! Started logfile: J1523-3338_S_2017_06_10_pus_uvs.log on Mon May 6 14:57:09 2019 obs J1523-3338_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1523-3338_S_2017_06_10_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.302339 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1523-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 6204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1523-3338_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 720 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 930 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 855 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1050 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002538Jy sigma=0.007469 ! Fit after self-cal, rms=0.950810Jy sigma=0.007057 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.325 mas, bmaj=6.925 mas, bpa=2.099 degrees ! Estimated noise=2161.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420022 Jy ! Component: 100 - total flux cleaned = 0.0512592 Jy ! Total flux subtracted in 100 components = 0.0512592 Jy ! Clean residual min=-0.007216 max=0.006183 Jy/beam ! Clean residual mean=0.000001 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.0512592 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0512592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088126Jy sigma=0.000623 ! Fit after self-cal, rms=0.086404Jy sigma=0.000610 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.715 mas, bpa=-0.08064 degrees ! Estimated noise=1794.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398164 Jy ! Component: 100 - total flux cleaned = 0.00466541 Jy ! Component: 150 - total flux cleaned = 0.00483688 Jy ! Component: 200 - total flux cleaned = 0.00483713 Jy ! Total flux subtracted in 200 components = 0.00483713 Jy ! Clean residual min=-0.004017 max=0.004369 Jy/beam ! Clean residual mean=0.000027 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.0560963 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.0560963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086189Jy sigma=0.000609 ! Fit after self-cal, rms=0.086186Jy sigma=0.000609 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.05 ! LA 1.07 MK 0.98 NL 1.00* OV 0.95 ! PT 1.10 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.02 ! LA 0.96 MK 1.00 NL 1.00* OV 1.16 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.96 ! LA 1.06 MK 0.86 NL 0.87 OV 0.94 ! PT 0.97 SC 0.91 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.086186Jy sigma=0.000609 ! Fit after self-cal, rms=0.085195Jy sigma=0.000615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=7.532 mas, bpa=0.7615 degrees ! Estimated noise=1837.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134388 Jy ! Component: 100 - total flux cleaned = 0.00134475 Jy ! Component: 150 - total flux cleaned = 0.00127403 Jy ! Component: 200 - total flux cleaned = 0.00121125 Jy ! Total flux subtracted in 200 components = 0.00121125 Jy ! Clean residual min=-0.004138 max=0.004497 Jy/beam ! Clean residual mean=0.000008 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.0573076 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0573076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085146Jy sigma=0.000615 ! Fit after self-cal, rms=0.085143Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085143Jy sigma=0.000614 ! Fit after self-cal, rms=0.085095Jy sigma=0.000614 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=7.468 mas, bpa=0.7558 degrees ! Estimated noise=1829.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000999364 Jy ! Component: 100 - total flux cleaned = 0.00100082 Jy ! Component: 150 - total flux cleaned = 0.000941557 Jy ! Component: 200 - total flux cleaned = 0.000890175 Jy ! Total flux subtracted in 200 components = 0.000890175 Jy ! Clean residual min=-0.004182 max=0.004374 Jy/beam ! Clean residual mean=0.000009 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0581978 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0581978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085064Jy sigma=0.000614 ! Fit after self-cal, rms=0.085081Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289791 Jy ! Component: 100 - total flux cleaned = 0.000229632 Jy ! Component: 150 - total flux cleaned = 0.000176965 Jy ! Component: 200 - total flux cleaned = 0.000152865 Jy ! Total flux subtracted in 200 components = 0.000152865 Jy ! Clean residual min=-0.004239 max=0.004111 Jy/beam ! Clean residual mean=0.000004 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.0583506 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.0583506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085063Jy sigma=0.000614 ! Fit after self-cal, rms=0.085057Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085057Jy sigma=0.000614 ! Fit after self-cal, rms=0.085348Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=7.414 mas, bpa=0.9192 degrees ! Estimated noise=1829.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696456 Jy ! Component: 100 - total flux cleaned = 0.000669221 Jy ! Component: 150 - total flux cleaned = 0.000616489 Jy ! Component: 200 - total flux cleaned = 0.00059235 Jy ! Total flux subtracted in 200 components = 0.00059235 Jy ! Clean residual min=-0.004213 max=0.004025 Jy/beam ! Clean residual mean=0.000004 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.058943 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 35 components and 0.058943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085329Jy sigma=0.000613 ! Fit after self-cal, rms=0.085357Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145196 Jy ! Component: 100 - total flux cleaned = 0.000120313 Jy ! Component: 150 - total flux cleaned = 7.81611e-05 Jy ! Component: 200 - total flux cleaned = 5.86933e-05 Jy ! Total flux subtracted in 200 components = 5.86933e-05 Jy ! Clean residual min=-0.004281 max=0.003772 Jy/beam ! Clean residual mean=0.000002 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.0590017 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0590017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085347Jy sigma=0.000613 ! Fit after self-cal, rms=0.085342Jy sigma=0.000613 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085342Jy sigma=0.000613 ! Fit after self-cal, rms=0.085378Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.216 mas, bmaj=25.49 mas, bpa=3.503 degrees ! Estimated noise=2651.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443147 Jy ! Component: 100 - total flux cleaned = 0.000444693 Jy ! Component: 150 - total flux cleaned = 0.000445475 Jy ! Component: 200 - total flux cleaned = 0.000445898 Jy ! Total flux subtracted in 200 components = 0.000445898 Jy ! Clean residual min=-0.003392 max=0.003404 Jy/beam ! Clean residual mean=0.000007 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0594476 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 40 components and 0.0594476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085374Jy sigma=0.000613 ! Fit after self-cal, rms=0.085390Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.91607e-06 Jy ! Component: 100 - total flux cleaned = -5.52332e-06 Jy ! Component: 150 - total flux cleaned = -6.36638e-06 Jy ! Component: 200 - total flux cleaned = -6.77908e-06 Jy ! Total flux subtracted in 200 components = -6.77908e-06 Jy ! Clean residual min=-0.003433 max=0.003432 Jy/beam ! Clean residual mean=0.000004 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.0594408 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 42 components and 0.0594408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085388Jy sigma=0.000613 ! Fit after self-cal, rms=0.085338Jy sigma=0.000613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.362 mas, bpa=1.015 degrees ! Estimated noise=1823.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 7.362 at 1.015 degrees (North through East) ! Clean map min=-0.0038352 max=0.056264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.238 mas, bmaj=6.789 mas, bpa=2.828 degrees ! Estimated noise=2103.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423775 Jy ! Component: 100 - total flux cleaned = 0.0529901 Jy ! Component: 150 - total flux cleaned = 0.0578229 Jy ! Component: 200 - total flux cleaned = 0.0585557 Jy ! Total flux subtracted in 200 components = 0.0585557 Jy ! Clean residual min=-0.005863 max=0.004859 Jy/beam ! Clean residual mean=-0.000004 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.0585557 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0585557 Jy ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.362 mas, bpa=1.015 degrees ! Estimated noise=1823.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103003 Jy ! Component: 100 - total flux cleaned = 0.000961313 Jy ! Component: 150 - total flux cleaned = 0.000904894 Jy ! Component: 200 - total flux cleaned = 0.000852961 Jy ! Total flux subtracted in 200 components = 0.000852961 Jy ! Clean residual min=-0.004342 max=0.003436 Jy/beam ! Clean residual mean=0.000001 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.0594087 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0594087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.216 mas, bmaj=25.49 mas, bpa=3.503 degrees ! Estimated noise=2651.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175575 Jy ! Component: 100 - total flux cleaned = 0.000172311 Jy ! Component: 150 - total flux cleaned = 0.000170303 Jy ! Component: 200 - total flux cleaned = 0.000169537 Jy ! Total flux subtracted in 200 components = 0.000169537 Jy ! Clean residual min=-0.003839 max=0.003307 Jy/beam ! Clean residual mean=0.000003 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.0595782 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.54942e-07 Jy ! Component: 100 - total flux cleaned = -1.60446e-06 Jy ! Component: 150 - total flux cleaned = -1.65235e-05 Jy ! Component: 200 - total flux cleaned = -3.03978e-05 Jy ! Total flux subtracted in 200 components = -3.03978e-05 Jy ! Clean residual min=-0.003763 max=0.003346 Jy/beam ! Clean residual mean=0.000002 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.0595478 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0595478 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.362 mas, bpa=1.015 degrees ! Estimated noise=1823.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370631 Jy ! Component: 100 - total flux cleaned = -0.000252418 Jy ! Component: 150 - total flux cleaned = -0.000185973 Jy ! Component: 200 - total flux cleaned = -0.000154967 Jy ! Total flux subtracted in 200 components = -0.000154967 Jy ! Clean residual min=-0.004313 max=0.003441 Jy/beam ! Clean residual mean=0.000001 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.0593928 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0593928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085363Jy sigma=0.000613 ! Fit after self-cal, rms=0.085355Jy sigma=0.000613 wmodel J1523-3338_S_2017_06_10_pus_map.mod ! Writing 38 model components to file: J1523-3338_S_2017_06_10_pus_map.mod wobs J1523-3338_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1523-3338_S_2017_06_10_pus_uvs.fits wwins J1523-3338_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1523-3338_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177193 Jy ! Component: 100 - total flux cleaned = -0.00244832 Jy ! Component: 150 - total flux cleaned = -0.00267701 Jy ! Component: 200 - total flux cleaned = -0.00300256 Jy ! Component: 250 - total flux cleaned = -0.0033102 Jy ! Component: 300 - total flux cleaned = -0.00350465 Jy ! Component: 350 - total flux cleaned = -0.00369024 Jy ! Component: 400 - total flux cleaned = -0.00382396 Jy ! Component: 450 - total flux cleaned = -0.00386637 Jy ! Component: 500 - total flux cleaned = -0.00378451 Jy ! Component: 550 - total flux cleaned = -0.00394563 Jy ! Component: 600 - total flux cleaned = -0.00390708 Jy ! Component: 650 - total flux cleaned = -0.00398317 Jy ! Component: 700 - total flux cleaned = -0.00401895 Jy ! Component: 750 - total flux cleaned = -0.00401933 Jy ! Component: 800 - total flux cleaned = -0.00412459 Jy ! Component: 850 - total flux cleaned = -0.00419304 Jy ! Component: 900 - total flux cleaned = -0.00422605 Jy ! Component: 950 - total flux cleaned = -0.00432283 Jy ! Component: 1000 - total flux cleaned = -0.00435401 Jy ! Component: 1050 - total flux cleaned = -0.0043849 Jy ! Component: 1100 - total flux cleaned = -0.0043849 Jy ! Component: 1150 - total flux cleaned = -0.0044724 Jy ! Component: 1200 - total flux cleaned = -0.00447177 Jy ! Component: 1250 - total flux cleaned = -0.00444344 Jy ! Component: 1300 - total flux cleaned = -0.00444319 Jy ! Component: 1350 - total flux cleaned = -0.00444209 Jy ! Component: 1400 - total flux cleaned = -0.00436386 Jy ! Component: 1450 - total flux cleaned = -0.00433824 Jy ! Component: 1500 - total flux cleaned = -0.00438809 Jy ! Component: 1550 - total flux cleaned = -0.00438719 Jy ! Component: 1600 - total flux cleaned = -0.00433818 Jy ! Component: 1650 - total flux cleaned = -0.00421966 Jy ! Component: 1700 - total flux cleaned = -0.0042198 Jy ! Component: 1750 - total flux cleaned = -0.00417407 Jy ! Component: 1800 - total flux cleaned = -0.00408483 Jy ! Component: 1850 - total flux cleaned = -0.00397448 Jy ! Component: 1900 - total flux cleaned = -0.00380122 Jy ! Component: 1950 - total flux cleaned = -0.00363065 Jy ! Component: 2000 - total flux cleaned = -0.00360912 Jy ! Component: 2050 - total flux cleaned = -0.00342313 Jy ! Component: 2100 - total flux cleaned = -0.00328066 Jy ! Component: 2150 - total flux cleaned = -0.00318046 Jy ! Component: 2200 - total flux cleaned = -0.00308153 Jy ! Component: 2250 - total flux cleaned = -0.0029254 Jy ! Component: 2300 - total flux cleaned = -0.0027713 Jy ! Component: 2350 - total flux cleaned = -0.00263783 Jy ! Component: 2400 - total flux cleaned = -0.00243079 Jy ! Component: 2450 - total flux cleaned = -0.00224468 Jy ! Component: 2500 - total flux cleaned = -0.00200562 Jy ! Component: 2550 - total flux cleaned = -0.0017872 Jy ! Component: 2600 - total flux cleaned = -0.00160713 Jy ! Component: 2650 - total flux cleaned = -0.00142877 Jy ! Component: 2700 - total flux cleaned = -0.00126996 Jy ! Component: 2750 - total flux cleaned = -0.00114747 Jy ! Component: 2800 - total flux cleaned = -0.000973962 Jy ! Component: 2850 - total flux cleaned = -0.000784945 Jy ! Component: 2900 - total flux cleaned = -0.000631623 Jy ! Component: 2950 - total flux cleaned = -0.000496523 Jy ! Component: 3000 - total flux cleaned = -0.000362194 Jy ! Component: 3050 - total flux cleaned = -0.000178544 Jy ! Component: 3100 - total flux cleaned = -4.6058e-05 Jy ! Component: 3150 - total flux cleaned = 6.92221e-05 Jy ! Component: 3200 - total flux cleaned = 0.000183883 Jy ! Component: 3250 - total flux cleaned = 0.000297869 Jy ! Component: 3300 - total flux cleaned = 0.000394975 Jy ! Component: 3350 - total flux cleaned = 0.00050774 Jy ! Component: 3400 - total flux cleaned = 0.000588071 Jy ! Component: 3450 - total flux cleaned = 0.000747654 Jy ! Component: 3500 - total flux cleaned = 0.000811163 Jy ! Component: 3550 - total flux cleaned = 0.000921987 Jy ! Component: 3600 - total flux cleaned = 0.00103244 Jy ! Component: 3650 - total flux cleaned = 0.00111108 Jy ! Component: 3700 - total flux cleaned = 0.00122099 Jy ! Component: 3750 - total flux cleaned = 0.0013149 Jy ! Component: 3800 - total flux cleaned = 0.00140851 Jy ! Component: 3850 - total flux cleaned = 0.00145525 Jy ! Component: 3900 - total flux cleaned = 0.00156407 Jy ! Component: 3950 - total flux cleaned = 0.00164159 Jy ! Component: 4000 - total flux cleaned = 0.00168811 Jy ! Component: 4050 - total flux cleaned = 0.00173449 Jy ! Total flux subtracted in 4096 components = 0.00181174 Jy ! Clean residual min=-0.000945 max=0.000851 Jy/beam ! Clean residual mean=0.000010 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0612046 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 281 components and 0.0612045 Jy ![Exited script file: muppet] wmap "J1523-3338_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 7.362 at 1.015 degrees (North through East) ! Clean map min=-0.0025565 max=0.054606 Jy/beam ! Writing clean map to FITS file: J1523-3338_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0546055 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255758 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.40512 1.40512 2.81024 5.62048 11.241 22.4819 44.9638 89.9277 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 7.362 at 1.015 degrees (North through East) ! Clean map min=-0.0025565 max=0.054606 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1523-3338_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:13 2019