! Started logfile: J1523-3338_S_2017_09_26_pus_uvs.log on Sat May 11 13:02:24 2019 obs J1523-3338_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1523-3338_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.490301 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1523-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 20828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1523-3338_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1044 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 820 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2014 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992502Jy sigma=0.006290 ! Fit after self-cal, rms=0.932681Jy sigma=0.005946 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=32.21 mas, bpa=-16.19 degrees ! Estimated noise=1912.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553064 Jy ! Component: 100 - total flux cleaned = 0.0688566 Jy ! Total flux subtracted in 100 components = 0.0688566 Jy ! Clean residual min=-0.005195 max=0.006410 Jy/beam ! Clean residual mean=-0.000030 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.0688566 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0688566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104723Jy sigma=0.000591 ! Fit after self-cal, rms=0.103663Jy sigma=0.000585 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.096 mas, bmaj=35.13 mas, bpa=-13.81 degrees ! Estimated noise=1022.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259641 Jy ! Component: 100 - total flux cleaned = 0.00244988 Jy ! Component: 150 - total flux cleaned = 0.00233286 Jy ! Component: 200 - total flux cleaned = 0.00242681 Jy ! Total flux subtracted in 200 components = 0.00242681 Jy ! Clean residual min=-0.002688 max=0.003180 Jy/beam ! Clean residual mean=-0.000011 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.0712834 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.0712834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103139Jy sigma=0.000583 ! Fit after self-cal, rms=0.102892Jy sigma=0.000583 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.87 KP 0.97 ! LA 1.01 MK 0.97 NL 1.00* OV 1.10 ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.95 KP 1.00 ! LA 0.90 MK 1.00* NL 1.00* OV 1.06 ! PT 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.93 KP 0.99 ! LA 1.04 MK 1.12 NL 0.90 OV 0.95 ! PT 1.02 ! ! ! Correcting IF 4. ! A total of 345 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.74 KP 1.00* ! LA 0.84 MK 1.00* NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Fit before self-cal, rms=0.102892Jy sigma=0.000583 ! Fit after self-cal, rms=0.098009Jy sigma=0.000583 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.051 mas, bmaj=35.71 mas, bpa=-13.77 degrees ! Estimated noise=1027.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578911 Jy ! Component: 100 - total flux cleaned = 0.000706269 Jy ! Component: 150 - total flux cleaned = 0.000765076 Jy ! Component: 200 - total flux cleaned = 0.000820161 Jy ! Total flux subtracted in 200 components = 0.000820161 Jy ! Clean residual min=-0.001941 max=0.001641 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0721035 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.0721035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098001Jy sigma=0.000583 ! Fit after self-cal, rms=0.097748Jy sigma=0.000582 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097748Jy sigma=0.000582 ! Fit after self-cal, rms=0.097217Jy sigma=0.000582 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.021 mas, bmaj=35.69 mas, bpa=-13.75 degrees ! Estimated noise=1026.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551965 Jy ! Component: 100 - total flux cleaned = 0.000675016 Jy ! Component: 150 - total flux cleaned = 0.000746997 Jy ! Component: 200 - total flux cleaned = 0.000796587 Jy ! Total flux subtracted in 200 components = 0.000796587 Jy ! Clean residual min=-0.001677 max=0.001339 Jy/beam ! Clean residual mean=-0.000009 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0729001 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.0729001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097209Jy sigma=0.000582 ! Fit after self-cal, rms=0.097200Jy sigma=0.000582 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.66616e-05 Jy ! Component: 100 - total flux cleaned = -6.59717e-05 Jy ! Component: 150 - total flux cleaned = -1.64382e-05 Jy ! Component: 200 - total flux cleaned = 1.44289e-05 Jy ! Total flux subtracted in 200 components = 1.44289e-05 Jy ! Clean residual min=-0.001777 max=0.001460 Jy/beam ! Clean residual mean=-0.000011 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0729145 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.0729146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097194Jy sigma=0.000582 ! Fit after self-cal, rms=0.097184Jy sigma=0.000582 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097184Jy sigma=0.000582 ! Fit after self-cal, rms=0.097026Jy sigma=0.000582 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.998 mas, bmaj=35.64 mas, bpa=-13.77 degrees ! Estimated noise=1025.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472566 Jy ! Component: 100 - total flux cleaned = 0.00057642 Jy ! Component: 150 - total flux cleaned = 0.000607404 Jy ! Component: 200 - total flux cleaned = 0.000622089 Jy ! Total flux subtracted in 200 components = 0.000622089 Jy ! Clean residual min=-0.001594 max=0.001392 Jy/beam ! Clean residual mean=-0.000010 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0735366 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.0735366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097021Jy sigma=0.000581 ! Fit after self-cal, rms=0.097025Jy sigma=0.000581 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72671e-05 Jy ! Component: 100 - total flux cleaned = 1.73346e-05 Jy ! Component: 150 - total flux cleaned = 3.1857e-05 Jy ! Component: 200 - total flux cleaned = 3.17628e-05 Jy ! Total flux subtracted in 200 components = 3.17628e-05 Jy ! Clean residual min=-0.001650 max=0.001427 Jy/beam ! Clean residual mean=-0.000011 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0735684 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.0735684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097020Jy sigma=0.000581 ! Fit after self-cal, rms=0.097019Jy sigma=0.000581 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097019Jy sigma=0.000581 ! Fit after self-cal, rms=0.096944Jy sigma=0.000581 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.903 mas, bmaj=42.33 mas, bpa=-7.356 degrees ! Estimated noise=1104.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338986 Jy ! Component: 100 - total flux cleaned = 0.000428764 Jy ! Component: 150 - total flux cleaned = 0.000450816 Jy ! Component: 200 - total flux cleaned = 0.000471239 Jy ! Total flux subtracted in 200 components = 0.000471239 Jy ! Clean residual min=-0.001185 max=0.001344 Jy/beam ! Clean residual mean=-0.000013 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0740397 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 129 components and 0.0740396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096942Jy sigma=0.000581 ! Fit after self-cal, rms=0.096944Jy sigma=0.000581 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.28273e-05 Jy ! Component: 100 - total flux cleaned = 6.23369e-05 Jy ! Component: 150 - total flux cleaned = 6.8366e-05 Jy ! Component: 200 - total flux cleaned = 7.98651e-05 Jy ! Total flux subtracted in 200 components = 7.98651e-05 Jy ! Clean residual min=-0.001196 max=0.001344 Jy/beam ! Clean residual mean=-0.000013 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0741195 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 136 components and 0.0741195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096943Jy sigma=0.000581 ! Fit after self-cal, rms=0.096945Jy sigma=0.000581 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.976 mas, bmaj=35.62 mas, bpa=-13.79 degrees ! Estimated noise=1025.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.976 x 35.62 at -13.79 degrees (North through East) ! Clean map min=-0.0015947 max=0.072995 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=32.34 mas, bpa=-16.04 degrees ! Estimated noise=1867.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0546564 Jy ! Component: 100 - total flux cleaned = 0.0674038 Jy ! Component: 150 - total flux cleaned = 0.0722158 Jy ! Component: 200 - total flux cleaned = 0.0738165 Jy ! Total flux subtracted in 200 components = 0.0738165 Jy ! Clean residual min=-0.003701 max=0.003431 Jy/beam ! Clean residual mean=-0.000009 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.0738165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0738165 Jy ! Inverting map and beam ! Estimated beam: bmin=4.976 mas, bmaj=35.62 mas, bpa=-13.79 degrees ! Estimated noise=1025.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335519 Jy ! Component: 100 - total flux cleaned = -0.000443429 Jy ! Component: 150 - total flux cleaned = -0.000398968 Jy ! Component: 200 - total flux cleaned = -0.000322312 Jy ! Total flux subtracted in 200 components = -0.000322312 Jy ! Clean residual min=-0.001826 max=0.001567 Jy/beam ! Clean residual mean=-0.000012 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0734941 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 66 components and 0.0734942 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.903 mas, bmaj=42.33 mas, bpa=-7.356 degrees ! Estimated noise=1104.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107169 Jy ! Component: 100 - total flux cleaned = 0.000162111 Jy ! Component: 150 - total flux cleaned = 0.000173214 Jy ! Component: 200 - total flux cleaned = 0.000184194 Jy ! Total flux subtracted in 200 components = 0.000184194 Jy ! Clean residual min=-0.001219 max=0.001340 Jy/beam ! Clean residual mean=-0.000015 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0736783 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.63399e-06 Jy ! Component: 100 - total flux cleaned = 1.9428e-05 Jy ! Component: 150 - total flux cleaned = 2.89454e-05 Jy ! Component: 200 - total flux cleaned = 4.57063e-05 Jy ! Total flux subtracted in 200 components = 4.57063e-05 Jy ! Clean residual min=-0.001207 max=0.001346 Jy/beam ! Clean residual mean=-0.000015 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0737241 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.0737241 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.976 mas, bmaj=35.62 mas, bpa=-13.79 degrees ! Estimated noise=1025.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.78885e-05 Jy ! Component: 100 - total flux cleaned = -0.000101497 Jy ! Component: 150 - total flux cleaned = -0.000100997 Jy ! Component: 200 - total flux cleaned = -8.06698e-05 Jy ! Total flux subtracted in 200 components = -8.06698e-05 Jy ! Clean residual min=-0.001762 max=0.001568 Jy/beam ! Clean residual mean=-0.000011 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0736434 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 0.0736434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096964Jy sigma=0.000581 ! Fit after self-cal, rms=0.096989Jy sigma=0.000581 wmodel J1523-3338_S_2017_09_26_pus_map.mod ! Writing 98 model components to file: J1523-3338_S_2017_09_26_pus_map.mod wobs J1523-3338_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1523-3338_S_2017_09_26_pus_uvs.fits wwins J1523-3338_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1523-3338_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425744 Jy ! Component: 100 - total flux cleaned = -0.000612263 Jy ! Component: 150 - total flux cleaned = -0.000468314 Jy ! Component: 200 - total flux cleaned = -0.000377586 Jy ! Component: 250 - total flux cleaned = -0.000267845 Jy ! Component: 300 - total flux cleaned = -0.000183461 Jy ! Component: 350 - total flux cleaned = -8.12654e-05 Jy ! Component: 400 - total flux cleaned = 3.68727e-05 Jy ! Component: 450 - total flux cleaned = 0.000113058 Jy ! Component: 500 - total flux cleaned = 0.000187554 Jy ! Component: 550 - total flux cleaned = 0.000278498 Jy ! Component: 600 - total flux cleaned = 0.000349404 Jy ! Component: 650 - total flux cleaned = 0.000470324 Jy ! Component: 700 - total flux cleaned = 0.0005206 Jy ! Component: 750 - total flux cleaned = 0.000603236 Jy ! Component: 800 - total flux cleaned = 0.000700488 Jy ! Component: 850 - total flux cleaned = 0.000795649 Jy ! Component: 900 - total flux cleaned = 0.000857936 Jy ! Component: 950 - total flux cleaned = 0.000918885 Jy ! Component: 1000 - total flux cleaned = 0.000963575 Jy ! Component: 1050 - total flux cleaned = 0.00094876 Jy ! Component: 1100 - total flux cleaned = 0.000992201 Jy ! Component: 1150 - total flux cleaned = 0.00104896 Jy ! Component: 1200 - total flux cleaned = 0.00113267 Jy ! Component: 1250 - total flux cleaned = 0.0012013 Jy ! Component: 1300 - total flux cleaned = 0.00124197 Jy ! Component: 1350 - total flux cleaned = 0.00132226 Jy ! Component: 1400 - total flux cleaned = 0.0013621 Jy ! Component: 1450 - total flux cleaned = 0.00146604 Jy ! Component: 1500 - total flux cleaned = 0.00154276 Jy ! Component: 1550 - total flux cleaned = 0.0015806 Jy ! Component: 1600 - total flux cleaned = 0.00160568 Jy ! Component: 1650 - total flux cleaned = 0.00165497 Jy ! Component: 1700 - total flux cleaned = 0.00165495 Jy ! Component: 1750 - total flux cleaned = 0.00166707 Jy ! Component: 1800 - total flux cleaned = 0.00171477 Jy ! Component: 1850 - total flux cleaned = 0.0017384 Jy ! Component: 1900 - total flux cleaned = 0.0017968 Jy ! Component: 1950 - total flux cleaned = 0.00183155 Jy ! Component: 2000 - total flux cleaned = 0.00186607 Jy ! Component: 2050 - total flux cleaned = 0.00185463 Jy ! Component: 2100 - total flux cleaned = 0.00187736 Jy ! Component: 2150 - total flux cleaned = 0.00189994 Jy ! Component: 2200 - total flux cleaned = 0.0019223 Jy ! Component: 2250 - total flux cleaned = 0.00194452 Jy ! Component: 2300 - total flux cleaned = 0.00194453 Jy ! Component: 2350 - total flux cleaned = 0.00194459 Jy ! Component: 2400 - total flux cleaned = 0.00196642 Jy ! Component: 2450 - total flux cleaned = 0.00197733 Jy ! Component: 2500 - total flux cleaned = 0.00198818 Jy ! Component: 2550 - total flux cleaned = 0.00198818 Jy ! Component: 2600 - total flux cleaned = 0.00199885 Jy ! Component: 2650 - total flux cleaned = 0.00200956 Jy ! Component: 2700 - total flux cleaned = 0.00200961 Jy ! Component: 2750 - total flux cleaned = 0.00200969 Jy ! Component: 2800 - total flux cleaned = 0.00204138 Jy ! Component: 2850 - total flux cleaned = 0.0020519 Jy ! Component: 2900 - total flux cleaned = 0.00206241 Jy ! Component: 2950 - total flux cleaned = 0.00210417 Jy ! Component: 3000 - total flux cleaned = 0.00211457 Jy ! Component: 3050 - total flux cleaned = 0.00212502 Jy ! Component: 3100 - total flux cleaned = 0.0021458 Jy ! Component: 3150 - total flux cleaned = 0.00215617 Jy ! Component: 3200 - total flux cleaned = 0.0021561 Jy ! Component: 3250 - total flux cleaned = 0.00218702 Jy ! Component: 3300 - total flux cleaned = 0.00218704 Jy ! Component: 3350 - total flux cleaned = 0.00218705 Jy ! Component: 3400 - total flux cleaned = 0.00221796 Jy ! Component: 3450 - total flux cleaned = 0.00219738 Jy ! Component: 3500 - total flux cleaned = 0.00220762 Jy ! Component: 3550 - total flux cleaned = 0.00222811 Jy ! Component: 3600 - total flux cleaned = 0.0022384 Jy ! Component: 3650 - total flux cleaned = 0.0022487 Jy ! Component: 3700 - total flux cleaned = 0.00224868 Jy ! Component: 3750 - total flux cleaned = 0.00225897 Jy ! Component: 3800 - total flux cleaned = 0.00226925 Jy ! Component: 3850 - total flux cleaned = 0.00228977 Jy ! Component: 3900 - total flux cleaned = 0.00227938 Jy ! Component: 3950 - total flux cleaned = 0.00227935 Jy ! Component: 4000 - total flux cleaned = 0.00225872 Jy ! Component: 4050 - total flux cleaned = 0.00226896 Jy ! Total flux subtracted in 4096 components = 0.00230002 Jy ! Clean residual min=-0.000588 max=0.000551 Jy/beam ! Clean residual mean=-0.000003 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0759434 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 371 components and 0.0759434 Jy ![Exited script file: muppet] wmap "J1523-3338_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.976 x 35.62 at -13.79 degrees (North through East) ! Clean map min=-0.0016614 max=0.071479 Jy/beam ! Writing clean map to FITS file: J1523-3338_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.071479 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210589 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.883851 0.883851 1.7677 3.5354 7.07081 14.1416 28.2832 56.5665 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.976 x 35.62 at -13.79 degrees (North through East) ! Clean map min=-0.0016614 max=0.071479 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1523-3338_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:02:30 2019