! Started logfile: J1526-1725_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:05 2019 obs J1526-1725_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1526-1725_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.944253 visibilities/baseline/integration-bin. ! Found source: J1526-1725 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 19716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1526-1725_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 693 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936333Jy sigma=0.007649 ! Fit after self-cal, rms=0.909397Jy sigma=0.007439 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=11.63 mas, bpa=-18.75 degrees ! Estimated noise=1223.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676879 Jy ! Component: 100 - total flux cleaned = 0.0874121 Jy ! Total flux subtracted in 100 components = 0.0874121 Jy ! Clean residual min=-0.007510 max=0.010308 Jy/beam ! Clean residual mean=0.000015 rms=0.002256 Jy/beam ! Combined flux in latest and established models = 0.0874121 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0874121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099907Jy sigma=0.000756 ! Fit after self-cal, rms=0.099889Jy sigma=0.000755 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=14.26 mas, bpa=-16.56 degrees ! Estimated noise=731.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151876 Jy ! Component: 100 - total flux cleaned = 0.0229488 Jy ! Component: 150 - total flux cleaned = 0.0275861 Jy ! Component: 200 - total flux cleaned = 0.0305653 Jy ! Total flux subtracted in 200 components = 0.0305653 Jy ! Clean residual min=-0.004961 max=0.006620 Jy/beam ! Clean residual mean=0.000005 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.117977 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 58 components and 0.117977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097575Jy sigma=0.000736 ! Fit after self-cal, rms=0.097555Jy sigma=0.000736 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.47 FD 0.93 HN 1.26 KP 1.07 ! LA 0.97 MK 1.08 NL 0.95 OV 0.91 ! PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.27 KP 1.07 ! LA 0.94 MK 1.05 NL 1.01 OV 0.92 ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.97 HN 1.30 KP 1.02 ! LA 0.77 MK 1.08 NL 1.13 OV 0.85 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.04 KP 1.00* ! LA 0.93 MK 1.10 NL 1.00* OV 1.00* ! PT 0.86 ! ! ! Fit before self-cal, rms=0.097555Jy sigma=0.000736 ! Fit after self-cal, rms=0.104539Jy sigma=0.000724 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=15.11 mas, bpa=-16.67 degrees ! Estimated noise=752.269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00316216 Jy ! Component: 100 - total flux cleaned = -0.00368362 Jy ! Component: 150 - total flux cleaned = -0.00408646 Jy ! Component: 200 - total flux cleaned = -0.00442427 Jy ! Total flux subtracted in 200 components = -0.00442427 Jy ! Clean residual min=-0.003814 max=0.004863 Jy/beam ! Clean residual mean=-0.000011 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.113553 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.113553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104347Jy sigma=0.000723 ! Fit after self-cal, rms=0.104613Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104613Jy sigma=0.000723 ! Fit after self-cal, rms=0.114989Jy sigma=0.000716 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=15.14 mas, bpa=-17.31 degrees ! Estimated noise=753.247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150266 Jy ! Component: 100 - total flux cleaned = -0.00171925 Jy ! Component: 150 - total flux cleaned = -0.00180537 Jy ! Component: 200 - total flux cleaned = -0.00191353 Jy ! Total flux subtracted in 200 components = -0.00191353 Jy ! Clean residual min=-0.002819 max=0.003609 Jy/beam ! Clean residual mean=0.000000 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.11164 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.11164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114937Jy sigma=0.000716 ! Fit after self-cal, rms=0.115160Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-37, -17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246702 Jy ! Component: 100 - total flux cleaned = 0.00268506 Jy ! Component: 150 - total flux cleaned = 0.00289783 Jy ! Component: 200 - total flux cleaned = 0.00303059 Jy ! Total flux subtracted in 200 components = 0.00303059 Jy ! Clean residual min=-0.002562 max=0.002320 Jy/beam ! Clean residual mean=-0.000000 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.11467 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.11467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115045Jy sigma=0.000714 ! Fit after self-cal, rms=0.115055Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115055Jy sigma=0.000714 ! Fit after self-cal, rms=0.117328Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.848 mas, bmaj=15.2 mas, bpa=-17.46 degrees ! Estimated noise=751.421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614201 Jy ! Component: 100 - total flux cleaned = 0.000613248 Jy ! Component: 150 - total flux cleaned = 0.000574995 Jy ! Component: 200 - total flux cleaned = 0.000574826 Jy ! Total flux subtracted in 200 components = 0.000574826 Jy ! Clean residual min=-0.002410 max=0.002250 Jy/beam ! Clean residual mean=0.000000 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.115245 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 114 components and 0.115245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117283Jy sigma=0.000714 ! Fit after self-cal, rms=0.117351Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348191 Jy ! Component: 100 - total flux cleaned = 0.000279927 Jy ! Component: 150 - total flux cleaned = 0.000280167 Jy ! Component: 200 - total flux cleaned = 0.000251626 Jy ! Total flux subtracted in 200 components = 0.000251626 Jy ! Clean residual min=-0.002344 max=0.002192 Jy/beam ! Clean residual mean=0.000000 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.115497 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 122 components and 0.115497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117325Jy sigma=0.000714 ! Fit after self-cal, rms=0.117326Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117326Jy sigma=0.000713 ! Fit after self-cal, rms=0.117702Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.746 mas, bmaj=20.45 mas, bpa=-7.69 degrees ! Estimated noise=851.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185781 Jy ! Component: 100 - total flux cleaned = 0.000132257 Jy ! Component: 150 - total flux cleaned = 5.81623e-06 Jy ! Component: 200 - total flux cleaned = -0.000108109 Jy ! Total flux subtracted in 200 components = -0.000108109 Jy ! Clean residual min=-0.002138 max=0.002163 Jy/beam ! Clean residual mean=-0.000000 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.115389 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 151 components and 0.115389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117689Jy sigma=0.000713 ! Fit after self-cal, rms=0.117726Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257903 Jy ! Component: 100 - total flux cleaned = 0.000171061 Jy ! Component: 150 - total flux cleaned = 0.000110685 Jy ! Component: 200 - total flux cleaned = 7.31205e-05 Jy ! Total flux subtracted in 200 components = 7.31205e-05 Jy ! Clean residual min=-0.002185 max=0.002154 Jy/beam ! Clean residual mean=0.000000 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.115462 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 170 components and 0.115462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117719Jy sigma=0.000713 ! Fit after self-cal, rms=0.117725Jy sigma=0.000713 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=15.23 mas, bpa=-17.53 degrees ! Estimated noise=750.133 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 15.23 at -17.53 degrees (North through East) ! Clean map min=-0.0023538 max=0.09602 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=12.53 mas, bpa=-20 degrees ! Estimated noise=1352.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0736111 Jy ! Component: 100 - total flux cleaned = 0.0928362 Jy ! Component: 150 - total flux cleaned = 0.101062 Jy ! Component: 200 - total flux cleaned = 0.106405 Jy ! Total flux subtracted in 200 components = 0.106405 Jy ! Clean residual min=-0.004543 max=0.003875 Jy/beam ! Clean residual mean=0.000012 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.106405 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.106405 Jy ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=15.23 mas, bpa=-17.53 degrees ! Estimated noise=750.133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036656 Jy ! Component: 100 - total flux cleaned = 0.00613043 Jy ! Component: 150 - total flux cleaned = 0.00732881 Jy ! Component: 200 - total flux cleaned = 0.00776618 Jy ! Total flux subtracted in 200 components = 0.00776618 Jy ! Clean residual min=-0.002346 max=0.002456 Jy/beam ! Clean residual mean=0.000000 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.114171 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 67 components and 0.114171 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.746 mas, bmaj=20.45 mas, bpa=-7.69 degrees ! Estimated noise=851.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888095 Jy ! Component: 100 - total flux cleaned = 0.000890309 Jy ! Component: 150 - total flux cleaned = 0.000888243 Jy ! Component: 200 - total flux cleaned = 0.00085304 Jy ! Total flux subtracted in 200 components = 0.00085304 Jy ! Clean residual min=-0.002364 max=0.002257 Jy/beam ! Clean residual mean=0.000000 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.115024 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.39406e-06 Jy ! Component: 100 - total flux cleaned = -1.09257e-06 Jy ! Component: 150 - total flux cleaned = -2.56264e-05 Jy ! Component: 200 - total flux cleaned = -2.18939e-06 Jy ! Total flux subtracted in 200 components = -2.18939e-06 Jy ! Clean residual min=-0.002397 max=0.002179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.115022 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 112 components and 0.115022 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=15.23 mas, bpa=-17.53 degrees ! Estimated noise=750.133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351987 Jy ! Component: 100 - total flux cleaned = -0.000515989 Jy ! Component: 150 - total flux cleaned = -0.000441858 Jy ! Component: 200 - total flux cleaned = -0.000407986 Jy ! Total flux subtracted in 200 components = -0.000407986 Jy ! Clean residual min=-0.002200 max=0.002209 Jy/beam ! Clean residual mean=0.000000 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.114614 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 131 components and 0.114614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117766Jy sigma=0.000714 ! Fit after self-cal, rms=0.117674Jy sigma=0.000713 wmodel J1526-1725_S_2017_10_21_pus_map.mod ! Writing 131 model components to file: J1526-1725_S_2017_10_21_pus_map.mod wobs J1526-1725_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1526-1725_S_2017_10_21_pus_uvs.fits wwins J1526-1725_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1526-1725_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000399989 Jy ! Component: 100 - total flux cleaned = -0.000472949 Jy ! Component: 150 - total flux cleaned = -0.000472966 Jy ! Component: 200 - total flux cleaned = -0.000472753 Jy ! Component: 250 - total flux cleaned = -0.000504492 Jy ! Component: 300 - total flux cleaned = -0.000684 Jy ! Component: 350 - total flux cleaned = -0.000886374 Jy ! Component: 400 - total flux cleaned = -0.00111045 Jy ! Component: 450 - total flux cleaned = -0.00132841 Jy ! Component: 500 - total flux cleaned = -0.00146166 Jy ! Component: 550 - total flux cleaned = -0.0015914 Jy ! Component: 600 - total flux cleaned = -0.00169316 Jy ! Component: 650 - total flux cleaned = -0.0019163 Jy ! Component: 700 - total flux cleaned = -0.00206168 Jy ! Component: 750 - total flux cleaned = -0.00218045 Jy ! Component: 800 - total flux cleaned = -0.00239112 Jy ! Component: 850 - total flux cleaned = -0.0025516 Jy ! Component: 900 - total flux cleaned = -0.00273131 Jy ! Component: 950 - total flux cleaned = -0.00288623 Jy ! Component: 1000 - total flux cleaned = -0.00301738 Jy ! Component: 1050 - total flux cleaned = -0.00323174 Jy ! Component: 1100 - total flux cleaned = -0.0034214 Jy ! Component: 1150 - total flux cleaned = -0.00366961 Jy ! Component: 1200 - total flux cleaned = -0.00387315 Jy ! Component: 1250 - total flux cleaned = -0.00409343 Jy ! Component: 1300 - total flux cleaned = -0.00425172 Jy ! Component: 1350 - total flux cleaned = -0.00440772 Jy ! Component: 1400 - total flux cleaned = -0.00461933 Jy ! Component: 1450 - total flux cleaned = -0.00473291 Jy ! Component: 1500 - total flux cleaned = -0.0049579 Jy ! Component: 1550 - total flux cleaned = -0.00508709 Jy ! Component: 1600 - total flux cleaned = -0.00523342 Jy ! Component: 1650 - total flux cleaned = -0.00535977 Jy ! Component: 1700 - total flux cleaned = -0.00543122 Jy ! Component: 1750 - total flux cleaned = -0.00559018 Jy ! Component: 1800 - total flux cleaned = -0.00572976 Jy ! Component: 1850 - total flux cleaned = -0.00583336 Jy ! Component: 1900 - total flux cleaned = -0.00591892 Jy ! Component: 1950 - total flux cleaned = -0.00602069 Jy ! Component: 2000 - total flux cleaned = -0.00610472 Jy ! Component: 2050 - total flux cleaned = -0.00622103 Jy ! Component: 2100 - total flux cleaned = -0.00628685 Jy ! Component: 2150 - total flux cleaned = -0.00635223 Jy ! Component: 2200 - total flux cleaned = -0.00644915 Jy ! Component: 2250 - total flux cleaned = -0.00659328 Jy ! Component: 2300 - total flux cleaned = -0.00659333 Jy ! Component: 2350 - total flux cleaned = -0.00665636 Jy ! Component: 2400 - total flux cleaned = -0.00671888 Jy ! Component: 2450 - total flux cleaned = -0.00678071 Jy ! Component: 2500 - total flux cleaned = -0.00681139 Jy ! Component: 2550 - total flux cleaned = -0.00682657 Jy ! Component: 2600 - total flux cleaned = -0.00687192 Jy ! Component: 2650 - total flux cleaned = -0.00688695 Jy ! Component: 2700 - total flux cleaned = -0.00688698 Jy ! Component: 2750 - total flux cleaned = -0.00694621 Jy ! Component: 2800 - total flux cleaned = -0.00696091 Jy ! Component: 2850 - total flux cleaned = -0.00697552 Jy ! Component: 2900 - total flux cleaned = -0.0070187 Jy ! Component: 2950 - total flux cleaned = -0.00703301 Jy ! Component: 3000 - total flux cleaned = -0.00701879 Jy ! Component: 3050 - total flux cleaned = -0.00708971 Jy ! Component: 3100 - total flux cleaned = -0.00713181 Jy ! Component: 3150 - total flux cleaned = -0.00718787 Jy ! Component: 3200 - total flux cleaned = -0.0072294 Jy ! Component: 3250 - total flux cleaned = -0.00724316 Jy ! Component: 3300 - total flux cleaned = -0.00722941 Jy ! Component: 3350 - total flux cleaned = -0.00727039 Jy ! Component: 3400 - total flux cleaned = -0.00731111 Jy ! Component: 3450 - total flux cleaned = -0.00731106 Jy ! Component: 3500 - total flux cleaned = -0.00739143 Jy ! Component: 3550 - total flux cleaned = -0.00739137 Jy ! Component: 3600 - total flux cleaned = -0.00744421 Jy ! Component: 3650 - total flux cleaned = -0.00745735 Jy ! Component: 3700 - total flux cleaned = -0.00750966 Jy ! Component: 3750 - total flux cleaned = -0.00749656 Jy ! Component: 3800 - total flux cleaned = -0.00754843 Jy ! Component: 3850 - total flux cleaned = -0.00758686 Jy ! Component: 3900 - total flux cleaned = -0.00758682 Jy ! Component: 3950 - total flux cleaned = -0.00761217 Jy ! Component: 4000 - total flux cleaned = -0.00754875 Jy ! Component: 4050 - total flux cleaned = -0.00761185 Jy ! Total flux subtracted in 4096 components = -0.00767451 Jy ! Clean residual min=-0.000717 max=0.000745 Jy/beam ! Clean residual mean=0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.10694 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 404 components and 0.106939 Jy ![Exited script file: muppet] wmap "J1526-1725_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 15.23 at -17.53 degrees (North through East) ! Clean map min=-0.0019847 max=0.096342 Jy/beam ! Writing clean map to FITS file: J1526-1725_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0963424 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000239749 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.746553 0.746553 1.49311 2.98621 5.97243 11.9449 23.8897 47.7794 95.5588 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 15.23 at -17.53 degrees (North through East) ! Clean map min=-0.0019847 max=0.096342 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1526-1725_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:10 2019