! Started logfile: J1534-2218_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:16:27 2019 obs J1534-2218_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1534-2218_S_2017_01_16_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.773946 visibilities/baseline/integration-bin. ! Found source: J1534-2218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 8080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1534-2218_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.817496Jy sigma=0.005360 ! Fit after self-cal, rms=0.787419Jy sigma=0.005175 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=13.59 mas, bpa=19.66 degrees ! Estimated noise=1876.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167167 Jy ! Component: 100 - total flux cleaned = 0.209032 Jy ! Total flux subtracted in 100 components = 0.209032 Jy ! Clean residual min=-0.009253 max=0.016666 Jy/beam ! Clean residual mean=-0.000052 rms=0.003131 Jy/beam ! Combined flux in latest and established models = 0.209032 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.209032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120356Jy sigma=0.000705 ! Fit after self-cal, rms=0.120380Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=15.13 mas, bpa=17.9 degrees ! Estimated noise=1247.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226237 Jy ! Component: 100 - total flux cleaned = 0.0343225 Jy ! Component: 150 - total flux cleaned = 0.0414176 Jy ! Component: 200 - total flux cleaned = 0.0460371 Jy ! Total flux subtracted in 200 components = 0.0460371 Jy ! Clean residual min=-0.004969 max=0.005620 Jy/beam ! Clean residual mean=-0.000052 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.25507 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 47 components and 0.25507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116699Jy sigma=0.000670 ! Fit after self-cal, rms=0.116744Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.02 KP 1.00 ! LA 1.01 MK 1.00* NL 0.92 OV 0.98 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.95 HN 1.06 KP 0.99 ! LA 0.97 MK 1.00* NL 1.03 OV 1.01 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.97 KP 0.98 ! LA 0.99 MK 1.00* NL 1.01 OV 0.98 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.04 KP 1.19 ! LA 0.98 MK 1.00* NL 1.00* OV 0.93 ! PT 0.99 SC 1.07 ! ! ! Fit before self-cal, rms=0.116744Jy sigma=0.000670 ! Fit after self-cal, rms=0.121621Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=15.22 mas, bpa=17.78 degrees ! Estimated noise=1246.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000253341 Jy ! Component: 100 - total flux cleaned = -0.000423221 Jy ! Component: 150 - total flux cleaned = -0.000508218 Jy ! Component: 200 - total flux cleaned = -0.000471345 Jy ! Total flux subtracted in 200 components = -0.000471345 Jy ! Clean residual min=-0.003693 max=0.002937 Jy/beam ! Clean residual mean=-0.000024 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.254598 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.254598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121582Jy sigma=0.000661 ! Fit after self-cal, rms=0.121759Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121759Jy sigma=0.000661 ! Fit after self-cal, rms=0.121807Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=15.19 mas, bpa=17.76 degrees ! Estimated noise=1245.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318168 Jy ! Component: 100 - total flux cleaned = -0.000355918 Jy ! Component: 150 - total flux cleaned = -0.000417345 Jy ! Component: 200 - total flux cleaned = -0.000416608 Jy ! Total flux subtracted in 200 components = -0.000416608 Jy ! Clean residual min=-0.003468 max=0.002892 Jy/beam ! Clean residual mean=-0.000021 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.254182 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.254182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121784Jy sigma=0.000660 ! Fit after self-cal, rms=0.121785Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.2623e-06 Jy ! Component: 100 - total flux cleaned = 2.59272e-05 Jy ! Component: 150 - total flux cleaned = 4.47667e-05 Jy ! Component: 200 - total flux cleaned = 6.26427e-05 Jy ! Total flux subtracted in 200 components = 6.26427e-05 Jy ! Clean residual min=-0.003388 max=0.002919 Jy/beam ! Clean residual mean=-0.000021 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.254244 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.254244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121777Jy sigma=0.000660 ! Fit after self-cal, rms=0.121777Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121777Jy sigma=0.000660 ! Fit after self-cal, rms=0.121793Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=15.16 mas, bpa=17.73 degrees ! Estimated noise=1245.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347491 Jy ! Component: 100 - total flux cleaned = -0.000407369 Jy ! Component: 150 - total flux cleaned = -0.000427769 Jy ! Component: 200 - total flux cleaned = -0.000429304 Jy ! Total flux subtracted in 200 components = -0.000429304 Jy ! Clean residual min=-0.003307 max=0.002845 Jy/beam ! Clean residual mean=-0.000019 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.253815 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.253815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121780Jy sigma=0.000660 ! Fit after self-cal, rms=0.121778Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81429e-06 Jy ! Component: 100 - total flux cleaned = 2.90651e-05 Jy ! Component: 150 - total flux cleaned = 2.89906e-05 Jy ! Component: 200 - total flux cleaned = 4.30162e-05 Jy ! Total flux subtracted in 200 components = 4.30162e-05 Jy ! Clean residual min=-0.003229 max=0.002878 Jy/beam ! Clean residual mean=-0.000019 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.253858 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.253858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121773Jy sigma=0.000660 ! Fit after self-cal, rms=0.121773Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121773Jy sigma=0.000660 ! Fit after self-cal, rms=0.121813Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.877 mas, bmaj=20.64 mas, bpa=8.221 degrees ! Estimated noise=1418.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495942 Jy ! Component: 100 - total flux cleaned = -0.000493061 Jy ! Component: 150 - total flux cleaned = -0.000525738 Jy ! Component: 200 - total flux cleaned = -0.000551337 Jy ! Total flux subtracted in 200 components = -0.000551337 Jy ! Clean residual min=-0.003826 max=0.003130 Jy/beam ! Clean residual mean=-0.000029 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.253307 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 0.253307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121812Jy sigma=0.000660 ! Fit after self-cal, rms=0.121812Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.46943e-06 Jy ! Component: 100 - total flux cleaned = 9.77316e-06 Jy ! Component: 150 - total flux cleaned = 1.98276e-05 Jy ! Component: 200 - total flux cleaned = 2.89974e-05 Jy ! Total flux subtracted in 200 components = 2.89974e-05 Jy ! Clean residual min=-0.003794 max=0.003110 Jy/beam ! Clean residual mean=-0.000029 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.253336 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 108 components and 0.253336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121812Jy sigma=0.000660 ! Fit after self-cal, rms=0.121812Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=15.14 mas, bpa=17.72 degrees ! Estimated noise=1245.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 15.14 at 17.72 degrees (North through East) ! Clean map min=-0.0031635 max=0.21673 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=13.59 mas, bpa=19.48 degrees ! Estimated noise=1886.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167846 Jy ! Component: 100 - total flux cleaned = 0.208867 Jy ! Component: 150 - total flux cleaned = 0.225814 Jy ! Component: 200 - total flux cleaned = 0.234631 Jy ! Total flux subtracted in 200 components = 0.234631 Jy ! Clean residual min=-0.004513 max=0.005334 Jy/beam ! Clean residual mean=-0.000022 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.234631 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.234631 Jy ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=15.14 mas, bpa=17.72 degrees ! Estimated noise=1245.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674536 Jy ! Component: 100 - total flux cleaned = 0.0107076 Jy ! Component: 150 - total flux cleaned = 0.0132829 Jy ! Component: 200 - total flux cleaned = 0.0149716 Jy ! Total flux subtracted in 200 components = 0.0149716 Jy ! Clean residual min=-0.003015 max=0.002808 Jy/beam ! Clean residual mean=-0.000023 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.249602 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 58 components and 0.249602 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.877 mas, bmaj=20.64 mas, bpa=8.221 degrees ! Estimated noise=1418.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170207 Jy ! Component: 100 - total flux cleaned = 0.00261846 Jy ! Component: 150 - total flux cleaned = 0.00295306 Jy ! Component: 200 - total flux cleaned = 0.00309181 Jy ! Total flux subtracted in 200 components = 0.00309181 Jy ! Clean residual min=-0.003570 max=0.003177 Jy/beam ! Clean residual mean=-0.000032 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.252694 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123667 Jy ! Component: 100 - total flux cleaned = 0.000188591 Jy ! Component: 150 - total flux cleaned = 0.000218403 Jy ! Component: 200 - total flux cleaned = 0.000261266 Jy ! Total flux subtracted in 200 components = 0.000261266 Jy ! Clean residual min=-0.003601 max=0.003160 Jy/beam ! Clean residual mean=-0.000031 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.252956 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 76 components and 0.252956 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=15.14 mas, bpa=17.72 degrees ! Estimated noise=1245.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.72368e-07 Jy ! Component: 100 - total flux cleaned = -3.11285e-07 Jy ! Component: 150 - total flux cleaned = 1.85118e-05 Jy ! Component: 200 - total flux cleaned = 3.65919e-05 Jy ! Total flux subtracted in 200 components = 3.65919e-05 Jy ! Clean residual min=-0.003002 max=0.002856 Jy/beam ! Clean residual mean=-0.000018 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.252992 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.252992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121824Jy sigma=0.000660 ! Fit after self-cal, rms=0.121807Jy sigma=0.000660 wmodel J1534-2218_S_2017_01_16_pus_map.mod ! Writing 85 model components to file: J1534-2218_S_2017_01_16_pus_map.mod wobs J1534-2218_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1534-2218_S_2017_01_16_pus_uvs.fits wwins J1534-2218_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1534-2218_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383488 Jy ! Component: 100 - total flux cleaned = -0.000191974 Jy ! Component: 150 - total flux cleaned = 7.78875e-05 Jy ! Component: 200 - total flux cleaned = 0.000377754 Jy ! Component: 250 - total flux cleaned = 0.000662912 Jy ! Component: 300 - total flux cleaned = 0.000975524 Jy ! Component: 350 - total flux cleaned = 0.00131324 Jy ! Component: 400 - total flux cleaned = 0.00156518 Jy ! Component: 450 - total flux cleaned = 0.0017717 Jy ! Component: 500 - total flux cleaned = 0.00190375 Jy ! Component: 550 - total flux cleaned = 0.00206436 Jy ! Component: 600 - total flux cleaned = 0.00221994 Jy ! Component: 650 - total flux cleaned = 0.00216047 Jy ! Component: 700 - total flux cleaned = 0.00230838 Jy ! Component: 750 - total flux cleaned = 0.00233699 Jy ! Component: 800 - total flux cleaned = 0.00242056 Jy ! Component: 850 - total flux cleaned = 0.00247502 Jy ! Component: 900 - total flux cleaned = 0.00252794 Jy ! Component: 950 - total flux cleaned = 0.00260524 Jy ! Component: 1000 - total flux cleaned = 0.00265561 Jy ! Component: 1050 - total flux cleaned = 0.0027296 Jy ! Component: 1100 - total flux cleaned = 0.00275417 Jy ! Component: 1150 - total flux cleaned = 0.00289609 Jy ! Component: 1200 - total flux cleaned = 0.00303435 Jy ! Component: 1250 - total flux cleaned = 0.00316971 Jy ! Component: 1300 - total flux cleaned = 0.00325882 Jy ! Component: 1350 - total flux cleaned = 0.00339003 Jy ! Component: 1400 - total flux cleaned = 0.00354016 Jy ! Component: 1450 - total flux cleaned = 0.00366704 Jy ! Component: 1500 - total flux cleaned = 0.00377067 Jy ! Component: 1550 - total flux cleaned = 0.00385231 Jy ! Component: 1600 - total flux cleaned = 0.00391296 Jy ! Component: 1650 - total flux cleaned = 0.00399253 Jy ! Component: 1700 - total flux cleaned = 0.00405139 Jy ! Component: 1750 - total flux cleaned = 0.00414857 Jy ! Component: 1800 - total flux cleaned = 0.00422553 Jy ! Component: 1850 - total flux cleaned = 0.00428271 Jy ! Component: 1900 - total flux cleaned = 0.00441435 Jy ! Component: 1950 - total flux cleaned = 0.00445155 Jy ! Component: 2000 - total flux cleaned = 0.00445173 Jy ! Component: 2050 - total flux cleaned = 0.00448842 Jy ! Component: 2100 - total flux cleaned = 0.00452473 Jy ! Component: 2150 - total flux cleaned = 0.00456092 Jy ! Component: 2200 - total flux cleaned = 0.00457898 Jy ! Component: 2250 - total flux cleaned = 0.00463296 Jy ! Component: 2300 - total flux cleaned = 0.00466871 Jy ! Component: 2350 - total flux cleaned = 0.00472223 Jy ! Component: 2400 - total flux cleaned = 0.00468643 Jy ! Component: 2450 - total flux cleaned = 0.00470425 Jy ! Component: 2500 - total flux cleaned = 0.00465061 Jy ! Component: 2550 - total flux cleaned = 0.00470418 Jy ! Component: 2600 - total flux cleaned = 0.00468622 Jy ! Component: 2650 - total flux cleaned = 0.00465043 Jy ! Component: 2700 - total flux cleaned = 0.00463244 Jy ! Component: 2750 - total flux cleaned = 0.00463254 Jy ! Component: 2800 - total flux cleaned = 0.00457819 Jy ! Component: 2850 - total flux cleaned = 0.00454155 Jy ! Component: 2900 - total flux cleaned = 0.00450454 Jy ! Component: 2950 - total flux cleaned = 0.00446721 Jy ! Component: 3000 - total flux cleaned = 0.00444816 Jy ! Component: 3050 - total flux cleaned = 0.00442893 Jy ! Component: 3100 - total flux cleaned = 0.00439041 Jy ! Component: 3150 - total flux cleaned = 0.00435153 Jy ! Component: 3200 - total flux cleaned = 0.00433162 Jy ! Component: 3250 - total flux cleaned = 0.00433137 Jy ! Component: 3300 - total flux cleaned = 0.00431122 Jy ! Component: 3350 - total flux cleaned = 0.00433144 Jy ! Component: 3400 - total flux cleaned = 0.00433148 Jy ! Component: 3450 - total flux cleaned = 0.00433159 Jy ! Component: 3500 - total flux cleaned = 0.00431058 Jy ! Component: 3550 - total flux cleaned = 0.00431047 Jy ! Component: 3600 - total flux cleaned = 0.00424563 Jy ! Component: 3650 - total flux cleaned = 0.00424528 Jy ! Component: 3700 - total flux cleaned = 0.00424502 Jy ! Component: 3750 - total flux cleaned = 0.00424505 Jy ! Component: 3800 - total flux cleaned = 0.00419967 Jy ! Component: 3850 - total flux cleaned = 0.0041767 Jy ! Component: 3900 - total flux cleaned = 0.00415332 Jy ! Component: 3950 - total flux cleaned = 0.00413012 Jy ! Component: 4000 - total flux cleaned = 0.00410623 Jy ! Component: 4050 - total flux cleaned = 0.00405801 Jy ! Total flux subtracted in 4096 components = 0.00405789 Jy ! Clean residual min=-0.001322 max=0.001377 Jy/beam ! Clean residual mean=0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.25705 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 322 components and 0.25705 Jy ![Exited script file: muppet] wmap "J1534-2218_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 15.14 at 17.72 degrees (North through East) ! Clean map min=-0.0032397 max=0.21926 Jy/beam ! Writing clean map to FITS file: J1534-2218_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.219256 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000447199 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.611886 0.611886 1.22377 2.44755 4.89509 9.79018 19.5804 39.1607 78.3214 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.219 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 15.14 at 17.72 degrees (North through East) ! Clean map min=-0.0032397 max=0.21926 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1534-2218_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:16:32 2019