! Started logfile: J1532-3732_S_2017_06_10_pus_uvs.log on Mon May 6 14:57:22 2019 obs J1532-3732_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1532-3732_S_2017_06_10_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.538508 visibilities/baseline/integration-bin. ! Found source: J1532-3732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 14152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1532-3732_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 445 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 530 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 399 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1244 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941098Jy sigma=0.006566 ! Fit after self-cal, rms=0.903646Jy sigma=0.006291 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=6.57 mas, bpa=-2.832 degrees ! Estimated noise=2261.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0668811 Jy ! Component: 100 - total flux cleaned = 0.0965533 Jy ! Total flux subtracted in 100 components = 0.0965533 Jy ! Clean residual min=-0.010255 max=0.016725 Jy/beam ! Clean residual mean=-0.000244 rms=0.003526 Jy/beam ! Combined flux in latest and established models = 0.0965533 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0965533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106353Jy sigma=0.000730 ! Fit after self-cal, rms=0.106080Jy sigma=0.000727 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.923 mas, bpa=-2.391 degrees ! Estimated noise=1062.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298364 Jy ! Component: 100 - total flux cleaned = 0.0440244 Jy ! Component: 150 - total flux cleaned = 0.0508664 Jy ! Component: 200 - total flux cleaned = 0.0541803 Jy ! Total flux subtracted in 200 components = 0.0541803 Jy ! Clean residual min=-0.005918 max=0.012773 Jy/beam ! Clean residual mean=-0.000180 rms=0.002389 Jy/beam ! Combined flux in latest and established models = 0.150734 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 72 components and 0.150734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098944Jy sigma=0.000669 ! Fit after self-cal, rms=0.098882Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 1.05 ! LA 1.03 MK 1.06 NL 1.00* OV 1.09 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.03 ! LA 0.98 MK 1.04 NL 1.00* OV 1.11 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.00 ! LA 0.98 MK 1.04 NL 1.54 OV 1.04 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.098882Jy sigma=0.000668 ! Fit after self-cal, rms=0.107505Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=8.023 mas, bpa=-1.908 degrees ! Estimated noise=1088.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979263 Jy ! Component: 100 - total flux cleaned = 0.0137535 Jy ! Component: 150 - total flux cleaned = 0.0143949 Jy ! Component: 200 - total flux cleaned = 0.014707 Jy ! Total flux subtracted in 200 components = 0.014707 Jy ! Clean residual min=-0.004153 max=0.006317 Jy/beam ! Clean residual mean=-0.000060 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.165441 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 104 components and 0.165441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106633Jy sigma=0.000659 ! Fit after self-cal, rms=0.106594Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106594Jy sigma=0.000657 ! Fit after self-cal, rms=0.103057Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.962 mas, bpa=-1.634 degrees ! Estimated noise=1070.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513028 Jy ! Component: 100 - total flux cleaned = 0.00653281 Jy ! Component: 150 - total flux cleaned = 0.0068072 Jy ! Component: 200 - total flux cleaned = 0.00695519 Jy ! Total flux subtracted in 200 components = 0.00695519 Jy ! Clean residual min=-0.002984 max=0.004410 Jy/beam ! Clean residual mean=-0.000044 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.172396 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 0.172396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102789Jy sigma=0.000655 ! Fit after self-cal, rms=0.102575Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271988 Jy ! Component: 100 - total flux cleaned = 0.00298048 Jy ! Component: 150 - total flux cleaned = 0.00311972 Jy ! Component: 200 - total flux cleaned = 0.00319053 Jy ! Total flux subtracted in 200 components = 0.00319053 Jy ! Clean residual min=-0.003044 max=0.003624 Jy/beam ! Clean residual mean=-0.000031 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.175586 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 126 components and 0.175586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102473Jy sigma=0.000653 ! Fit after self-cal, rms=0.102416Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102416Jy sigma=0.000653 ! Fit after self-cal, rms=0.099572Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.891 mas, bpa=-1.357 degrees ! Estimated noise=1062.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186023 Jy ! Component: 100 - total flux cleaned = 0.00208258 Jy ! Component: 150 - total flux cleaned = 0.0021227 Jy ! Component: 200 - total flux cleaned = 0.0020956 Jy ! Total flux subtracted in 200 components = 0.0020956 Jy ! Clean residual min=-0.002611 max=0.002724 Jy/beam ! Clean residual mean=-0.000011 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.177682 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 136 components and 0.177682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099515Jy sigma=0.000652 ! Fit after self-cal, rms=0.099395Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105086 Jy ! Component: 100 - total flux cleaned = 0.0010554 Jy ! Component: 150 - total flux cleaned = 0.00102486 Jy ! Component: 200 - total flux cleaned = 0.000998105 Jy ! Total flux subtracted in 200 components = 0.000998105 Jy ! Clean residual min=-0.002606 max=0.002734 Jy/beam ! Clean residual mean=-0.000005 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.17868 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 143 components and 0.17868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099360Jy sigma=0.000651 ! Fit after self-cal, rms=0.099343Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099343Jy sigma=0.000651 ! Fit after self-cal, rms=0.097792Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.17 mas, bmaj=29.67 mas, bpa=1.421 degrees ! Estimated noise=1400.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175665 Jy ! Component: 100 - total flux cleaned = 0.00194367 Jy ! Component: 150 - total flux cleaned = 0.00192096 Jy ! Component: 200 - total flux cleaned = 0.00188116 Jy ! Total flux subtracted in 200 components = 0.00188116 Jy ! Clean residual min=-0.002777 max=0.003486 Jy/beam ! Clean residual mean=-0.000011 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.180561 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 150 components and 0.180561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097780Jy sigma=0.000651 ! Fit after self-cal, rms=0.097742Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578644 Jy ! Component: 100 - total flux cleaned = 0.000581718 Jy ! Component: 150 - total flux cleaned = 0.000563114 Jy ! Component: 200 - total flux cleaned = 0.000545617 Jy ! Total flux subtracted in 200 components = 0.000545617 Jy ! Clean residual min=-0.002738 max=0.003509 Jy/beam ! Clean residual mean=-0.000006 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.181107 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 153 components and 0.181107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097731Jy sigma=0.000651 ! Fit after self-cal, rms=0.097726Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.839 mas, bpa=-1.242 degrees ! Estimated noise=1055.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.888 x 7.839 at -1.242 degrees (North through East) ! Clean map min=-0.0023568 max=0.083933 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.257 mas, bmaj=6.508 mas, bpa=-1.907 degrees ! Estimated noise=2256.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655307 Jy ! Component: 100 - total flux cleaned = 0.0960009 Jy ! Component: 150 - total flux cleaned = 0.116283 Jy ! Component: 200 - total flux cleaned = 0.131035 Jy ! Total flux subtracted in 200 components = 0.131035 Jy ! Clean residual min=-0.007794 max=0.009746 Jy/beam ! Clean residual mean=-0.000122 rms=0.002385 Jy/beam ! Combined flux in latest and established models = 0.131035 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.131035 Jy ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.839 mas, bpa=-1.242 degrees ! Estimated noise=1055.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164955 Jy ! Component: 100 - total flux cleaned = 0.0264288 Jy ! Component: 150 - total flux cleaned = 0.0330023 Jy ! Component: 200 - total flux cleaned = 0.0374841 Jy ! Total flux subtracted in 200 components = 0.0374841 Jy ! Clean residual min=-0.002940 max=0.004021 Jy/beam ! Clean residual mean=-0.000048 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.168519 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 122 components and 0.168519 Jy ! Inverting map ! Added new window around map position (3.5, 41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401872 Jy ! Component: 100 - total flux cleaned = 0.00663493 Jy ! Component: 150 - total flux cleaned = 0.00854377 Jy ! Component: 200 - total flux cleaned = 0.00995755 Jy ! Total flux subtracted in 200 components = 0.00995755 Jy ! Clean residual min=-0.002494 max=0.002184 Jy/beam ! Clean residual mean=-0.000012 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.178476 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 164 components and 0.178476 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.17 mas, bmaj=29.67 mas, bpa=1.421 degrees ! Estimated noise=1400.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176158 Jy ! Component: 100 - total flux cleaned = 0.00279336 Jy ! Component: 150 - total flux cleaned = 0.00335518 Jy ! Component: 200 - total flux cleaned = 0.00351474 Jy ! Total flux subtracted in 200 components = 0.00351474 Jy ! Clean residual min=-0.002801 max=0.002485 Jy/beam ! Clean residual mean=0.000001 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.181991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163522 Jy ! Component: 100 - total flux cleaned = 0.00031065 Jy ! Component: 150 - total flux cleaned = 0.000411174 Jy ! Component: 200 - total flux cleaned = 0.000519595 Jy ! Total flux subtracted in 200 components = 0.000519595 Jy ! Clean residual min=-0.002774 max=0.002511 Jy/beam ! Clean residual mean=0.000005 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.182511 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 182 components and 0.182511 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.839 mas, bpa=-1.242 degrees ! Estimated noise=1055.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236417 Jy ! Component: 100 - total flux cleaned = 0.000301822 Jy ! Component: 150 - total flux cleaned = 0.000359902 Jy ! Component: 200 - total flux cleaned = 0.000394589 Jy ! Total flux subtracted in 200 components = 0.000394589 Jy ! Clean residual min=-0.002357 max=0.002231 Jy/beam ! Clean residual mean=0.000005 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.182905 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 196 components and 0.182905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097609Jy sigma=0.000651 ! Fit after self-cal, rms=0.097541Jy sigma=0.000650 wmodel J1532-3732_S_2017_06_10_pus_map.mod ! Writing 196 model components to file: J1532-3732_S_2017_06_10_pus_map.mod wobs J1532-3732_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1532-3732_S_2017_06_10_pus_uvs.fits wwins J1532-3732_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1532-3732_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000562743 Jy ! Component: 100 - total flux cleaned = -0.000866622 Jy ! Component: 150 - total flux cleaned = -0.00107605 Jy ! Component: 200 - total flux cleaned = -0.00117703 Jy ! Component: 250 - total flux cleaned = -0.00123934 Jy ! Component: 300 - total flux cleaned = -0.00114992 Jy ! Component: 350 - total flux cleaned = -0.00106442 Jy ! Component: 400 - total flux cleaned = -0.000981184 Jy ! Component: 450 - total flux cleaned = -0.000820189 Jy ! Component: 500 - total flux cleaned = -0.000664996 Jy ! Component: 550 - total flux cleaned = -0.000564178 Jy ! Component: 600 - total flux cleaned = -0.000441461 Jy ! Component: 650 - total flux cleaned = -0.000441543 Jy ! Component: 700 - total flux cleaned = -0.000346982 Jy ! Component: 750 - total flux cleaned = -0.000323788 Jy ! Component: 800 - total flux cleaned = -0.000301008 Jy ! Component: 850 - total flux cleaned = -0.000300642 Jy ! Component: 900 - total flux cleaned = -0.000278485 Jy ! Component: 950 - total flux cleaned = -0.000236223 Jy ! Component: 1000 - total flux cleaned = -0.000215151 Jy ! Component: 1050 - total flux cleaned = -0.000174091 Jy ! Component: 1100 - total flux cleaned = -0.000194447 Jy ! Component: 1150 - total flux cleaned = -0.000174458 Jy ! Component: 1200 - total flux cleaned = -0.000193945 Jy ! Component: 1250 - total flux cleaned = -0.000117156 Jy ! Component: 1300 - total flux cleaned = -9.82973e-05 Jy ! Component: 1350 - total flux cleaned = -0.000135568 Jy ! Component: 1400 - total flux cleaned = -0.000117037 Jy ! Component: 1450 - total flux cleaned = -9.87487e-05 Jy ! Component: 1500 - total flux cleaned = -0.000134409 Jy ! Component: 1550 - total flux cleaned = -0.00013442 Jy ! Component: 1600 - total flux cleaned = -0.000151972 Jy ! Component: 1650 - total flux cleaned = -0.000186521 Jy ! Component: 1700 - total flux cleaned = -0.00020338 Jy ! Component: 1750 - total flux cleaned = -0.000169744 Jy ! Component: 1800 - total flux cleaned = -0.000186619 Jy ! Component: 1850 - total flux cleaned = -0.000219819 Jy ! Component: 1900 - total flux cleaned = -0.000219805 Jy ! Component: 1950 - total flux cleaned = -0.000235813 Jy ! Component: 2000 - total flux cleaned = -0.000219721 Jy ! Component: 2050 - total flux cleaned = -0.000235511 Jy ! Component: 2100 - total flux cleaned = -0.000266996 Jy ! Component: 2150 - total flux cleaned = -0.000313926 Jy ! Component: 2200 - total flux cleaned = -0.000329562 Jy ! Component: 2250 - total flux cleaned = -0.000360462 Jy ! Component: 2300 - total flux cleaned = -0.000360426 Jy ! Component: 2350 - total flux cleaned = -0.000421474 Jy ! Component: 2400 - total flux cleaned = -0.00043653 Jy ! Component: 2450 - total flux cleaned = -0.000481748 Jy ! Component: 2500 - total flux cleaned = -0.000511639 Jy ! Component: 2550 - total flux cleaned = -0.000526426 Jy ! Component: 2600 - total flux cleaned = -0.000600321 Jy ! Component: 2650 - total flux cleaned = -0.00062966 Jy ! Component: 2700 - total flux cleaned = -0.000688152 Jy ! Component: 2750 - total flux cleaned = -0.000760791 Jy ! Component: 2800 - total flux cleaned = -0.000789687 Jy ! Component: 2850 - total flux cleaned = -0.000818566 Jy ! Component: 2900 - total flux cleaned = -0.000861471 Jy ! Component: 2950 - total flux cleaned = -0.000918541 Jy ! Component: 3000 - total flux cleaned = -0.00100362 Jy ! Component: 3050 - total flux cleaned = -0.00105988 Jy ! Component: 3100 - total flux cleaned = -0.00110191 Jy ! Component: 3150 - total flux cleaned = -0.00115772 Jy ! Component: 3200 - total flux cleaned = -0.00119948 Jy ! Component: 3250 - total flux cleaned = -0.00125479 Jy ! Component: 3300 - total flux cleaned = -0.00126861 Jy ! Component: 3350 - total flux cleaned = -0.00130979 Jy ! Component: 3400 - total flux cleaned = -0.00135076 Jy ! Component: 3450 - total flux cleaned = -0.00140514 Jy ! Component: 3500 - total flux cleaned = -0.00145934 Jy ! Component: 3550 - total flux cleaned = -0.00148635 Jy ! Component: 3600 - total flux cleaned = -0.0015133 Jy ! Component: 3650 - total flux cleaned = -0.00154021 Jy ! Component: 3700 - total flux cleaned = -0.00156708 Jy ! Component: 3750 - total flux cleaned = -0.0015938 Jy ! Component: 3800 - total flux cleaned = -0.00163385 Jy ! Component: 3850 - total flux cleaned = -0.00163387 Jy ! Component: 3900 - total flux cleaned = -0.00166041 Jy ! Component: 3950 - total flux cleaned = -0.00167365 Jy ! Component: 4000 - total flux cleaned = -0.0017134 Jy ! Component: 4050 - total flux cleaned = -0.00173993 Jy ! Total flux subtracted in 4096 components = -0.00177962 Jy ! Clean residual min=-0.000851 max=0.000774 Jy/beam ! Clean residual mean=0.000007 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.181126 Jy keep ! Adding 218 model components to the UV plane model. ! The established model now contains 414 components and 0.181126 Jy ![Exited script file: muppet] wmap "J1532-3732_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.888 x 7.839 at -1.242 degrees (North through East) ! Clean map min=-0.0017914 max=0.081778 Jy/beam ! Writing clean map to FITS file: J1532-3732_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0817784 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226065 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.829308 0.829308 1.65862 3.31723 6.63446 13.2689 26.5378 53.0757 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.888 x 7.839 at -1.242 degrees (North through East) ! Clean map min=-0.0017914 max=0.081778 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1532-3732_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:27 2019