.834 mas, bpa=-5.234 degrees ! Estimated noise=1228.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.98319e-06 Jy ! Component: 100 - total flux cleaned = -0.000125588 Jy ! Component: 150 - total flux cleaned = -0.000262971 Jy ! Component: 200 - total flux cleaned = -0.000349235 Jy ! Total flux subtracted in 200 components = -0.000349235 Jy ! Clean residual min=-0.002989 max=0.002833 Jy/beam ! Clean residual mean=-0.000005 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.241428 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.241428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134384Jy sigma=0.000657 ! Fit after self-cal, rms=0.134383Jy sigma=0.000657 wmodel J1534-2218_S_2017_01_21_pus_map.mod ! Writing 46 model components to file: J1534-2218_S_2017_01_21_pus_map.mod wobs J1534-2218_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1534-2218_S_2017_01_21_pus_uvs.fits wwins J1534-2218_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1534-2218_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00071461 Jy ! Component: 100 - total flux cleaned = -0.00110351 Jy ! Component: 150 - total flux cleaned = -0.00132872 Jy ! Component: 200 - total flux cleaned = -0.00137218 Jy ! Component: 250 - total flux cleaned = -0.00137275 Jy ! Component: 300 - total flux cleaned = -0.00145135 Jy ! Component: 350 - total flux cleaned = -0.00133835 Jy ! Component: 400 - total flux cleaned = -0.00126583 Jy ! Component: 450 - total flux cleaned = -0.00119598 Jy ! Component: 500 - total flux cleaned = -0.0011623 Jy ! Component: 550 - total flux cleaned = -0.00106242 Jy ! Component: 600 - total flux cleaned = -0.000997444 Jy ! Component: 650 - total flux cleaned = -0.000933445 Jy ! Component: 700 - total flux cleaned = -0.00080927 Jy ! Component: 750 - total flux cleaned = -0.000718272 Jy ! Component: 800 - total flux cleaned = -0.000598543 Jy ! Component: 850 - total flux cleaned = -0.00054044 Jy ! Component: 900 - total flux cleaned = -0.000455177 Jy ! Component: 950 - total flux cleaned = -0.000342632 Jy ! Component: 1000 - total flux cleaned = -0.000260317 Jy ! Component: 1050 - total flux cleaned = -0.000152421 Jy ! Component: 1100 - total flux cleaned = -7.24259e-05 Jy ! Component: 1150 - total flux cleaned = 3.21129e-05 Jy ! Component: 1200 - total flux cleaned = 0.000186482 Jy ! Component: 1250 - total flux cleaned = 0.000312342 Jy ! Component: 1300 - total flux cleaned = 0.000460894 Jy ! Component: 1350 - total flux cleaned = 0.000534109 Jy ! Component: 1400 - total flux cleaned = 0.000701459 Jy ! Component: 1450 - total flux cleaned = 0.000818899 Jy ! Component: 1500 - total flux cleaned = 0.000958174 Jy ! Component: 1550 - total flux cleaned = 0.00102692 Jy ! Component: 1600 - total flux cleaned = 0.00111737 Jy ! Component: 1650 - total flux cleaned = 0.00125093 Jy ! Component: 1700 - total flux cleaned = 0.0014037 Jy ! Component: 1750 - total flux cleaned = 0.00146821 Jy ! Component: 1800 - total flux cleaned = 0.00155315 Jy ! Component: 1850 - total flux cleaned = 0.00157412 Jy ! Component: 1900 - total flux cleaned = 0.00161574 Jy ! Component: 1950 - total flux cleaned = 0.00163618 Jy ! Component: 2000 - total flux cleaned = 0.0016968 Jy ! Component: 2050 - total flux cleaned = 0.0016365 Jy ! Component: 2100 - total flux cleaned = 0.00163678 Jy ! Component: 2150 - total flux cleaned = 0.00171495 Jy ! Component: 2200 - total flux cleaned = 0.00169546 Jy ! Component: 2250 - total flux cleaned = 0.0016763 Jy ! Component: 2300 - total flux cleaned = 0.00163852 Jy ! Component: 2350 - total flux cleaned = 0.00169439 Jy ! Component: 2400 - total flux cleaned = 0.00171269 Jy ! Component: 2450 - total flux cleaned = 0.00169426 Jy ! Component: 2500 - total flux cleaned = 0.00173034 Jy ! Component: 2550 - total flux cleaned = 0.00169465 Jy ! Component: 2600 - total flux cleaned = 0.00171239 Jy ! Component: 2650 - total flux cleaned = 0.0016947 Jy ! Component: 2700 - total flux cleaned = 0.00167727 Jy ! Component: 2750 - total flux cleaned = 0.00164284 Jy ! Component: 2800 - total flux cleaned = 0.00160861 Jy ! Component: 2850 - total flux cleaned = 0.00162543 Jy ! Component: 2900 - total flux cleaned = 0.00160853 Jy ! Component: 2950 - total flux cleaned = 0.00150867 Jy ! Component: 3000 - total flux cleaned = 0.00147595 Jy ! Component: 3050 - total flux cleaned = 0.00144338 Jy ! Component: 3100 - total flux cleaned = 0.00147588 Jy ! Component: 3150 - total flux cleaned = 0.0013954 Jy ! Component: 3200 - total flux cleaned = 0.00141138 Jy ! Component: 3250 - total flux cleaned = 0.00139547 Jy ! Component: 3300 - total flux cleaned = 0.00139534 Jy ! Component: 3350 - total flux cleaned = 0.0013953 Jy ! Component: 3400 - total flux cleaned = 0.00137972 Jy ! Component: 3450 - total flux cleaned = 0.00137979 Jy ! Component: 3500 - total flux cleaned = 0.0014411 Jy ! Component: 3550 - total flux cleaned = 0.00142594 Jy ! Component: 3600 - total flux cleaned = 0.00144118 Jy ! Component: 3650 - total flux cleaned = 0.00148633 Jy ! Component: 3700 - total flux cleaned = 0.00153101 Jy ! Component: 3750 - total flux cleaned = 0.00151613 Jy ! Component: 3800 - total flux cleaned = 0.00157536 Jy ! Component: 3850 - total flux cleaned = 0.00153112 Jy ! Component: 3900 - total flux cleaned = 0.00157518 Jy ! Component: 3950 - total flux cleaned = 0.0016189 Jy ! Component: 4000 - total flux cleaned = 0.00164785 Jy ! Component: 4050 - total flux cleaned = 0.00166215 Jy ! Total flux subtracted in 4096 components = 0.00171958 Jy ! Clean residual min=-0.000911 max=0.001034 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.243147 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 303 components and 0.243147 Jy ![Exited script file: muppet] wmap "J1534-2218_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.616 x 6.834 at -5.234 degrees (North through East) ! Clean map min=-0.0018011 max=0.21388 Jy/beam ! Writing clean map to FITS file: J1534-2218_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.213884 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236268 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.331396 0.331396 0.662792 1.32558 2.65117 5.30234 10.6047 21.2093 42.4187 84.8374 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.213 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.616 x 6.834 at -5.234 degrees (North through East) ! Clean map min=-0.0018011 max=0.21388 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1534-2218_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:22 2019