! Started logfile: J1532-3732_S_2017_09_26_pus_uvs.log on Sat May 11 13:02:35 2019 obs J1532-3732_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1532-3732_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.294123 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1532-3732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 12452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1532-3732_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2439 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.924872Jy sigma=0.005702 ! Fit after self-cal, rms=0.876567Jy sigma=0.005380 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=33.62 mas, bpa=-18.67 degrees ! Estimated noise=3099.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0866516 Jy ! Component: 100 - total flux cleaned = 0.11852 Jy ! Total flux subtracted in 100 components = 0.11852 Jy ! Clean residual min=-0.010759 max=0.014845 Jy/beam ! Clean residual mean=-0.000479 rms=0.004192 Jy/beam ! Combined flux in latest and established models = 0.11852 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.11852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112479Jy sigma=0.000680 ! Fit after self-cal, rms=0.112286Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.727 mas, bmaj=43.12 mas, bpa=-18.92 degrees ! Estimated noise=1204.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301057 Jy ! Component: 100 - total flux cleaned = 0.0462998 Jy ! Component: 150 - total flux cleaned = 0.0560312 Jy ! Component: 200 - total flux cleaned = 0.0621457 Jy ! Total flux subtracted in 200 components = 0.0621457 Jy ! Clean residual min=-0.005324 max=0.006256 Jy/beam ! Clean residual mean=-0.000300 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.180665 Jy ! Performing phase self-cal ! Adding 117 model components to the UV plane model. ! The established model now contains 154 components and 0.180665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104352Jy sigma=0.000625 ! Fit after self-cal, rms=0.103890Jy sigma=0.000622 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.06 ! LA 0.97 MK 0.98 NL 1.00* OV 1.03 ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.05 ! LA 0.95 MK 0.99 NL 1.00* OV 1.03 ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.00 ! LA 0.98 MK 1.15 NL 1.00* OV 0.95 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.103890Jy sigma=0.000622 ! Fit after self-cal, rms=0.101771Jy sigma=0.000622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.874 mas, bmaj=44.09 mas, bpa=-18.86 degrees ! Estimated noise=1189.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445094 Jy ! Component: 100 - total flux cleaned = 0.00520815 Jy ! Component: 150 - total flux cleaned = 0.00554081 Jy ! Component: 200 - total flux cleaned = 0.00582217 Jy ! Total flux subtracted in 200 components = 0.00582217 Jy ! Clean residual min=-0.004305 max=0.003416 Jy/beam ! Clean residual mean=-0.000029 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.186488 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 0.186488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101536Jy sigma=0.000621 ! Fit after self-cal, rms=0.101595Jy sigma=0.000621 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101595Jy sigma=0.000621 ! Fit after self-cal, rms=0.101648Jy sigma=0.000619 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.879 mas, bmaj=44.47 mas, bpa=-18.9 degrees ! Estimated noise=1189.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174657 Jy ! Component: 100 - total flux cleaned = 0.00206383 Jy ! Component: 150 - total flux cleaned = 0.00226053 Jy ! Component: 200 - total flux cleaned = 0.00235022 Jy ! Total flux subtracted in 200 components = 0.00235022 Jy ! Clean residual min=-0.002744 max=0.002798 Jy/beam ! Clean residual mean=0.000009 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.188838 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 198 components and 0.188838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101585Jy sigma=0.000619 ! Fit after self-cal, rms=0.101612Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421281 Jy ! Component: 100 - total flux cleaned = 0.000502334 Jy ! Component: 150 - total flux cleaned = 0.000457924 Jy ! Component: 200 - total flux cleaned = 0.000416483 Jy ! Total flux subtracted in 200 components = 0.000416483 Jy ! Clean residual min=-0.002843 max=0.002403 Jy/beam ! Clean residual mean=0.000012 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.189254 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 208 components and 0.189254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101596Jy sigma=0.000618 ! Fit after self-cal, rms=0.101589Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101589Jy sigma=0.000618 ! Fit after self-cal, rms=0.101415Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.881 mas, bmaj=44.55 mas, bpa=-18.91 degrees ! Estimated noise=1187.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606712 Jy ! Component: 100 - total flux cleaned = 0.00068069 Jy ! Component: 150 - total flux cleaned = 0.000703516 Jy ! Component: 200 - total flux cleaned = 0.000646766 Jy ! Total flux subtracted in 200 components = 0.000646766 Jy ! Clean residual min=-0.002585 max=0.002025 Jy/beam ! Clean residual mean=-0.000003 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.189901 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 224 components and 0.189901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101403Jy sigma=0.000618 ! Fit after self-cal, rms=0.101404Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.35425e-06 Jy ! Component: 100 - total flux cleaned = -9.13058e-06 Jy ! Component: 150 - total flux cleaned = -6.26751e-05 Jy ! Component: 200 - total flux cleaned = -9.64365e-05 Jy ! Total flux subtracted in 200 components = -9.64365e-05 Jy ! Clean residual min=-0.002588 max=0.001914 Jy/beam ! Clean residual mean=-0.000001 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.189805 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 231 components and 0.189805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101397Jy sigma=0.000618 ! Fit after self-cal, rms=0.101395Jy sigma=0.000618 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101395Jy sigma=0.000618 ! Fit after self-cal, rms=0.101394Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.94 mas, bmaj=53.95 mas, bpa=-9.733 degrees ! Estimated noise=1294.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320966 Jy ! Component: 100 - total flux cleaned = 0.000278939 Jy ! Component: 150 - total flux cleaned = 0.000240072 Jy ! Component: 200 - total flux cleaned = 0.00018916 Jy ! Total flux subtracted in 200 components = 0.00018916 Jy ! Clean residual min=-0.002326 max=0.001921 Jy/beam ! Clean residual mean=-0.000010 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.189994 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 235 components and 0.189994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101388Jy sigma=0.000618 ! Fit after self-cal, rms=0.101385Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.78924e-06 Jy ! Component: 100 - total flux cleaned = -4.33554e-05 Jy ! Component: 150 - total flux cleaned = -8.8856e-05 Jy ! Component: 200 - total flux cleaned = -0.00011601 Jy ! Total flux subtracted in 200 components = -0.00011601 Jy ! Clean residual min=-0.002309 max=0.001775 Jy/beam ! Clean residual mean=-0.000010 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.189878 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 243 components and 0.189878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101382Jy sigma=0.000618 ! Fit after self-cal, rms=0.101379Jy sigma=0.000618 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.88 mas, bmaj=44.58 mas, bpa=-18.91 degrees ! Estimated noise=1186.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.88 x 44.58 at -18.91 degrees (North through East) ! Clean map min=-0.002485 max=0.095807 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=35 mas, bpa=-18.7 degrees ! Estimated noise=3179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0879002 Jy ! Component: 100 - total flux cleaned = 0.122307 Jy ! Component: 150 - total flux cleaned = 0.142678 Jy ! Component: 200 - total flux cleaned = 0.156656 Jy ! Total flux subtracted in 200 components = 0.156656 Jy ! Clean residual min=-0.006926 max=0.007970 Jy/beam ! Clean residual mean=-0.000179 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 0.156656 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 95 model components to the UV plane model. ! The established model now contains 95 components and 0.156656 Jy ! Inverting map and beam ! Estimated beam: bmin=4.88 mas, bmaj=44.58 mas, bpa=-18.91 degrees ! Estimated noise=1186.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149172 Jy ! Component: 100 - total flux cleaned = 0.0229258 Jy ! Component: 150 - total flux cleaned = 0.0274589 Jy ! Component: 200 - total flux cleaned = 0.0300963 Jy ! Total flux subtracted in 200 components = 0.0300963 Jy ! Clean residual min=-0.003258 max=0.003055 Jy/beam ! Clean residual mean=-0.000033 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.186753 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 153 components and 0.186753 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.94 mas, bmaj=53.95 mas, bpa=-9.733 degrees ! Estimated noise=1294.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192251 Jy ! Component: 100 - total flux cleaned = 0.00266891 Jy ! Component: 150 - total flux cleaned = 0.00276517 Jy ! Component: 200 - total flux cleaned = 0.00282185 Jy ! Total flux subtracted in 200 components = 0.00282185 Jy ! Clean residual min=-0.002569 max=0.002453 Jy/beam ! Clean residual mean=-0.000015 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.189575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.59743e-05 Jy ! Component: 100 - total flux cleaned = 1.56733e-06 Jy ! Component: 150 - total flux cleaned = -2.18681e-05 Jy ! Component: 200 - total flux cleaned = -6.42279e-05 Jy ! Total flux subtracted in 200 components = -6.42279e-05 Jy ! Clean residual min=-0.002518 max=0.002290 Jy/beam ! Clean residual mean=-0.000017 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.18951 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 201 components and 0.18951 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.88 mas, bmaj=44.58 mas, bpa=-18.91 degrees ! Estimated noise=1186.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07064e-05 Jy ! Component: 100 - total flux cleaned = 5.72272e-05 Jy ! Component: 150 - total flux cleaned = 3.29867e-05 Jy ! Component: 200 - total flux cleaned = 1.02019e-05 Jy ! Total flux subtracted in 200 components = 1.02019e-05 Jy ! Clean residual min=-0.002708 max=0.002186 Jy/beam ! Clean residual mean=-0.000012 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.189521 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 216 components and 0.18952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101403Jy sigma=0.000618 ! Fit after self-cal, rms=0.101378Jy sigma=0.000618 wmodel J1532-3732_S_2017_09_26_pus_map.mod ! Writing 216 model components to file: J1532-3732_S_2017_09_26_pus_map.mod wobs J1532-3732_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1532-3732_S_2017_09_26_pus_uvs.fits wwins J1532-3732_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1532-3732_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011032 Jy ! Component: 100 - total flux cleaned = -0.00170679 Jy ! Component: 150 - total flux cleaned = -0.00194697 Jy ! Component: 200 - total flux cleaned = -0.00200168 Jy ! Component: 250 - total flux cleaned = -0.00195568 Jy ! Component: 300 - total flux cleaned = -0.00195559 Jy ! Component: 350 - total flux cleaned = -0.00191444 Jy ! Component: 400 - total flux cleaned = -0.0020331 Jy ! Component: 450 - total flux cleaned = -0.00214506 Jy ! Component: 500 - total flux cleaned = -0.00227091 Jy ! Component: 550 - total flux cleaned = -0.00240879 Jy ! Component: 600 - total flux cleaned = -0.00252514 Jy ! Component: 650 - total flux cleaned = -0.00265335 Jy ! Component: 700 - total flux cleaned = -0.00279351 Jy ! Component: 750 - total flux cleaned = -0.00289942 Jy ! Component: 800 - total flux cleaned = -0.00298752 Jy ! Component: 850 - total flux cleaned = -0.00310255 Jy ! Component: 900 - total flux cleaned = -0.00321474 Jy ! Component: 950 - total flux cleaned = -0.00331058 Jy ! Component: 1000 - total flux cleaned = -0.00339037 Jy ! Component: 1050 - total flux cleaned = -0.00348095 Jy ! Component: 1100 - total flux cleaned = -0.0035695 Jy ! Component: 1150 - total flux cleaned = -0.00363147 Jy ! Component: 1200 - total flux cleaned = -0.00369263 Jy ! Component: 1250 - total flux cleaned = -0.00376433 Jy ! Component: 1300 - total flux cleaned = -0.0037994 Jy ! Component: 1350 - total flux cleaned = -0.00384546 Jy ! Component: 1400 - total flux cleaned = -0.00391372 Jy ! Component: 1450 - total flux cleaned = -0.00398114 Jy ! Component: 1500 - total flux cleaned = -0.0040367 Jy ! Component: 1550 - total flux cleaned = -0.00408053 Jy ! Component: 1600 - total flux cleaned = -0.00410233 Jy ! Component: 1650 - total flux cleaned = -0.00415635 Jy ! Component: 1700 - total flux cleaned = -0.00422069 Jy ! Component: 1750 - total flux cleaned = -0.00425263 Jy ! Component: 1800 - total flux cleaned = -0.00430558 Jy ! Component: 1850 - total flux cleaned = -0.00436878 Jy ! Component: 1900 - total flux cleaned = -0.00441064 Jy ! Component: 1950 - total flux cleaned = -0.00448355 Jy ! Component: 2000 - total flux cleaned = -0.00455609 Jy ! Component: 2050 - total flux cleaned = -0.00459737 Jy ! Component: 2100 - total flux cleaned = -0.0046592 Jy ! Component: 2150 - total flux cleaned = -0.00470027 Jy ! Component: 2200 - total flux cleaned = -0.00474133 Jy ! Component: 2250 - total flux cleaned = -0.00480264 Jy ! Component: 2300 - total flux cleaned = -0.00483315 Jy ! Component: 2350 - total flux cleaned = -0.00487374 Jy ! Component: 2400 - total flux cleaned = -0.00489402 Jy ! Component: 2450 - total flux cleaned = -0.00492441 Jy ! Component: 2500 - total flux cleaned = -0.00493454 Jy ! Component: 2550 - total flux cleaned = -0.00495474 Jy ! Component: 2600 - total flux cleaned = -0.00494454 Jy ! Component: 2650 - total flux cleaned = -0.0049344 Jy ! Component: 2700 - total flux cleaned = -0.00496484 Jy ! Component: 2750 - total flux cleaned = -0.00497496 Jy ! Component: 2800 - total flux cleaned = -0.00497493 Jy ! Component: 2850 - total flux cleaned = -0.00500559 Jy ! Component: 2900 - total flux cleaned = -0.00504672 Jy ! Component: 2950 - total flux cleaned = -0.00509829 Jy ! Component: 3000 - total flux cleaned = -0.00512939 Jy ! Component: 3050 - total flux cleaned = -0.00515034 Jy ! Component: 3100 - total flux cleaned = -0.00521381 Jy ! Component: 3150 - total flux cleaned = -0.0052245 Jy ! Component: 3200 - total flux cleaned = -0.00526758 Jy ! Component: 3250 - total flux cleaned = -0.00532203 Jy ! Component: 3300 - total flux cleaned = -0.00537718 Jy ! Component: 3350 - total flux cleaned = -0.00539943 Jy ! Component: 3400 - total flux cleaned = -0.00544444 Jy ! Component: 3450 - total flux cleaned = -0.00547863 Jy ! Component: 3500 - total flux cleaned = -0.00553632 Jy ! Component: 3550 - total flux cleaned = -0.00559483 Jy ! Component: 3600 - total flux cleaned = -0.00561849 Jy ! Component: 3650 - total flux cleaned = -0.0056661 Jy ! Component: 3700 - total flux cleaned = -0.00573869 Jy ! Component: 3750 - total flux cleaned = -0.00579993 Jy ! Component: 3800 - total flux cleaned = -0.0058619 Jy ! Component: 3850 - total flux cleaned = -0.00593712 Jy ! Component: 3900 - total flux cleaned = -0.0060388 Jy ! Component: 3950 - total flux cleaned = -0.00611627 Jy ! Component: 4000 - total flux cleaned = -0.00620792 Jy ! Component: 4050 - total flux cleaned = -0.00627431 Jy ! Total flux subtracted in 4096 components = -0.00634149 Jy ! Clean residual min=-0.000713 max=0.000716 Jy/beam ! Clean residual mean=0.000023 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.183179 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 468 components and 0.183179 Jy ![Exited script file: muppet] wmap "J1532-3732_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.88 x 44.58 at -18.91 degrees (North through East) ! Clean map min=-0.0018591 max=0.091133 Jy/beam ! Writing clean map to FITS file: J1532-3732_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0911333 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230705 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.759454 0.759454 1.51891 3.03782 6.07563 12.1513 24.3025 48.6051 97.2102 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.88 x 44.58 at -18.91 degrees (North through East) ! Clean map min=-0.0018591 max=0.091133 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1532-3732_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:02:41 2019