! Started logfile: J1524-3012_S_2017_06_10_pus_uvs.log on Mon May 6 14:57:13 2019 obs J1524-3012_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1524-3012_S_2017_06_10_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.744348 visibilities/baseline/integration-bin. ! Found source: J1524-3012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 15408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1524-3012_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 475 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 446 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 803 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938724Jy sigma=0.006804 ! Fit after self-cal, rms=0.902940Jy sigma=0.006574 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.417 mas, bmaj=7.45 mas, bpa=0.5528 degrees ! Estimated noise=1668.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0779873 Jy ! Component: 100 - total flux cleaned = 0.103161 Jy ! Total flux subtracted in 100 components = 0.103161 Jy ! Clean residual min=-0.007047 max=0.010853 Jy/beam ! Clean residual mean=-0.000052 rms=0.002116 Jy/beam ! Combined flux in latest and established models = 0.103161 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.103161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103366Jy sigma=0.000692 ! Fit after self-cal, rms=0.103092Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=8.36 mas, bpa=-0.1671 degrees ! Estimated noise=1084.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151672 Jy ! Component: 100 - total flux cleaned = 0.0227186 Jy ! Component: 150 - total flux cleaned = 0.026656 Jy ! Component: 200 - total flux cleaned = 0.0286221 Jy ! Total flux subtracted in 200 components = 0.0286221 Jy ! Clean residual min=-0.004572 max=0.007394 Jy/beam ! Clean residual mean=-0.000040 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.131783 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.131783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101471Jy sigma=0.000672 ! Fit after self-cal, rms=0.101479Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 1.01 ! LA 1.04 MK 1.03 NL 1.00 OV 0.98 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.63 KP 0.98 ! LA 0.98 MK 1.05 NL 1.23 OV 1.03 ! PT 0.93 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.59 KP 0.97 ! LA 0.96 MK 1.00 NL 1.12 OV 0.90 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.38 KP 1.00* ! LA 1.00* MK 0.80 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.101479Jy sigma=0.000671 ! Fit after self-cal, rms=0.123083Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=8.267 mas, bpa=0.1653 degrees ! Estimated noise=1107.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354862 Jy ! Component: 100 - total flux cleaned = 0.003695 Jy ! Component: 150 - total flux cleaned = 0.0036375 Jy ! Component: 200 - total flux cleaned = 0.00353428 Jy ! Total flux subtracted in 200 components = 0.00353428 Jy ! Clean residual min=-0.002745 max=0.002644 Jy/beam ! Clean residual mean=-0.000017 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.135317 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 65 components and 0.135317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122930Jy sigma=0.000664 ! Fit after self-cal, rms=0.123392Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123392Jy sigma=0.000663 ! Fit after self-cal, rms=0.123188Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=8.218 mas, bpa=0.1529 degrees ! Estimated noise=1101.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176238 Jy ! Component: 100 - total flux cleaned = 0.00175963 Jy ! Component: 150 - total flux cleaned = 0.00166936 Jy ! Component: 200 - total flux cleaned = 0.0015466 Jy ! Total flux subtracted in 200 components = 0.0015466 Jy ! Clean residual min=-0.002720 max=0.002525 Jy/beam ! Clean residual mean=-0.000011 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.136864 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 79 components and 0.136864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123125Jy sigma=0.000663 ! Fit after self-cal, rms=0.123094Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466292 Jy ! Component: 100 - total flux cleaned = 0.000342257 Jy ! Component: 150 - total flux cleaned = 0.000227968 Jy ! Component: 200 - total flux cleaned = 8.42654e-05 Jy ! Total flux subtracted in 200 components = 8.42654e-05 Jy ! Clean residual min=-0.002806 max=0.002458 Jy/beam ! Clean residual mean=-0.000011 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.136948 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.136948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123055Jy sigma=0.000663 ! Fit after self-cal, rms=0.123033Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123033Jy sigma=0.000663 ! Fit after self-cal, rms=0.123333Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=8.225 mas, bpa=0.03446 degrees ! Estimated noise=1096.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490329 Jy ! Component: 100 - total flux cleaned = 0.000455429 Jy ! Component: 150 - total flux cleaned = 0.000364314 Jy ! Component: 200 - total flux cleaned = 0.000307825 Jy ! Total flux subtracted in 200 components = 0.000307825 Jy ! Clean residual min=-0.002641 max=0.002170 Jy/beam ! Clean residual mean=-0.000010 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.137256 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 0.137256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123308Jy sigma=0.000662 ! Fit after self-cal, rms=0.123302Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.43695e-05 Jy ! Component: 100 - total flux cleaned = 2.54274e-05 Jy ! Component: 150 - total flux cleaned = -5.54464e-05 Jy ! Component: 200 - total flux cleaned = -0.000131939 Jy ! Total flux subtracted in 200 components = -0.000131939 Jy ! Clean residual min=-0.002678 max=0.002166 Jy/beam ! Clean residual mean=-0.000010 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.137124 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.137124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123282Jy sigma=0.000661 ! Fit after self-cal, rms=0.123268Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123268Jy sigma=0.000661 ! Fit after self-cal, rms=0.122080Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.536 mas, bmaj=25.35 mas, bpa=3.66 degrees ! Estimated noise=1404.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412459 Jy ! Component: 100 - total flux cleaned = 0.000440548 Jy ! Component: 150 - total flux cleaned = 0.000428209 Jy ! Component: 200 - total flux cleaned = 0.000405452 Jy ! Total flux subtracted in 200 components = 0.000405452 Jy ! Clean residual min=-0.002840 max=0.002056 Jy/beam ! Clean residual mean=-0.000019 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.137529 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 116 components and 0.137529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122072Jy sigma=0.000661 ! Fit after self-cal, rms=0.122065Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.07422e-05 Jy ! Component: 100 - total flux cleaned = 2.8241e-05 Jy ! Component: 150 - total flux cleaned = 6.63473e-06 Jy ! Component: 200 - total flux cleaned = -1.2689e-05 Jy ! Total flux subtracted in 200 components = -1.2689e-05 Jy ! Clean residual min=-0.002836 max=0.002106 Jy/beam ! Clean residual mean=-0.000019 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.137517 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 120 components and 0.137517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122058Jy sigma=0.000661 ! Fit after self-cal, rms=0.122051Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=8.217 mas, bpa=-0.09073 degrees ! Estimated noise=1093.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.869 x 8.217 at -0.09073 degrees (North through East) ! Clean map min=-0.0028505 max=0.092062 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=7.284 mas, bpa=0.6801 degrees ! Estimated noise=1668.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0774701 Jy ! Component: 100 - total flux cleaned = 0.103204 Jy ! Component: 150 - total flux cleaned = 0.11492 Jy ! Component: 200 - total flux cleaned = 0.121841 Jy ! Total flux subtracted in 200 components = 0.121841 Jy ! Clean residual min=-0.005067 max=0.004229 Jy/beam ! Clean residual mean=-0.000026 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.121841 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.121841 Jy ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=8.217 mas, bpa=-0.09073 degrees ! Estimated noise=1093.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673652 Jy ! Component: 100 - total flux cleaned = 0.0109132 Jy ! Component: 150 - total flux cleaned = 0.0130012 Jy ! Component: 200 - total flux cleaned = 0.0137242 Jy ! Total flux subtracted in 200 components = 0.0137242 Jy ! Clean residual min=-0.002826 max=0.002332 Jy/beam ! Clean residual mean=-0.000018 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.135565 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 94 components and 0.135565 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.536 mas, bmaj=25.35 mas, bpa=3.66 degrees ! Estimated noise=1404.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220306 Jy ! Component: 100 - total flux cleaned = 0.00240706 Jy ! Component: 150 - total flux cleaned = 0.00256704 Jy ! Component: 200 - total flux cleaned = 0.00263466 Jy ! Total flux subtracted in 200 components = 0.00263466 Jy ! Clean residual min=-0.002659 max=0.002129 Jy/beam ! Clean residual mean=-0.000017 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.138199 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29336e-05 Jy ! Component: 100 - total flux cleaned = -0.000148386 Jy ! Component: 150 - total flux cleaned = -0.000236439 Jy ! Component: 200 - total flux cleaned = -0.000318456 Jy ! Total flux subtracted in 200 components = -0.000318456 Jy ! Clean residual min=-0.002632 max=0.002107 Jy/beam ! Clean residual mean=-0.000019 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.137881 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 130 components and 0.137881 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=8.217 mas, bpa=-0.09073 degrees ! Estimated noise=1093.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392181 Jy ! Component: 100 - total flux cleaned = -0.000600692 Jy ! Component: 150 - total flux cleaned = -0.00060084 Jy ! Component: 200 - total flux cleaned = -0.00064128 Jy ! Total flux subtracted in 200 components = -0.00064128 Jy ! Clean residual min=-0.002698 max=0.002295 Jy/beam ! Clean residual mean=-0.000010 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.13724 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 159 components and 0.13724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122041Jy sigma=0.000661 ! Fit after self-cal, rms=0.122000Jy sigma=0.000661 wmodel J1524-3012_S_2017_06_10_pus_map.mod ! Writing 159 model components to file: J1524-3012_S_2017_06_10_pus_map.mod wobs J1524-3012_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1524-3012_S_2017_06_10_pus_uvs.fits wwins J1524-3012_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1524-3012_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000984698 Jy ! Component: 100 - total flux cleaned = -0.00114632 Jy ! Component: 150 - total flux cleaned = -0.00122185 Jy ! Component: 200 - total flux cleaned = -0.00133141 Jy ! Component: 250 - total flux cleaned = -0.0014014 Jy ! Component: 300 - total flux cleaned = -0.00143503 Jy ! Component: 350 - total flux cleaned = -0.00140234 Jy ! Component: 400 - total flux cleaned = -0.00149724 Jy ! Component: 450 - total flux cleaned = -0.00149738 Jy ! Component: 500 - total flux cleaned = -0.00167671 Jy ! Component: 550 - total flux cleaned = -0.0017921 Jy ! Component: 600 - total flux cleaned = -0.00187637 Jy ! Component: 650 - total flux cleaned = -0.00193159 Jy ! Component: 700 - total flux cleaned = -0.00203953 Jy ! Component: 750 - total flux cleaned = -0.00217125 Jy ! Component: 800 - total flux cleaned = -0.00230004 Jy ! Component: 850 - total flux cleaned = -0.00240119 Jy ! Component: 900 - total flux cleaned = -0.00247555 Jy ! Component: 950 - total flux cleaned = -0.00254821 Jy ! Component: 1000 - total flux cleaned = -0.00257188 Jy ! Component: 1050 - total flux cleaned = -0.00264193 Jy ! Component: 1100 - total flux cleaned = -0.00257286 Jy ! Component: 1150 - total flux cleaned = -0.00259542 Jy ! Component: 1200 - total flux cleaned = -0.00263996 Jy ! Component: 1250 - total flux cleaned = -0.00261776 Jy ! Component: 1300 - total flux cleaned = -0.00266083 Jy ! Component: 1350 - total flux cleaned = -0.0027457 Jy ! Component: 1400 - total flux cleaned = -0.00272475 Jy ! Component: 1450 - total flux cleaned = -0.0027453 Jy ! Component: 1500 - total flux cleaned = -0.00278552 Jy ! Component: 1550 - total flux cleaned = -0.00278527 Jy ! Component: 1600 - total flux cleaned = -0.00282425 Jy ! Component: 1650 - total flux cleaned = -0.00284346 Jy ! Component: 1700 - total flux cleaned = -0.00293814 Jy ! Component: 1750 - total flux cleaned = -0.00286305 Jy ! Component: 1800 - total flux cleaned = -0.00293694 Jy ! Component: 1850 - total flux cleaned = -0.00293661 Jy ! Component: 1900 - total flux cleaned = -0.00291888 Jy ! Component: 1950 - total flux cleaned = -0.00293696 Jy ! Component: 2000 - total flux cleaned = -0.00297191 Jy ! Component: 2050 - total flux cleaned = -0.00297193 Jy ! Component: 2100 - total flux cleaned = -0.00304043 Jy ! Component: 2150 - total flux cleaned = -0.00305705 Jy ! Component: 2200 - total flux cleaned = -0.00304046 Jy ! Component: 2250 - total flux cleaned = -0.00312335 Jy ! Component: 2300 - total flux cleaned = -0.00320531 Jy ! Component: 2350 - total flux cleaned = -0.00314033 Jy ! Component: 2400 - total flux cleaned = -0.00317259 Jy ! Component: 2450 - total flux cleaned = -0.00323603 Jy ! Component: 2500 - total flux cleaned = -0.00328291 Jy ! Component: 2550 - total flux cleaned = -0.0032676 Jy ! Component: 2600 - total flux cleaned = -0.00334464 Jy ! Component: 2650 - total flux cleaned = -0.00337496 Jy ! Component: 2700 - total flux cleaned = -0.00348041 Jy ! Component: 2750 - total flux cleaned = -0.00346549 Jy ! Component: 2800 - total flux cleaned = -0.00352505 Jy ! Component: 2850 - total flux cleaned = -0.00359829 Jy ! Component: 2900 - total flux cleaned = -0.00356907 Jy ! Component: 2950 - total flux cleaned = -0.00367008 Jy ! Component: 3000 - total flux cleaned = -0.00372713 Jy ! Component: 3050 - total flux cleaned = -0.00378381 Jy ! Component: 3100 - total flux cleaned = -0.00386835 Jy ! Component: 3150 - total flux cleaned = -0.003952 Jy ! Component: 3200 - total flux cleaned = -0.00400747 Jy ! Component: 3250 - total flux cleaned = -0.00411725 Jy ! Component: 3300 - total flux cleaned = -0.00417168 Jy ! Component: 3350 - total flux cleaned = -0.0042393 Jy ! Component: 3400 - total flux cleaned = -0.00430646 Jy ! Component: 3450 - total flux cleaned = -0.0044131 Jy ! Component: 3500 - total flux cleaned = -0.00450572 Jy ! Component: 3550 - total flux cleaned = -0.00458469 Jy ! Component: 3600 - total flux cleaned = -0.00466297 Jy ! Component: 3650 - total flux cleaned = -0.00472801 Jy ! Component: 3700 - total flux cleaned = -0.00480545 Jy ! Component: 3750 - total flux cleaned = -0.00490797 Jy ! Component: 3800 - total flux cleaned = -0.00502251 Jy ! Component: 3850 - total flux cleaned = -0.00511094 Jy ! Component: 3900 - total flux cleaned = -0.00516122 Jy ! Component: 3950 - total flux cleaned = -0.00528612 Jy ! Component: 4000 - total flux cleaned = -0.00538541 Jy ! Component: 4050 - total flux cleaned = -0.00543469 Jy ! Total flux subtracted in 4096 components = -0.00553284 Jy ! Clean residual min=-0.000651 max=0.000717 Jy/beam ! Clean residual mean=-0.000003 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.131707 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 412 components and 0.131707 Jy ![Exited script file: muppet] wmap "J1524-3012_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.869 x 8.217 at -0.09073 degrees (North through East) ! Clean map min=-0.0030752 max=0.0944 Jy/beam ! Writing clean map to FITS file: J1524-3012_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0943996 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211693 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.672756 0.672756 1.34551 2.69103 5.38205 10.7641 21.5282 43.0564 86.1128 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.869 x 8.217 at -0.09073 degrees (North through East) ! Clean map min=-0.0030752 max=0.0944 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1524-3012_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:17 2019