! Started logfile: J1532+2344_S_2017_01_21_pus_uvs.log on Sun May 5 15:57:12 2019 obs J1532+2344_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1532+2344_S_2017_01_21_pus_uva.fits ! AN table 1: 100 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.683611 visibilities/baseline/integration-bin. ! Found source: J1532+2344 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 9844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1532+2344_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 335 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938752Jy sigma=0.007065 ! Fit after self-cal, rms=0.918307Jy sigma=0.006969 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=5.502 mas, bpa=-2.852 degrees ! Estimated noise=1413.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680275 Jy ! Component: 100 - total flux cleaned = 0.0830123 Jy ! Total flux subtracted in 100 components = 0.0830123 Jy ! Clean residual min=-0.004343 max=0.005225 Jy/beam ! Clean residual mean=-0.000001 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.0830123 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0830123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103505Jy sigma=0.000654 ! Fit after self-cal, rms=0.103323Jy sigma=0.000654 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=6.361 mas, bpa=-2.374 degrees ! Estimated noise=1034.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614721 Jy ! Component: 100 - total flux cleaned = 0.00943629 Jy ! Component: 150 - total flux cleaned = 0.0114102 Jy ! Component: 200 - total flux cleaned = 0.0121413 Jy ! Total flux subtracted in 200 components = 0.0121413 Jy ! Clean residual min=-0.003621 max=0.003702 Jy/beam ! Clean residual mean=0.000002 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.0951536 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.0951536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103052Jy sigma=0.000650 ! Fit after self-cal, rms=0.103085Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.89 LA 0.97 ! MK 0.97 NL 0.96 OV 1.09 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.96 LA 1.00 ! MK 1.17 NL 1.00 OV 1.10 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.14 LA 0.96 ! MK 1.03 NL 0.96 OV 0.99 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.98 LA 1.00 ! MK 0.90 NL 1.00* OV 0.97 PT 1.02 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.103085Jy sigma=0.000650 ! Fit after self-cal, rms=0.104516Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=6.396 mas, bpa=-2.424 degrees ! Estimated noise=1029.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000697429 Jy ! Component: 100 - total flux cleaned = -0.000637859 Jy ! Component: 150 - total flux cleaned = -0.000562275 Jy ! Component: 200 - total flux cleaned = -0.00051704 Jy ! Total flux subtracted in 200 components = -0.00051704 Jy ! Clean residual min=-0.003412 max=0.003208 Jy/beam ! Clean residual mean=0.000002 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0946366 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0946366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104492Jy sigma=0.000648 ! Fit after self-cal, rms=0.104599Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104599Jy sigma=0.000648 ! Fit after self-cal, rms=0.117925Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=6.389 mas, bpa=-2.839 degrees ! Estimated noise=1033.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000675119 Jy ! Component: 100 - total flux cleaned = -0.000695005 Jy ! Component: 150 - total flux cleaned = -0.000748682 Jy ! Component: 200 - total flux cleaned = -0.000797117 Jy ! Total flux subtracted in 200 components = -0.000797117 Jy ! Clean residual min=-0.002304 max=0.002872 Jy/beam ! Clean residual mean=0.000002 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0938394 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0938394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117916Jy sigma=0.000642 ! Fit after self-cal, rms=0.118372Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023233 Jy ! Component: 100 - total flux cleaned = 0.00251966 Jy ! Component: 150 - total flux cleaned = 0.00269567 Jy ! Component: 200 - total flux cleaned = 0.00284074 Jy ! Total flux subtracted in 200 components = 0.00284074 Jy ! Clean residual min=-0.002121 max=0.002483 Jy/beam ! Clean residual mean=0.000002 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0966802 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.0966802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118310Jy sigma=0.000641 ! Fit after self-cal, rms=0.118309Jy sigma=0.000641 ! Inverting map ! Added new window around map position (-117.5, 111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020535 Jy ! Component: 100 - total flux cleaned = 0.00258868 Jy ! Component: 150 - total flux cleaned = 0.00285647 Jy ! Component: 200 - total flux cleaned = 0.00301423 Jy ! Total flux subtracted in 200 components = 0.00301423 Jy ! Clean residual min=-0.001968 max=0.002241 Jy/beam ! Clean residual mean=-0.000001 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0996944 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.0996944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118239Jy sigma=0.000641 ! Fit after self-cal, rms=0.118223Jy sigma=0.000641 ! Inverting map ! Added new window around map position (-97.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012336 Jy ! Component: 100 - total flux cleaned = 0.00170155 Jy ! Component: 150 - total flux cleaned = 0.00213596 Jy ! Component: 200 - total flux cleaned = 0.00239787 Jy ! Total flux subtracted in 200 components = 0.00239787 Jy ! Clean residual min=-0.002070 max=0.001975 Jy/beam ! Clean residual mean=-0.000001 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.102092 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 0.102092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118168Jy sigma=0.000640 ! Fit after self-cal, rms=0.118174Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118174Jy sigma=0.000640 ! Fit after self-cal, rms=0.119802Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=6.39 mas, bpa=-2.979 degrees ! Estimated noise=1030.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140758 Jy ! Component: 100 - total flux cleaned = 0.00177962 Jy ! Component: 150 - total flux cleaned = 0.0020317 Jy ! Component: 200 - total flux cleaned = 0.00216605 Jy ! Total flux subtracted in 200 components = 0.00216605 Jy ! Clean residual min=-0.001898 max=0.001802 Jy/beam ! Clean residual mean=-0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.104258 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 102 components and 0.104258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119768Jy sigma=0.000640 ! Fit after self-cal, rms=0.119827Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551257 Jy ! Component: 100 - total flux cleaned = 0.000614884 Jy ! Component: 150 - total flux cleaned = 0.000704531 Jy ! Component: 200 - total flux cleaned = 0.000704104 Jy ! Total flux subtracted in 200 components = 0.000704104 Jy ! Clean residual min=-0.001922 max=0.001825 Jy/beam ! Clean residual mean=-0.000001 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.104962 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 107 components and 0.104962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119808Jy sigma=0.000640 ! Fit after self-cal, rms=0.119817Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119817Jy sigma=0.000640 ! Fit after self-cal, rms=0.119822Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.728 mas, bmaj=9.991 mas, bpa=0.7795 degrees ! Estimated noise=1303.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.2852e-06 Jy ! Component: 100 - total flux cleaned = 7.5054e-05 Jy ! Component: 150 - total flux cleaned = -1.61954e-06 Jy ! Component: 200 - total flux cleaned = -9.14609e-05 Jy ! Total flux subtracted in 200 components = -9.14609e-05 Jy ! Clean residual min=-0.002028 max=0.002067 Jy/beam ! Clean residual mean=-0.000002 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.104871 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.104871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119817Jy sigma=0.000639 ! Fit after self-cal, rms=0.119829Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.36373e-05 Jy ! Component: 100 - total flux cleaned = -3.28872e-05 Jy ! Component: 150 - total flux cleaned = 4.89871e-06 Jy ! Component: 200 - total flux cleaned = 2.13939e-05 Jy ! Total flux subtracted in 200 components = 2.13939e-05 Jy ! Clean residual min=-0.002015 max=0.002077 Jy/beam ! Clean residual mean=-0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.104892 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 140 components and 0.104892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119827Jy sigma=0.000639 ! Fit after self-cal, rms=0.119830Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=6.395 mas, bpa=-3.027 degrees ! Estimated noise=1028.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 6.395 at -3.027 degrees (North through East) ! Clean map min=-0.0019054 max=0.0873 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=5.519 mas, bpa=-3.652 degrees ! Estimated noise=1413.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.067618 Jy ! Component: 100 - total flux cleaned = 0.0825642 Jy ! Component: 150 - total flux cleaned = 0.0863851 Jy ! Component: 200 - total flux cleaned = 0.0896233 Jy ! Total flux subtracted in 200 components = 0.0896233 Jy ! Clean residual min=-0.003407 max=0.003450 Jy/beam ! Clean residual mean=0.000001 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0896233 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0896233 Jy ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=6.395 mas, bpa=-3.027 degrees ! Estimated noise=1028.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004049 Jy ! Component: 100 - total flux cleaned = 0.00679129 Jy ! Component: 150 - total flux cleaned = 0.00808506 Jy ! Component: 200 - total flux cleaned = 0.00921615 Jy ! Total flux subtracted in 200 components = 0.00921615 Jy ! Clean residual min=-0.002263 max=0.002290 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0988394 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.0988394 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.728 mas, bmaj=9.991 mas, bpa=0.7795 degrees ! Estimated noise=1303.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134013 Jy ! Component: 100 - total flux cleaned = 0.00218764 Jy ! Component: 150 - total flux cleaned = 0.0027763 Jy ! Component: 200 - total flux cleaned = 0.00328804 Jy ! Total flux subtracted in 200 components = 0.00328804 Jy ! Clean residual min=-0.002438 max=0.001932 Jy/beam ! Clean residual mean=0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.102127 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541012 Jy ! Component: 100 - total flux cleaned = 0.000863226 Jy ! Component: 150 - total flux cleaned = 0.00111826 Jy ! Component: 200 - total flux cleaned = 0.00125229 Jy ! Total flux subtracted in 200 components = 0.00125229 Jy ! Clean residual min=-0.002247 max=0.001984 Jy/beam ! Clean residual mean=-0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.10338 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 102 components and 0.10338 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=6.395 mas, bpa=-3.027 degrees ! Estimated noise=1028.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103315 Jy ! Component: 100 - total flux cleaned = 0.000131372 Jy ! Component: 150 - total flux cleaned = 0.000335114 Jy ! Component: 200 - total flux cleaned = 0.000522303 Jy ! Total flux subtracted in 200 components = 0.000522303 Jy ! Clean residual min=-0.002067 max=0.001823 Jy/beam ! Clean residual mean=-0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.103902 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 122 components and 0.103902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119881Jy sigma=0.000640 ! Fit after self-cal, rms=0.119871Jy sigma=0.000640 wmodel J1532+2344_S_2017_01_21_pus_map.mod ! Writing 122 model components to file: J1532+2344_S_2017_01_21_pus_map.mod wobs J1532+2344_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1532+2344_S_2017_01_21_pus_uvs.fits wwins J1532+2344_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1532+2344_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623391 Jy ! Component: 100 - total flux cleaned = -0.000756329 Jy ! Component: 150 - total flux cleaned = -0.000852635 Jy ! Component: 200 - total flux cleaned = -0.000914069 Jy ! Component: 250 - total flux cleaned = -0.000883834 Jy ! Component: 300 - total flux cleaned = -0.000942513 Jy ! Component: 350 - total flux cleaned = -0.000914796 Jy ! Component: 400 - total flux cleaned = -0.000969661 Jy ! Component: 450 - total flux cleaned = -0.000969672 Jy ! Component: 500 - total flux cleaned = -0.00102225 Jy ! Component: 550 - total flux cleaned = -0.000944685 Jy ! Component: 600 - total flux cleaned = -0.000894688 Jy ! Component: 650 - total flux cleaned = -0.00086998 Jy ! Component: 700 - total flux cleaned = -0.000820955 Jy ! Component: 750 - total flux cleaned = -0.000772669 Jy ! Component: 800 - total flux cleaned = -0.000654467 Jy ! Component: 850 - total flux cleaned = -0.000515384 Jy ! Component: 900 - total flux cleaned = -0.000424053 Jy ! Component: 950 - total flux cleaned = -0.000334062 Jy ! Component: 1000 - total flux cleaned = -0.000311925 Jy ! Component: 1050 - total flux cleaned = -0.000311768 Jy ! Component: 1100 - total flux cleaned = -0.000333089 Jy ! Component: 1150 - total flux cleaned = -0.000225682 Jy ! Component: 1200 - total flux cleaned = -0.000119517 Jy ! Component: 1250 - total flux cleaned = -9.85373e-05 Jy ! Component: 1300 - total flux cleaned = -3.66366e-05 Jy ! Component: 1350 - total flux cleaned = -5.70639e-05 Jy ! Component: 1400 - total flux cleaned = -1.67217e-05 Jy ! Component: 1450 - total flux cleaned = 4.30961e-05 Jy ! Component: 1500 - total flux cleaned = 4.31525e-05 Jy ! Component: 1550 - total flux cleaned = 0.00010192 Jy ! Component: 1600 - total flux cleaned = 0.000179194 Jy ! Component: 1650 - total flux cleaned = 0.000179235 Jy ! Component: 1700 - total flux cleaned = 0.000217268 Jy ! Component: 1750 - total flux cleaned = 0.000198637 Jy ! Component: 1800 - total flux cleaned = 0.000217272 Jy ! Component: 1850 - total flux cleaned = 0.000290916 Jy ! Component: 1900 - total flux cleaned = 0.000327623 Jy ! Component: 1950 - total flux cleaned = 0.000363678 Jy ! Component: 2000 - total flux cleaned = 0.000399565 Jy ! Component: 2050 - total flux cleaned = 0.000399629 Jy ! Component: 2100 - total flux cleaned = 0.0004703 Jy ! Component: 2150 - total flux cleaned = 0.000488021 Jy ! Component: 2200 - total flux cleaned = 0.000540104 Jy ! Component: 2250 - total flux cleaned = 0.000591847 Jy ! Component: 2300 - total flux cleaned = 0.000626151 Jy ! Component: 2350 - total flux cleaned = 0.000592472 Jy ! Component: 2400 - total flux cleaned = 0.000676288 Jy ! Component: 2450 - total flux cleaned = 0.000642996 Jy ! Component: 2500 - total flux cleaned = 0.000659656 Jy ! Component: 2550 - total flux cleaned = 0.000692539 Jy ! Component: 2600 - total flux cleaned = 0.000708984 Jy ! Component: 2650 - total flux cleaned = 0.000628026 Jy ! Component: 2700 - total flux cleaned = 0.000612022 Jy ! Component: 2750 - total flux cleaned = 0.000563997 Jy ! Component: 2800 - total flux cleaned = 0.000611603 Jy ! Component: 2850 - total flux cleaned = 0.000501346 Jy ! Component: 2900 - total flux cleaned = 0.000470154 Jy ! Component: 2950 - total flux cleaned = 0.000485731 Jy ! Component: 3000 - total flux cleaned = 0.000501212 Jy ! Component: 3050 - total flux cleaned = 0.000531951 Jy ! Component: 3100 - total flux cleaned = 0.000470785 Jy ! Component: 3150 - total flux cleaned = 0.000455661 Jy ! Component: 3200 - total flux cleaned = 0.000425329 Jy ! Component: 3250 - total flux cleaned = 0.000425359 Jy ! Component: 3300 - total flux cleaned = 0.000395419 Jy ! Component: 3350 - total flux cleaned = 0.000350945 Jy ! Component: 3400 - total flux cleaned = 0.000277231 Jy ! Component: 3450 - total flux cleaned = 0.000262532 Jy ! Component: 3500 - total flux cleaned = 0.000262576 Jy ! Component: 3550 - total flux cleaned = 0.00017556 Jy ! Component: 3600 - total flux cleaned = 0.00020439 Jy ! Component: 3650 - total flux cleaned = 0.000146933 Jy ! Component: 3700 - total flux cleaned = 0.000118343 Jy ! Component: 3750 - total flux cleaned = 6.15079e-05 Jy ! Component: 3800 - total flux cleaned = 5.06521e-06 Jy ! Component: 3850 - total flux cleaned = -6.50848e-05 Jy ! Component: 3900 - total flux cleaned = -7.90507e-05 Jy ! Component: 3950 - total flux cleaned = -0.000106844 Jy ! Component: 4000 - total flux cleaned = -0.000189953 Jy ! Component: 4050 - total flux cleaned = -0.000203594 Jy ! Total flux subtracted in 4096 components = -0.000244666 Jy ! Clean residual min=-0.000785 max=0.000838 Jy/beam ! Clean residual mean=-0.000003 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.103657 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 394 components and 0.103657 Jy ![Exited script file: muppet] wmap "J1532+2344_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 6.395 at -3.027 degrees (North through East) ! Clean map min=-0.001784 max=0.087389 Jy/beam ! Writing clean map to FITS file: J1532+2344_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0873891 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000243079 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.834473 0.834473 1.66895 3.33789 6.67578 13.3516 26.7031 53.4063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 6.395 at -3.027 degrees (North through East) ! Clean map min=-0.001784 max=0.087389 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1532+2344_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:57:17 2019