! Started logfile: J1526-1725_S_2017_06_15_pus_uvs.log on Tue May 7 15:22:54 2019 obs J1526-1725_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1526-1725_S_2017_06_15_pus_uva.fits ! AN table 1: 216 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.54321 visibilities/baseline/integration-bin. ! Found source: J1526-1725 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 21120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1526-1725_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 800 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1006 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 932 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1907 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937465Jy sigma=0.007107 ! Fit after self-cal, rms=0.901630Jy sigma=0.006847 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=6.493 mas, bpa=1.584 degrees ! Estimated noise=1222.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0761122 Jy ! Component: 100 - total flux cleaned = 0.0961409 Jy ! Total flux subtracted in 100 components = 0.0961409 Jy ! Clean residual min=-0.005101 max=0.008051 Jy/beam ! Clean residual mean=0.000003 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.0961409 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0961409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095326Jy sigma=0.000690 ! Fit after self-cal, rms=0.095255Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=8.167 mas, bpa=5.634 degrees ! Estimated noise=825.846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115164 Jy ! Component: 100 - total flux cleaned = 0.0167463 Jy ! Component: 150 - total flux cleaned = 0.0193711 Jy ! Component: 200 - total flux cleaned = 0.0204299 Jy ! Total flux subtracted in 200 components = 0.0204299 Jy ! Clean residual min=-0.004681 max=0.005519 Jy/beam ! Clean residual mean=-0.000005 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.116571 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 0.116571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094181Jy sigma=0.000678 ! Fit after self-cal, rms=0.094208Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.90 HN 1.15 KP 1.02 ! LA 0.98 MK 1.00* NL 0.92 OV 0.98 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.16 KP 0.97 ! LA 0.95 MK 1.45 NL 1.08 OV 1.03 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.12 KP 0.98 ! LA 0.99 MK 1.14 NL 1.05 OV 0.93 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.90 KP 1.00* ! LA 1.00* MK 0.86 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.094208Jy sigma=0.000678 ! Fit after self-cal, rms=0.097570Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=8.488 mas, bpa=7.424 degrees ! Estimated noise=835.316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00311193 Jy ! Component: 100 - total flux cleaned = -0.00325935 Jy ! Component: 150 - total flux cleaned = -0.00337708 Jy ! Component: 200 - total flux cleaned = -0.00347469 Jy ! Total flux subtracted in 200 components = -0.00347469 Jy ! Clean residual min=-0.004418 max=0.004349 Jy/beam ! Clean residual mean=-0.000006 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.113096 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.113096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097423Jy sigma=0.000675 ! Fit after self-cal, rms=0.097550Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097550Jy sigma=0.000675 ! Fit after self-cal, rms=0.105308Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=8.503 mas, bpa=7.075 degrees ! Estimated noise=829.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808023 Jy ! Component: 100 - total flux cleaned = 0.000884586 Jy ! Component: 150 - total flux cleaned = 0.000950139 Jy ! Component: 200 - total flux cleaned = 0.000978368 Jy ! Total flux subtracted in 200 components = 0.000978368 Jy ! Clean residual min=-0.002242 max=0.002488 Jy/beam ! Clean residual mean=0.000002 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.114074 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.114074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105273Jy sigma=0.000670 ! Fit after self-cal, rms=0.105526Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.5546e-05 Jy ! Component: 100 - total flux cleaned = -9.98344e-05 Jy ! Component: 150 - total flux cleaned = -9.80507e-05 Jy ! Component: 200 - total flux cleaned = -9.82464e-05 Jy ! Total flux subtracted in 200 components = -9.82464e-05 Jy ! Clean residual min=-0.002240 max=0.002395 Jy/beam ! Clean residual mean=0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.113976 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.113976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105513Jy sigma=0.000670 ! Fit after self-cal, rms=0.105510Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105510Jy sigma=0.000669 ! Fit after self-cal, rms=0.107338Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=8.496 mas, bpa=6.869 degrees ! Estimated noise=831.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532069 Jy ! Component: 100 - total flux cleaned = 0.000577594 Jy ! Component: 150 - total flux cleaned = 0.000616998 Jy ! Component: 200 - total flux cleaned = 0.000651298 Jy ! Total flux subtracted in 200 components = 0.000651298 Jy ! Clean residual min=-0.002121 max=0.002384 Jy/beam ! Clean residual mean=0.000002 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.114628 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.114628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107324Jy sigma=0.000669 ! Fit after self-cal, rms=0.107348Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4868e-05 Jy ! Component: 100 - total flux cleaned = 5.13338e-06 Jy ! Component: 150 - total flux cleaned = 6.18393e-06 Jy ! Component: 200 - total flux cleaned = 6.40424e-06 Jy ! Total flux subtracted in 200 components = 6.40424e-06 Jy ! Clean residual min=-0.002118 max=0.002354 Jy/beam ! Clean residual mean=0.000002 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.114634 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.114634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107342Jy sigma=0.000669 ! Fit after self-cal, rms=0.107338Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107338Jy sigma=0.000669 ! Fit after self-cal, rms=0.107637Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.88 mas, bmaj=15.98 mas, bpa=3.687 degrees ! Estimated noise=982.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510211 Jy ! Component: 100 - total flux cleaned = 0.000521369 Jy ! Component: 150 - total flux cleaned = 0.000552423 Jy ! Component: 200 - total flux cleaned = 0.000575859 Jy ! Total flux subtracted in 200 components = 0.000575859 Jy ! Clean residual min=-0.002552 max=0.002952 Jy/beam ! Clean residual mean=0.000003 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.11521 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 62 components and 0.11521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107634Jy sigma=0.000669 ! Fit after self-cal, rms=0.107631Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.05997e-05 Jy ! Component: 100 - total flux cleaned = -2.04285e-05 Jy ! Component: 150 - total flux cleaned = -1.34632e-05 Jy ! Component: 200 - total flux cleaned = -7.69471e-06 Jy ! Total flux subtracted in 200 components = -7.69471e-06 Jy ! Clean residual min=-0.002555 max=0.002933 Jy/beam ! Clean residual mean=0.000003 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.115202 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 65 components and 0.115202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107630Jy sigma=0.000669 ! Fit after self-cal, rms=0.107627Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.486 mas, bpa=6.715 degrees ! Estimated noise=833.548 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 8.486 at 6.715 degrees (North through East) ! Clean map min=-0.0020556 max=0.10381 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=6.668 mas, bpa=3.692 degrees ! Estimated noise=1288.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0773873 Jy ! Component: 100 - total flux cleaned = 0.0975128 Jy ! Component: 150 - total flux cleaned = 0.106905 Jy ! Component: 200 - total flux cleaned = 0.111975 Jy ! Total flux subtracted in 200 components = 0.111975 Jy ! Clean residual min=-0.002906 max=0.003752 Jy/beam ! Clean residual mean=0.000001 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.111976 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.111976 Jy ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.486 mas, bpa=6.715 degrees ! Estimated noise=833.548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286011 Jy ! Component: 100 - total flux cleaned = 0.00334039 Jy ! Component: 150 - total flux cleaned = 0.00363867 Jy ! Component: 200 - total flux cleaned = 0.00380922 Jy ! Total flux subtracted in 200 components = 0.00380922 Jy ! Clean residual min=-0.002340 max=0.002210 Jy/beam ! Clean residual mean=0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.115785 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.115785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.88 mas, bmaj=15.98 mas, bpa=3.687 degrees ! Estimated noise=982.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214821 Jy ! Component: 100 - total flux cleaned = 0.000195169 Jy ! Component: 150 - total flux cleaned = 0.000176645 Jy ! Component: 200 - total flux cleaned = 0.000158893 Jy ! Total flux subtracted in 200 components = 0.000158893 Jy ! Clean residual min=-0.002596 max=0.002691 Jy/beam ! Clean residual mean=0.000003 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.115944 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.63914e-05 Jy ! Component: 100 - total flux cleaned = -3.14148e-05 Jy ! Component: 150 - total flux cleaned = -4.52774e-05 Jy ! Component: 200 - total flux cleaned = -4.50158e-05 Jy ! Total flux subtracted in 200 components = -4.50158e-05 Jy ! Clean residual min=-0.002579 max=0.002645 Jy/beam ! Clean residual mean=0.000003 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.115899 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.115899 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.486 mas, bpa=6.715 degrees ! Estimated noise=833.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000349325 Jy ! Component: 100 - total flux cleaned = -0.000350119 Jy ! Component: 150 - total flux cleaned = -0.000319787 Jy ! Component: 200 - total flux cleaned = -0.000293322 Jy ! Total flux subtracted in 200 components = -0.000293322 Jy ! Clean residual min=-0.002221 max=0.002127 Jy/beam ! Clean residual mean=0.000001 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.115605 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.115605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107607Jy sigma=0.000669 ! Fit after self-cal, rms=0.107601Jy sigma=0.000669 wmodel J1526-1725_S_2017_06_15_pus_map.mod ! Writing 65 model components to file: J1526-1725_S_2017_06_15_pus_map.mod wobs J1526-1725_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1526-1725_S_2017_06_15_pus_uvs.fits wwins J1526-1725_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J1526-1725_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.50369e-05 Jy ! Component: 100 - total flux cleaned = 2.48962e-05 Jy ! Component: 150 - total flux cleaned = 5.93483e-05 Jy ! Component: 200 - total flux cleaned = -6.43847e-05 Jy ! Component: 250 - total flux cleaned = -9.48585e-05 Jy ! Component: 300 - total flux cleaned = -0.000267724 Jy ! Component: 350 - total flux cleaned = -0.00043461 Jy ! Component: 400 - total flux cleaned = -0.000569914 Jy ! Component: 450 - total flux cleaned = -0.000728546 Jy ! Component: 500 - total flux cleaned = -0.00093365 Jy ! Component: 550 - total flux cleaned = -0.000983554 Jy ! Component: 600 - total flux cleaned = -0.00117976 Jy ! Component: 650 - total flux cleaned = -0.00129922 Jy ! Component: 700 - total flux cleaned = -0.00136938 Jy ! Component: 750 - total flux cleaned = -0.00143862 Jy ! Component: 800 - total flux cleaned = -0.0015513 Jy ! Component: 850 - total flux cleaned = -0.0016835 Jy ! Component: 900 - total flux cleaned = -0.00168294 Jy ! Component: 950 - total flux cleaned = -0.00174646 Jy ! Component: 1000 - total flux cleaned = -0.00178805 Jy ! Component: 1050 - total flux cleaned = -0.00184956 Jy ! Component: 1100 - total flux cleaned = -0.00184942 Jy ! Component: 1150 - total flux cleaned = -0.00186957 Jy ! Component: 1200 - total flux cleaned = -0.0019874 Jy ! Component: 1250 - total flux cleaned = -0.00200679 Jy ! Component: 1300 - total flux cleaned = -0.00210172 Jy ! Component: 1350 - total flux cleaned = -0.00213898 Jy ! Component: 1400 - total flux cleaned = -0.00228631 Jy ! Component: 1450 - total flux cleaned = -0.00235895 Jy ! Component: 1500 - total flux cleaned = -0.00250229 Jy ! Component: 1550 - total flux cleaned = -0.00257277 Jy ! Component: 1600 - total flux cleaned = -0.00269481 Jy ! Component: 1650 - total flux cleaned = -0.00272946 Jy ! Component: 1700 - total flux cleaned = -0.00288264 Jy ! Component: 1750 - total flux cleaned = -0.00289944 Jy ! Component: 1800 - total flux cleaned = -0.00303224 Jy ! Component: 1850 - total flux cleaned = -0.00309798 Jy ! Component: 1900 - total flux cleaned = -0.00313055 Jy ! Component: 1950 - total flux cleaned = -0.00316267 Jy ! Component: 2000 - total flux cleaned = -0.00327394 Jy ! Component: 2050 - total flux cleaned = -0.00330527 Jy ! Component: 2100 - total flux cleaned = -0.00336733 Jy ! Component: 2150 - total flux cleaned = -0.00338271 Jy ! Component: 2200 - total flux cleaned = -0.00339789 Jy ! Component: 2250 - total flux cleaned = -0.00344279 Jy ! Component: 2300 - total flux cleaned = -0.0034724 Jy ! Component: 2350 - total flux cleaned = -0.00347236 Jy ! Component: 2400 - total flux cleaned = -0.00347246 Jy ! Component: 2450 - total flux cleaned = -0.00351589 Jy ! Component: 2500 - total flux cleaned = -0.0035731 Jy ! Component: 2550 - total flux cleaned = -0.00361574 Jy ! Component: 2600 - total flux cleaned = -0.00362985 Jy ! Component: 2650 - total flux cleaned = -0.00368549 Jy ! Component: 2700 - total flux cleaned = -0.00371314 Jy ! Component: 2750 - total flux cleaned = -0.00379541 Jy ! Component: 2800 - total flux cleaned = -0.00387691 Jy ! Component: 2850 - total flux cleaned = -0.00394414 Jy ! Component: 2900 - total flux cleaned = -0.00399768 Jy ! Component: 2950 - total flux cleaned = -0.00410399 Jy ! Component: 3000 - total flux cleaned = -0.00413036 Jy ! Component: 3050 - total flux cleaned = -0.00420893 Jy ! Component: 3100 - total flux cleaned = -0.00427391 Jy ! Component: 3150 - total flux cleaned = -0.00437722 Jy ! Component: 3200 - total flux cleaned = -0.00441577 Jy ! Component: 3250 - total flux cleaned = -0.0044669 Jy ! Component: 3300 - total flux cleaned = -0.00455562 Jy ! Component: 3350 - total flux cleaned = -0.00461862 Jy ! Component: 3400 - total flux cleaned = -0.00469356 Jy ! Component: 3450 - total flux cleaned = -0.00471841 Jy ! Component: 3500 - total flux cleaned = -0.00481725 Jy ! Component: 3550 - total flux cleaned = -0.00489087 Jy ! Component: 3600 - total flux cleaned = -0.00492749 Jy ! Component: 3650 - total flux cleaned = -0.0050367 Jy ! Component: 3700 - total flux cleaned = -0.00508493 Jy ! Component: 3750 - total flux cleaned = -0.00507303 Jy ! Component: 3800 - total flux cleaned = -0.0051209 Jy ! Component: 3850 - total flux cleaned = -0.00523973 Jy ! Component: 3900 - total flux cleaned = -0.00527513 Jy ! Component: 3950 - total flux cleaned = -0.00531037 Jy ! Component: 4000 - total flux cleaned = -0.00533373 Jy ! Component: 4050 - total flux cleaned = -0.00538035 Jy ! Total flux subtracted in 4096 components = -0.00543832 Jy ! Clean residual min=-0.000763 max=0.000688 Jy/beam ! Clean residual mean=-0.000001 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.110167 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 329 components and 0.110167 Jy ![Exited script file: muppet] wmap "J1526-1725_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 8.486 at 6.715 degrees (North through East) ! Clean map min=-0.001826 max=0.10308 Jy/beam ! Writing clean map to FITS file: J1526-1725_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103081 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205166 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.597101 0.597101 1.1942 2.3884 4.77681 9.55361 19.1072 38.2145 76.4289 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 8.486 at 6.715 degrees (North through East) ! Clean map min=-0.001826 max=0.10308 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1526-1725_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:22:59 2019