! Started logfile: J1533-0421_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:43:56 2019 obs J1533-0421_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1533-0421_S_2017_03_27_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970698 visibilities/baseline/integration-bin. ! Found source: J1533-0421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 19744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1533-0421_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898434Jy sigma=0.006867 ! Fit after self-cal, rms=0.881920Jy sigma=0.006772 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.681 mas, bmaj=6.859 mas, bpa=-4.27 degrees ! Estimated noise=1008.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0902635 Jy ! Component: 100 - total flux cleaned = 0.112897 Jy ! Total flux subtracted in 100 components = 0.112897 Jy ! Clean residual min=-0.010015 max=0.028766 Jy/beam ! Clean residual mean=0.000032 rms=0.002440 Jy/beam ! Combined flux in latest and established models = 0.112897 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.112897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134739Jy sigma=0.000822 ! Fit after self-cal, rms=0.134720Jy sigma=0.000822 ! Inverting map ! Added new window around map position (6.5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024003 Jy ! Component: 100 - total flux cleaned = 0.0362709 Jy ! Total flux subtracted in 100 components = 0.0362709 Jy ! Clean residual min=-0.007381 max=0.017967 Jy/beam ! Clean residual mean=0.000024 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.149168 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.149168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128566Jy sigma=0.000759 ! Fit after self-cal, rms=0.127238Jy sigma=0.000748 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147489 Jy ! Component: 100 - total flux cleaned = 0.0231025 Jy ! Total flux subtracted in 100 components = 0.0231025 Jy ! Clean residual min=-0.005108 max=0.009762 Jy/beam ! Clean residual mean=0.000015 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.17227 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.17227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124585Jy sigma=0.000722 ! Fit after self-cal, rms=0.124166Jy sigma=0.000718 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00920649 Jy ! Component: 100 - total flux cleaned = 0.0146605 Jy ! Total flux subtracted in 100 components = 0.0146605 Jy ! Clean residual min=-0.004220 max=0.006084 Jy/beam ! Clean residual mean=0.000010 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.186931 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 46 components and 0.186931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123065Jy sigma=0.000708 ! Fit after self-cal, rms=0.122911Jy sigma=0.000706 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.779 mas, bpa=-2.49 degrees ! Estimated noise=709.559 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00829935 Jy ! Component: 100 - total flux cleaned = 0.0127566 Jy ! Component: 150 - total flux cleaned = 0.0149722 Jy ! Component: 200 - total flux cleaned = 0.0157596 Jy ! Total flux subtracted in 200 components = 0.0157596 Jy ! Clean residual min=-0.003517 max=0.005357 Jy/beam ! Clean residual mean=0.000009 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.20269 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.20269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122289Jy sigma=0.000700 ! Fit after self-cal, rms=0.122219Jy sigma=0.000700 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.03 KP 1.04 ! LA 0.99 MK 1.05 NL 1.02 OV 1.05 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.17 KP 1.01 ! LA 0.96 MK 1.03 NL 1.10 OV 1.09 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.09 KP 0.99 ! LA 0.98 MK 1.06 NL 1.01 OV 0.97 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 1.06 KP 1.00* ! LA 0.84 MK 1.06 NL 1.00* OV 0.82 ! PT 0.97 SC 1.05 ! ! ! Fit before self-cal, rms=0.122219Jy sigma=0.000700 ! Fit after self-cal, rms=0.118297Jy sigma=0.000695 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=7.841 mas, bpa=-2.132 degrees ! Estimated noise=724.708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150737 Jy ! Component: 100 - total flux cleaned = 0.00104424 Jy ! Component: 150 - total flux cleaned = 0.00110267 Jy ! Component: 200 - total flux cleaned = 0.00115227 Jy ! Total flux subtracted in 200 components = 0.00115227 Jy ! Clean residual min=-0.003036 max=0.003152 Jy/beam ! Clean residual mean=0.000005 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.203842 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.203842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118164Jy sigma=0.000694 ! Fit after self-cal, rms=0.118073Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118073Jy sigma=0.000694 ! Fit after self-cal, rms=0.110680Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=7.859 mas, bpa=-2.441 degrees ! Estimated noise=728.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969908 Jy ! Component: 100 - total flux cleaned = 0.000969622 Jy ! Component: 150 - total flux cleaned = 0.000925929 Jy ! Component: 200 - total flux cleaned = 0.000927073 Jy ! Total flux subtracted in 200 components = 0.000927073 Jy ! Clean residual min=-0.002549 max=0.002597 Jy/beam ! Clean residual mean=-0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.20477 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 0.20477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110624Jy sigma=0.000689 ! Fit after self-cal, rms=0.110625Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37.5, 87.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208061 Jy ! Component: 100 - total flux cleaned = 0.00198694 Jy ! Component: 150 - total flux cleaned = 0.00185159 Jy ! Component: 200 - total flux cleaned = 0.00172558 Jy ! Total flux subtracted in 200 components = 0.00172558 Jy ! Clean residual min=-0.002419 max=0.002353 Jy/beam ! Clean residual mean=-0.000002 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.206495 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.206495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110553Jy sigma=0.000688 ! Fit after self-cal, rms=0.110548Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110548Jy sigma=0.000688 ! Fit after self-cal, rms=0.110405Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=7.852 mas, bpa=-2.447 degrees ! Estimated noise=726.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681766 Jy ! Component: 100 - total flux cleaned = 0.000683577 Jy ! Component: 150 - total flux cleaned = 0.00060909 Jy ! Component: 200 - total flux cleaned = 0.000539593 Jy ! Total flux subtracted in 200 components = 0.000539593 Jy ! Clean residual min=-0.002274 max=0.002256 Jy/beam ! Clean residual mean=-0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.207035 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.207035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110370Jy sigma=0.000687 ! Fit after self-cal, rms=0.110372Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149531 Jy ! Component: 100 - total flux cleaned = 0.000149203 Jy ! Component: 150 - total flux cleaned = 8.41426e-05 Jy ! Component: 200 - total flux cleaned = -6.70648e-06 Jy ! Total flux subtracted in 200 components = -6.70648e-06 Jy ! Clean residual min=-0.002236 max=0.002229 Jy/beam ! Clean residual mean=-0.000002 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.207028 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.207028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110348Jy sigma=0.000687 ! Fit after self-cal, rms=0.110348Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110348Jy sigma=0.000687 ! Fit after self-cal, rms=0.110043Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.778 mas, bmaj=13.01 mas, bpa=4.517 degrees ! Estimated noise=886.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542796 Jy ! Component: 100 - total flux cleaned = 0.00033683 Jy ! Component: 150 - total flux cleaned = 0.000282173 Jy ! Component: 200 - total flux cleaned = 0.000264161 Jy ! Total flux subtracted in 200 components = 0.000264161 Jy ! Clean residual min=-0.002576 max=0.002660 Jy/beam ! Clean residual mean=-0.000003 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.207292 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 117 components and 0.207292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110043Jy sigma=0.000687 ! Fit after self-cal, rms=0.110041Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.81478e-05 Jy ! Component: 100 - total flux cleaned = -5.52506e-05 Jy ! Component: 150 - total flux cleaned = -0.00010169 Jy ! Component: 200 - total flux cleaned = -0.000144722 Jy ! Total flux subtracted in 200 components = -0.000144722 Jy ! Clean residual min=-0.002560 max=0.002637 Jy/beam ! Clean residual mean=-0.000003 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.207147 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 123 components and 0.207147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110039Jy sigma=0.000687 ! Fit after self-cal, rms=0.110038Jy sigma=0.000687 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=7.843 mas, bpa=-2.42 degrees ! Estimated noise=726.158 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 7.843 at -2.42 degrees (North through East) ! Clean map min=-0.002156 max=0.11106 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.72 mas, bmaj=6.883 mas, bpa=-4.26 degrees ! Estimated noise=1040.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0953004 Jy ! Component: 100 - total flux cleaned = 0.133331 Jy ! Component: 150 - total flux cleaned = 0.153531 Jy ! Component: 200 - total flux cleaned = 0.167102 Jy ! Total flux subtracted in 200 components = 0.167102 Jy ! Clean residual min=-0.004257 max=0.008690 Jy/beam ! Clean residual mean=0.000008 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.167102 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.167102 Jy ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=7.843 mas, bpa=-2.42 degrees ! Estimated noise=726.158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146917 Jy ! Component: 100 - total flux cleaned = 0.0233204 Jy ! Component: 150 - total flux cleaned = 0.0287989 Jy ! Component: 200 - total flux cleaned = 0.0325341 Jy ! Total flux subtracted in 200 components = 0.0325341 Jy ! Clean residual min=-0.002602 max=0.002937 Jy/beam ! Clean residual mean=0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.199636 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 69 components and 0.199636 Jy ! Inverting map ! Added new window around map position (-4, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313678 Jy ! Component: 100 - total flux cleaned = 0.00547092 Jy ! Component: 150 - total flux cleaned = 0.00683611 Jy ! Component: 200 - total flux cleaned = 0.00735335 Jy ! Total flux subtracted in 200 components = 0.00735335 Jy ! Clean residual min=-0.002355 max=0.002506 Jy/beam ! Clean residual mean=-0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.206989 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 96 components and 0.206989 Jy ! Inverting map ! Added new window around map position (21, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212386 Jy ! Component: 100 - total flux cleaned = 0.00252373 Jy ! Component: 150 - total flux cleaned = 0.00257515 Jy ! Component: 200 - total flux cleaned = 0.00257499 Jy ! Total flux subtracted in 200 components = 0.00257499 Jy ! Clean residual min=-0.002095 max=0.002192 Jy/beam ! Clean residual mean=-0.000002 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.209564 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 117 components and 0.209564 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.778 mas, bmaj=13.01 mas, bpa=4.517 degrees ! Estimated noise=886.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510673 Jy ! Component: 100 - total flux cleaned = 0.000156628 Jy ! Component: 150 - total flux cleaned = -2.65407e-05 Jy ! Component: 200 - total flux cleaned = -0.000136508 Jy ! Total flux subtracted in 200 components = -0.000136508 Jy ! Clean residual min=-0.002279 max=0.002007 Jy/beam ! Clean residual mean=-0.000004 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.209428 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125126 Jy ! Component: 100 - total flux cleaned = -0.00021858 Jy ! Component: 150 - total flux cleaned = -0.000306921 Jy ! Component: 200 - total flux cleaned = -0.000388924 Jy ! Total flux subtracted in 200 components = -0.000388924 Jy ! Clean residual min=-0.002272 max=0.002003 Jy/beam ! Clean residual mean=-0.000004 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.209039 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 160 components and 0.209039 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=7.843 mas, bpa=-2.42 degrees ! Estimated noise=726.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001182 Jy ! Component: 100 - total flux cleaned = -0.000119448 Jy ! Component: 150 - total flux cleaned = -8.22005e-05 Jy ! Component: 200 - total flux cleaned = -8.28749e-05 Jy ! Total flux subtracted in 200 components = -8.28749e-05 Jy ! Clean residual min=-0.002088 max=0.002158 Jy/beam ! Clean residual mean=-0.000002 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.208956 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 178 components and 0.208956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109914Jy sigma=0.000687 ! Fit after self-cal, rms=0.109883Jy sigma=0.000686 wmodel J1533-0421_S_2017_03_27_pus_map.mod ! Writing 178 model components to file: J1533-0421_S_2017_03_27_pus_map.mod wobs J1533-0421_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1533-0421_S_2017_03_27_pus_uvs.fits wwins J1533-0421_S_2017_03_27_pus_map.win ! wwins: Wrote 6 windows to J1533-0421_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183838 Jy ! Component: 100 - total flux cleaned = 0.00032494 Jy ! Component: 150 - total flux cleaned = 0.000526739 Jy ! Component: 200 - total flux cleaned = 0.000721377 Jy ! Component: 250 - total flux cleaned = 0.0007841 Jy ! Component: 300 - total flux cleaned = 0.000936431 Jy ! Component: 350 - total flux cleaned = 0.00102569 Jy ! Component: 400 - total flux cleaned = 0.00117171 Jy ! Component: 450 - total flux cleaned = 0.00114295 Jy ! Component: 500 - total flux cleaned = 0.00120001 Jy ! Component: 550 - total flux cleaned = 0.00122789 Jy ! Component: 600 - total flux cleaned = 0.00128298 Jy ! Component: 650 - total flux cleaned = 0.00128265 Jy ! Component: 700 - total flux cleaned = 0.0012828 Jy ! Component: 750 - total flux cleaned = 0.00125672 Jy ! Component: 800 - total flux cleaned = 0.00135977 Jy ! Component: 850 - total flux cleaned = 0.00128354 Jy ! Component: 900 - total flux cleaned = 0.00130913 Jy ! Component: 950 - total flux cleaned = 0.00133397 Jy ! Component: 1000 - total flux cleaned = 0.00130934 Jy ! Component: 1050 - total flux cleaned = 0.00135781 Jy ! Component: 1100 - total flux cleaned = 0.0012617 Jy ! Component: 1150 - total flux cleaned = 0.001333 Jy ! Component: 1200 - total flux cleaned = 0.00123906 Jy ! Component: 1250 - total flux cleaned = 0.00123915 Jy ! Component: 1300 - total flux cleaned = 0.00126212 Jy ! Component: 1350 - total flux cleaned = 0.00121639 Jy ! Component: 1400 - total flux cleaned = 0.00121624 Jy ! Component: 1450 - total flux cleaned = 0.00121637 Jy ! Component: 1500 - total flux cleaned = 0.00117202 Jy ! Component: 1550 - total flux cleaned = 0.00112854 Jy ! Component: 1600 - total flux cleaned = 0.00115011 Jy ! Component: 1650 - total flux cleaned = 0.00112845 Jy ! Component: 1700 - total flux cleaned = 0.00106422 Jy ! Component: 1750 - total flux cleaned = 0.00102205 Jy ! Component: 1800 - total flux cleaned = 0.0010641 Jy ! Component: 1850 - total flux cleaned = 0.00106432 Jy ! Component: 1900 - total flux cleaned = 0.00108529 Jy ! Component: 1950 - total flux cleaned = 0.00120812 Jy ! Component: 2000 - total flux cleaned = 0.00112685 Jy ! Component: 2050 - total flux cleaned = 0.00120785 Jy ! Component: 2100 - total flux cleaned = 0.00120793 Jy ! Component: 2150 - total flux cleaned = 0.00118811 Jy ! Component: 2200 - total flux cleaned = 0.00120783 Jy ! Component: 2250 - total flux cleaned = 0.00116882 Jy ! Component: 2300 - total flux cleaned = 0.00130553 Jy ! Component: 2350 - total flux cleaned = 0.00128585 Jy ! Component: 2400 - total flux cleaned = 0.00128582 Jy ! Component: 2450 - total flux cleaned = 0.00134312 Jy ! Component: 2500 - total flux cleaned = 0.00134287 Jy ! Component: 2550 - total flux cleaned = 0.00130494 Jy ! Component: 2600 - total flux cleaned = 0.00134249 Jy ! Component: 2650 - total flux cleaned = 0.00126796 Jy ! Component: 2700 - total flux cleaned = 0.00124966 Jy ! Component: 2750 - total flux cleaned = 0.00134153 Jy ! Component: 2800 - total flux cleaned = 0.00135972 Jy ! Component: 2850 - total flux cleaned = 0.00137774 Jy ! Component: 2900 - total flux cleaned = 0.00143196 Jy ! Component: 2950 - total flux cleaned = 0.00143202 Jy ! Component: 3000 - total flux cleaned = 0.00148565 Jy ! Component: 3050 - total flux cleaned = 0.00155679 Jy ! Component: 3100 - total flux cleaned = 0.00155668 Jy ! Component: 3150 - total flux cleaned = 0.00157429 Jy ! Component: 3200 - total flux cleaned = 0.00164445 Jy ! Component: 3250 - total flux cleaned = 0.00164438 Jy ! Component: 3300 - total flux cleaned = 0.0016789 Jy ! Component: 3350 - total flux cleaned = 0.00171338 Jy ! Component: 3400 - total flux cleaned = 0.00173031 Jy ! Component: 3450 - total flux cleaned = 0.00178136 Jy ! Component: 3500 - total flux cleaned = 0.00186579 Jy ! Component: 3550 - total flux cleaned = 0.001849 Jy ! Component: 3600 - total flux cleaned = 0.00191582 Jy ! Component: 3650 - total flux cleaned = 0.00193243 Jy ! Component: 3700 - total flux cleaned = 0.00191582 Jy ! Component: 3750 - total flux cleaned = 0.00191581 Jy ! Component: 3800 - total flux cleaned = 0.00198145 Jy ! Component: 3850 - total flux cleaned = 0.00194887 Jy ! Component: 3900 - total flux cleaned = 0.00206256 Jy ! Component: 3950 - total flux cleaned = 0.00201406 Jy ! Component: 4000 - total flux cleaned = 0.0020785 Jy ! Component: 4050 - total flux cleaned = 0.00207845 Jy ! Total flux subtracted in 4096 components = 0.00212628 Jy ! Clean residual min=-0.000983 max=0.000873 Jy/beam ! Clean residual mean=-0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.211082 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 490 components and 0.211082 Jy ![Exited script file: muppet] wmap "J1533-0421_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 7.843 at -2.42 degrees (North through East) ! Clean map min=-0.0017516 max=0.10986 Jy/beam ! Writing clean map to FITS file: J1533-0421_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109855 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000296692 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.810224 0.810224 1.62045 3.2409 6.48179 12.9636 25.9272 51.8543 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.326 x 7.843 at -2.42 degrees (North through East) ! Clean map min=-0.0017516 max=0.10986 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1533-0421_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:44:02 2019