! Started logfile: J1522-2730_S_2017_08_12_pus_uvs.log on Fri May 10 15:02:19 2019 obs J1522-2730_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1522-2730_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.579487 visibilities/baseline/integration-bin. ! Found source: J1522-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1522-2730_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.327948Jy sigma=0.001999 ! Fit after self-cal, rms=0.266350Jy sigma=0.001576 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=7.451 mas, bpa=-7.718 degrees ! Estimated noise=4541.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.590986 Jy ! Component: 100 - total flux cleaned = 0.729997 Jy ! Total flux subtracted in 100 components = 0.729997 Jy ! Clean residual min=-0.025887 max=0.051847 Jy/beam ! Clean residual mean=0.000083 rms=0.009746 Jy/beam ! Combined flux in latest and established models = 0.729997 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.729997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142863Jy sigma=0.000890 ! Fit after self-cal, rms=0.142907Jy sigma=0.000890 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=8.609 mas, bpa=-5.64 degrees ! Estimated noise=3946.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620617 Jy ! Component: 100 - total flux cleaned = 0.092789 Jy ! Component: 150 - total flux cleaned = 0.111085 Jy ! Component: 200 - total flux cleaned = 0.122096 Jy ! Total flux subtracted in 200 components = 0.122096 Jy ! Clean residual min=-0.015956 max=0.020611 Jy/beam ! Clean residual mean=0.000030 rms=0.004557 Jy/beam ! Combined flux in latest and established models = 0.852093 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.852093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115492Jy sigma=0.000695 ! Fit after self-cal, rms=0.115547Jy sigma=0.000694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.05 ! LA 1.02 MK 1.00* NL 1.00* OV 1.01 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.11 KP 1.00 ! LA 0.96 MK 1.00* NL 0.99 OV 1.03 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 0.98 ! LA 0.97 MK 0.98 NL 0.95 OV 0.94 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.115547Jy sigma=0.000694 ! Fit after self-cal, rms=0.104046Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.992 mas, bpa=-3.496 degrees ! Estimated noise=3974.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321146 Jy ! Component: 100 - total flux cleaned = -0.00376068 Jy ! Component: 150 - total flux cleaned = -0.00412824 Jy ! Component: 200 - total flux cleaned = -0.00444045 Jy ! Total flux subtracted in 200 components = -0.00444045 Jy ! Clean residual min=-0.008730 max=0.008249 Jy/beam ! Clean residual mean=0.000002 rms=0.002296 Jy/beam ! Combined flux in latest and established models = 0.847653 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 0.847653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103771Jy sigma=0.000630 ! Fit after self-cal, rms=0.103771Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103771Jy sigma=0.000630 ! Fit after self-cal, rms=0.103929Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=9.002 mas, bpa=-3.444 degrees ! Estimated noise=3974.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195432 Jy ! Component: 100 - total flux cleaned = -0.00226588 Jy ! Component: 150 - total flux cleaned = -0.00240413 Jy ! Component: 200 - total flux cleaned = -0.0025341 Jy ! Total flux subtracted in 200 components = -0.0025341 Jy ! Clean residual min=-0.008237 max=0.008396 Jy/beam ! Clean residual mean=0.000001 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.845118 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.845118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103787Jy sigma=0.000630 ! Fit after self-cal, rms=0.103770Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000301793 Jy ! Component: 100 - total flux cleaned = -0.000300234 Jy ! Component: 150 - total flux cleaned = -0.000298227 Jy ! Component: 200 - total flux cleaned = -0.000405181 Jy ! Total flux subtracted in 200 components = -0.000405181 Jy ! Clean residual min=-0.007898 max=0.008379 Jy/beam ! Clean residual mean=0.000001 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 0.844713 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.844713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103694Jy sigma=0.000629 ! Fit after self-cal, rms=0.103680Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103680Jy sigma=0.000629 ! Fit after self-cal, rms=0.103783Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=9.008 mas, bpa=-3.413 degrees ! Estimated noise=3975.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157704 Jy ! Component: 100 - total flux cleaned = -0.00175678 Jy ! Component: 150 - total flux cleaned = -0.00181161 Jy ! Component: 200 - total flux cleaned = -0.00191416 Jy ! Total flux subtracted in 200 components = -0.00191416 Jy ! Clean residual min=-0.007663 max=0.008437 Jy/beam ! Clean residual mean=-0.000000 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.842799 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.842799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103697Jy sigma=0.000629 ! Fit after self-cal, rms=0.103689Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191259 Jy ! Component: 100 - total flux cleaned = -0.000189971 Jy ! Component: 150 - total flux cleaned = -0.000240557 Jy ! Component: 200 - total flux cleaned = -0.000284187 Jy ! Total flux subtracted in 200 components = -0.000284187 Jy ! Clean residual min=-0.007668 max=0.008401 Jy/beam ! Clean residual mean=-0.000000 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 0.842515 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.842515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103635Jy sigma=0.000628 ! Fit after self-cal, rms=0.103627Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103627Jy sigma=0.000628 ! Fit after self-cal, rms=0.103673Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.118 mas, bmaj=17.49 mas, bpa=-5.814 degrees ! Estimated noise=5117.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000967416 Jy ! Component: 100 - total flux cleaned = -0.000965026 Jy ! Component: 150 - total flux cleaned = -0.000941559 Jy ! Component: 200 - total flux cleaned = -0.000921053 Jy ! Total flux subtracted in 200 components = -0.000921053 Jy ! Clean residual min=-0.006092 max=0.005901 Jy/beam ! Clean residual mean=-0.000005 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 0.841594 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.841594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103668Jy sigma=0.000628 ! Fit after self-cal, rms=0.103661Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.47759e-05 Jy ! Component: 100 - total flux cleaned = -4.33598e-05 Jy ! Component: 150 - total flux cleaned = -7.95987e-06 Jy ! Component: 200 - total flux cleaned = 8.7847e-06 Jy ! Total flux subtracted in 200 components = 8.7847e-06 Jy ! Clean residual min=-0.006012 max=0.005940 Jy/beam ! Clean residual mean=-0.000005 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.841603 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 44 components and 0.841603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103670Jy sigma=0.000628 ! Fit after self-cal, rms=0.103664Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=9.011 mas, bpa=-3.395 degrees ! Estimated noise=3974.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.227 x 9.011 at -3.395 degrees (North through East) ! Clean map min=-0.0073692 max=0.77239 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103664Jy sigma=0.000628 ! Fit after self-cal, rms=0.095827Jy sigma=0.000570 ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=9.022 mas, bpa=-3.38 degrees ! Estimated noise=3970.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177167 Jy ! Component: 100 - total flux cleaned = -0.00215693 Jy ! Component: 150 - total flux cleaned = -0.00230757 Jy ! Component: 200 - total flux cleaned = -0.00240083 Jy ! Total flux subtracted in 200 components = -0.00240083 Jy ! Clean residual min=-0.007841 max=0.008241 Jy/beam ! Clean residual mean=-0.000000 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.839202 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.839202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095731Jy sigma=0.000570 ! Fit after self-cal, rms=0.095724Jy sigma=0.000570 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260567 Jy ! Component: 100 - total flux cleaned = -0.000391034 Jy ! Component: 150 - total flux cleaned = -0.000473891 Jy ! Component: 200 - total flux cleaned = -0.000555197 Jy ! Total flux subtracted in 200 components = -0.000555197 Jy ! Clean residual min=-0.007859 max=0.008179 Jy/beam ! Clean residual mean=0.000000 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.838647 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.838647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095675Jy sigma=0.000569 ! Fit after self-cal, rms=0.095672Jy sigma=0.000569 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095672Jy sigma=0.000569 ! Fit after self-cal, rms=0.095740Jy sigma=0.000569 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=7.729 mas, bpa=-5.039 degrees ! Estimated noise=4598.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.599308 Jy ! Component: 100 - total flux cleaned = 0.734235 Jy ! Component: 150 - total flux cleaned = 0.776892 Jy ! Component: 200 - total flux cleaned = 0.796237 Jy ! Total flux subtracted in 200 components = 0.796237 Jy ! Clean residual min=-0.011597 max=0.014847 Jy/beam ! Clean residual mean=0.000027 rms=0.003340 Jy/beam ! Combined flux in latest and established models = 0.796238 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.796238 Jy ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.027 mas, bpa=-3.363 degrees ! Estimated noise=3968.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177915 Jy ! Component: 100 - total flux cleaned = 0.0279023 Jy ! Component: 150 - total flux cleaned = 0.0338192 Jy ! Component: 200 - total flux cleaned = 0.0373226 Jy ! Total flux subtracted in 200 components = 0.0373226 Jy ! Clean residual min=-0.008197 max=0.008089 Jy/beam ! Clean residual mean=0.000003 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.83356 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.83356 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.125 mas, bmaj=17.54 mas, bpa=-5.843 degrees ! Estimated noise=5103.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318698 Jy ! Component: 100 - total flux cleaned = 0.00375855 Jy ! Component: 150 - total flux cleaned = 0.00382765 Jy ! Component: 200 - total flux cleaned = 0.00389102 Jy ! Total flux subtracted in 200 components = 0.00389102 Jy ! Clean residual min=-0.005811 max=0.006013 Jy/beam ! Clean residual mean=-0.000004 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 0.837451 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.85707e-05 Jy ! Component: 100 - total flux cleaned = 8.62521e-05 Jy ! Component: 150 - total flux cleaned = 0.000113994 Jy ! Component: 200 - total flux cleaned = 0.000141293 Jy ! Total flux subtracted in 200 components = 0.000141293 Jy ! Clean residual min=-0.005800 max=0.005944 Jy/beam ! Clean residual mean=-0.000005 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.837592 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.837592 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.027 mas, bpa=-3.363 degrees ! Estimated noise=3968.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155754 Jy ! Component: 100 - total flux cleaned = -7.48012e-05 Jy ! Component: 150 - total flux cleaned = -0.000229879 Jy ! Component: 200 - total flux cleaned = -0.000278641 Jy ! Total flux subtracted in 200 components = -0.000278641 Jy ! Clean residual min=-0.007655 max=0.007804 Jy/beam ! Clean residual mean=-0.000002 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.837314 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.837314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095744Jy sigma=0.000570 ! Fit after self-cal, rms=0.095711Jy sigma=0.000569 wmodel J1522-2730_S_2017_08_12_pus_map.mod ! Writing 57 model components to file: J1522-2730_S_2017_08_12_pus_map.mod wobs J1522-2730_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1522-2730_S_2017_08_12_pus_uvs.fits wwins J1522-2730_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1522-2730_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581805 Jy ! Component: 100 - total flux cleaned = 9.07562e-05 Jy ! Component: 150 - total flux cleaned = -0.000580439 Jy ! Component: 200 - total flux cleaned = -0.00152888 Jy ! Component: 250 - total flux cleaned = -0.00282574 Jy ! Component: 300 - total flux cleaned = -0.0033929 Jy ! Component: 350 - total flux cleaned = -0.0039322 Jy ! Component: 400 - total flux cleaned = -0.00436113 Jy ! Component: 450 - total flux cleaned = -0.00493569 Jy ! Component: 500 - total flux cleaned = -0.00540759 Jy ! Component: 550 - total flux cleaned = -0.00607947 Jy ! Component: 600 - total flux cleaned = -0.00629428 Jy ! Component: 650 - total flux cleaned = -0.00684843 Jy ! Component: 700 - total flux cleaned = -0.00724676 Jy ! Component: 750 - total flux cleaned = -0.00756667 Jy ! Component: 800 - total flux cleaned = -0.00775098 Jy ! Component: 850 - total flux cleaned = -0.00799152 Jy ! Component: 900 - total flux cleaned = -0.00810837 Jy ! Component: 950 - total flux cleaned = -0.00810999 Jy ! Component: 1000 - total flux cleaned = -0.00821896 Jy ! Component: 1050 - total flux cleaned = -0.00816564 Jy ! Component: 1100 - total flux cleaned = -0.00811385 Jy ! Component: 1150 - total flux cleaned = -0.0080121 Jy ! Component: 1200 - total flux cleaned = -0.00811114 Jy ! Component: 1250 - total flux cleaned = -0.00806168 Jy ! Component: 1300 - total flux cleaned = -0.00810925 Jy ! Component: 1350 - total flux cleaned = -0.00810872 Jy ! Component: 1400 - total flux cleaned = -0.00801647 Jy ! Component: 1450 - total flux cleaned = -0.00806248 Jy ! Component: 1500 - total flux cleaned = -0.00806249 Jy ! Component: 1550 - total flux cleaned = -0.00815124 Jy ! Component: 1600 - total flux cleaned = -0.00828289 Jy ! Component: 1650 - total flux cleaned = -0.00828284 Jy ! Component: 1700 - total flux cleaned = -0.00841218 Jy ! Component: 1750 - total flux cleaned = -0.00845469 Jy ! Component: 1800 - total flux cleaned = -0.00845468 Jy ! Component: 1850 - total flux cleaned = -0.00853971 Jy ! Component: 1900 - total flux cleaned = -0.00853953 Jy ! Component: 1950 - total flux cleaned = -0.00853954 Jy ! Component: 2000 - total flux cleaned = -0.00849775 Jy ! Component: 2050 - total flux cleaned = -0.00849754 Jy ! Component: 2100 - total flux cleaned = -0.00853965 Jy ! Component: 2150 - total flux cleaned = -0.0085824 Jy ! Component: 2200 - total flux cleaned = -0.00862464 Jy ! Component: 2250 - total flux cleaned = -0.0087115 Jy ! Component: 2300 - total flux cleaned = -0.00871198 Jy ! Component: 2350 - total flux cleaned = -0.00875628 Jy ! Component: 2400 - total flux cleaned = -0.00880244 Jy ! Component: 2450 - total flux cleaned = -0.00880221 Jy ! Component: 2500 - total flux cleaned = -0.00884886 Jy ! Component: 2550 - total flux cleaned = -0.00889651 Jy ! Component: 2600 - total flux cleaned = -0.00889654 Jy ! Component: 2650 - total flux cleaned = -0.00894577 Jy ! Component: 2700 - total flux cleaned = -0.00899585 Jy ! Component: 2750 - total flux cleaned = -0.00904639 Jy ! Component: 2800 - total flux cleaned = -0.00904652 Jy ! Component: 2850 - total flux cleaned = -0.00909908 Jy ! Component: 2900 - total flux cleaned = -0.00915204 Jy ! Component: 2950 - total flux cleaned = -0.00920597 Jy ! Component: 3000 - total flux cleaned = -0.00931528 Jy ! Component: 3050 - total flux cleaned = -0.00942704 Jy ! Component: 3100 - total flux cleaned = -0.00937014 Jy ! Component: 3150 - total flux cleaned = -0.00936886 Jy ! Component: 3200 - total flux cleaned = -0.00942753 Jy ! Component: 3250 - total flux cleaned = -0.00936679 Jy ! Component: 3300 - total flux cleaned = -0.00936755 Jy ! Component: 3350 - total flux cleaned = -0.00936733 Jy ! Component: 3400 - total flux cleaned = -0.00930428 Jy ! Component: 3450 - total flux cleaned = -0.0093038 Jy ! Component: 3500 - total flux cleaned = -0.00923827 Jy ! Component: 3550 - total flux cleaned = -0.00930456 Jy ! Component: 3600 - total flux cleaned = -0.00923567 Jy ! Component: 3650 - total flux cleaned = -0.00923476 Jy ! Component: 3700 - total flux cleaned = -0.00923443 Jy ! Component: 3750 - total flux cleaned = -0.00916139 Jy ! Component: 3800 - total flux cleaned = -0.00923461 Jy ! Component: 3850 - total flux cleaned = -0.00923443 Jy ! Component: 3900 - total flux cleaned = -0.00923594 Jy ! Component: 3950 - total flux cleaned = -0.00931435 Jy ! Component: 4000 - total flux cleaned = -0.00939499 Jy ! Component: 4050 - total flux cleaned = -0.00947754 Jy ! Total flux subtracted in 4096 components = -0.00939356 Jy ! Clean residual min=-0.004251 max=0.004429 Jy/beam ! Clean residual mean=0.000032 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 0.82792 Jy keep ! Adding 205 model components to the UV plane model. ! The established model now contains 262 components and 0.82792 Jy ![Exited script file: muppet] wmap "J1522-2730_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 9.027 at -3.363 degrees (North through East) ! Clean map min=-0.0092314 max=0.7753 Jy/beam ! Writing clean map to FITS file: J1522-2730_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.775298 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00130725 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.505836 0.505836 1.01167 2.02335 4.04669 8.09338 16.1868 32.3735 64.7471 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.775 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 9.027 at -3.363 degrees (North through East) ! Clean map min=-0.0092314 max=0.7753 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1522-2730_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:02:23 2019