! Started logfile: J1530-1950_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:10 2019 obs J1530-1950_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1530-1950_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.864943 visibilities/baseline/integration-bin. ! Found source: J1530-1950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18060 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1530-1950_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 287 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 287 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 664 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932356Jy sigma=0.007439 ! Fit after self-cal, rms=0.884316Jy sigma=0.007063 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=12.68 mas, bpa=-20.58 degrees ! Estimated noise=1622.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850277 Jy ! Component: 100 - total flux cleaned = 0.109184 Jy ! Total flux subtracted in 100 components = 0.109184 Jy ! Clean residual min=-0.007282 max=0.010519 Jy/beam ! Clean residual mean=0.000017 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.109184 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.109184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102557Jy sigma=0.000737 ! Fit after self-cal, rms=0.102317Jy sigma=0.000735 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=15.73 mas, bpa=-18.06 degrees ! Estimated noise=842.521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140935 Jy ! Component: 100 - total flux cleaned = 0.0194537 Jy ! Component: 150 - total flux cleaned = 0.0223151 Jy ! Component: 200 - total flux cleaned = 0.0239365 Jy ! Total flux subtracted in 200 components = 0.0239365 Jy ! Clean residual min=-0.003977 max=0.004345 Jy/beam ! Clean residual mean=0.000038 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.13312 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.13312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100207Jy sigma=0.000722 ! Fit after self-cal, rms=0.100191Jy sigma=0.000721 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.94 HN 0.95 KP 1.11 ! LA 1.05 MK 1.05 NL 1.00 OV 0.96 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 1.07 ! LA 1.00 MK 0.99 NL 1.10 OV 0.98 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.02 KP 1.07 ! LA 0.79 MK 0.99 NL 1.18 OV 0.91 ! PT 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.94 KP 1.00* ! LA 0.74 MK 1.02 NL 1.00* OV 1.00* ! PT 0.94 ! ! ! Fit before self-cal, rms=0.100191Jy sigma=0.000721 ! Fit after self-cal, rms=0.097991Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=15.83 mas, bpa=-18.05 degrees ! Estimated noise=844.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133799 Jy ! Component: 100 - total flux cleaned = -0.00138705 Jy ! Component: 150 - total flux cleaned = -0.00134451 Jy ! Component: 200 - total flux cleaned = -0.0013471 Jy ! Total flux subtracted in 200 components = -0.0013471 Jy ! Clean residual min=-0.002803 max=0.003295 Jy/beam ! Clean residual mean=0.000009 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.131773 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.131773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097930Jy sigma=0.000714 ! Fit after self-cal, rms=0.097883Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097883Jy sigma=0.000713 ! Fit after self-cal, rms=0.101896Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=15.97 mas, bpa=-18.11 degrees ! Estimated noise=843.173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225167 Jy ! Component: 100 - total flux cleaned = -0.000243485 Jy ! Component: 150 - total flux cleaned = -0.000260048 Jy ! Component: 200 - total flux cleaned = -0.000260216 Jy ! Total flux subtracted in 200 components = -0.000260216 Jy ! Clean residual min=-0.002332 max=0.002242 Jy/beam ! Clean residual mean=0.000009 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.131513 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.131513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101889Jy sigma=0.000709 ! Fit after self-cal, rms=0.102001Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.46586e-06 Jy ! Component: 100 - total flux cleaned = -8.73471e-06 Jy ! Component: 150 - total flux cleaned = -2.23714e-05 Jy ! Component: 200 - total flux cleaned = -2.26118e-05 Jy ! Total flux subtracted in 200 components = -2.26118e-05 Jy ! Clean residual min=-0.002332 max=0.002189 Jy/beam ! Clean residual mean=0.000009 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.13149 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.13149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101996Jy sigma=0.000709 ! Fit after self-cal, rms=0.102000Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102000Jy sigma=0.000709 ! Fit after self-cal, rms=0.102576Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=15.98 mas, bpa=-18.13 degrees ! Estimated noise=842.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.7297e-05 Jy ! Component: 100 - total flux cleaned = -0.000112252 Jy ! Component: 150 - total flux cleaned = -0.000125833 Jy ! Component: 200 - total flux cleaned = -0.000138569 Jy ! Total flux subtracted in 200 components = -0.000138569 Jy ! Clean residual min=-0.002321 max=0.002204 Jy/beam ! Clean residual mean=0.000009 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.131352 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.131352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102572Jy sigma=0.000709 ! Fit after self-cal, rms=0.102580Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.31712e-06 Jy ! Component: 100 - total flux cleaned = -6.0377e-06 Jy ! Component: 150 - total flux cleaned = -1.72853e-05 Jy ! Component: 200 - total flux cleaned = -2.82765e-05 Jy ! Total flux subtracted in 200 components = -2.82765e-05 Jy ! Clean residual min=-0.002326 max=0.002194 Jy/beam ! Clean residual mean=0.000009 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.131323 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.131323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102577Jy sigma=0.000709 ! Fit after self-cal, rms=0.102579Jy sigma=0.000709 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102579Jy sigma=0.000709 ! Fit after self-cal, rms=0.102774Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.707 mas, bmaj=22.81 mas, bpa=-10.59 degrees ! Estimated noise=1003.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.80628e-05 Jy ! Component: 100 - total flux cleaned = -5.1039e-05 Jy ! Component: 150 - total flux cleaned = -7.41219e-05 Jy ! Component: 200 - total flux cleaned = -8.14268e-05 Jy ! Total flux subtracted in 200 components = -8.14268e-05 Jy ! Clean residual min=-0.002845 max=0.002060 Jy/beam ! Clean residual mean=0.000015 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.131242 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 88 components and 0.131242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102773Jy sigma=0.000709 ! Fit after self-cal, rms=0.102774Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.8543e-05 Jy ! Component: 100 - total flux cleaned = -6.13448e-05 Jy ! Component: 150 - total flux cleaned = -6.71594e-05 Jy ! Component: 200 - total flux cleaned = -7.27778e-05 Jy ! Total flux subtracted in 200 components = -7.27778e-05 Jy ! Clean residual min=-0.002832 max=0.002076 Jy/beam ! Clean residual mean=0.000015 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.131169 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 91 components and 0.131169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102774Jy sigma=0.000709 ! Fit after self-cal, rms=0.102774Jy sigma=0.000709 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=15.98 mas, bpa=-18.15 degrees ! Estimated noise=842.571 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.647 x 15.98 at -18.15 degrees (North through East) ! Clean map min=-0.0022487 max=0.1174 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=13.08 mas, bpa=-20.21 degrees ! Estimated noise=1706.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0889116 Jy ! Component: 100 - total flux cleaned = 0.112739 Jy ! Component: 150 - total flux cleaned = 0.121109 Jy ! Component: 200 - total flux cleaned = 0.12513 Jy ! Total flux subtracted in 200 components = 0.12513 Jy ! Clean residual min=-0.004726 max=0.004959 Jy/beam ! Clean residual mean=0.000006 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.12513 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.12513 Jy ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=15.98 mas, bpa=-18.15 degrees ! Estimated noise=842.571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356537 Jy ! Component: 100 - total flux cleaned = 0.00505488 Jy ! Component: 150 - total flux cleaned = 0.00548463 Jy ! Component: 200 - total flux cleaned = 0.0056379 Jy ! Total flux subtracted in 200 components = 0.0056379 Jy ! Clean residual min=-0.002268 max=0.002338 Jy/beam ! Clean residual mean=0.000009 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.130768 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.130768 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.707 mas, bmaj=22.81 mas, bpa=-10.59 degrees ! Estimated noise=1003.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386401 Jy ! Component: 100 - total flux cleaned = 0.000441745 Jy ! Component: 150 - total flux cleaned = 0.000452099 Jy ! Component: 200 - total flux cleaned = 0.000469617 Jy ! Total flux subtracted in 200 components = 0.000469617 Jy ! Clean residual min=-0.002759 max=0.002138 Jy/beam ! Clean residual mean=0.000015 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.131237 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.22869e-06 Jy ! Component: 100 - total flux cleaned = 1.36587e-05 Jy ! Component: 150 - total flux cleaned = 1.93604e-05 Jy ! Component: 200 - total flux cleaned = 2.41346e-05 Jy ! Total flux subtracted in 200 components = 2.41346e-05 Jy ! Clean residual min=-0.002761 max=0.002114 Jy/beam ! Clean residual mean=0.000015 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.131262 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.131262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=15.98 mas, bpa=-18.15 degrees ! Estimated noise=842.571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.20144e-05 Jy ! Component: 100 - total flux cleaned = -6.27332e-05 Jy ! Component: 150 - total flux cleaned = -2.77502e-05 Jy ! Component: 200 - total flux cleaned = -2.81729e-05 Jy ! Total flux subtracted in 200 components = -2.81729e-05 Jy ! Clean residual min=-0.002265 max=0.002238 Jy/beam ! Clean residual mean=0.000009 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.131233 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.131233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102783Jy sigma=0.000709 ! Fit after self-cal, rms=0.102775Jy sigma=0.000709 wmodel J1530-1950_S_2017_10_21_pus_map.mod ! Writing 68 model components to file: J1530-1950_S_2017_10_21_pus_map.mod wobs J1530-1950_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1530-1950_S_2017_10_21_pus_uvs.fits wwins J1530-1950_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1530-1950_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.84578e-05 Jy ! Component: 100 - total flux cleaned = -0.000236329 Jy ! Component: 150 - total flux cleaned = -0.000338774 Jy ! Component: 200 - total flux cleaned = -0.00046503 Jy ! Component: 250 - total flux cleaned = -0.000494874 Jy ! Component: 300 - total flux cleaned = -0.000609614 Jy ! Component: 350 - total flux cleaned = -0.000692767 Jy ! Component: 400 - total flux cleaned = -0.00071991 Jy ! Component: 450 - total flux cleaned = -0.000773155 Jy ! Component: 500 - total flux cleaned = -0.000774224 Jy ! Component: 550 - total flux cleaned = -0.000725513 Jy ! Component: 600 - total flux cleaned = -0.000629344 Jy ! Component: 650 - total flux cleaned = -0.000723747 Jy ! Component: 700 - total flux cleaned = -0.000722914 Jy ! Component: 750 - total flux cleaned = -0.000745006 Jy ! Component: 800 - total flux cleaned = -0.000744486 Jy ! Component: 850 - total flux cleaned = -0.000787636 Jy ! Component: 900 - total flux cleaned = -0.000808973 Jy ! Component: 950 - total flux cleaned = -0.000851739 Jy ! Component: 1000 - total flux cleaned = -0.000934862 Jy ! Component: 1050 - total flux cleaned = -0.000955747 Jy ! Component: 1100 - total flux cleaned = -0.00105617 Jy ! Component: 1150 - total flux cleaned = -0.00109537 Jy ! Component: 1200 - total flux cleaned = -0.00113457 Jy ! Component: 1250 - total flux cleaned = -0.00113437 Jy ! Component: 1300 - total flux cleaned = -0.00109633 Jy ! Component: 1350 - total flux cleaned = -0.00111499 Jy ! Component: 1400 - total flux cleaned = -0.00111505 Jy ! Component: 1450 - total flux cleaned = -0.00109693 Jy ! Component: 1500 - total flux cleaned = -0.00109696 Jy ! Component: 1550 - total flux cleaned = -0.00104392 Jy ! Component: 1600 - total flux cleaned = -0.00109661 Jy ! Component: 1650 - total flux cleaned = -0.00113112 Jy ! Component: 1700 - total flux cleaned = -0.00114811 Jy ! Component: 1750 - total flux cleaned = -0.00116482 Jy ! Component: 1800 - total flux cleaned = -0.00116488 Jy ! Component: 1850 - total flux cleaned = -0.00118139 Jy ! Component: 1900 - total flux cleaned = -0.00119782 Jy ! Component: 1950 - total flux cleaned = -0.00123017 Jy ! Component: 2000 - total flux cleaned = -0.00123007 Jy ! Component: 2050 - total flux cleaned = -0.00122993 Jy ! Component: 2100 - total flux cleaned = -0.00119833 Jy ! Component: 2150 - total flux cleaned = -0.00116725 Jy ! Component: 2200 - total flux cleaned = -0.00118273 Jy ! Component: 2250 - total flux cleaned = -0.00113663 Jy ! Component: 2300 - total flux cleaned = -0.00113673 Jy ! Component: 2350 - total flux cleaned = -0.0011671 Jy ! Component: 2400 - total flux cleaned = -0.00115208 Jy ! Component: 2450 - total flux cleaned = -0.00115214 Jy ! Component: 2500 - total flux cleaned = -0.00112254 Jy ! Component: 2550 - total flux cleaned = -0.00112253 Jy ! Component: 2600 - total flux cleaned = -0.00109323 Jy ! Component: 2650 - total flux cleaned = -0.00109313 Jy ! Component: 2700 - total flux cleaned = -0.00104957 Jy ! Component: 2750 - total flux cleaned = -0.00103519 Jy ! Component: 2800 - total flux cleaned = -0.0010353 Jy ! Component: 2850 - total flux cleaned = -0.00102101 Jy ! Component: 2900 - total flux cleaned = -0.00100686 Jy ! Component: 2950 - total flux cleaned = -0.000992696 Jy ! Component: 3000 - total flux cleaned = -0.000978535 Jy ! Component: 3050 - total flux cleaned = -0.000950517 Jy ! Component: 3100 - total flux cleaned = -0.000922467 Jy ! Component: 3150 - total flux cleaned = -0.000922492 Jy ! Component: 3200 - total flux cleaned = -0.000908631 Jy ! Component: 3250 - total flux cleaned = -0.000880804 Jy ! Component: 3300 - total flux cleaned = -0.000866929 Jy ! Component: 3350 - total flux cleaned = -0.0008256 Jy ! Component: 3400 - total flux cleaned = -0.000798121 Jy ! Component: 3450 - total flux cleaned = -0.000770701 Jy ! Component: 3500 - total flux cleaned = -0.000757153 Jy ! Component: 3550 - total flux cleaned = -0.000743485 Jy ! Component: 3600 - total flux cleaned = -0.000716325 Jy ! Component: 3650 - total flux cleaned = -0.000716287 Jy ! Component: 3700 - total flux cleaned = -0.000716273 Jy ! Component: 3750 - total flux cleaned = -0.000689216 Jy ! Component: 3800 - total flux cleaned = -0.000702795 Jy ! Component: 3850 - total flux cleaned = -0.00067589 Jy ! Component: 3900 - total flux cleaned = -0.000662469 Jy ! Component: 3950 - total flux cleaned = -0.000702786 Jy ! Component: 4000 - total flux cleaned = -0.000702684 Jy ! Component: 4050 - total flux cleaned = -0.000702656 Jy ! Total flux subtracted in 4096 components = -0.000716026 Jy ! Clean residual min=-0.000854 max=0.000820 Jy/beam ! Clean residual mean=-0.000006 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.130517 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 313 components and 0.130517 Jy ![Exited script file: muppet] wmap "J1530-1950_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.647 x 15.98 at -18.15 degrees (North through East) ! Clean map min=-0.0017727 max=0.1182 Jy/beam ! Writing clean map to FITS file: J1530-1950_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118196 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000234471 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.595122 0.595122 1.19024 2.38049 4.76098 9.52195 19.0439 38.0878 76.1756 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.647 x 15.98 at -18.15 degrees (North through East) ! Clean map min=-0.0017727 max=0.1182 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1530-1950_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:15 2019