! Started logfile: J1529-1904_S_2017_06_15_pus_uvs.log on Tue May 7 15:22:59 2019 obs J1529-1904_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1529-1904_S_2017_06_15_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764211 visibilities/baseline/integration-bin. ! Found source: J1529-1904 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 13068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1529-1904_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 803 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951800Jy sigma=0.006962 ! Fit after self-cal, rms=0.924052Jy sigma=0.006771 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=6.317 mas, bpa=-1.641 degrees ! Estimated noise=1685.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0577519 Jy ! Component: 100 - total flux cleaned = 0.0813862 Jy ! Total flux subtracted in 100 components = 0.0813862 Jy ! Clean residual min=-0.006972 max=0.013691 Jy/beam ! Clean residual mean=0.000027 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.0813862 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0813862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100869Jy sigma=0.000708 ! Fit after self-cal, rms=0.100481Jy sigma=0.000705 ! Inverting map ! Added new window around map position (3.5, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016041 Jy ! Component: 100 - total flux cleaned = 0.0250056 Jy ! Total flux subtracted in 100 components = 0.0250056 Jy ! Clean residual min=-0.006226 max=0.007807 Jy/beam ! Clean residual mean=0.000012 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.106392 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.106392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097624Jy sigma=0.000679 ! Fit after self-cal, rms=0.097415Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=7.877 mas, bpa=3.787 degrees ! Estimated noise=1042.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0085592 Jy ! Component: 100 - total flux cleaned = 0.0130576 Jy ! Component: 150 - total flux cleaned = 0.0158194 Jy ! Component: 200 - total flux cleaned = 0.0166098 Jy ! Total flux subtracted in 200 components = 0.0166098 Jy ! Clean residual min=-0.005539 max=0.006051 Jy/beam ! Clean residual mean=-0.000005 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.123002 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.123002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096748Jy sigma=0.000671 ! Fit after self-cal, rms=0.096661Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 HN 1.24 KP 0.98 ! LA 1.00 MK 0.82 NL 1.00 OV 1.02 ! PT 0.98 SC 0.82 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.36 KP 0.99 ! LA 0.92 MK 1.12 NL 1.17 OV 1.02 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 1.26 KP 0.96 ! LA 0.91 MK 0.86 NL 1.14 OV 0.92 ! PT 0.90 SC 0.83 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 0.93 KP 1.00* ! LA 1.00* MK 0.63 NL 1.00* OV 1.00* ! PT 0.80 SC 1.00* ! ! ! Fit before self-cal, rms=0.096661Jy sigma=0.000670 ! Fit after self-cal, rms=0.098825Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=7.665 mas, bpa=5.462 degrees ! Estimated noise=1026.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.12204e-05 Jy ! Component: 100 - total flux cleaned = -0.000236284 Jy ! Component: 150 - total flux cleaned = -0.000365666 Jy ! Component: 200 - total flux cleaned = -0.000479352 Jy ! Total flux subtracted in 200 components = -0.000479352 Jy ! Clean residual min=-0.004397 max=0.004475 Jy/beam ! Clean residual mean=-0.000008 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.122522 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.122522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098727Jy sigma=0.000666 ! Fit after self-cal, rms=0.099010Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099010Jy sigma=0.000665 ! Fit after self-cal, rms=0.104385Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=7.692 mas, bpa=4.751 degrees ! Estimated noise=1002.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122378 Jy ! Component: 100 - total flux cleaned = -2.81712e-05 Jy ! Component: 150 - total flux cleaned = -0.000111961 Jy ! Component: 200 - total flux cleaned = -0.000185842 Jy ! Total flux subtracted in 200 components = -0.000185842 Jy ! Clean residual min=-0.003161 max=0.003270 Jy/beam ! Clean residual mean=-0.000002 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.122336 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.122336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104342Jy sigma=0.000660 ! Fit after self-cal, rms=0.104619Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (40, 112.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222026 Jy ! Component: 100 - total flux cleaned = 0.00264337 Jy ! Component: 150 - total flux cleaned = 0.00280339 Jy ! Component: 200 - total flux cleaned = 0.00289665 Jy ! Total flux subtracted in 200 components = 0.00289665 Jy ! Clean residual min=-0.002910 max=0.003238 Jy/beam ! Clean residual mean=-0.000002 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.125233 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.125233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104506Jy sigma=0.000659 ! Fit after self-cal, rms=0.104469Jy sigma=0.000659 ! Inverting map ! Added new window around map position (-91, 95.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239713 Jy ! Component: 100 - total flux cleaned = 0.00269585 Jy ! Component: 150 - total flux cleaned = 0.00285139 Jy ! Component: 200 - total flux cleaned = 0.00289502 Jy ! Total flux subtracted in 200 components = 0.00289502 Jy ! Clean residual min=-0.002678 max=0.002691 Jy/beam ! Clean residual mean=-0.000001 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.128128 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.128128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104373Jy sigma=0.000659 ! Fit after self-cal, rms=0.104347Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104347Jy sigma=0.000658 ! Fit after self-cal, rms=0.104933Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=7.669 mas, bpa=4.731 degrees ! Estimated noise=998.302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775351 Jy ! Component: 100 - total flux cleaned = 0.000628452 Jy ! Component: 150 - total flux cleaned = 0.000584546 Jy ! Component: 200 - total flux cleaned = 0.000583521 Jy ! Total flux subtracted in 200 components = 0.000583521 Jy ! Clean residual min=-0.002714 max=0.002614 Jy/beam ! Clean residual mean=-0.000002 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.128712 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 114 components and 0.128712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104884Jy sigma=0.000658 ! Fit after self-cal, rms=0.104898Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.66485e-05 Jy ! Component: 100 - total flux cleaned = -4.95236e-06 Jy ! Component: 150 - total flux cleaned = -8.00498e-05 Jy ! Component: 200 - total flux cleaned = -0.000185368 Jy ! Total flux subtracted in 200 components = -0.000185368 Jy ! Clean residual min=-0.002653 max=0.002584 Jy/beam ! Clean residual mean=-0.000002 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.128526 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 0.128526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104864Jy sigma=0.000658 ! Fit after self-cal, rms=0.104855Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104855Jy sigma=0.000658 ! Fit after self-cal, rms=0.104854Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.741 mas, bmaj=15.39 mas, bpa=5.606 degrees ! Estimated noise=1238.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000595827 Jy ! Component: 100 - total flux cleaned = -0.000633085 Jy ! Component: 150 - total flux cleaned = -0.000635453 Jy ! Component: 200 - total flux cleaned = -0.000636003 Jy ! Total flux subtracted in 200 components = -0.000636003 Jy ! Clean residual min=-0.002531 max=0.002694 Jy/beam ! Clean residual mean=-0.000004 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.12789 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 134 components and 0.12789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104837Jy sigma=0.000658 ! Fit after self-cal, rms=0.104859Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017296 Jy ! Component: 100 - total flux cleaned = -0.000223668 Jy ! Component: 150 - total flux cleaned = -0.000246756 Jy ! Component: 200 - total flux cleaned = -0.000268165 Jy ! Total flux subtracted in 200 components = -0.000268165 Jy ! Clean residual min=-0.002437 max=0.002649 Jy/beam ! Clean residual mean=-0.000004 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.127622 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 140 components and 0.127622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104851Jy sigma=0.000658 ! Fit after self-cal, rms=0.104857Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=7.662 mas, bpa=4.797 degrees ! Estimated noise=996.856 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 7.662 at 4.797 degrees (North through East) ! Clean map min=-0.0028855 max=0.071396 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=6.172 mas, bpa=-0.9421 degrees ! Estimated noise=1570.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545752 Jy ! Component: 100 - total flux cleaned = 0.0812489 Jy ! Component: 150 - total flux cleaned = 0.0971729 Jy ! Component: 200 - total flux cleaned = 0.10697 Jy ! Total flux subtracted in 200 components = 0.10697 Jy ! Clean residual min=-0.005197 max=0.006029 Jy/beam ! Clean residual mean=0.000008 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.10697 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.10697 Jy ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=7.662 mas, bpa=4.797 degrees ! Estimated noise=996.856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00818383 Jy ! Component: 100 - total flux cleaned = 0.0130782 Jy ! Component: 150 - total flux cleaned = 0.016272 Jy ! Component: 200 - total flux cleaned = 0.0176589 Jy ! Total flux subtracted in 200 components = 0.0176589 Jy ! Clean residual min=-0.003477 max=0.002787 Jy/beam ! Clean residual mean=0.000001 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.124629 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 55 components and 0.124629 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.741 mas, bmaj=15.39 mas, bpa=5.606 degrees ! Estimated noise=1238.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253593 Jy ! Component: 100 - total flux cleaned = 0.00260166 Jy ! Component: 150 - total flux cleaned = 0.00272635 Jy ! Component: 200 - total flux cleaned = 0.00272685 Jy ! Total flux subtracted in 200 components = 0.00272685 Jy ! Clean residual min=-0.002601 max=0.003021 Jy/beam ! Clean residual mean=-0.000003 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.127356 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.23641e-05 Jy ! Component: 100 - total flux cleaned = 5.5079e-05 Jy ! Component: 150 - total flux cleaned = 9.81182e-05 Jy ! Component: 200 - total flux cleaned = 5.86511e-05 Jy ! Total flux subtracted in 200 components = 5.86511e-05 Jy ! Clean residual min=-0.002416 max=0.002908 Jy/beam ! Clean residual mean=-0.000003 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.127414 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 92 components and 0.127414 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=7.662 mas, bpa=4.797 degrees ! Estimated noise=996.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508993 Jy ! Component: 100 - total flux cleaned = -0.000814885 Jy ! Component: 150 - total flux cleaned = -0.00104129 Jy ! Component: 200 - total flux cleaned = -0.00124935 Jy ! Total flux subtracted in 200 components = -0.00124935 Jy ! Clean residual min=-0.002918 max=0.002725 Jy/beam ! Clean residual mean=-0.000003 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.126165 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.126165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104902Jy sigma=0.000658 ! Fit after self-cal, rms=0.104899Jy sigma=0.000658 wmodel J1529-1904_S_2017_06_15_pus_map.mod ! Writing 109 model components to file: J1529-1904_S_2017_06_15_pus_map.mod wobs J1529-1904_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1529-1904_S_2017_06_15_pus_uvs.fits wwins J1529-1904_S_2017_06_15_pus_map.win ! wwins: Wrote 5 windows to J1529-1904_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000565961 Jy ! Component: 100 - total flux cleaned = -0.000866836 Jy ! Component: 150 - total flux cleaned = -0.00106339 Jy ! Component: 200 - total flux cleaned = -0.00135965 Jy ! Component: 250 - total flux cleaned = -0.00160782 Jy ! Component: 300 - total flux cleaned = -0.00194713 Jy ! Component: 350 - total flux cleaned = -0.00233729 Jy ! Component: 400 - total flux cleaned = -0.00280873 Jy ! Component: 450 - total flux cleaned = -0.00317368 Jy ! Component: 500 - total flux cleaned = -0.00355727 Jy ! Component: 550 - total flux cleaned = -0.00393129 Jy ! Component: 600 - total flux cleaned = -0.00432349 Jy ! Component: 650 - total flux cleaned = -0.00473301 Jy ! Component: 700 - total flux cleaned = -0.00507996 Jy ! Component: 750 - total flux cleaned = -0.0053412 Jy ! Component: 800 - total flux cleaned = -0.00557151 Jy ! Component: 850 - total flux cleaned = -0.0058472 Jy ! Component: 900 - total flux cleaned = -0.00601883 Jy ! Component: 950 - total flux cleaned = -0.00606706 Jy ! Component: 1000 - total flux cleaned = -0.006115 Jy ! Component: 1050 - total flux cleaned = -0.0061849 Jy ! Component: 1100 - total flux cleaned = -0.00623121 Jy ! Component: 1150 - total flux cleaned = -0.00634415 Jy ! Component: 1200 - total flux cleaned = -0.00645521 Jy ! Component: 1250 - total flux cleaned = -0.00645479 Jy ! Component: 1300 - total flux cleaned = -0.00647631 Jy ! Component: 1350 - total flux cleaned = -0.00651849 Jy ! Component: 1400 - total flux cleaned = -0.00651805 Jy ! Component: 1450 - total flux cleaned = -0.0065596 Jy ! Component: 1500 - total flux cleaned = -0.00660042 Jy ! Component: 1550 - total flux cleaned = -0.00664063 Jy ! Component: 1600 - total flux cleaned = -0.0065614 Jy ! Component: 1650 - total flux cleaned = -0.0065813 Jy ! Component: 1700 - total flux cleaned = -0.00662009 Jy ! Component: 1750 - total flux cleaned = -0.00663896 Jy ! Component: 1800 - total flux cleaned = -0.00658201 Jy ! Component: 1850 - total flux cleaned = -0.00646989 Jy ! Component: 1900 - total flux cleaned = -0.00648842 Jy ! Component: 1950 - total flux cleaned = -0.00643352 Jy ! Component: 2000 - total flux cleaned = -0.0063796 Jy ! Component: 2050 - total flux cleaned = -0.00636161 Jy ! Component: 2100 - total flux cleaned = -0.00634372 Jy ! Component: 2150 - total flux cleaned = -0.00634351 Jy ! Component: 2200 - total flux cleaned = -0.00630868 Jy ! Component: 2250 - total flux cleaned = -0.00627444 Jy ! Component: 2300 - total flux cleaned = -0.0062744 Jy ! Component: 2350 - total flux cleaned = -0.00620736 Jy ! Component: 2400 - total flux cleaned = -0.00625721 Jy ! Component: 2450 - total flux cleaned = -0.0062405 Jy ! Component: 2500 - total flux cleaned = -0.00617515 Jy ! Component: 2550 - total flux cleaned = -0.00619139 Jy ! Component: 2600 - total flux cleaned = -0.00620722 Jy ! Component: 2650 - total flux cleaned = -0.00614352 Jy ! Component: 2700 - total flux cleaned = -0.00612788 Jy ! Component: 2750 - total flux cleaned = -0.0061123 Jy ! Component: 2800 - total flux cleaned = -0.00608132 Jy ! Component: 2850 - total flux cleaned = -0.00611238 Jy ! Component: 2900 - total flux cleaned = -0.00609709 Jy ! Component: 2950 - total flux cleaned = -0.00612751 Jy ! Component: 3000 - total flux cleaned = -0.00614258 Jy ! Component: 3050 - total flux cleaned = -0.00609764 Jy ! Component: 3100 - total flux cleaned = -0.00611231 Jy ! Component: 3150 - total flux cleaned = -0.0060681 Jy ! Component: 3200 - total flux cleaned = -0.00603875 Jy ! Component: 3250 - total flux cleaned = -0.00600952 Jy ! Component: 3300 - total flux cleaned = -0.00595174 Jy ! Component: 3350 - total flux cleaned = -0.005923 Jy ! Component: 3400 - total flux cleaned = -0.00588015 Jy ! Component: 3450 - total flux cleaned = -0.00586611 Jy ! Component: 3500 - total flux cleaned = -0.0058661 Jy ! Component: 3550 - total flux cleaned = -0.00585209 Jy ! Component: 3600 - total flux cleaned = -0.00582411 Jy ! Component: 3650 - total flux cleaned = -0.00579632 Jy ! Component: 3700 - total flux cleaned = -0.00574131 Jy ! Component: 3750 - total flux cleaned = -0.00574121 Jy ! Component: 3800 - total flux cleaned = -0.00572761 Jy ! Component: 3850 - total flux cleaned = -0.00564663 Jy ! Component: 3900 - total flux cleaned = -0.00564662 Jy ! Component: 3950 - total flux cleaned = -0.00560656 Jy ! Component: 4000 - total flux cleaned = -0.00557992 Jy ! Component: 4050 - total flux cleaned = -0.00554026 Jy ! Total flux subtracted in 4096 components = -0.00550088 Jy ! Clean residual min=-0.000774 max=0.000843 Jy/beam ! Clean residual mean=-0.000003 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.120664 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 383 components and 0.120664 Jy ![Exited script file: muppet] wmap "J1529-1904_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 7.662 at 4.797 degrees (North through East) ! Clean map min=-0.0019944 max=0.070369 Jy/beam ! Writing clean map to FITS file: J1529-1904_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0703686 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228393 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.9737 0.9737 1.9474 3.8948 7.7896 15.5792 31.1584 62.3168 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 7.662 at 4.797 degrees (North through East) ! Clean map min=-0.0019944 max=0.070369 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1529-1904_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:23:04 2019